OWNER'S MANUAL

MINI CLUBMAN

Downloaded from www.Manualslib.com manuals search engine

 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 Cooper Congratulations on your new MINI
Cooper S This Owner's Manual should be considered a permanent part of
this vehicle. It should stay with the vehicle when sold to provide
John Cooper the next owner with important operating, safety and mainte-
Works nance information.
We wish you an enjoyable driving experience.

Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 Website : http://www.softlay.org

© 2008 Bayerische Motoren Werke

Aktiengesellschaft
Munich, Germany
Reprinting, including excerpts, only with the
written consent of
BMW AG, Munich.
US English VIII/08
Printed on environmentally friendly paper,
bleached without chlorine, suitable for recycling.

Downloaded from www.Manualslib.com manuals search engine

 CONTENTS
The fastest way to find information on a particu-
lar topic or item is by using the index, refer to

AT A GLANCE
page 146.

Using this Owner's Manual

4 Notes
6 Reporting safety defects

Website : http://www.softlay.org
AT A GLANCE
10 Cockpit

CONTROLS
CONTROLS
18 Opening and closing
29 Adjustments
35 Transporting children safely
38 Driving
48 Everything under control
57 Technology for driving comfort and safety
67 Lamps

DRIVING TIPS
72 Climate
77 Practical interior accessories

DRIVING TIPS
84 Things to remember when driving

MOBILITY
94 Refueling
96 Wheels and tires
105 Under the bonnet

MOBILITY
109 Maintenance
111 Care
115 Replacing components
125 Giving and receiving assistance
129 Indicator and warning lamps

REFERENCE
142 Technical data
REFERENCE

146 From A to Z

3
Downloaded from www.Manualslib.com manuals search engine
 Notes
Notes

Using this Owner's The individual vehicle

Manual The manufacturer of your MINI is the Bayerische
Motoren Werke Aktiengesellschaft, BMW AG.
We have tried to make all the information in this
Owner's Manual easy to find. The fastest way to When you ordered your MINI, you chose various
find specific topics is to refer to the detailed items of equipment. This Owner's Manual
index at the back of the manual. If you wish to describes the entire array of options and equip-
gain an initial overview of your vehicle, you will ment that the manufacturer of your MINI makes

Website : http://www.softlay.org
find this in the first chapter. available with a specific model range.
Should you wish to sell your MINI at some time in Bear in mind that the manual may contain infor-
the future, remember to hand over this Owner's mation on accessories and equipment that you
Manual to the new owner; it is an important part have not specified for your own vehicle. Sections
of the vehicle. describing options and special equipment are
marked by asterisks * to assist you in identifying
Additional sources of information possible differences between the descriptions in
Should you have any other questions, your MINI this manual and your own vehicle's equipment.
Dealer will be glad to advise you at any time. If your MINI features equipment not described in
You can find more information about the MINI, this Owner's Manual, observe the enclosed Sup-
for example on its technology, on the Internet at plementary Owner's Manuals.
www.MINI.com.

Symbols used Editorial notice

Indicates precautions that must be fol- The manufacturer pursues a policy of continu-
lowed precisely in order to avoid the pos- ous, ongoing development that is conceived to
sibility of personal injury and serious damage to ensure that MINI vehicles continue to embody
the vehicle.< the highest quality and safety standards com-
bined with advanced, state-of-the-art technol-
Indicates information that will assist you in
ogy. For this reason, it is possible in exceptional
gaining the optimum benefit from your
cases that features described in this Owner's
vehicle and enable you to care more effectively
Manual could differ from those on your vehicle.
for your vehicle.<
Refers to measures that can be taken to
help protect the environment.<
For your safety
< Marks the end of a specific item of information.
* Indicates special equipment, country-specific Maintenance and repair
equipment and optional extras, as well as equip- Advanced technology, e.g. the use of
ment and functions not yet available at the time modern materials and powerful electron-
of printing. ics, requires specially adapted maintenance and
repair methods. Therefore, have the necessary
Symbols on vehicle components work on your MINI only carried out by a MINI
Indicates that you should consult the rele- Dealer or a workshop that has specially trained
vant section of this Owner's Manual for personnel working in accordance with the spec-
information on a particular part or assembly. ifications of the MINI manufacturer. If this work

4
Downloaded from www.Manualslib.com manuals search engine
 is not carried out properly, there is a danger of Maintenance, replacement, or repair of
subsequent damage and related safety haz- the emission control devices and systems
ards.< may be performed by any automotive repair
establishment or individual using any certified
Parts and accessories automotive part.<

AT A GLANCE
For your own safety, use genuine parts
and accessories approved by the manu- California Proposition 65 warning
facturer of the MINI. California law requires us to issue the following
When you purchase accessories tested warning:
and approved by the manufacturer of the MINI Engine exhaust and a wide variety of
and Original MINI Parts, you simultaneously automobile components and parts,

Website : http://www.softlay.org
acquire the assurance that they have been thor- including components found in the interior fur-
oughly tested by the manufacturer of the MINI nishings in a vehicle, contain or emit chemicals
to ensure optimum performance when installed known to the State of California to cause cancer

CONTROLS
on your vehicle. and birth defects and reproductive harm. In
The manufacturer of the MINI warrants these addition, certain fluids contained in vehicles and
parts to be free from defects in material and certain products of component wear contain or
workmanship. emit chemicals known to the State of California
to cause cancer and birth defects or other repro-
The manufacturer of the MINI will not accept any
ductive harm.
liability for damage resulting from installation of
parts and accessories not approved by the man- Battery posts, terminals and related accessories
ufacturer of the MINI. contain lead and lead compounds. Wash your
hands after handling.
The manufacturer of the MINI cannot test every

DRIVING TIPS
product made by other manufacturers to verify Used engine oil contains chemicals that have
if it can be used on a MINI safely and without risk caused cancer in laboratory animals. Always
to either the vehicle, its operation, or its occu- protect your skin by washing thoroughly with
pants. soap and water.<

Original MINI Parts, MINI Accessories and other

products approved by the manufacturer of the
MINI, together with professional advice on using
Service and warranty
these items, are available from all MINI Dealers. We recommend that you read this publication
Installation and operation of non-MINI thoroughly.

MOBILITY
approved accessories such as alarms, radios, Your MINI is covered by the following warran-
amplifiers, radar detectors, wheels, suspension ties:
components, brake dust shields, telephones,
> New Vehicle Limited Warranty
including operation of any mobile phone from
within the vehicle without using an externally > Rust Perforation Limited Warranty
mounted antenna, or transceiver equipment, for > Federal Emissions System Defect Warranty
instance, CBs, walkie-talkies, ham radios or sim-
> Federal Emissions Performance Warranty
ilar accessories, may cause extensive damage to
the vehicle, compromise its safety, interfere with > California Emission Control System Limited
the vehicle's electrical system or affect the valid- Warranty
REFERENCE

ity of the MINI Limited Warranty. See your MINI Detailed information about these warranties is
Dealer for additional information.< listed in the Service and Warranty Information
Booklet for US models or in the Warranty and
Service Guide Booklet for Canadian models.

5
Downloaded from www.Manualslib.com manuals search engine
 Reporting safety defects
Notes
For US customers
The following applies only to vehicles owned
and operated in the US.
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you should immediately inform the
National Highway Traffic Safety Administration,
NHTSA, in addition to notifying MINI of North
America, LLC, P.O. Box 1227, Westwood, New

Website : http://www.softlay.org
Jersey 07675-1227, Telephone 1-800-831-
1117.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order
a recall and remedy campaign. However, NHTSA
cannot become involved in individual problems
between you, your dealer, or MINI of North
America, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236
(TTY: 1-800-424-9153);
go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh Street, SW.,
Washington, DC 20590. You can also obtain
other information about motor vehicle safety
from http://www.safercar.gov

For Canadian customers

Canadian customers who wish to report a
safety-related defect to Transport Canada,
Defect Investigations and Recalls, may call
1-800-333-0510 toll-free from anywhere in
Canada or 1-613-993-9851 from the Ottawa
region and from other countries, or contact
Transport Canada by mail at: Transport Canada,
ASFAD, Place de Ville, Tower C, 330 Sparks
Street, Ottawa, ON, K1A 0N5.
You can also obtain other information about
motor vehicle safety from http://www.tc.gc.ca

6
Downloaded from www.Manualslib.com manuals search engine
 AT A GLANCE
Website : http://www.softlay.org

CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE

7
Downloaded from www.Manualslib.com manuals search engine
 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 AT A GLANCE

AT A GLANCE

Website : http://www.softlay.org
CONTROLS

DRIVING TIPS

MOBILITY

REFERENCE

Downloaded from www.Manualslib.com manuals search engine

 Cockpit
Cockpit

Around the steering wheel: Controls and displays

Website : http://www.softlay.org

1 Adjusting the exterior mirrors, folding them High beams 69

in and out* 33 Headlamp flasher 42
2
Parking lamps 67 Roadside parking lamps* 69

Low beams 67 Computer* 49

Automatic headlamp control* 67

3 Tachometer 12

Turn signals 42 Instrument lighting 70

Resetting the trip odometer 48

10
Downloaded from www.Manualslib.com manuals search engine
 4
Wiper system 43

5 Switching the ignition on/off and

starting/stopping the engine 38

AT A GLANCE
6 Ignition lock 38
7 Buttons* on steering wheel
Continuing cruise control* 45

Right:

Website : http://www.softlay.org
Storing speed and accelerating or
decelerating
Left:

CONTROLS
Volume

Activating/deactivating cruise
control* 46

Telephone*:
Accepting and ending a call, start-
ing dialing* of selected phone

DRIVING TIPS
number and redialing if no phone
number is selected
Activating/deactivating voice com-
mand system*

Changing radio station

Selecting music track
Scrolling through phone book and
lists with stored phone numbers

MOBILITY
8 Horn: the entire surface
9 Adjusting the steering wheel 34
10 Releasing the bonnet 105
REFERENCE

11
Downloaded from www.Manualslib.com manuals search engine
 Displays
Cockpit

Website : http://www.softlay.org

1 Tachometer 48 4 Display for

with indicator and warning lamps 13 > Position of automatic transmission* 40
2 Display for > Computer* 49
> Clock 48 > Date of next scheduled service, and
> Outside temperature 48 remaining distance to be driven 53

> Current vehicle speed 48 > Odometer and trip odometer 48

> Indicator and warning lamps 13 > Initializing the Flat Tire Monitor* 60

3 Resetting the trip odometer 48 > Resetting the Tire Pressure Monitor* 62
> Settings and information 50
> Personal Profile settings 18
5 Instrument lighting 70
6 Speedometer
with indicator and warning lamps 13
7 Fuel gauge 49
8 Radio display, refer to separate Owner's
Manual
9 Radio, refer to separate Owner's Manual

12
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning
lamps
The concept

AT A GLANCE
Website : http://www.softlay.org

CONTROLS
Indicator and warning lamps can light up in various
combinations and colors in indicator area 1 or 2.
Some lamps are checked for proper functioning
and thus come on briefly when the engine is
started or the ignition is switched on.

What to do in case of a malfunction

A list of all indicator and warning lamps, as well
as notes on possible causes of malfunctions and

DRIVING TIPS
on how to respond, can be found starting on
page 129.

MOBILITY
REFERENCE

13
Downloaded from www.Manualslib.com manuals search engine
 Around the center console
Cockpit

Website : http://www.softlay.org

14
Downloaded from www.Manualslib.com manuals search engine
 1 Microphone for voice command system*
and for telephone in hands-free mode* Maximum cooling* 75

2 Indicator/warning lamp* for front passen-

ger airbags 66 Cooling function 73, 76

AT A GLANCE
Reading lamps* 70 Defrosting windows* 74, 76

Color of ambient lighting* 71 Rear window defroster 73, 75

Glass sunroof, electric* 27 Windshield heating* 74, 76

Website : http://www.softlay.org
Interior lamps 70 Air flow rate 73, 74

9 Switches in center console

CONTROLS
4 Hazard warning flashers
5 Speedometer 12 Seat heating* 32
6 Drive for audio CDs
7 Switching audio sources on/off and adjust- Power windows 28
ing volume
8 Air conditioner or automatic climate con- Rear fog lamp* 70
trol*
Central locking system, inside 22
Temperature 73, 75

DRIVING TIPS
Fog lamps* 70
Recirculated-air mode 73, 75

Automatic recirculated-air control

10 AUX-In port, USB-audio interface* 79
AUC* and recirculated-air mode 75
11 Driving stability control systems
Air distribution for air
conditioner 73 > Dynamic Stability Control DSC 58
Air distribution to the > Dynamic Traction Control DTC* 58
windshield* 75 12 Sport button* 60

MOBILITY
Air distribution to the upper body
area* 75

Air distribution to the footwell* 75

Automatic air distribution and flow

rate* 75
REFERENCE

15
Downloaded from www.Manualslib.com manuals search engine
 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 AT A GLANCE

Website : http://www.softlay.org CONTROLS

CONTROLS

DRIVING TIPS

MOBILITY

REFERENCE

Downloaded from www.Manualslib.com manuals search engine

 Opening and closing
Opening and closing

Keys/remote controls Integrated key

Website : http://www.softlay.org Press button 1 to release the key.

Remote control The integrated key fits the following locks:
Each remote control contains a rechargeable > Driver's door, page 22
battery that is recharged when it is in the igni-
tion lock while the car is being driven. You
should therefore use each remote control at Personal Profile
least twice a year to maintain the charge status.
In vehicles equipped with convenient access*,
The concept
the remote control contains a replaceable bat-
tery, page 27. The functions of your MINI can be set individu-
ally. By means of Personal Profiles, most of these
If more than one remote control is used, the set-
settings are stored for the remote control cur-
tings called up and implemented depend on
rently in use. When you unlock the car, the
which remote control is recognized when the
remote control is recognized and the settings
car is unlocked, refer to Personal Profile,
stored for it are called up and implemented.
page 18.
This means that your settings will be activated
In addition, information about service require-
for you, even if in the meantime your car was
ments is stored in the remote control, refer to
used by someone else with another remote con-
Service data in the remote control, page 109.
trol and the corresponding settings.

New remote controls At most three remote controls can be set for
three different people. A prerequisite is that
Your MINI Dealer can supply new remote con-
each person uses a separate remote control.
trols as additional units or as replacements in the
event of loss.
Personal Profile settings
For more information on specific settings, refer
to the specified pages.
> Response of the central locking system
when the car is being unlocked 19
> Automatic locking of the vehicle 22
> Triple turn signal activation 42

18
Downloaded from www.Manualslib.com manuals search engine
 > Settings for the displays on the onboard The anti-theft system is also operated at the
monitor, in the speedometer and in the same time. It prevents the doors from being
tachometer. unlocked using the lock buttons or door han-
> 12h/24h mode of the clock, refer to For- dles. The remote control can also be used to
mats and units of measure 51 switch on/off the welcome lamps and interior

AT A GLANCE
lamps. The alarm system* is also activated or
> Date format, refer to Formats and units
deactivated (page 24).
of measure 51
> Units of measure for fuel consumption, Operating from inside
distance covered/remaining distances
Button for central locking system, page 22.
and temperature, refer to Formats and
units of measure 51 In the event of a sufficiently severe accident, the

Website : http://www.softlay.org
central locking system unlocks automatically. In
> Light settings:
addition, the hazard warning flashers and inte-
> Pathway lighting 67 rior lamps come on.

CONTROLS
> Daytime running lamps 68
> Automatic climate control*: AUTO program,
activating/deactivating cooling function and Opening and closing:
automatic recirculated-air control, setting from outside
temperature, air flow rate and
distribution 74 Persons or animals in a parked vehicle
> Entertainment: could lock the doors from the inside. Take
the key with you when you leave the vehicle so
> Audio volume, refer to separate Owner's that the vehicle can be opened from the out-
Manual

DRIVING TIPS
side.<
> Speed-dependent volume, refer to sepa-
rate Owner's Manual Using the remote control

Unlocking
Central locking system Press the button.
The welcome lamps and interior lamps come on.
The concept
The central locking system is ready for operation Unlocking mode
whenever the driver's door is closed. You can also set which parts of the car are

MOBILITY
The system simultaneously engages and unlocked. The setting is stored for the remote
releases the locks on the following: control in use.
> Doors
> Splitdoor
> Fuel filler door

Operating from outside

> Via the remote control
REFERENCE

> Via the door lock*

> In cars with convenient access*, via the door
handles on the driver's and passenger's
sides

19
Downloaded from www.Manualslib.com manuals search engine
 1. Switch on the ignition, refer to page 38. 8. Briefly press the button to select:
Opening and closing
2. Briefly press the button in the turn indicator >
lever repeatedly until "SET/INFO" is dis- Press the button once to unlock
played. only the driver's door and the fuel filler
door.
Press the button twice to unlock the
entire vehicle.
>
Press the button once to unlock
the entire vehicle.
9. Press and hold the button until the display

Website : http://www.softlay.org
changes. The setting is stored for the remote
control currently in use.

