Porodo

Lavalier Microphones
with Type-C Connector
and Lightning Adapter
SKU: PD-WCDMIC-BK
 Table of Contents

Schematic View 2

Specifications 2

Instructions for Use 3

[A] Power On/Off 3

[B] Initial Use and Pairing Guide 3

[C] When Connected 3

Mute Function 4

Noise Cancellation 4

Turning Off the Microphone 4

Charging Instructions 5

Indicator Guide 5

Package Contents 6

Troubleshooting 6

Warranty 7

Contact Us 7

1
 Schematic View
5
3 6
10 8
4
2

1 7 9
Charging Case Microphone Receiver
(MIC) (RX)
1. Type-C Charging port 7. Mic Charging Port
2. Charging Case Power Display 8. RX Type-C/lightning port
3. Mic On/Off Button 9. RX Type-C/lightning
4. Mic M Button (Mute/Noise Cancellation) charging port
5. Mic Connection/Noise Cancellation Indicator 10. RX indicators
6. Mute Indicator

Specifications

[A] Microphones
Latency 20ms
Frequency 2.4GHz
Frequency Response Range 50HZ-18KHZ
Sensitivity -38±2dB
SNR 68dB
Battery Capacity 90mAh
Working Time 7H
Recharge Time 1.5H
[B] Receiver
Latency 20ms
Frequency Range 2.4GHz
Frequency Response 50HZ-18KHZ
[C] Charging Case
Battery Capacity 600mAh
Charging Time 2 Times (Up to 16H)
Recharge Time 1.5H

2
 Instructions for Use

[A] Power On/Off

Step 1: Press and hold the On/Off button on the microphone for 3 seconds. The
indicators will turn green and red.
Green light light
Mic On/Off Red light

Step 2: Connect the receiver (RX) to your phone. Once connected, the RX indicator
should turn green.
No light

Green light
If the RX indicator does not light up green, please:
a. Ensure your phone’s OTG setting is enabled. You may need to search for "OTG"
in your phone settings to turn on the OTG power supply.
b. Remove any case from your phone. After removing the case, reconnect the
RX to your phone.

[B] Initial Use and Pairing Guide

1. Upon first use, both the microphone (MIC) and receiver (RX) will automatically
enter pairing mode.
2. During this mode, the indicators on the MIC and RX will flash alternately in
green and red.
3. Once the MIC and RX are successfully paired, the indicators will remain solid
green and cease to blink.

[C] When Connected

Green light light
No light

Green light
MIC RX
3
After the microphone (MIC) and receiver (RX) are connected, the MIC is ready for
use. Launch any recording or live video app to capture audio.
Note: Some phones may not support using an external microphone with the built-in
camera app. If your recordings have no sound, consider downloading alternative
camera apps, such as OpenCamera, to ensure audio capture.

Mute Function
To mute the microphone, double-click the 'M' button. The indicator light will turn
red to signify that the microphone is in mute mode. Double-click the button again
to deactivate mute and resume normal operation.

In mute function, the indicator light is red.

Double-press the M button.

Noise Cancellation

1. When the microphone (MIC) is connected to the receiver (RX), noise cancellation
is automatically enabled.
2. To toggle noise cancellation, press the 'M' button once to turn it off and press
again to turn it back on.
3. When noise cancellation is active, the indicator turns on with solid green light.
When it is turned off, the indicator flashes with green light.

Noise cancellation indicator

The M button

Turning Off the Microphone

Press and hold the On/Off button on the microphone for three seconds to power
it off.

4
 Charging Instructions
1. Charging the Microphone
To charge the microphone (MIC) when the charging case is powered, place the
MIC inside the casing which will start the charging. Please ensure to remove any
stickers from the MIC before charging.
2. Charging the Case
Connect the charging case to power source using a charging cable. The case's
indicator lights will blink to display the current battery level.

3. Charging your Phone

You can charge your phone through the receiver's (RX) port. Use a Type-C cable
for phones with a Type-C port and a Lightning cable for phones with a Lightning
port.

Indicator Guide
MIC

Function Instruction Light Status

Press and hold the button for 3 seconds
Power On Red and green flashing light
to activate or deactivate the device.
Press and hold the button for 3 seconds
Power Off Light is off.
to reset the device.

Pairing _ Red and green flashing light

Paired _
Solid green light

Press the M button once to select or On: Solid green light

Noise Cancellation
confirm an option. Off: Flashing green light
Press the M button twice to toggle or cycle
Mute Solid red light
through settings.

Low Battery _ Flashing red light

To charge with the charging case, place the

Charging _
device in the charging case to recharge.

5
 Receiver

Function Instruction Light Status

Power On Device is turned on. Red and green flashing light

Power Off Device is turned off. Light is off.

Pairing _ Red and green flashing light

Paired _ Solid green light

Package Contents
1. Microphone
2. Receiver
3. Charging Case
4. Type-C Charging Cable

Troubleshooting

1. No Sound from Microphone

Please verify the status of the MIC and RX indicators.
a. Both indicators are turned on with solid green light.
Samsung Phones: Use alternative apps instead of the built-in camera to capture
sound.
Google and One Plus Phones: Check compatibility. Some models may not support
this microphone.
b. Indicator lights are flashing with green light.
OPPO and VIVO Phones: Ensure that OTG is enabled in your phone settings.

2. Why is there noise when recording video, audio, or live streaming?

Please try recording in a different location. It is recommended to avoid testing
near 2.4G signals, such as Wi-Fi networks, base stations, etc. If Wi-Fi is enabled,
please turn it off and try again.

3. Check the Battery Level of the Microphone and Charging Case

6
Microphone (MIC):
1. The MIC will automatically display the battery level as soon as it is turned on.
2. When the MIC is on, press the 'M' button to view the current battery level.
Charging Case:
1. When the charging case is charging the MIC, it will automatically display the
current battery level.
2. When the charging case itself is being charged, it will also automatically display
the current battery level.

Warranty

Products that you buy directly from our Porodo website or shop come with a
24-month warranty.

When you buy Porodo products from any of our approved sellers, you only get a
12-month warranty. If you want to extend this warranty, go to our website at
porodo.net/warranty and fill out the form with your information. Don't forget to
upload a picture of the product too. After we've checked and accepted your
request, we'll send you an email to confirm that your product's warranty has been
extended.

For more info, please check:

porodo.net/warranty

Contact Us

If you have any questions about this Privacy Policy, please contact us at:
info@porodo.net
Website: porodo.net
Service Support: support@porodo.net
Instagram: porodo