3. Press and hold the button until the display Convenient opening
changes.
Hold the button down.
4. Briefly press the button repeatedly until the The power windows are opened and the glass
symbol and "SET" are displayed. sunroof* is raised.
Convenient closing is not possible by
means of the remote control.<

Locking
Press the button.
Do not lock the vehicle from the outside if
there is any person inside, because the
vehicle cannot be unlocked from inside without
special knowledge.<
5. Press and hold the button until the display
Setting confirmation signals
changes.
To have the vehicle confirm when it has been
6. Briefly press the button repeatedly until the
locked or unlocked.
display shows the illustrated symbol, arrow.
1. Switch on the ignition, refer to page 38.
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.

7. Press and hold the button until the display

changes.

3. Press and hold the button until the display

changes.

20
Downloaded from www.Manualslib.com manuals search engine
 4. Briefly press the button repeatedly until the Unlocking the splitdoor
symbol and "SET" are displayed. Press the button.
When it is opened, the splitdoor swings
upward and outward to the rear. Ensure
that there is sufficient clearance.

AT A GLANCE
To prevent accidentally locking yourself out, do
not place the key down in the cargo bay. If the
splitdoor was locked before opening, it will be
locked again after it is closed.
Before and after each trip, check that the split-
door has not been inadvertently unlocked.<

Website : http://www.softlay.org
5. Press and hold the button until the display
Malfunctions
changes.
The remote control may malfunction due to
6. Briefly press the button to select, arrow:

CONTROLS
local radio waves. If this occurs, unlock and lock
> Confirmation signal during unlocking the car at the door lock with the integrated key.
> Confirmation signal during locking If the car can no longer be locked with a remote
control, the battery in the remote control is dis-
charged. Use this remote control during an
extended drive; this will recharge the battery,
page 18.

For US owners only

DRIVING TIPS
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communications
7. Press and hold the button until the display Commission regulations. Operation is governed
changes. by the following:
8. Briefly press the button to select: FCC ID:
> LX8766S
The hazard warning flashers light up dur- LX8766E
ing unlocking/locking. LX8CAS

> Compliance statement:

MOBILITY
An acoustic signal sounds during unlock- This device complies with part 15 of the FCC
ing/locking. Rules. Operation is subject to the following two
conditions:
>
The hazard warning flashers light up and > This device must not cause harmful interfer-
an acoustic signal* sounds during ence, and
unlocking/locking. > This device must accept any interference
9. Press and hold the button until the display received, including interference that may
changes. The setting is stored. cause undesired operation.
Any unauthorized modifications or
REFERENCE

Switching on interior lamps changes to these devices could void the

While the car is locked: user's authority to operate this equipment.<
Press the button.
You can also use this function to locate your
vehicle in parking garages, etc.

21
Downloaded from www.Manualslib.com manuals search engine
 Using the door lock Opening and closing:
Opening and closing
from inside

You can set which parts of the car are unlocked,

Website : http://www.softlay.org
page 19.
When there is no alarm system* or conve- The switch locks or unlocks the doors and split-
nient access*, only the driver's door is door when the doors are closed, but the anti-
locked with the door lock.< theft system is not activated. The fuel filler door
To lock all doors, the fuel filler door and splitdoor remains unlocked*.
together:
Unlocking and opening
With the doors closed, press the interior central
locking button (page 22) to lock the vehicle. > Either unlock the doors together using the
switch for the central locking system and
Unlocking and opening the driver or passenger
then pull the door handle above the armrest
door, page 22.
or
Locking the vehicle.
> pull on the door handle of either door twice:
> Lock the driver's door with the integrated the first time unlocks the door, the second
key via the door lock, or time opens it.
> press the safety lock button on the pas-
senger's door and close the door from Locking
the outside. > Press the switch or
> press down the safety lock button of a door.
Convenient operation To prevent you from being locked out, the
With an alarm system* or convenient access*, open driver's door cannot be locked using
the windows and glass sunroof* can be oper- the lock button.
ated via the door lock.
Persons or animals in a parked vehicle
Hold the key in the position for unlocking or could lock the doors from the inside. Take
locking. the key with you when you leave the vehicle so
Watch during the closing process to be that the vehicle can be opened from the out-
sure that no one is injured. Releasing the side.<
key stops the operation.<
Automatic locking
Manual operation You can also set the situations in which the car
In the event of an electrical malfunction, the locks. The setting is stored for the remote con-
driver's door can be unlocked or locked by turn- trol in use.
ing the integrated key in the door lock to the end
positions.

22
Downloaded from www.Manualslib.com manuals search engine
 1. Switch on the ignition, refer to page 38. locks the vehicle after some time if no
2. Briefly press the button in the turn indicator door has been opened.
lever repeatedly until "SET/INFO" is dis- >
played. The central locking system automatically
locks the vehicle as soon as you drive off.

AT A GLANCE
>
The central locking system automatically
locks the vehicle after some time if no
door has been opened, or as soon as you
drive off.
>

Website : http://www.softlay.org
The central locking system remains
unlocked.

3. Press and hold the button until the display 9. Press and hold the button until the display

CONTROLS
changes. changes. The setting is stored.

4. Briefly press the button repeatedly until the

symbol and "SET" are displayed. Clubdoor
Opening
The Clubdoor can only be opened using the han-
dle on the inside. The right-hand front door must
be open when opening the Clubdoor.

DRIVING TIPS
5. Press and hold the button until the display
changes.
6. Briefly press the button repeatedly until the
display shows the illustrated symbol, arrow.

MOBILITY
Closing
First close the Clubdoor, followed by the right-
hand front door.

Splitdoor
To avoid damage, make sure there is suf-
ficient clearance before opening the split-
7. Press and hold the button until the display door.<
REFERENCE

changes.
8. Briefly press the button to select:
Opening
In some national-market versions, the split-
>
door cannot be unlocked using the remote
The central locking system automatically
control unless the vehicle is unlocked first.

23
Downloaded from www.Manualslib.com manuals search engine
 Only drive with the splitdoor fully closed, otherwise > The car's inclination changes, for instance if
Opening and closing
the tail lamps will be obscured and driving safety an attempt is made to jack it up and steal the
will be compromised.< wheels or to raise it prior to towing away
> There is an interruption in the power supply
from the battery
The alarm system briefly indicates unauthorized
entry or tampering by means of:
> An acoustic alarm
> Switching on the hazard warning flashers

Arming and disarming

Website : http://www.softlay.org
Press the button in the handle or the but-
ton of the remote control for an extended time.
Whenever the car is locked or unlocked, the
alarm system is armed or disarmed.
Even when the alarm system is armed, you can
The splitdoor is unlocked.
open the tailgate by means of the button
Using the button in the handle, fully open first
on the remote control.
the right side, arrow 1, and then the left side of
When you subsequently close the tailgate it is
the splitdoor, arrow 2.
again locked and monitored.
Closing On certain national-market versions,
unlocking via the door lock triggers off the
Make sure that the closing path of the
alarm.<
splitdoor is clear, otherwise injuries may
occur.<
Panic mode*
You can activate the alarm system if you find
yourself in a dangerous situation.
Press the button for at least two seconds.
Switching off the alarm:
Press any button.

Switching off an alarm

> Unlock the car with the remote control.
Close the left side, arrow 1, and then the right > Insert the key fully into the ignition lock.
side of the splitdoor, arrow 2. > In cars with convenient access*, press the
button on the door lock.

Alarm system* Display on the revolution counter

When the system is armed, all LEDs pulse. After
The principle approx. 16 minutes one LED flashes.
The alarm system, when activated, reacts if:
> A door, the engine compartment lid or the
tailgate is opened
> There is movement inside the car

24
Downloaded from www.Manualslib.com manuals search engine
 > If pets are to remain inside the car

Switching off the tilt alarm sensor and

interior movement detector
> Press the button on the remote con-

AT A GLANCE
trol twice in succession.
> Lock the vehicle twice with the integrated
key.
LEDs flash in short succession for approx. 2 sec-
> LEDs pulse or LED flashes: system is armed. onds.
> One LED flashes at short intervals: The tilt alarm sensor and the interior movement

Website : http://www.softlay.org
A door, the bonnet or the tailgate is not detector are switched off until the car is next
properly closed. Even if these are not closed unlocked and locked.
fully, the remaining items are deadlocked

CONTROLS
and the LEDs pulse after approx. 10 seconds
for approx. 16 minutes. Afterwards, one LED Convenient access*
flashes.
Convenient access enables you to enter your
The interior movement detector is not acti-
vehicle without having to hold the remote con-
vated.
trol in your hand. All you need to do is wear the
> LEDs go out after the vehicle is unlocked: remote control close to your body, e.g. in your
No attempt was made to tamper with the jacket pocket. The vehicle automatically detects
car. the remote control within the immediate vicinity
> LEDs flash after unlocking until the key is

DRIVING TIPS
or in the passenger compartment.
inserted in the ignition, but for no longer Convenient access supports the following func-
than approx. 5 minutes: an attempt was tions:
made to tamper with the car.
> Unlocking/locking the vehicle
Tilt alarm sensor > Unlocking the splitdoor by itself
The vehicle's inclination is monitored. The alarm > Enginestarting
is triggered, for instance, if an attempt is made > Convenient operation
to steal the car's wheels or tow it away.
Functional requirements

MOBILITY
Interior movement detector > The vehicle or the splitdoor can only be
Before the interior movement detector can locked when the vehicle detects that the
operate correctly, the windows and glass roof remote control currently in use is outside of
must be closed. the vehicle.
> The vehicle cannot be locked or unlocked
Avoiding false alarms again until after approx. 2 seconds.
The tilt alarm sensor and the interior movement
> The engine can only be started when the
detector can be switched off together.
vehicle detects that the remote control is
This prevents false alarms, e.g. in the following inside the vehicle.
REFERENCE

situations:
> The doors and splitdoor must be closed to be
> In duplex garages able to operate the windows and glass sun-
> When being transported on car-carrying roof.
trains, ferries or trailers

25
Downloaded from www.Manualslib.com manuals search engine
 Comparison to standard remote controls Windows and glass sunroof, electric*
Opening and closing
In general, there is no difference between using If the engine is switched off, you can still operate
convenient access or pressing the buttons on the windows and glass sunroof so long as a door
the remote control to carry out the functions or the splitdoor has not been opened.
mentioned above. If the doors and splitdoor are closed again and
Instructions on opening and closing are found the remote control is located inside the vehicle,
starting on page 18. the windows and the glass sunroof can be oper-
Special features regarding the use of convenient ated again.
access are described below. Insert the remote control into the ignition lock to
If you notice a brief delay while opening or be able to operate the windows or glass sunroof
closing the windows or glass sunroof, the when the engine is switched off and the doors

Website : http://www.softlay.org
system is checking whether a remote control is are open.
inside the vehicle. Repeat the opening or closing
procedure, if necessary.< Switching on radio readiness
Switch on radio readiness by briefly pressing the
Unlocking start/stop button, page 38.
Do not depress the brake or the clutch,
otherwise the engine will start.<

Starting the engine

The engine can be started or the ignition can be
switched on when a remote control is inside the
vehicle. It is not necessary to insert a remote
control into the ignition lock, page 38.

Press button 1. Switching off the engine in cars with

Convenient opening with the remote control, automatic transmission
refer to page 20. The engine can only be switched off when the
selector lever is in position P, page 39.
Locking To switch the engine off when the selector lever
Press button 1. is in position N, the remote control must be in
the ignition lock.
For convenient closing, press and hold button 1.
The power windows and the glass sunroof* are
Before driving a vehicle with automatic
closed.
transmission into a car wash
1. Insert remote control into ignition lock.
Unlocking the splitdoor separately
Press the button on the outside of the splitdoor. 2. Depress the brake.

If the vehicle detects that a remote control 3. Move the selector lever to position N.
has been accidentally left inside the 4. Switch off the engine.
locked vehicle's cargo bay after the splitdoor is The vehicle can roll.
closed, the splitdoor will reopen slightly. The
hazard warning flashers flash and an acoustic
signal* sounds.<

26
Downloaded from www.Manualslib.com manuals search engine
 Malfunction Glass sunroof, electric*
Convenient access may malfunction due to local
radio waves. To prevent injuries, exercise care when
closing the glass sunroof and keep it in
If this happens, open or close the vehicle via the
your field of vision until it is shut.
buttons on the remote control or using the inte-

AT A GLANCE
Take the key with you when you leave the car,
grated key.
otherwise children could operate the sunroof
Insert the remote control into the ignition lock
and possibly injure themselves.<
and start the engine.

Warning lamps
The warning lamp comes on when an

Website : http://www.softlay.org
attempt is made to start the engine: the
engine cannot be started. The remote
control is not inside the vehicle or is malfunc-

CONTROLS
tioning. Take the remote control with you inside
the vehicle or have it checked. If necessary,
insert another remote control into the ignition
lock.
Raising
The warning lamp comes on when the
> Press the switch backward to the resistance
engine is running: the remote control is
point and hold it there.
no longer inside the vehicle. After the
Both glass sunroofs are raised.
engine is switched off, the engine can only be
Releasing the switch stops the movement.
restarted within approx. 10 seconds.

DRIVING TIPS
> With the ignition switched on, press the
The indicator lamp comes on: replace
switch backward beyond the resistance
the battery in the remote control.
point.
Both closed sunroofs are raised fully.
Replacing the battery Pressing again stops the movement.
The remote control for convenient access con-
tains a battery that will need to be replaced from Opening, closing
time to time.
With the ignition switched on and the glass sun-
1. Remove the cover. roof raised, press the switch backward and hold
it there.

MOBILITY
The front glass sunroof opens.
The rear glass sunroof is closed.
Releasing the switch stops the movement.
The glass sunroof can be closed in the same way
by pressing the switch forward.
The front glass sunroof remains in a raised posi-
tion. The rear glass sunroof is raised. Pressing on
the switch again closes both sunroofs com-
2. Insert the new battery with the plus side fac- pletely.
REFERENCE

ing up.
Roller sun blind
3. Press the cover on to close.
The roller sun blind can be opened and closed
Take the old battery to a battery collection
independently of the glass sunroof.
point or to your MINI Dealer.<

27
Downloaded from www.Manualslib.com manuals search engine
 Following interruptions in electrical After switching off the ignition
Opening and closing
power supply When the ignition is switched off, the windows
After a power failure, there is a possibility that can still be operated for approx. 1 minute as
the glass sunroof can only be raised. In this case, long as no door is opened.
have the system initialized. The manufacturer of Take the key with you when you leave the
your MINI recommends that you have this work car, otherwise children could operate the
done by your MINI Dealer. electric windows and possibly injure them-
selves.<

Windows Pinch protection system

To prevent injuries, exercise care when If the closing force exceeds a specific value as a

Website : http://www.softlay.org
closing the windows and keep them in window closes, the closing action is interrupted
your field of vision until they are shut. and the window reopens slightly.
Take the remote control with you when you Even though there is the pinch protection
leave the car, otherwise children could operate system, always ensure that the window's
the electric windows and possibly injure them- travel path is clear, otherwise the safety system
selves.< might fail to detect certain kinds of obstructions,
If, after a window is opened and closed such as thin objects, and the window would con-
several times in close succession, the win- tinue closing.
dow can only be closed and not opened, the sys- Do not install any accessories that might inter-
tem is overheated. Let the system cool for sev- fere with window movement. Otherwise the
eral minutes with the ignition switched on or the pinch protection system could be impaired.<
engine running.<
Closing without pinch protection
Opening, closing If there is an external danger, or if ice on the win-
dows, etc., prevents you from closing the win-
dows normally, the window can be closed man-
ually.
1. Press the switch upward and hold it there.
Pinch protection is limited and the window
reopens slightly if the closing force exceeds
a certain value.
2. Press the switch upward again within ap-
prox. 4 seconds and hold it there. The win-
> Press the switch downwards. dow closes without pinch protection.
The window opens until you release the
switch.
> Tap the switch downwards.
The window opens automatically if the igni-
tion is switched on. Tap the switch again to
stop the opening movement.
The window can be closed in the same way by
pressing the switch up.

28
Downloaded from www.Manualslib.com manuals search engine
 Adjustments

Sitting safely Head restraint

AT A GLANCE
A correctly adjusted head restraint reduces the
The ideal sitting position can make a vital contri- risk of neck injury in the event of an accident.
bution to relaxed, fatigue-free driving. In con-
Adjust the head restraint in such a way
junction with the safety belts, the head restraints
that its center is at approx. ear level. Oth-
and the airbags, the seated position has a major
erwise, there is an increased risk of injury in the
influence on your safety in the event of an acci-
event of an accident.<
dent. To ensure that the safety systems operate

Website : http://www.softlay.org
with optimal efficiency, we strongly urge you to Head restraints, refer to page 31.
observe the instructions contained in the follow-
ing section. Safety belt

CONTROLS
For additional information on transporting chil- Before every drive, make sure that all occupants
dren safely, refer to page 35. wear their safety belts. Airbags complement the
safety belt as an additional safety device, but
Airbags they do not represent a substitute.
Always maintain an adequate distance Never allow more than one person to
between yourself and the airbags. Always wear a single safety belt. Never allow
grip the steering wheel on the rim, with your infants or small children to ride in a passenger's
hands in the 3 o'clock and 9 o'clock positions, to lap.
minimize the risk of injury to the hands or arms Make sure that the belt in the lap area sits low

DRIVING TIPS
in the event of the airbag being triggered off. across the hips and does not press against the
No one and nothing is to come between the air- abdomen. The safety belt must not rest against
bags and the seat occupant. the throat, run across sharp edges, pass over
Do not use the cover of the front airbag on the hard or fragile objects or be pinched. Fasten the
front passenger side as a storage area. Ensure safety belt so that it is pulled taut across the lap
that the front passenger is correctly seated, e.g. and shoulder, fitting the body snugly without
that no feet or legs are propped against the any twists. Otherwise the belt could slide over
dashboard. Otherwise, leg injury could result if the hips in the event of a frontal collision and
the front airbag suddenly deployed. injure the abdomen. Avoid wearing bulky cloth-
Make sure that passengers do not lean their ing and regularly pull the belt in the upper-body

MOBILITY
heads against the side airbags, otherwise seri- area taut, otherwise its restraining effect could
ous injuries could result if the airbags suddenly be impaired.<
deployed.< Safety belts, refer to page 32.
Even if you follow all the instructions, injuries
resulting from contact with airbags cannot be
fully excluded, depending on the circumstances. Seats
The ignition and inflation noise may provoke a
mild hearing loss in extremely sensitive individ- Note before adjusting
uals. This effect is usually only temporary.
Never attempt to adjust your seat while
REFERENCE

For airbag locations and additional information the vehicle is moving. The seat could
on airbags, refer to page 65. respond with unexpected movement, and the
ensuing loss of vehicle control could lead to an
accident.

29
Downloaded from www.Manualslib.com manuals search engine
 On the front passenger seat as well, do not Backrest
Adjustments
incline the backrest too far to the rear while the
vehicle is being driven, otherwise there is a dan-
ger in the event of an accident of sliding under
the safety belt, eliminating the protection nor-
mally provided by the belt.<
Comply with the instructions on head restraint
height on page 31 and on damaged safety belts
on page 32.

Seat adjustment
Pull the lever, arrow 1, and apply your weight to

Website : http://www.softlay.org
Observe the instructions on page 29 to the backrest or lift it off, as necessary, arrows 2.
ensure the best possible personal protec-
tion.<
Lumbar support*
You can also adjust the contour of the backrest
to obtain additional support in the lumbar
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.

Longitudinal adjustment
Pull the lever, arrow 1, and slide the seat to the
desired position, arrows 2.
After releasing the lever, move the seat gently
forward or back to make sure it engages prop-
erly.
Turn the wheel to increase or decrease the cur-
Height vature.

Entry to the rear

Convenient entry
The convenient entry feature includes a
mechanical memory function for the longitudi-
nal adjustment and backrest angle.

Pull up or push down the lever repeatedly,

arrows 1, until the desired height is reached,
arrows 2.

30
Downloaded from www.Manualslib.com manuals search engine
 Height adjustment

AT A GLANCE
1. Pull up the lever on the seat backrest,
arrow 1. To raise: pull up.

Website : http://www.softlay.org
The backrest folds forward. To lower: press the button, arrow 1, and slide
2. Move the seat forward by pushing on the the head restraint down.
backrest, arrow 2.

CONTROLS
Removing
Previous position
1. Push the seat back into its previous position.
Do not fold the backrest up until the
seat is in its previous position. Other-
wise, the seat will engage in its current posi-
tion. In this case, adjust the longitudinal po-
sition manually, page 30.<

DRIVING TIPS
2. Fold the backrest back up to lock the seat.
When moving the seat backwards, ensure
that you do not cause personal injury or Front
property damage. 1. Pull up as far as it will go.
Before driving off, engage the front seats and
2. Fold the backrest forward slightly.
seat backrests. Otherwise there is a risk of acci-
dent due to unexpected movement.< 3. Press button 1 and pull the head restraint
out as far as it will go.
4. Additionally press button 2 and pull the
Head restraints head restraint out completely.

MOBILITY
5. Fold back the backrest.
A correctly adjusted head restraint reduces the
risk of neck injury in the event of an accident.
Rear
Adjust the head restraint in such a way
1. Pull up as far as it will go.
that its center is at approx. ear level. Oth-
erwise, there is an increased risk of injury in the 2. Press button 1 and pull the head restraint
event of an accident. Only remove a head out completely.
restraint if no one will be sitting on the seat in
question. Reinstall the head restraint before
REFERENCE

transporting anyone on that seat. Otherwise,

the passenger will be without protection from
the head restraint.<

31
Downloaded from www.Manualslib.com manuals search engine
 Seat heating* Closing
Adjustments
Make sure you hear the lock engage in the belt
buckle.
The upper belt anchor is suitable for adults of
any stature as long as the seat is adjusted prop-
erly, page 29.

Opening
1. Grasp the belt firmly.
2. Press the red button in the buckle.
3. Guide the belt into its reel.

Website : http://www.softlay.org
Switching on
Press once for each temperature level. Seat belt reminder
Three LEDs indicate the highest temperature.
If you continue driving within the next 15 min- Front seats
utes, the seat heating is automatically activated The indicator lamps come on and an
at the previously set temperature. acoustic signal sounds. Check whether
The temperature is lowered or the heating is the safety belt has been fastened cor-
switched off entirely to save on battery power. rectly. The 'Fasten safety belts'
The LEDs stay lit. reminder is issued when the driver's safety belt
has not been fastened. The 'Fasten safety belts'
Switching off reminder is also activated at road speeds above
approx. 5 mph or 8 km/h if the front passenger's
Press button longer.
safety belt has not been fastened, if objects are
placed on the front passenger seat, or if driver or
front passenger unfasten their safety belts.
Safety belts
Observe the instructions on page 29 to Damage to safety belts
ensure the best possible personal protec- If the safety belts are damaged or stressed
tion.< in an accident: have the safety belt system
Before every drive, make sure that all occupants and its seat-belt tensioners replaced and the
wear their safety belts. Airbags complement the belt anchors checked. Have this work carried out
safety belt as an additional safety device, but only by a MINI Dealer or by a workshop that has
they do not represent a substitute. specially trained personnel working in accor-
dance with the specifications of the MINI manu-
facturer, otherwise correct operation of these
Front and rear seats
safety systems is not ensured.<

32
Downloaded from www.Manualslib.com manuals search engine
 Mirrors Interior rearview mirror

Exterior mirrors
The front passenger's mirror is more con-

AT A GLANCE
vex than the driver's mirror. The objects
seen in the mirror are closer than they appear.
Do not gauge your distance from traffic behind
you on the basis of what you see in the mirror;
otherwise there is an increased risk of an acci-
dent.<
To reduce glare from vehicles behind you when

Website : http://www.softlay.org
you are driving at night:
Turn the knob.

CONTROLS
Interior mirror, automatic dimming*

1 Adjusting the left or right exterior mirror

2 Folding mirrors in and out*

DRIVING TIPS
Manual adjustment
The mirrors can also be adjusted manually: press
the edge of the glass. The automatic dimming feature of the interior
rearview mirror* is controlled by two photo cells
Folding mirrors in and out* in the mirror. One photo cell is in the mirror
frame, arrow; the other is on the back of the mir-
Turn the knob beyond the pressure point in
ror.
direction 2. The mirrors can be folded in at road
speeds up to approx. 20 mph/30 km/h. In order to ensure that the system functions cor-
rectly, keep the photo cells clean, do not cover
This can be beneficial in narrow streets, for
the area between the interior rearview mirror

MOBILITY
example, or for moving mirrors that were folded
and windshield, and do not affix adhesive labels
in by hand back out into their correct positions.
or stickers of any kind to the windshield directly
in front of the mirror.
Automatic heating*
At outside temperatures below a certain limit,
both exterior mirrors are automatically heated
while the engine is running or the ignition
switched on.
REFERENCE

33
Downloaded from www.Manualslib.com manuals search engine
 Steering wheel
Adjustments
Adjustments
Do not adjust the steering wheel position
while the car is in motion, otherwise there
is a risk of accident due to an unexpected move-
ment.<

Website : http://www.softlay.org
1. Fold the lever down.
2. Move the steering wheel to the preferred
distance and angle to suit your seated posi-
tion.
3. Swing the lever back up.
Do not use force to swing the lever
back up, otherwise the mechanism
will be damaged.<

34
Downloaded from www.Manualslib.com manuals search engine
 Transporting children safely

The right place for Child-restraint systems,

AT A GLANCE
children installation
Do not leave children unattended in the Observe the child-restraint system manu-
vehicle, otherwise they could endanger facturer's instructions when selecting,
themselves and/or other persons by opening the installing and using child-restraint systems. Other-
doors, for example.< wise the protective effect may be diminished.<

Website : http://www.softlay.org
Children should always sit in the rear On the front passenger seat
Accident research has shown that the safest After installing a child-restraint system on
place for children is on the rear seat. the front passenger seat, make sure that

CONTROLS
Only transport children under the age of the front and side airbags for the front passen-
13 or smaller than 5 ft/150 cm in the rear ger are deactivated, otherwise there is an
in a child-restraint system suitable for their age, increased risk of injury if the airbags deploy.<
weight and size. Otherwise there is an increased
risk of injury in the event of an accident.< Child seat security
Children 13 years of age or older must be buck-
led in with a safety belt as soon as there no
longer is any child-restraint system that is

DRIVING TIPS
appropriate for their age, size and weight.
Only install child seats in the rear when the
rear seat backrest is folded all the way
back and engaged. Otherwise there will be an
increased risk of injury in the event of an acci-
dent.<
All rear safety belts and the safety belt for the front
Exception for front passenger seat passenger can be prevented from being pulled out
in order to secure child-restraint systems.
Front passenger airbags

MOBILITY
Should it be necessary to use a child- To lock the safety belt
restraint system on the front passenger 1. Secure the child-restraint system with the
seat, the front and side airbags must be deacti- belt.
vated. Otherwise, there is an increased risk of 2. Pull the belt strap all the way out.
injury to the child if the airbags deploy, even if
the child is seated in a child-restraint system.< 3. Allow the belt strap to retract and pull it taut
against the child-restraint system.
For more information on automatic deactivation
of the front passenger airbags, refer to page 65. The safety belt is locked.
REFERENCE

To unlock the safety belt

1. Open the belt buckle
2. Remove the child-restraint system.
3. Allow the safety belt strap to retract all the
way.

35
Downloaded from www.Manualslib.com manuals search engine
 LATCH child-restraint Child-restraint system with tether strap
Transporting children safely
fixing system Use the tether strap anchors to secure
child-restraint systems only, otherwise the
LATCH: Lower Anchors and Tethers for CHildren. anchors could be damaged.<
To install and use the LATCH child-
restraint system, follow the operating and
safety instructions provided by the manufac-
turer of the system, otherwise the protective
function of the seat may be compromised.<

Anchor points for LATCH anchors

Website : http://www.softlay.org
Before installing the child's seat, pull the belt out
of the area for the child-restraint fixing system.
By way of example, the illustration shows the
cargo bay in the MINI.
There are two additional anchors for child-
restraint systems with tether straps, arrows.
When the vehicle is equipped with a level load
floor*, the anchors are covered. Their positions
are labeled.

Placement of the tether strap

The anchor points for the lower LATCH anchors
are located behind the labeled protective caps.
Make sure that the two LATCH anchors are
properly engaged and that the child-
restraint system rests firmly against the seat
backrest, otherwise the protective function of
the seat may be compromised.<

1 Direction of travel
2 Head restraint
3 Tether strap hook
4 Cargo bay floor
5 Anchor
6 Seat backrest
7 Tether strap of the child-restraint system

36
Downloaded from www.Manualslib.com manuals search engine
 Make sure the upper retaining strap does
not run over sharp edges and is not
twisted as it passes to the top anchor. Otherwise
the strap will not properly secure the child-
restraint system in the event of an accident.<

AT A GLANCE
1. Push the head restraint upward.
2. Guide the tether strap between the head
restraint holders.
3. Attach the tether strap to the anchor using
the hook.
4. Push the head restraint into its lowermost

Website : http://www.softlay.org
position.
5. Pull the retaining strap tight.

CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE

37
Downloaded from www.Manualslib.com manuals search engine
 Driving
Driving

Ignition lock Start/stop button

Inserting the key into the ignition lock

Website : http://www.softlay.org
Press the start/stop button to switch radio readi-
ness or the ignition on and off. Do not depress
Insert the key all the way into the ignition lock.
the brake or clutch while doing so.
Radio readiness
When you press the start/stop button and
Individual electrical consumers can operate.
depress the clutch if the car has manual
transmission or the brake if the car has auto-
Removing the key from the ignition lock matic transmission, the engine starts.<
Press in the key briefly. It is ejected slightly.
At the same time: Radio readiness
> The ignition is switched off if it was on Individual electrical consumers can operate. The
beforehand. time and outside temperature are displayed in
the tachometer.
Automatic transmission Radio readiness is switched off automatically:
You cannot take out the key unless the selector > When the key is removed from the ignition
lever is in the P position: interlock. lock
> When using convenient access* by pushing
the button on the door handle or the
button on the remote control, refer to Lock-
ing on page 26

Ignition on
Most indicator and warning lamps in indicator
area 1, page 13, light up for varying lengths of
time.
When the engine is off, switch off the igni-
tion and any unnecessary electrical con-
sumers in order to preserve the battery.<

38
Downloaded from www.Manualslib.com manuals search engine
 Radio readiness and ignition off Manual transmission
All indicator and warning lamps in the displays Key in ignition lock or inside vehicle with conve-
go out. nient access, refer to page 25.
The ignition automatically turns off* when the 1. Depress the brake.
driver's door is opened. Pressing the start/stop

AT A GLANCE
2. Depress the clutch.
button again switches the ignition back on.
3. Press the start/stop button.
The ignition is not switched off in situations such
as the following: Automatic transmission
> The clutch or brake is depressed Key in ignition lock or inside vehicle with conve-
> The low beams are switched on nient access, refer to page 25.

Website : http://www.softlay.org
1. Depress the brake.
Starting the engine 2. Move the selector lever to position P.
3. Press the start/stop button.

CONTROLS
Do not allow the engine to run in enclosed
spaces; otherwise inhalation of the noxious The starter operates automatically for a certain
exhaust gases can lead to unconsciousness and time, and stops automatically as soon as the
death. Exhaust gases contain carbon monoxide, engine has started.
an odorless and colorless, but highly toxic gas.
Never leave an unattended vehicle with the
engine running, otherwise such a vehicle repre- switching off THE Engine
sents a potential safety hazard.
Before leaving the car while the engine is running, Always take the key with you when you
place the transmission in neutral or move the leave the vehicle.

DRIVING TIPS
selector lever to position P and forcefully apply the When parking, apply the parking brake force-
parking brake to prevent the car from moving.< fully, otherwise the vehicle could begin to roll.<

Avoid frequent starting in quick succes-

Manual transmission
sion or repeated start attempts in which
the engine does not start. Otherwise, the fuel is 1. With the car at a standstill, press the start/
not burned or inadequately burned and there is stop button.
a danger of overheating and damaging the cat- 2. Shift into first gear or reverse.
alytic converter.< 3. Forcefully apply the parking brake.
Do not let the engine warm up with the vehicle

MOBILITY
at a standstill. Move off immediately at a moder- Automatic transmission
ate engine speed. 1. With the car at a standstill, move the selector
When starting the engine, do not depress the lever to position P.
accelerator pedal. 2. Press the start/stop button.
3. Forcefully apply the parking brake.
REFERENCE

39
Downloaded from www.Manualslib.com manuals search engine
 Parking brake Reverse gear
Driving
Select this only when the vehicle is stationary.
The parking brake is primarily intended to pre- When the gearshift lever is pressed to the left, a
vent the vehicle from rolling while parked; it slight resistance has to be overcome.
brakes the rear wheels.

Applying Automatic transmission*

The lever locks in position automatically.
with Steptronic
Releasing In addition to the fully automatic mode, you can
shift gears manually using Steptronic, page 41.

Website : http://www.softlay.org Parking the vehicle

To prevent the vehicle from rolling, always
select position P and apply the parking
brake before leaving the vehicle with the engine
running.<

Removing the key

Pull slightly upwards, press the button and lower 1. Move the selector lever to position P.
the lever. 2. Switch off the engine.
In exceptional cases, if the parking brake 3. Remove the key.
has to be used to slow or stop the car, do
not pull the lever up too hard. In doing so, con- Selector lever positions
tinuously press the button of the parking brake
P R N D M/S + –
lever.
Otherwise, excessive force could lead to over-
braking and loss of traction, i.e. fishtailing, at the
Displays in the tachometer
rear axle.<

Manual transmission

P R N D DS M1 to M6
The selector lever position is displayed, or the
current gear in the manual mode.

When shifting into 5th or 6th gear, press

the gearshift lever to the right. Otherwise
the engine could be damaged if you inadvert-
ently shift into 3rd or 4th gear.<

40
Downloaded from www.Manualslib.com manuals search engine
 Changing selector lever positions Kick-down
> The selector lever can only be moved out of Kick-down enables you to achieve maximum
position P if the ignition is switched on or the performance.
engine is running: interlock. Depress the accelerator pedal beyond the full-
> Before moving the lever away from P or N throttle resistance point.

AT A GLANCE
with the vehicle stationary, first depress the
brake; otherwise the selector lever will Sport program and manual operation
refuse to move: shiftlock. M/S
To prevent the vehicle from creeping
after you select a driving position, de-
press the brake until you are ready to start.<

Website : http://www.softlay.org
A lock prevents accidental shifting into selector
lever positions R and P.

CONTROLS
Overriding the selector lever lock

Move the selector lever from position D to the

left into the M/S shifting slot:
The Sport program is activated and DS is dis-
played.

Shifting with the selector lever

DRIVING TIPS
Push the selector lever forward or pull it back to
activate manual operation. Steptronic shifts the
Press the button on the front of the selector
gear.
lever, arrow.
> Pull the selector lever in the + direction.
P Park Transmission shifts up.

Select this only when the vehicle is stationary. > Push the selector lever in the – direction.
The transmission locks to prevent the drive Transmission shifts down.
wheels from turning. The tachometer displays M1 to M6.
To use the automatic mode again, move the

MOBILITY
R Reverse selector lever to the right into position D.
Select this only when the vehicle is stationary. Upshifts and downshifts are executed only when
they will result in a plausible combination of
N Neutral engine and vehicle speed; thus, for example, a
Select this when you are in a car wash, for exam- downshift that would cause the engine to over-
ple. The vehicle can roll. rev will not be executed by the system. The
selected gear is displayed briefly, followed by
D Drive, automatic position the actual gear.
REFERENCE

Position for normal vehicle operation. All for-

ward gears are selected automatically. Shifting on the steering wheel
Under normal operation conditions, fuel con- With the selector lever in position D, automatic
sumption is lowest when you drive in position D. drive, you can shift gears using the shift paddles
on the steering wheel. The transmission auto-
matically switches to manual mode.

41
Downloaded from www.Manualslib.com manuals search engine
 If you do not shift gears with the shift paddles or Turn signals/
Driving
accelerate for a certain amount of time, the
transmission automatically returns to D, auto- headlamp flasher
matic drive.

Website : http://www.softlay.org
> Pull one of the shift paddles.
1
2
Turn signal indicator
Headlamp flasher
Transmission shifts up.
> Push one of the shift paddles. Using turn signals
Transmission shifts down. Press the lever beyond the resistance point.
M1 to M6 is displayed in the gear indicator. To turn off manually, press the lever to the resis-
tance point.
Overriding the selector lever lock Unusually rapid flashing of the indicator
Should the selector lever refuse to move out of lamp indicates that an indicator bulb has
position P although the button on the selector failed.<
lever is pressed, the selector lever lock can be
overridden: Indicating a turn briefly
Press the lever as far as the resistance point for
1. Unclip the sleeve of the selector lever.
as long as you wish to indicate a turn.
2. Pull the sleeve up over the selector lever
until the sleeve is inside out. Disconnect the Triple turn signal activation
cable connector if necessary. Press the lever as far as the resistance point.
You can set whether the turn signal is to flash
once or three times.
1. Switch on the ignition, refer to page 38.
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.

3. Take the hub cover remover 1 out of the

onboard tool kit and insert it in the loop on
the front passenger side.
4. Pull the loop up.
5. Move the selector lever into the desired
position by pressing the button on the front
of the selector lever.

42
Downloaded from www.Manualslib.com manuals search engine
 3. Press and hold the button until the display Wiper system
changes.
4. Briefly press the button repeatedly until the
symbol and "SET" are displayed.

AT A GLANCE
Website : http://www.softlay.org
1 Switching on wipers
2 Switching off wipers or brief wipe
5. Press and hold the button until the display 3 Activating/deactivating intermittent mode

CONTROLS
changes. or rain sensor*
6. Briefly press the button repeatedly until the 4 Cleaning windshield and headlamps*
display shows the illustrated symbol, arrow.
Switching on wipers
Press the lever upward, arrow 1.
The lever automatically returns to its initial posi-
tion when released.

DRIVING TIPS
Normal wiper speed
Press once.
The system switches to intermittent operation
when the vehicle is stationary.
7. Press and hold the button until the display
changes. Fast wiper speed
8. Briefly press the button to select: Press twice or press beyond the resistance point.
The system switches to normal speed when the
>
vehicle is stationary.
Brief indication of a turn.

MOBILITY
> Intermittent wipe or rain sensor*
Triple turn signal.
If the car is not equipped with a rain sensor, the
9. Press and hold the button until the display intermittent-wipe time is preset.
changes. The setting is stored.
If the car is equipped with a rain sensor, the time
between wipes is controlled automatically and
depends on the intensity of the rainfall. The rain
sensor is mounted on the windshield, directly in
front of the interior rearview mirror.
REFERENCE

Activating intermittent wipe or rain

sensor
Press button, arrow 3.

43
Downloaded from www.Manualslib.com manuals search engine
 Deactivate the rain sensor before entering 5. Press and hold the button until the display
Driving
an automatic car wash. Failure to do so changes.
could result in damage caused by undesired
wiper activation.<

Adjusting the sensitivity of the rain

sensor
1. Switch on the ignition, refer to page 38.
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.

Website : http://www.softlay.org
6. Press the button to select the desired sensi-
tivity.
7. Wait, or press and hold the button until the
display changes.
The settings are stored.

Deactivating intermittent wipe or rain

sensor
Press the button again, arrow 3.

Brief wipe
Press the lever downward once, arrow 2.

Cleaning windshield and headlamps*

Pull the lever, arrow 4.
Washer fluid is sprayed onto the windshield and
the wipers are operated briefly.
When the vehicle lighting system is switched on,
3. Press and hold the button until the display the headlamps are cleaned at regular and
changes. appropriate intervals.
4. Briefly press the button repeatedly until the In cars equipped with an alarm system, the
symbol and "SET" are displayed. headlamps cannot be cleaned when the bonnet
is open.
Do not use the washers when the washer
fluid reservoir is empty, otherwise you will
damage the washer pump.
Only use the washers if the bonnet has been
completely closed, otherwise the headlamp
washer system* may be damaged. Do not use
the washers if there is any danger that the fluid
will freeze on the windshield. If you do, your
vision could be obscured. For this reason, use
antifreeze.<

44
Downloaded from www.Manualslib.com manuals search engine
 Window washer nozzles Washer fluid reservoir
The window washer nozzles are heated auto- Only refill washer fluid that contains anti-
matically* while the engine is running or the freeze when the engine is cool, to avoid
ignition is switched on. contact with hot engine parts. Otherwise, fluid
spills constitute a fire hazard and a risk to per-

AT A GLANCE
Rear window wiper sonal safety.<

Website : http://www.softlay.org

CONTROLS
0 Rear wipers parked Fill with water and, if required, with a washer
1 To switch on intermittent wipe : antifreeze, according to manufacturer's recom-
Turn the cap to level 1. mendations.
Operation is continuous in reverse gear. Mix the water and antifreeze before filling
the washer fluid reservoir to make sure
Cleaning the rear window the correct concentration is maintained.<
2 To clean the rear window during intermit-
Capacity

DRIVING TIPS
tent wipe :
Turn the cap further to level 2 and hold it Approx. 2.6 US quarts/2.5 liters.
there.
With headlamp washer system:
3 To clean the rear window when wipers are Approx. 4.8 US quarts/4.5 liters.
parked :
Turn the cap to level 3 and hold it there.
Do not use the washers when the washer Cruise control*
fluid reservoir is empty, otherwise you will
damage the washer pump.< The concept

MOBILITY
Cruise control is available at vehicle speeds of at
least approx. 20 mph or 30 km/h. The car then
Washer fluid stores and maintains the speed that you specify
Washer fluid antifreeze is flammable. using the button on the steering wheel.
Therefore, keep it away from ignition Do not use cruise control when driving at
sources, store it only in the closed original con- constant speed is prevented by adverse
tainer and keep it out of reach of children, oth- conditions, e.g. winding roads, dense traffic or
erwise there is a risk of personal injury. Comply poor road conditions due to, e.g., snow, rain, ice
with the instructions on the container.< or loose surfaces. Otherwise you could lose con-
trol of the vehicle and cause an accident as a
REFERENCE

result.<

45
Downloaded from www.Manualslib.com manuals search engine
 Activating Increasing speed
Driving
Press button 3 repeatedly until the desired
speed is reached. Every time you press the but-
ton, the speed increases by approx. 1 mph or
2 km/h.

Accelerating using the button

Press and hold button 3.
The vehicle accelerates without pressure on the
accelerator pedal. After the button is released,
1 Resuming cruise control the driving speed is maintained and stored.

Website : http://www.softlay.org
2
3
4
Activating/deactivating cruise control
Maintaining, storing and increasing speed
Maintaining, storing and decreasing speed
Decreasing speed
Press button 4 repeatedly until the desired
speed is reached.
Indicator lamp in the speedometer lights up. The
The functions here are the same as for increas-
cruise control system is ready and can be acti-
ing the speed or accelerating, except that the
vated.
speed will be decreased.

Activating/deactivating cruise control Resuming a speed stored beforehand

Press button 2. Press button 1.
In addition, the system is automatically deacti- The last speed stored is achieved again and
vated: maintained.
> When the brakes are applied The stored speed is cleared when the ignition is
> When the clutch is depressed switched off.
> When the automatic transmission is in selec-
tion lever position N Display in tachometer*
> When the driving stability control system is
active
Cruise control is not deactivated by depressing
the accelerator pedal. Once the accelerator
pedal is released, the stored speed is achieved
again and maintained.
The stored speed is cleared when the ignition is
switched off.

Maintaining current speed Selected speed is displayed briefly.

Press button 3. If --- mph or --- km/h is displayed briefly
The system maintains and stores the current in the tachometer, the conditions neces-
vehicle speed. sary for operation may not be fulfilled.<

If, on a downhill grade, the engine braking effect

Malfunction
is not sufficient, the controlled speed may be
exceeded. On uphill grades vehicle speed may The warning lamp in the tachometer
drop if the engine output is insufficient. lights up if the system fails.

46
Downloaded from www.Manualslib.com manuals search engine
 AT A GLANCE
Website : http://www.softlay.org

CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE

47
Downloaded from www.Manualslib.com manuals search engine
 Everything under control
Everything under control

Odometer, outside 1. Press the button in the turn indicator lever

repeatedly until the current speed appears
temperature display, in the lower display.
clock 2. Wait for the speed display to automatically
move to the upper display.
The outside temperature then appears in the
lower display.

Website : http://www.softlay.org Odometer and trip odometer

Resetting the trip odometer

With the ignition switched on, press knob 3 in
the tachometer.

1 Outside temperature display and clock or When the vehicle is parked

current speed
To display the time, outside temperature and
2 Odometer and trip odometer odometer briefly after the key is removed from
3 Resetting the trip odometer the ignition lock:
Press knob 3 in the tachometer.
Units of measure
Select the respective units of measure, miles or
km for the odometer as well as 7 or 6 for the Tachometer
outside temperature, page 51.

Outside temperature display, time

Setting the time, refer to page 54.

Outside temperature warning

When the displayed temperature sinks to
approx. +377/+36, a signal sounds and a
warning lamp lights up. There is an increased
risk of black ice.
Never operate the engine with the needle in the
Black ice can also form at temperatures
red overspeed zone of the gauge. In this range,
above +377/+36. You should therefore
the fuel supply is interrupted to protect the
drive carefully on bridges and shaded roads, for
engine.
example, otherwise there is an increased risk of
an accident.<

Current vehicle speed Coolant temperature

To have the current speed shown in the upper A warning lamp will come on if the coolant, and
display otherwise serving for the outside tem- therefore the engine, becomes too hot.
perature display and clock.
Check coolant level, refer to page 107.

48
Downloaded from www.Manualslib.com manuals search engine
 Fuel gauge Computer*
Displays in tachometer

AT A GLANCE
Website : http://www.softlay.org
Fuel tank capacity
You can find information on refueling on Press the button in the turn indicator lever
page 94. repeatedly to call up various items of informa-

CONTROLS
If the tilt of the vehicle varies for a longer period, tion.
when you are driving in mountainous areas, for The following items of information are displayed
example, the indicator may fluctuate slightly. in the order listed:
> Cruising range
MINI Cooper, MINI Cooper S
> Average fuel consumption
Approx. 13.2 US gallons/50 liters.
> Current fuel consumption
Reserve > Average speed

DRIVING TIPS
Once the fuel level has fallen to the reserve zone > Current vehicle speed
of approx. 2.1 gallons/8 liters, the remaining To set the corresponding units of measure, refer
indicator lamps change from orange to red, to Formats and units of measure on page 51.
arrow. The tachometer displays the remaining
cruising range. An indicator lamp comes on Cruising range
when the remaining range is less than approx. Displays the estimated cruising range available
30 miles/50 km. with the remaining fuel. The range is calculated
If the range displayed is less than on the basis of the way the car has been driven
30 miles/50 km, be sure to refuel; other- over the last 18 miles/30 km and the amount of
wise engine functions are not guaranteed and fuel currently in the tank.

MOBILITY
damage could occur.< If the range displayed is less than
30 miles/50 km, be sure to refuel; other-
wise engine functions are not guaranteed and
damage could occur.<

Average fuel consumption

Calculated for the time the engine has been run-
ning.
REFERENCE

To reset average fuel consumption: press the

button in the turn indicator lever for approx.
2 seconds.

49
Downloaded from www.Manualslib.com manuals search engine
 Current fuel consumption 1. Press the button in the turn indicator lever
Everything under control
Displays the current fuel consumption to allow repeatedly until the current speed appears
you to see whether your current driving style is in the lower display.
conducive to fuel economy with minimum 2. Wait for the speed display to automatically
exhaust emissions. move to the upper display.
The outside temperature then appears in the
Average speed lower display of the computer.
Periods with the vehicle parked and the engine
switched off are not included in the calculations
of average speed.
To reset average speed: press the button in the

Website : http://www.softlay.org
turn indicator lever for approx. 2 seconds.

Current vehicle speed

To have the current speed shown in the upper
display otherwise serving for the outside tem-
perature display and clock.

Settings and information

Operating principle

Certain settings and information are only avail-

able when the ignition is switched on, the vehi-
cle is at a standstill and the doors are closed.

50
Downloaded from www.Manualslib.com manuals search engine
 1 Button for: 6 Adjusting settings
> Selecting display > Confirmation signals when locking and
> Setting values unlocking the vehicle 20

> Confirming selected display or set values > Response during unlocking
procedure 19

AT A GLANCE
> Calling up computer information 49
> Automatic locking 22
2 Calling up Check Control 55
> Pathway lighting 67
3 Displaying vehicle check 56
> Daytime running lamps 68
4 Initializing the Flat Tire Monitor 60
Resetting the Tire Pressure Monitor 62 > Triple turn signal activation 42

5 Setting formats and units of measure, reset- 7 Setting the time 54

Website : http://www.softlay.org
ting to factory settings 52 8
9
Setting the date 55
Exiting the menu

CONTROLS
Exiting displays Next setting or item of information

DRIVING TIPS
1. Briefly press the button in the turn indicator 1. Within a setting or item of information,
lever repeatedly until "HOME" is displayed. briefly press the button in the turn indicator
2. Press the button for a longer period. lever repeatedly until "NEXT" is displayed.

The display again shows the outside tempera- 2. Press the button for a longer period.
ture and the time. The display changes directly to the next setting
Displays are also exited if no entries are made or item of information.
for approx. 8 seconds.

MOBILITY
Formats and units of
measure
To set the formats and units of measure. The set-
tings are stored for the remote control currently
in use, refer also to Personal Profile on page 18.
REFERENCE

51
Downloaded from www.Manualslib.com manuals search engine
 1. Switch on the ignition, refer to page 38. 7. Press and hold the button until the display
Everything under control
2. Briefly press the button in the turn indicator changes.
lever repeatedly until "SET/INFO" is displayed. 8. Press the button briefly to change the for-
mat or unit of measure.
9. Press and hold the button until the display
changes.
The settings are stored.

Resetting to factory settings

The settings for formats and units of measure
can be reset to the factory settings. The settings

Website : http://www.softlay.org
are stored for the remote control currently in
use, refer also to Personal Profile on page 18.
3. Press and hold the button until the display
changes. 1. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
4. Briefly press the button repeatedly until the
played.
symbol and "SET" are displayed.

5. Press and hold the button until the display

2. Press and hold the button until the display
changes.
changes.
6. Briefly press the button repeatedly until the
3. Briefly press the button repeatedly until the
display shows the illustrated symbol, arrow.
symbol and "SET" are displayed.

> Fuel consumption: l/100 km, mpg,

km/l* 4. Press and hold the button until the display
> Distance covered: mls, km changes.
> Time: 12h, 24h mode
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6

52
Downloaded from www.Manualslib.com manuals search engine
 5. Briefly press the button repeatedly until Displaying vehicle check
"RESET" is displayed. For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the tachometer.
1. Switch on the ignition, refer to page 38.

AT A GLANCE
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.

Website : http://www.softlay.org
6. Press and hold the button until the display
changes to the first setting.
The settings are reset.

CONTROLS
Service requirements
3. Press and hold the button until the display
changes.
4. Briefly press the button repeatedly until the
corresponding symbol and "SERVICE-INFO"
are displayed.

DRIVING TIPS
The remaining driving distance and the date of
the next scheduled service are briefly displayed
immediately after you start the engine or switch
on the ignition.
The extent of service work required can be

MOBILITY
read out from the remote control by your 5. Press and hold the button until the display
MINI Dealer.< changes.
6. Briefly press the button to display the indi-
vidual service items, refer to the following
information. REFERENCE

53
Downloaded from www.Manualslib.com manuals search engine
 Possible displays
Everything under control

Website : http://www.softlay.org

1 Button for selecting information 6 Roadworthiness test

2 Engine oil 7 Brake fluid
3 Front brakes 8 Exit display 51
4 Rear brakes 9 Next setting or item of information 51
5 Vehicle check More information on the MINI Maintenance Sys-
tem can be found on page 109.

Clock 2. Press and hold the button until the display

changes.
Setting the time 3. Briefly press the button repeatedly until the
symbol and "SET" are displayed.
To set the 12h/24h mode, refer to Formats and
units of measure on page 51.
1. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is displayed.

4. Press and hold the button until the display

changes.
5. Press the button to set the hours.

54
Downloaded from www.Manualslib.com manuals search engine
 6. Wait for the display to change to minutes. Check Control
7. Press the button to set the minutes.
8. Wait for the display to change. The concept
The settings are stored. The Check Control monitors vehicle functions

AT A GLANCE
and alerts you to any malfunctions in the sys-
tems monitored. Check Control messages
Date involve indicator or warning lamps in the dis-
plays and, in some circumstances, an acoustic
Setting the date signal. To adjust the volume of the signal, refer
to the Owner's Manual for Radio.
To set the dd/mm or mm/dd date format, refer
to Formats and units of measure on page 51.

Website : http://www.softlay.org
1. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.

CONTROLS
Indicator and warning lamps can light up in var-
ious combinations and colors in the indicator
areas 1 and 2.

DRIVING TIPS
What to do in case of a malfunction
2. Press and hold the button until the display
The meaning of each lamp in the event of a mal-
changes.
function and tips on how to respond are listed
3. Briefly press the button repeatedly until the starting on page 129.
symbol and "SET" are displayed.
Hiding Check Control messages

MOBILITY

4. Press and hold the button until the display

changes. Press the button in the turn indicator lever.
5. Press the button to set the day of the month. Some Check Control messages are displayed
REFERENCE

6. Wait for the display to change to month. until the malfunctions have been rectified. They
cannot be hidden. If several malfunctions occur
7. Set the month and year in the same way.
at the same time, they are displayed in succes-
8. Wait for the display to change. sion.
The settings are stored.

55
Downloaded from www.Manualslib.com manuals search engine
 Other Check Control messages are automatically 3. Press the button repeatedly until the display
Everything under control
hidden after approx. 20 seconds, but remain shows the corresponding symbol and
stored. "CHECK INFO".

Website : http://www.softlay.org
This symbol indicates that Check Control
messages have been stored. Check Control mes-
4. Hold the button down.
"CHECK OK" appears if there are no Check
sages can be viewed whenever it is convenient. Control messages.
If a Check Control message has been stored,
Viewing stored Check Control messages the corresponding message is displayed.
Stored Check Control messages can only be dis- 5. Briefly press the button to check for other
played if the driver's door is closed. messages.
1. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.

2. Press and hold the button until the display

changes.

56
Downloaded from www.Manualslib.com manuals search engine
 Technology for driving comfort
and safety

AT A GLANCE
Park Distance Control Malfunction
PDC* Indicator lamp comes on: PDC is mal-
functioning. Have the system checked.

The concept To avoid this problem, keep the sensors

clean and free of ice or snow in order to ensure
PDC assists you with parking backwards. Acous-
that they will continue to operate effectively.

Website : http://www.softlay.org
tic signals warn you of the presence of an object
When using a high-pressure cleaner, do not direct
behind the vehicle. To measure the distance,
the jet toward the sensors for lengthy periods and
there are four ultrasonic sensors in either
only spray from a distance of at least 4 in/10 cm.
bumper.

CONTROLS
However, an acoustic warning does not System limitations
sound until an object is approx. 24 in/
Even with PDC, final responsibility for esti-
60 cm from the corner sensors, or approx. 5 ft/
mating the distance between the vehicle
1.50 m from the center sensors. PDC is a parking
and any obstructions always remains with the
aid that can indicate objects when they are
driver. Sensors, too, have blind spots in which
approached slowly, as is usually the case when
objects cannot be detected. Moreover, ultra-
parking. Avoid approaching an object at high
sonic detection can reach its physical limits with
speed, otherwise physical circumstances may
objects such as trailer tow bars and couplings,

DRIVING TIPS
lead to the system warning being issued too
thin and wedge-shaped objects, etc. Low
late.<
objects already indicated, such as curbs, may
enter the sensors' blind spots before or after a
Automatic mode continuous audible signal is given. Higher, pro-
With the engine running or the ignition switched truding objects, such as wall ledges, may not be
on, the system is activated automatically after detectable. Therefore, always drive cautiously,
approx. 1 second when you engage reverse gear otherwise there is a risk of personal injury or
or move the automatic transmission selector property damage. Loud sound sources outside
lever to position R. Wait this short period before or inside the car can drown out the PDC signal.<
driving.

MOBILITY
Acoustic signals Driving stability control
As the distance between vehicle and object
decreases, the intervals between the tones
systems
become shorter. If the distance to the nearest Your MINI has a number of systems that help to
object falls to below roughly 1 ft/30 cm, then a maintain the vehicle's stability even in adverse
continuous tone sounds. driving conditions.
If the distance remains constant, e.g. when driv- The laws of physics cannot be repealed,
ing parallel to a wall, the acoustic signal stops even with driving stability control systems.
REFERENCE

after approx. 3 seconds. An appropriate driving style always remains the

responsibility of the driver. Therefore do not
Adjustments reduce the additional safety margin by engaging
The volume of the acoustic signals can be in hazardous driving thereby running the risk of
adjusted, refer to the Owner's Manual for Radio. an accident.<

57
Downloaded from www.Manualslib.com manuals search engine
 Antilock Brake System ABS > Cornering Brake Control CBC
Technology for driving comfort and safety
ABS prevents locking of the wheels during brak- > Hill Start Assist
ing. Safe steering response is maintained even
during full braking. Active safety is thus Deactivating DSC
increased.
Braking safely, refer to page 85.
Among others, ABS includes the following func-
tions:
> Cornering Brake Control CBC
> Electronic brake-force distribution EBV

Website : http://www.softlay.org
> Brake Assist

Cornering Brake Control CBC

Press the button repeatedly until the DSC indica-
Driving stability and steering characteristics are tor lamps come on. DSC is deactivated. Stabiliz-
further enhanced while braking in turns or dur- ing and propulsion promoting actions are no
ing a lane change. longer executed.
When driving with snow chains or to 'rock free'
Electronic brake-force distribution EBV
in snow, it can be helpful to switch off DSC for a
The system controls the brake pressure in the brief period.
rear wheels to ensure stable braking behavior.
To increase vehicle stability, activate DSC again
as soon as possible.
Brake Assist
Rapidly depressing the brake causes this system Activating DSC
to automatically develop maximum braking
Press the button again: the DSC indicator lamps
force. Thus, the system helps keep braking dis-
go out.
tance to a minimum. At the same time, all the
benefits provided by ABS are exploited.
For better control
Do not reduce the pressure on the brake for the
If the indicator lamp flashes:
duration of the full braking application.
The DSC controls the driving and
breaking forces.
Dynamic Stability Control DSC
If the indicator lamps are on:
DSC prevents the driving wheels from losing
DSC is deactivated.
traction when you pull away from rest or accel-
erate. The system also recognizes unstable driv-
ing conditions, for example if the rear of the car
is about to swerve or if momentum is acting at
an angle past the front wheels. In these cases, Dynamic Traction Control DTC*
DSC helps the vehicle maintain a safe course DTC is a type of DSC that is propulsion optimized
within physical limits by reducing engine output for special road conditions such as uncleared
and through braking actions at the individual snowy roads. The system ensures maximum
wheels. propulsion though with restricted driving stabil-
DSC also encompasses the following functions: ity. You therefore need to drive with suitable
caution.
> Antilock Brake System ABS
In the following exceptional situations, it can be
> Electronic brake-force distribution EBV
useful to briefly activate DTC:
> Brake Assist

58
Downloaded from www.Manualslib.com manuals search engine
 > when driving on snow-covered inclines, in Deactivating both DTC and DSC
slush, or on uncleared snowy roads
> when rocking the vehicle free, driving out of
deep snow or on loose surfaces
> when driving with snow chains

AT A GLANCE
Activating DTC

Press the button for at least 3 seconds: the DSC

Website : http://www.softlay.org
indicator lamps come on. The dynamic traction
control (DTC) and dynamic stability control (DSC)
are both deactivated. There will be no more sta-

CONTROLS
bilizing interventions.
Interventions (differential lock) in braking occur
Press the button: the DTC indicator lamps come to improve propulsion when drive wheels are
on. rotating unevenly, even when the DSC is deacti-
vated.
For better control
Activating DSC
If the indicator lamp flashes:
DTC controls the driving and breaking Press the button again: the indicator lamps go
out.

DRIVING TIPS
forces.
If the indicator lamps are on:
Hill Start Assist*
DTC is activated.
Hill Start Assist aids you in comfortably driving
off on inclines. It is not necessary to use the
parking brake for this.

Deactivating DTC 1. Hold the MINI with the brake.

Press the button again: the DSC indicator lamps 2. Release the brake and immediately drive
go out. off.
Hill Start Assist holds the car in place for approx.

MOBILITY
2 seconds after the brake is released.
Depending on the load and gradient, the
vehicle can roll backward slightly during
this period. After you release the brake, immedi-
ately start driving since the hill start assist only
holds the vehicle for about 2 seconds, and it will
start to roll backwards.<
REFERENCE

59
Downloaded from www.Manualslib.com manuals search engine
 Sport button* Each time you correct the pressure in a
Technology for driving comfort and safety
tire, or change a wheel or tire, the system
Pressing the button causes your MINI to respond must be reinitialized.<
even more sportily.
> Engine responds more spontaneously to System limitations
movements of the accelerator. The Flat Tire Monitor is unable to warn the driver
> Steering response is more direct. of sudden, severe tire damage caused by exter-
nal factors, nor can it identify the gradual loss of
With automatic transmission:
pressure that will inevitably occur in all four tires
> More rapid gear shifting in Sport program. over a lengthy period of time.
In the following situations, the system could be
Activating the system

Website : http://www.softlay.org
delayed or malfunction:
> System has not been initialized
> Driving on snowy or slippery road surface
> Performance-oriented style of driving: slip in
the drive wheels, high lateral acceleration
> Snow chains are attached
When the vehicle is driven with a space-saver
spare tire*, page 122, the Flat Tire Monitor can-
not function.
Press the SPORT button.
The LED lights up. Initializing the system
SPORT is briefly displayed in the tachometer. The initialization is completed during driv-
ing, which can be interrupted at any time.
Deactivating the system When driving resumes, the initialization is con-
> Press the SPORT button again. tinued automatically.
Do not initialize the system if you are driving
> Switch off the engine.
with snow chains or a space-saver spare tire*.<
1. Start the engine, but do not start driving.
Flat Tire Monitor FTM 2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
The concept
The Flat Tire Monitor detects pressure loss in a
tire by comparing the rotating speeds of the
individual tires while moving.
If a tire loses pressure, its rolling circumference
changes, and this in turn alters the speed of
rotation. This change is detected and is reported
as a flat tire.

Functional requirement
In order to assure the reliable reporting of a flat 3. Press and hold the button until the display
tire, the system must be initialized for the cor- changes.
rect tire inflation pressure.

60
Downloaded from www.Manualslib.com manuals search engine
 4. Briefly press the button repeatedly until the Do not continue driving if the vehicle is
corresponding symbol and "RESET" are dis- not equipped with Run-Flat Tires,
played. page 103, otherwise a serious accident
could result.<
2. At the next opportunity, check the air pres-

AT A GLANCE
sure in all four tires.
If all four tires are inflated to the cor-
rect pressures, the Flat Tire Monitor
might not have been initialized. The system
must then be initialized.<
3. In the event of complete tire pressure loss,

Website : http://www.softlay.org
0 psi/0 kPa, you can estimate the possible
5. Press and hold the button until the display distance for continued driving on the basis
changes. of the following guidelines:

CONTROLS
6. Start driving. > With a light load:
Initialization is completed while the car is on 1 to 2 persons without luggage:
the move, without any feedback. approx. 155 miles/250 km
> With a medium load:
Indication of a flat tire 2 persons, cargo bay full, or 4 persons
The warning lamps come on in yellow without luggage:
and red. An acoustic signal also sounds. approx. 90 miles/150 km
There is a flat tire or substantial loss of > With a full load:
tire pressure. 4 persons, load compartment full:

DRIVING TIPS
1. Reduce speed and stop the vehicle with cau- approx. 30 miles/50 km
tion. Avoid sudden braking and steering Drive cautiously and do not exceed a
maneuvers. speed of 50 mph or 80 km/h, otherwise an
2. Check whether your vehicle is equipped accident may occur. In the event of pressure
with normal tires or Run-Flat Tires. loss, vehicle handling changes. This includes
reduced tracking stability in braking, extended
The symbol identifying Run-Flat Tires
braking distance and altered natural steering
is a circle with the letters RSC on the
characteristics. If unusual vibration or loud
sidewall, refer to Run-Flat Tires, page 103.<
noises occur during the journey, this may be an

MOBILITY
indication that the damaged tire has finally
Normal tires failed. Reduce the vehicle speed and stop as
1. Determine which tire is damaged. soon as possible. Otherwise, sections of the tire
If this cannot be determined, contact may come loose and cause accidents. Do not
your MINI Dealer.< continue driving and contact your MINI Dealer.<
2. Repair the flat tire, refer to page 119, or
change the damaged tire, refer to page 121. Malfunction
The warning lamps light up in yellow.
Run-Flat Tires* There is a malfunction in the Flat Tire
REFERENCE

1. Cautiously reduce speed to below 50 mph Monitor or the system has failed. Have
or 80 km/h. Avoid sudden braking and the system checked as soon as possible.
steering maneuvers. Do not exceed a speed
of 50 mph or 80 km/h.

61
Downloaded from www.Manualslib.com manuals search engine
 Tire Pressure Monitor Using the button in the turn indicator lever
Technology for driving comfort and safety
TPM* 1. Start the engine, but do not start driving.
2. Briefly press the button in the turn indicator
The concept lever repeatedly until "SET/INFO" is displayed.

TPM checks the inflation pressures of the four

mounted tires. The system notifies you if there is
a significant loss of pressure in one or more tires.

Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must be reset while all tire infla-

Website : http://www.softlay.org
tion pressures are correct.
Always use wheels with TPM electronics. Other-
wise, the system may malfunction. 3. Press and hold the button until the display
Each time a tire inflation pressure has changes.
been corrected or a wheel or tire has been 4. Repeatedly press the button briefly until the
changed, reset the system.< symbol for Tire Pressure Monitor and
"ACTIVE" are displayed.
System limitations The Tire Pressure Monitor can be reset using
TPM cannot warn you in advance of sud- "RESET".
den severe tire damage caused by outside
influences.<
The system does not work correctly if it has not
been reset; for example, a flat tire may be indi-
cated even though the tire inflation pressures
are correct.
The system is inactive and cannot indicate a flat
tire if a wheel without TPM electronics, such as a
compact spare wheel*, has been mounted, or if
TPM is temporarily malfunctioning due to other 5. Press and hold the button until "RESETTING"
systems or devices using the same radio fre- appears.
quency.

Resetting the system

Each time a tire inflation pressure has
been corrected or a wheel or tire has been
changed, reset the system.<

6. Start driving.
After driving a few minutes, the set inflation
pressures in the tires are accepted as the tar-
get values to be monitored. The system
reset is completed during your drive, and

62
Downloaded from www.Manualslib.com manuals search engine
 can be interrupted at any time. When driving > With a medium load:
resumes, the reset is continued automati- 2 persons, cargo bay full, or 4 persons
cally. The indicator lamp goes out after the without luggage:
system reset is completed. approx. 90 miles/150 km
> With a full load:

AT A GLANCE
Message for low tire inflation pressure 4 persons, load compartment full:
The warning lamps come on in yellow approx. 30 miles/50 km
and red. An acoustic signal also sounds. Drive cautiously and do not exceed a
There is a flat tire or substantial loss of speed of 50 mph/80 km/h, otherwise an
tire pressure. accident may occur. In the event of pressure
1. Reduce speed and stop the vehicle with cau- loss, vehicle handling changes. This includes

Website : http://www.softlay.org
tion. Avoid sudden braking and steering reduced tracking stability in braking, extended
maneuvers. braking distance and altered natural steering
2. Check whether your vehicle is equipped characteristics. If unusual vibration or loud

CONTROLS
with normal tires or Run-Flat Tires. noises occur during the journey, this may be an
indication that the damaged tire has finally
The symbol identifying Run-Flat Tires
failed. Reduce the vehicle speed and stop as
is a circle with the letters RSC on the
soon as possible. Otherwise, sections of the tire
sidewall, refer to the Owner's Manual for Ve-
may come loose and cause accidents. Do not
hicle.<
continue driving and contact your MINI Dealer.<

Normal tires
Malfunction
1. Determine which tire is damaged.
The small warning lamp flashes in yel-
If this cannot be determined, contact

DRIVING TIPS
low and then lights up continuously; the
your MINI Dealer.< larger warning lamp comes on in yel-
2. Repair the flat tire or change the damaged low. No punctures can be detected.
tire, refer to page 121. This type of message is shown in the following
situations:
Run-Flat Tires* > If there is a malfunction
1. Cautiously reduce speed to below 50 mph/ Have the system checked.
80 km/h. Avoid sudden braking and steering
> If a wheel without TPM electronics has been
maneuvers. Do not exceed a speed of
mounted
50 mph/80 km/h.

MOBILITY
> If TPM is temporarily malfunctioning due to
Do not continue driving if the vehicle is
other systems or devices using the same
not equipped with Run-Flat Tires, oth-
radio frequency.
erwise a serious accident could result.<
2. In the event of complete tire pressure loss,
0 psi/0 kPa, you can estimate the possible
distance for continued driving on the basis
of the following guidelines:
> With a light load:
1 to 2 persons without luggage:
REFERENCE

approx. 155 miles/250 km

63
Downloaded from www.Manualslib.com manuals search engine
 Message for unsuccessful system reset The TPMS malfunction indicator is combined
Technology for driving comfort and safety
Both warning lamps come on in yellow. with the low tire pressure telltale. When the sys-
The system is not reset after a tire has tem detects a malfunction, the telltale will flash
been changed, for example. for approximately one minute and then remain
continuously lit. This sequence will continue
Check the tire inflation pressure and
upon subsequent vehicle startups as long as the
reset the system, refer to the Owner's Manual
malfunction exists. When the malfunction indi-
for Vehicle.
cator is illuminated, the system may not be able
to detect or signal low tire pressure as intended.
Declaration according to NHTSA/ TPMS malfunctions may occur for a variety of
FMVSS 138 Tire Pressure Monitoring reasons, including the installation of replace-
Systems ment or alternate tires or wheels on the vehicle

Website : http://www.softlay.org
Each tire, including the spare, should be that prevent the TPMS from functioning prop-
checked monthly when cold and inflated to the erly. Always check the TPMS malfunction telltale
inflation pressure recommended by the vehicle after replacing one or more tires or wheels on
manufacturer on the vehicle placard or tire infla- your vehicle to ensure that the replacement or
tion pressure label. If your vehicle has tires of a alternate tires and wheels allow the TPMS to
different size than the size indicated on the vehi- continue to function properly.
cle placard or tire inflation pressure label, you
should determine the proper tire inflation pres-
sure for those tires. As an added safety feature,
your vehicle has been equipped with a tire pres-
sure monitoring system TPMS that illuminates a
low tire pressure telltale when one or more of
your tires are significantly under-inflated.
Accordingly, when the low tire pressure telltale
illuminates, you should stop and check your tires
as soon as possible, and inflate them to the
proper pressure. Driving on a significantly
under-inflated tire causes the tire to overheat
and can lead to tire failure. Underinflation also
reduces fuel efficiency and tire tread life, and
may affect the vehicle's handling and stopping
ability. Please note that the TPMS is not a substi-
tute for proper tire maintenance, and it is the
driver's responsibility to maintain correct tire
pressure, even if underinflation has not reached
the level at which the TPMS low tire pressure tell-
tale illuminates.

64
Downloaded from www.Manualslib.com manuals search engine
 Airbags

AT A GLANCE
Website : http://www.softlay.org
The following airbags are located under the 1 Front airbags
marked covers: 2 Side airbags in backrests
3 Head airbags at the front and rear

CONTROLS
Protective action
Observe the instructions on page 29 to instrument panel, seats and roof posts, as well as
ensure the best possible personal protec- the sides of the roof lining. Do not attempt to
tion.< remove or dismantle the steering wheel.
The front airbags help protect the driver and Do not touch the individual components imme-
front passenger by responding to frontal diately after the system has been triggered,
impacts in which safety belts alone cannot pro- because there is a danger of burns.
vide adequate restraint. When needed, the head In the event of malfunctions, deactivation, or

DRIVING TIPS
and side airbags help provide protection in the triggering of the airbag restraint system, have
event of side impact. The relevant side airbag the testing, repair, removal, and disposal of air-
supports the side upper body area. The head air bag generators executed only by a MINI Dealer
bag supports the head. or a workshop that works according to repair
procedures of the manufacturer of your MINI
The airbags are designed to not be triggered in
with correspondingly trained personnel and has
every type of collision, e.g. not in minor acci-
the required explosives licenses. Otherwise,
dents, certain rollover situations or rear impacts.
unprofessional attempts to service the system
Do not apply adhesive materials to the could lead to failure in an emergency or undes-
cover panels of the airbags, cover them or ired airbag activation, either of which could

MOBILITY
modify them in any other way. result in personal injury.<
Keep the dashboard and window on the passen-
Warning notices and information about the air-
ger side free from obstruction, i.e. do not cover it
bags can also be found on the sun visors.
with adhesive film or coverings, and do not affix
any holders such as for a navigation device or a
Automatic deactivation of the front
mobile phone.
passenger airbags
Do not attach seat covers, cushions or other
objects not specifically approved for seats with An analysis of the impression in the front pas-
integral side airbags to the front seats. Do not senger seat cushion determines whether and
how the seat is occupied. The front and side air-
REFERENCE

hang items of clothing such as coats or jackets

over the backrests. Do not attempt to remove bags for the front passenger are activated or
the airbag retention system from the vehicle. Do deactivated by the system accordingly.
not modify the individual components of the
system or its wiring in any way. This includes the
upholstered covers on the steering wheel,

65
Downloaded from www.Manualslib.com manuals search engine
 The indicator lamp above the interior rear- The front and side airbags for the front pas-
Technology for driving comfort and safety
view mirror shows the current status of senger are not activated.
the front passenger airbags, deactivated or acti- Most child seats are detected by the
vated, refer to Status of front passenger airbags system. This particularly applies to
below.< child seats that were required by the NHTSA
Before transporting a child on the front at the time of manufacture of the vehicle.
passenger seat, read the safety precau- After installing a child's seat, check that the
tions and handling instructions under Transport- indicator lamp for the front passenger air-
ing children safely, page 35. bags comes on. It indicates that the child's
The front and side airbags can also be deacti- seat has been detected and that the front
vated by adolescents and adults sitting in certain passenger airbags are deactivated.<
positions; the indicator lamp for the front pas-

Website : http://www.softlay.org
> The indicator lamp does not come on as long
senger airbags comes on. In such cases, the pas- as a person of sufficient size and in a correct
senger should change his or her sitting position sitting position is detected on the seat.
so that the front passenger airbags are activated The front and side airbags for the front pas-
and the indicator lamp goes out. If the desired senger are activated.
airbag status cannot be achieved by changing
> The indicator lamp does not come on if the
the sitting position, transport the relevant pas-
seat is empty.
senger on a rear seat. Do not attach covers,
The front and side airbags for the front pas-
cushions, ball mats or other items to the front
senger are not activated.
passenger seat unless they are specifically rec-
ommended by the manufacturer of your MINI.
Do not place any items under the seat which
Operational readiness of airbag system
could press against the seat from below. Other-
wise a correct analysis of the seat cushion is not
ensured.<

Status of front passenger airbags

As of radio readiness, page 38, the warning

lamp comes on briefly to indicate that the entire
airbag system and the belt tensioners are oper-
ational.

The indicator lamp for the front passenger air-

Airbag system malfunction
bags shows the functional status of the front > The warning lamp does not come on when
passenger's front and side airbags in accordance radio readiness or the ignition is switched
with whether and how the front passenger seat on.
is occupied. The indicator lamp shows whether > The warning lamp stays lit continuously.
the front passenger airbags are activated or In the event of a fault in the airbag system,
deactivated. have it checked without delay, otherwise
> The indicator lamp comes on as intended there is the risk that the system will not function
when a child in a specially designated child- as intended even if a sufficiently severe accident
restraint system is detected on the seat. occurs.<

66
Downloaded from www.Manualslib.com manuals search engine
 Lamps

Parking lamps/low beams Automatic headlamp control*

AT A GLANCE
When the switch is in position 3, the low beams
are switched on and off automatically depend-
ing on ambient light conditions, e.g. in a tunnel,
in twilight, or if there is precipitation.
The headlamps may also come on when the sun
is sitting low on a blue sky.

Website : http://www.softlay.org
When driving into tunnels with bright overhead
lights, there may be a delay before the head-
lamps come on.

CONTROLS
The low beams remain switched on indepen-
0 Lamps off and daytime running lamps dent of the ambient lighting conditions when
1 Parking lamps and daytime running lamps you switch on the fog lamps*.
2 Low-beam headlamps and welcome lamps If the daytime running lamps are activated,
3 Automatic headlamp control*, daytime run- page 68, the low beams are always switched on
ning lamps and welcome lamps with the light switch in position 3 and the igni-
tion on. The exterior lamps are automatically
When you open the driver's door with the igni-
switched off after the vehicle is parked.
tion switched off, the exterior lighting is auto-
matically switched off if the light switch is in The automatic headlamp control cannot

DRIVING TIPS
position 0, 2 or 3. serve as a substitute for your personal
judgment in determining when the lamps
Switch on the parking lamps if necessary, switch
should be switched on in response to ambient
position 1.
lighting conditions. For example, the system
cannot detect fog or hazy weather. To avoid
Parking lamps
safety risks, you should respond to these kinds
Turn the light switch to position 1. of low-visibility situations by switching the head-
The front, rear and side vehicle lighting is lamps on manually.<
switched on.
Activation of lights on one side of the vehicle for Welcome lamps

MOBILITY
parking, page 69. If you leave the light switch in the low beam or
The parking lamps will discharge the bat- automatic headlamp control position when you
tery. Therefore, do not leave them on for switch off the ignition, the parking lamps and
unduly long periods of time, otherwise the bat- interior lamps come on for a certain time as soon
tery might not have enough power to start the as the vehicle is unlocked.
engine.<
Pathway lighting
Low beams If you activate the headlamp flasher after park-
Turn the light switch to position 2. ing the car, with the lights switched off, the low
REFERENCE

The low beams come on when the ignition is on. beams come on and remain on for a certain
time.
The setting is stored for the remote control in
use, refer to Personal Profile, page 18.

67
Downloaded from www.Manualslib.com manuals search engine
 Setting the duration or deactivating the 8. Briefly press the button to select:
Lamps
function >
1. Switch on the ignition, refer to page 38. The function is deactivated.
2. Briefly press the button in the turn indicator > ...
lever repeatedly until "SET/INFO" is dis- Select the corresponding duration, e.g.
played. 40 seconds.
9. Press the button for a longer period.
The setting is stored.

Daytime running lamps*

The light switch can remain in the lamps off,

Website : http://www.softlay.org
parking lamps or automatic headlamp control*
position.
In the lamps off position, the exterior lighting is
automatically switched off after the vehicle is
parked. In the parking lamps position, the park-
3. Press and hold the button until the display
ing lamps will stay on after the ignition is
changes.
switched off.
4. Briefly press the button repeatedly until the
Switch on the parking lamps separately if
symbol and "SET" are displayed.
needed.

Activating/deactivating daytime
running lamps
The setting is stored for the remote control in
use, refer to Personal Profile, page 18.
1. Switch on the ignition, refer to page 38.
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
5. Press and hold the button until the display
changes.
6. Briefly press the button repeatedly until the
display shows the illustrated symbol.

3. Press and hold the button until the display

changes.

7. Press and hold the button until the display

changes.

68
Downloaded from www.Manualslib.com manuals search engine
 4. Briefly press the button repeatedly until the High beams/roadside
symbol and "SET" are displayed.
parking lamps

AT A GLANCE
Website : http://www.softlay.org
5. Press and hold the button until the display
1 Turn signal indicators/roadside parking
changes.
lamps*
6. Briefly press the button repeatedly until the

CONTROLS
2 Switching on high beams
display shows the illustrated symbol, arrow.
3 Switching off high beams/headlamp flasher

Roadside parking lamps, left or right*

The vehicle can be illuminated on one side for
parking. Comply with local regulations when
doing so.

Switching on

DRIVING TIPS
After parking the vehicle, press the lever up or
down, arrow 1.
7. Press and hold the button until the display The roadside parking lamps drain the bat-
changes. tery. Therefore, do not leave them on for
unduly long periods of time, otherwise the bat-
8. Briefly press the button to select:
tery might not have enough power to start the
> engine.<
Daytime running lamps activated.
> Switching off
Daytime running lamps deactivated. Press the lever up or down to the pressure point.

MOBILITY
9. Press the button for a longer period.
The setting is stored.

REFERENCE

69
Downloaded from www.Manualslib.com manuals search engine
 Fog lamps* Increasing brightness
Lamps
Press and hold the button until the desired
brightness is reached.

Reducing brightness
Press the button briefly.
The brightness decreases every time the button
is pressed briefly.

Interior lamps
1 Fog lamps*

Website : http://www.softlay.org
2 Rear fog lamp*
Press the respective switch to turn the lamps on/off.
The interior lamps, the footwell lamps* and the
cargo bay lamp are controlled automatically.
To avoid draining the battery, all lamps
Fog lamps* inside the car are switched off about
The parking lamps or low beams must be 8 minutes after the ignition is switched off, refer
switched on for the fog lamps to operate. The to Start/stop button on page 38.<
green indicator lamp comes on when the fog
lamps are switched on. Switching interior lamps on/off manually
Depending on your vehicle's equipment, the fog
lamps are switched off when you activate the
headlamp flasher or switch on the high beams.
If the automatic headlamp control is acti-
vated, the low beams will come on auto-
matically when you switch on the fog lamps.<

Rear fog lamp*

The low beams or parking lamps with fog lamps
must be switched on. The yellow indicator lamp To switch the interior lamps on/off.
comes on when the rear fog lamp is switched on.
Press the switch.
To switch off the interior lamps permanently,
Instrument lighting press the button for about 3 seconds.

You can adjust the brightness of the instrument Reading lamps*

lighting only when the parking lamps or the low
beams are on.

To switch the reading lamps on and off.

Press the switch.

70
Downloaded from www.Manualslib.com manuals search engine
 Ambient lighting*

AT A GLANCE
The color of the ambient lighting can be

Website : http://www.softlay.org
changed.
> Press the switch forward.
The color changes in stages, ultimately to

CONTROLS
orange.
> Press the switch toward the rear.
The color changes in stages, ultimately to
blue.
Intermediate settings and colors are possible.

DRIVING TIPS
MOBILITY
REFERENCE

71
Downloaded from www.Manualslib.com manuals search engine
 Climate
Climate

Website : http://www.softlay.org

Equipment versions
Depending on your vehicle's equipment, your
MINI contains an air conditioner or an automatic
climate control*.
1 Air conditioner
2 Automatic climate control*

Air vents
3 Airflow directed toward the windshield and
side windows
4 Air to the upper body area
5 Air to the footwell

72
Downloaded from www.Manualslib.com manuals search engine
 Air conditioner

AT A GLANCE
Website : http://www.softlay.org
1 Air flow rate 5 Rear window defroster
2 Cooling function 6 Air distribution
3 Recirculated-air mode 7 Windshield heating

CONTROLS
4 Temperature

Air flow rate rior of the car temporarily. The system then
Adjust the air flow rate. The higher the recirculates the air currently within the vehicle.
rate, the more effective the heating or If condensation starts to form on the
cooling will be. inside window surfaces, switch off the
The air flow rate is lowered or switched off recirculated-air mode and, if necessary, switch
entirely to save on battery power. on the cooling function or increase the air flow

DRIVING TIPS
rate.<
Switching the system on/off To prevent the air quality inside the vehi-
Turn the air flow rate rotary switch to 0. Blower cle from deteriorating during extended
and air conditioner are completely switched off use of the recirculated-air mode, fresh air is
and the air supply is cut off. added briefly at regular intervals.<

Set any desired air flow rate to switch on the air

Temperature
conditioner.
Turn upward, red, to increase the temper-
Cooling function ature.
When the cooling function is on, Turn downward, blue, to decrease the

MOBILITY
the air is cooled, dried, then temperature.
reheated according to the temper-
ature setting. The recirculated-air mode may be Rear window defroster
switched on automatically. This function is only
The defroster is switched off auto-
available while the engine is running.
matically after a certain time.
The cooling function helps prevent condensa-
tion on the windows or removes it quickly. Air distribution
Depending on the weather, the windshield may Direct the flow of air to the win-
fog over briefly when the engine is started.
REFERENCE

dows , to the upper body area

or to the footwell . Interme-
Recirculated-air mode diate settings are possible.
If the air outside the car has an
unpleasant odor or contains pollut-
ants, shut off the supply to the inte-

73
Downloaded from www.Manualslib.com manuals search engine
 Windshield heating* 3. Set to the highest temperature, red.
Climate
The windshield heating is switched 4. Deactivate recirculated-air mode.
off automatically after a short time. 5. Turn on windshield heating if necessary.
6. Turn on rear window defroster if necessary.
Defrosting windows and removing
condensation
Microfilter
1. Set air flow rate to the maximum level.
The microfilter captures dust and pollen. The
2. Set air distribution to position . microfilter is changed by your MINI Dealer dur-
Condensation is removed from the windows ing routine maintenance work.
more quickly when the cooling function* is
also activated.

Website : http://www.softlay.org
Automatic climate control*

1 Air flow rate, manual 6 Temperature

2 AUTO program 7 Defrosting windows and removing conden-
3 Automatic recirculated-air control AUC/ sation
Recirculated-air mode 8 Cooling function
4 Maximum cooling 9 Rear window defroster
5 Air distribution, manual 10 Windshield heating*

Comfortable interior climate Air flow rate, manual

AUTO program 2 offers the ideal air distribution Press the – button to reduce air flow. Press
and air flow rate for almost all conditions, refer the + button to increase it.
to AUTO program below. All you need to do is You can reactivate the automatic mode
select an interior temperature which is comfort- for the air flow rate with the AUTO button.
able for you.
The air flow rate is lowered or switched off
The following sections inform you in detail about entirely to save on battery power. The display
how to adjust the settings. remains the same.
Most settings are stored for the remote control
currently in use, refer also to Personal Profile set-
tings on page 18.

74
Downloaded from www.Manualslib.com manuals search engine
 Switching the system on/off air quality inside the car will deteriorate contin-
Reduce the air flow by pressing the – button uously.<
repeatedly until the system is switched off. All
indicators go out. Maximum cooling
Press the AUTO button to switch the automatic At outside temperatures above

AT A GLANCE
climate control back on. 32 7/0 6 and when the engine is
running, you obtain a maximum
AUTO program cooling effect as soon as possible.

The AUTO program adjusts the air The automatic climate control goes into recircu-
distribution to the windshield and lated-air mode at the lowest temperature. Air
side windows, towards the upper body area and flows at maximum rate from the vents for the

Website : http://www.softlay.org
into the footwell for you. The air flow rate and upper body area. You should therefore open
your temperature specifications will be adapted them for maximum cooling.
to outside influences in accordance with sea-

CONTROLS
sonal changes, e.g. sunlight. Air distribution, manual
The cooling function is automatically switched The flow of air is directed to the
on along with the AUTO program. windows, to the upper body area or
to the footwell as selected.
Automatic recirculated-air control AUC/ You can switch the automatic air
Recirculated-air mode distribution back on by pressing the AUTO but-
Switch on the desired operating ton.
mode by pressing the button
repeatedly. Temperature

DRIVING TIPS
Set the desired temperature individually.
Display of operating modes The automatic climate control achieves
No display: outside air flows in continuously. this temperature as quickly as possible
AUC mode: a sensor detects pollutants in regardless of the season, using maximum
the outside air. If necessary, the system cooling or heating power if necessary, and then
blocks the supply of outside air and recir- maintains it.
culates the inside air. As soon as the concentra- If you switch between different tempera-
tion of pollutants in the outside air has ture settings in quick succession, the auto-
decreased sufficiently, the system automatically matic climate control does not have enough

MOBILITY
switches back to outside air supply. time to achieve the set temperature.<
At outside temperatures below approx. 417/
+5 6, the AUC mode may be restricted due to Rear window defroster
the increased risk of window condensation. The defroster is switched off auto-
Recirculated-air mode: the supply of out- matically after a certain time.
side air is permanently shut off. The sys- Depending on your vehicle's equip-
tem then recirculates the air currently ment, the upper wires serve as an
within the vehicle. antenna and are not part of the rear window
defroster.
If condensation starts to form on the
REFERENCE

inside window surfaces, press the AUTO

button or switch off the recirculated-air mode
and, if necessary, increase the air flow rate.
The recirculated-air mode should not be used
over an extended period of time, otherwise the

75
Downloaded from www.Manualslib.com manuals search engine
 Defrosting windows and removing Ventilation
Climate
condensation
Quickly removes ice and condensa-
tion from the windshield and front
side windows.
For this purpose, also switch on the
cooling function.
The windshield heating* is switched on auto-
matically.

Windshield heating*

Website : http://www.softlay.org
The windshield heating is switched 1 Knob for continuous opening and closing
off automatically after a certain
2 Jet for direction of air flow
time.

Opening/closing
Turn the knob.
Cooling function
Direction of air flow
When the cooling function is on,
the air is cooled, dried, then Swivel the entire jet.
reheated according to the temper-
ature setting. This function is only
available while the engine is running.
The cooling function helps prevent condensa-
tion on the windows or removes it quickly.
Depending on the weather, the windshield may
fog over briefly when the engine is started. The
recirculated-air mode may be switched on auto-
matically.
The cooling function is automatically switched
on along with the AUTO program. The passenger
compartment can only be cooled while the
engine is running.

Microfilter/activated-charcoal filter
The microfilter captures dust and pollen. The
activated-charcoal filter provides additional pro-
tection by filtering gaseous pollutants from the
outside air. Your MINI Dealer replaces this com-
bined filter as a standard part of your scheduled
maintenance.
You can call up further information in the service
requirements display, page 53.

76
Downloaded from www.Manualslib.com manuals search engine
 Practical interior accessories

Integrated universal HomeLink is a registered trademark of Johnson

AT A GLANCE
Controls, Inc.
remote control*
Programming
The concept
The integrated universal remote control can
replace as many as three hand-held transmitters
for various remote-controlled devices, such as

Website : http://www.softlay.org
garage and gate openers and lighting systems.
The integrated universal remote control regis-
ters and stores signals from the original hand-

CONTROLS
held transmitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
1 Memory buttons
ory buttons 1. The system in question can then
be operated by means of the programmed 2 LED
memory button 1. The LED 2 flashes to confirm
transmission of the signal. Fixed-code hand-held transmitters
If you decide to sell your vehicle one day, in the 1. Switch on the ignition, page 38.
interest of your own security, remember to clear 2. When starting operation for the first time:

DRIVING TIPS
the stored programs before the vehicle leaves press both outer memory buttons 1 for
your possession, page 78. approx. 20 seconds until the LED 2 flashes
To prevent possible damage or injury, rapidly. All stored programs are cleared.
before programming or using the inte- 3. Hold the original hand-held transmitter at a
grated universal remote control, always inspect distance of approx. 2 to 12 in/5 to 30 cm
the immediate area to make certain that no from the memory buttons 1.
people, animals or objects are within the pivot- The required distance between the
ing or travel range of the device being operated. hand-held transmitter and the mem-
Comply also with the safety instructions supplied ory buttons 1 depends on the system of the
with the original hand-held transmitter.<

MOBILITY
respective original hand-held transmitter
used.<
Checking compatibility
4. Simultaneously press the transmit key on
If this symbol appears on the package the original hand-held transmitter and the
or in the instructions supplied with the desired memory button 1 on the integrated
original hand-held transmitter, you can universal remote control. The LED 2 flashes
assume that the radio remote control device will slowly at first. As soon as the LED 2 flashes
be compatible with the integrated universal rapidly, release both buttons. If the LED 2
remote control. does not flash rapidly after approx. 15 sec-
REFERENCE

For additional information, please contact your onds, alter the distance.
MINI Dealer or call: 1-800-355-3515. 5. To program other original hand-held trans-
You can also obtain information on the Internet at: mitters, repeat steps 3 and 4.
www.MINI.com or
www.homelink.com

77
Downloaded from www.Manualslib.com manuals search engine
 The corresponding memory button 1 is now The corresponding memory button 1 is now
Practical interior accessories
programmed with the signal of the original programmed with the signal of the original
hand-held transmitter. hand-held transmitter.
You can operate the system with the engine
running or with the ignition switched on. Clearing stored programs
If the system fails to function even after Press both outer memory buttons 1 for approx.
repeated programming, check whether 20 seconds until the LED 2 flashes: All stored
the original hand-held transmitter uses an alter- programs are cleared.
nating-code system. To do so, either read the It is not possible to clear individual programs.
instructions for the original hand-held transmit-
ter or hold down the programmed memory Reassigning individual programs

Website : http://www.softlay.org
button 1 of the integrated universal remote con- 1. Hold the original hand-held transmitter at a
trol. If the LED 2 on the integrated universal distance of approx. 2 to 12 in/5 to 30 cm
remote control flashes rapidly and then remains from the memory buttons 1.
lit for about two seconds, the original hand-held
The required distance between the
transmitter uses an alternating-code system. If it
hand-held transmitter and the mem-
uses an alternating-code system, program the
ory buttons 1 depends on the system of the
memory buttons 1 as described under Alternat-
respective original hand-held transmitter
ing-code hand-held transmitters.<
used.<
Alternating-code hand-held 2. Press the desired memory button 1 of the
transmitters integrated universal remote control.
To program the integrated universal remote 3. If the LED 2 flashes slowly after approx.
control, consult the operating instructions for 20 seconds, press the transmit key of the
the device to be set. You will find information original hand-held transmitter and release
there on the possibilities for synchronization or both buttons as soon as the LED 2 flashes
programming of additional hand-held transmit- rapidly.
ters. If the LED 2 does not flash rapidly after
When programming hand-held transmitters that approx. 15 seconds, alter the distance and
employ an alternating code, please observe the repeat this step.
following supplementary instructions:
Programming will be easier with the aid of
a second person.< Glove compartment
1. Park your vehicle within the range of the
remote-controlled device. Opening
2. Program the integrated universal remote
control as described above in the section
Fixed-code hand-held transmitters.
3. Locate the button on the receiver of the
device to be set, e.g. on the drive unit.
4. Press the button on the receiver of the
device to be set. After step 4, you have
approx. 30 seconds for the next step 5.
5. Press the programmed memory button 1 of
Press the button to open the cover.
the integrated universal remote control
The light in the glove compartment comes on.
three times.

78
Downloaded from www.Manualslib.com manuals search engine
 Closing Opening
Fold cover up. The cover slides along guide rails and can be
To prevent injury in the event of an acci- opened fully by pushing it back and lifting it.
dent, close the glove compartment after
use while the vehicle is being driven.< Closing

AT A GLANCE
Push the cover forwards.
Ventilation*
Depending on your vehicle's equipment, it may
be possible to ventilate the glove compartment. Connection for external
audio device

Website : http://www.softlay.org
> iPods/iPhones or USB devices such as MP3
players and USB memory sticks: Connect via
the USB audio interface

CONTROLS
> iPhone/mobile phone music players: Con-
nect via the snap-in adapter* (see separate
owner's manual). Playback is only possible if
there is no device connected to the USB
audio interface.
Opening
Turn the switch to the horizontal position, arrow. Connecting via the USB audio interface

Closing

DRIVING TIPS
Turn the switch to the vertical position.
Depending on the temperature setting of the air
conditioning or the automatic climate control,
high temperatures may result in the glove com-
partment.

Center armrest* 1 Connection for audio playback:

TRS connector 1/8 in/3.5 mm

MOBILITY
Storage compartment 2 USB interface*
The center armrest between the front seats con-
tains either a compartment or the cover for the iPod/iPhone
mobile phone base plate* or the snap-in adapter*. To connect the iPod/iPhone, use the cable
adapter for the Apple iPod.
For additional information, contact your MINI
Dealer or visit the Internet at www.MINI.com
To play audio tracks over the vehicle's loud-
speaker system, connect the iPod to ports 1
REFERENCE

and 2.
The iPod/iPhone's menu structure is supported
by the USB audio interface.

79
Downloaded from www.Manualslib.com manuals search engine
 USB device Opening
Practical interior accessories
To play audio tracks over the vehicle's loudspeaker Briefly press the bottom edge of the cover.
system, connect the USB device to port 2.
Closing
Notes Push the cover back into its original position.
Do not expose the audio device to To prevent injury in the event of an acci-
extreme environmental conditions, e.g. dent, close the storage compartment after
very high temperatures, refer to the operating use while the vehicle is being driven.<
instructions of the audio device. Otherwise the
audio device may become damaged, which Clothes hooks
could compromise safety while driving.<
There are clothes hooks on the grab handles in

Website : http://www.softlay.org
> The USB-audio interface supplies the con- the rear passenger compartment.
nected audio devices with power, provided
Items of clothing hung from the hooks
that this is supported by the audio device.
must not obstruct the driver's view. Do not
Therefore, do not connect the USB audio
hang heavy objects from the hooks, otherwise
device to the power socket in the vehicle
they could endanger the car's occupants, e.g. in
during operation.
case of heavy braking or sudden swerving.<
> Do not forcibly connect the plug to the USB
interface. In the cargo bay
> Do not connect devices such as fans or Depending on your vehicle's equipment, you
lamps to the USB-audio interface. have the following storage options:
> Do not connect USB hard disks. > Umbrella holder* under the loading sill in
> Do not use the USB-audio interface to front of the warning triangle.
charge external devices. > Hooks, e.g. for shopping bags or carrying
bags, on the left and right sides of the cargo
bay.
Storage compartments > Storage compartment under the level load
floor*
In the vehicle interior
> Removable box with lid* under the level
Depending on your vehicle's equipment, you load floor, e.g. for wet or dirty items
will find storage compartments in the doors,
> Storage compartment in the splitdoor
next to the rear seats and in the center console*.
Nets* are located in the passenger footwell and
on the backs of the front seat backrests.

Storage compartment on the front

passenger side*

80
Downloaded from www.Manualslib.com manuals search engine
 Cup holders and ashtray* Lighter
With the engine running or the ignition switched
on, press in the cigarette lighter.
The lighter can be pulled out as soon as it pops
back out.

AT A GLANCE
Hold or touch the hot cigarette lighter by
the knob only. Holding or touching it in
other areas could result in burns.
When leaving the car, always remove the key so
that children cannot operate the cigarette
lighter and burn themselves.<

Website : http://www.softlay.org
Cup holders
Two cup holders are located in the front of the
Connecting electrical
center console, another is in the rear at the back

CONTROLS
of the center console. appliances
There are two additional cup holders in the arm
In your MINI, you can use electrical devices such
rests in the rear.
as a flashlight, car vacuum cleaner, etc., up to
approx. 200 watts at 12 volts, as long as one of
the following sockets is available. Avoid damag-
ing the sockets by attempting to insert plugs of
unsuitable shape or size.

DRIVING TIPS
Cigarette lighter socket
Remove the lighter* or cover from the socket.

Power socket in cargo bay

Do not place glass containers in the cup
holders, as this increases the risk of injury
in the event of an accident.<

Ashtray*

MOBILITY
The ashtray is located in one of the cup holders
in the center console.

Emptying
Remove the entire ashtray. By way of example, the illustration shows the
cargo bay in the MINI.
Pull out the cover.
REFERENCE

81
Downloaded from www.Manualslib.com manuals search engine
 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 AT A GLANCE

Website : http://www.softlay.org
CONTROLS

DRIVING TIPS

DRIVING TIPS

MOBILITY

REFERENCE

Downloaded from www.Manualslib.com manuals search engine

 Things to remember when driving
Things to remember when driving

Break-in period Following part replacement

The same break-in procedures should be
Moving parts need breaking-in time to adjust to observed if any of the components mentioned
each other. Please follow the instructions below above have to be renewed in the course of the
in order to achieve the optimal service life and vehicle's operating life.
economy of operation for your vehicle.

Engine and differential General driving notes

Website : http://www.softlay.org
Always obey all official speed limits.
Close splitdoor
Up to 1,200 miles/2,000 km
Drive the vehicle only when the splitdoor
Drive at varying engine and road speeds, but do is closed. Otherwise, exhaust fumes could
not exceed the following: penetrate the interior of the vehicle.<
> Gasoline engine If special circumstances make it absolutely nec-
4,500 rpm or 100 mph/160 km/h essary to drive with the splitdoor open:
Avoid full-throttle operation and use of the 1. Close all windows and the glass sunroof.
transmission's kick-down mode.
2. Switch off the recirculated-air mode and sig-
nificantly increase the air flow rate of the air
After driving 1,200 miles/2,000 km
conditioner or automatic climate control,
Engine and vehicle speeds can be gradually page 73 or 74.
increased.
Hot exhaust system
Tires
In all vehicles, extremely high tempera-
Due to technical factors associated with their tures are generated in the exhaust system.
manufacture, tires do not achieve their full trac- Do not remove the heat shields installed adjacent
tion potential until after an initial break-in to various sections of the exhaust system, and
period. Therefore, drive cautiously during the never apply undercoating to them. When driving,
first 200 miles/300 km. standing at idle and while parking, take care to
avoid possible contact between the hot exhaust
Brake system system and any highly flammable materials such
Brakes require an initial break-in period of as hay, leaves, grass, etc. Such contact could lead
approx. 300 miles/500 km to achieve optimized to a fire, with the risk of serious personal injuries
contact and wear patterns between brake pads and property damage. Do not touch hot exhaust
and rotors. Drive cautiously during this break-in tail pipes. Otherwise there is a risk of burns.<
period.
Hydroplaning
Clutch When driving on wet or slushy roads,
The function of the clutch reaches its optimal reduce road speed. If you do not, a wedge
level only after a distance driven of approx. of water can form between tires and road sur-
300 miles/500 km. During this break-in period, face. This situation, known as hydroplaning, can
engage the clutch gently. cause partial or complete loss of tire contact
with the road surface, so that the car cannot be
steered or braked properly.<

84
Downloaded from www.Manualslib.com manuals search engine
 The risk of hydroplaning increases with declining You can increase the engine's braking effect by
tread depth on the tires, refer also to Tread shifting down, all the way to first gear if necessary.
depth on page 102. This strategy helps you avoid placing excessive
loads on the brake system. Downshifting in man-
Driving through water ual mode of the automatic transmission, page 41.

AT A GLANCE
Drive through water on the road only if it is Never drive with the clutch held down,
not deeper than 1 ft/30 cm, and then only with the transmission in neutral or with
at walking speed at the most. Otherwise, the the engine switched off; otherwise, engine brak-
vehicle's engine, the electrical systems and the ing action will not be present or there will be no
transmission may be damaged.< power assistance to the brakes or steering.
Never allow floor mats, carpets or any other
Parking brake on inclines objects to protrude into the area around the

Website : http://www.softlay.org
On inclines, do not hold the vehicle with
the clutch; use the parking brake. Other-
pedals, otherwise pedal function could be
impaired.<

CONTROLS
wise greater clutch wear will result.<
Corrosion on brake rotors
For information on driving off using Hill Start
Assist*, refer to page 59. When the vehicle is driven only occasionally, dur-
ing extended periods when the vehicle is not
Braking safely used at all, and in operating conditions where
brake applications are less frequent, there is an
Your MINI is equipped with ABS. If you are in a
increased tendency for corrosion to form on
situation which requires full braking, it is best to
rotors, while contaminants accumulate on the
brake using maximum brake pressure. Since the
brake pads. This occurs because the minimum
vehicle maintains steering responsiveness, you
pressure which must be exerted by the pads dur-

DRIVING TIPS
can still avoid possible obstacles with a mini-
ing brake applications to clean the rotors is not
mum of steering effort.
reached.
The pulsation of the brake pedal, together with
Should corrosion form on the brake rotors, the
the sound of hydraulic regulation, indicates that
brakes will tend to respond with a pulsating effect
ABS is actively taking effect.
that even extended application will fail to cure.

Driving in wet conditions

When the vehicle is parked
When roads are wet or there is heavy rain, briefly
Condensation forms while the automatic climate
exert gentle pressure on the brake pedal every
control is in operation, and then exits under the
few miles. Monitor traffic conditions to ensure

MOBILITY
vehicle. Traces of condensed water under the
that this maneuver does not endanger other
vehicle are therefore normal.
road users. The heat generated in this process
helps dry the pads and rotors to ensure that In the MINI Cooper S, the coolant pump may
Then full braking force will be immediately avail- continue to run for some time after the engine is
able when it is needed. switched off. This will generate noise in the
engine compartment.
Hills
Before driving into a car wash
To prevent overheating and the resulting
reduced efficiency of the brake system, Avoid car washes with tracks higher than
REFERENCE

drive long or steep downhill gradients in the 4 in/10 cm, otherwise the chassis could be
gear in which the least braking is required. Even damaged.<
light but consistent brake pressure can lead to For general information about vehicle care for
high temperatures, brake wear and possibly your MINI, refer to the chapter beginning on
even brake failure.< page 111.

85
Downloaded from www.Manualslib.com manuals search engine
 With convenient access and automatic 1. Pull on the handle, arrow 1, to detach the
Things to remember when driving
transmission cargo bay cover.
Insert the key into the ignition lock.
The engine can be switched off when the selec-
tor lever is in position N. Refer also to page 26.

Cargo loading
To avoid loading the tires beyond their
approved carrying capacity, never over-
load the vehicle. Overloading can lead to over-

Website : http://www.softlay.org
heating and increases the rate at which damage 2. Lift the cargo bay cover up out of the hold-
develops inside the tires. The ultimate result can ers, arrows 2.
assume the form of a sudden blow-out.<
Avoid fluid spills in the cargo bay as they Expanding the cargo bay
could damage the vehicle.< The rear set backrest is split. Both sides can be
folded separately to expand the cargo bay.
Cargo bay cover If necessary, remove the third head restraint
Do not place any objects on the cover, (see Head restraints, Removing on page 31).
otherwise they could endanger the car's
occupants, e.g. in the case of braking or sudden
swerving.<
The luggage compartment cover can be locked
in intermediate positions 1 to 3.

By way of example, the illustration shows the

cargo compartment in the MINI.
1. Pull the lever.
2. Fold rear seat backrests forward.
When folding the backrest back up, make
To load bulky luggage, the cover can be
sure that the seat's locking mechanisms
removed.
engage properly. Otherwise, cargo could be
thrown around in the event of sharp braking or
swerving and endanger the occupants.<

Adjusting rear seat backrest*

Expand the cargo bay by raising the split rear
seat backrests to a steeper angle.

86
Downloaded from www.Manualslib.com manuals search engine
 Behind the front seats

AT A GLANCE
By way of example, the illustration shows the
cargo compartment in the MINI. 1. Fold down the rear seat backrests, refer to

Website : http://www.softlay.org
1. Pull the lever, arrow 1, and fold the rear seat Expanding the cargo bay.
backrest forward. 2. Insert each partition net mounting pin all the
2. Fold up the lever of the backrest lock until it way into its respective front mount in the

CONTROLS
audibly engages, arrow 2. headliner, arrow 1, and push it forward.
3. Fold back the backrest until it engages. 3. Fold up the eyelets on the rear seat and
hook the partition net into them, arrow 2.
If the rear seat backrests are positioned at
a steeper angle, do not install child-
restraint systems in the rear of the vehicle as
Level load floor*
their protective features may be ineffective.< The maximum load capacity of the level
load floor is 165 lb/75 kg. For the storage
Partition net* compartment under the load floor, do not

DRIVING TIPS
exceed a maximum load of 55 lb/25 kg, other-
Ensure that the partition net is firmly
wise damage may occur.<
attached, otherwise injuries may occur.<
The partition net can be mounted in the cargo
bay or behind the front seats.

In the cargo bay

1. Fold the rear seat backrest forward if neces-
sary, page 86.

MOBILITY
Raise the level load floor and fold it up toward
the front, arrow.

Removing
1. Fold up the level load floor.
2. Pull the load floor back slightly.
2. Insert each partition net mounting pin all the 3. Then take it out toward the top.
REFERENCE

way into its respective rear mount in the

headliner, arrow 1, and push it forward.
3. Hang the hooks of the partition net into the
eyelets on the cargo bay floor, arrow 2.

87
Downloaded from www.Manualslib.com manuals search engine
 Determining cargo limit Load
Things to remember when driving

1. Locate the following statement on your The permissible load is the sum of the occu-

Website : http://www.softlay.org
vehicle's placard*: pants' weights and the weight of the cargo. The
The combined weight of occupants greater the weight of the occupants, the less
and cargo should never exceed cargo/luggage can be transported.
XXX kg or YYY lbs. Otherwise, overloading
can result in damage to the vehicle and un- Stowing cargo
stable driving conditions.< > Position heavy objects as low and as far for-
2. Determine the combined weight of the ward as possible, ideally directly behind the
driver and passengers that will be riding in rear seat backrests.
your vehicle. > Cover sharp edges and corners.
3. Subtract the combined weight of the driver > For very heavy cargo when the rear seat is
and passengers from XXX kilograms or YYY not occupied, secure each safety belt in the
pounds. respective opposite buckle.
4. The resulting figure equals the available > Do not stack higher than the top edge of the
amount of cargo and luggage load capacity. backrests.
For example, if the XXX amount equals > Use the partition net, refer to page 87.
1,400 lbs. and there will be four 150-lb. pas- Ensure that no objects can penetrate
sengers in your vehicle, the amount of avail- through the net.
able cargo and luggage load capacity is
650 lbs:
1,400 lbs. minus 750 lbs. = 650 lbs.
5. Determine the combined weight of luggage
and cargo being loaded on the vehicle. That
weight may not safely exceed the available
cargo and luggage load capacity calculated
in step 4.
6. If your vehicle will be towing a trailer, part of
the load from your trailer will be transferred
to your vehicle. Consult the manual for
transporting a trailer to determine how this
may reduce the available cargo and luggage
load capacity of your vehicle.

88
Downloaded from www.Manualslib.com manuals search engine
 Securing cargo Mounting points

AT A GLANCE
By way of example, the illustration shows the By way of example, the illustration shows the

Website : http://www.softlay.org
cargo compartment in the MINI. roof of the MINI.
> Secure smaller and lighter items using Remove the cover panel.
retaining or draw straps*.

CONTROLS
> Heavy-duty cargo straps* for securing larger Loading roof-mounted luggage rack
and heavier objects are available at your Because roof racks raise the vehicle's center of
MINI Dealer. Four lashing eyes are provided gravity when loaded, they have a major effect
for attaching the cargo straps. Two of them on vehicle handling and steering response.
are located on the forward wall of the cargo You should therefore always remember not to
bay. exceed the approved roof load capacity, the
Comply with the information enclosed with approved gross vehicle weight or the axle loads
the load-securing devices. when loading the rack.

DRIVING TIPS
Always position and secure the cargo as You can find the applicable data under Weights
described above, so that it cannot endan- on page 144.
ger the car's occupants, for example if sudden The roof load must be distributed uniformly and
braking or swerves are necessary. should not be too large in area. Heavy items
Do not exceed the approved gross weight and should always be placed at the bottom.
axle loads (see page 144); otherwise the vehi-
When loading, make sure that there is sufficient
cle's operating safety is no longer assured and it
space for the movement of the glass sunroof.
will not be in compliance with the certification
regulations. Fasten roof-mounted cargo correctly and
Heavy or hard objects should not be carried securely to prevent it from shifting or falling off
loose inside the car, since they could be thrown during the trip.

MOBILITY
around, for example as a result of heavy braking, Drive smoothly. Avoid sudden acceleration and
sudden swerves, etc., and endanger the occu- braking maneuvers, and take corners gently.
pants. Do not secure cargo using the fastening
points for the tether strap (page 36); they may
become damaged.< Saving fuel
Fuel consumption depends on a number of dif-
Roof-mounted luggage ferent factors. The implementation of certain
measures, your driving style and regular mainte-
rack*
REFERENCE

nance can have an influence on fuel consump-

A special rack system is available as an option for tion and on the environmental impact.
your MINI. Your MINI Dealer will be glad to
advise you. Comply with the installation instruc-
tions supplied with the rack system.

89
Downloaded from www.Manualslib.com manuals search engine
 Remove unnecessary cargo Coasting
Things to remember when driving
Additional weight increases fuel consumption. When approaching a red traffic light, take your
foot off the accelerator and let the vehicle coast
Remove attached parts no longer in use to a halt in the highest suitable gear.
Remove auxiliary mirrors, roof- or rear-mounted On a downhill gradient, take your foot off the
luggage racks whenever you are not using accelerator and let the vehicle coast in a suitable
them. gear.
Attached parts on the vehicle affect its aerody- Fuel supply is shut off automatically when the
namics and increase fuel consumption. vehicle is coasting.

Check tire inflation pressure regularly Switch off the engine during lengthy

Website : http://www.softlay.org
Check and, if necessary, correct tire inflation stops
pressure at least twice a month and before start- Switch off the engine when stopping for lengthy
ing on a long trip. periods, e.g. at traffic lights, railroad crossings or
Low inflation pressure increases rolling resis- in traffic congestions.
tance and thus leads to greater fuel consump-
tion and tire wear. Have the vehicle serviced
Have your vehicle serviced regularly to achieve
Drive off immediately good economy and a long vehicle life. The man-
Do not wait for the engine to warm up while the ufacturer of your MINI recommends having the
vehicle remains stationary. Start driving right vehicle serviced by a MINI Dealer. Also note the
away, but at moderate engine speeds. This is the MINI Maintenance System, page 109.
fastest way for the cold engine to reach its oper-
ating temperature.

Think ahead while driving

Avoid unnecessary acceleration and braking by
maintaining a suitable distance to the vehicle
driving ahead.
Driving smoothly and anticipating impending
traffic situations reduces fuel consumption.

Avoid high engine speeds

Use first gear only for driving off. In second and
higher gears, accelerate smoothly to a suitable
engine and road speed. In doing so, avoid high
engine speeds and shift up early.
When you reach your desired traveling speed,
shift to the highest suitable gear and drive at
constant speed.
As a rule: driving at low engine speeds lowers
fuel consumption and reduces wear.

90
Downloaded from www.Manualslib.com manuals search engine
 AT A GLANCE
Website : http://www.softlay.org

CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE

91
Downloaded from www.Manualslib.com manuals search engine
 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 AT A GLANCE

Website : http://www.softlay.org
CONTROLS

DRIVING TIPS

MOBILITY

MOBILITY

REFERENCE

Downloaded from www.Manualslib.com manuals search engine

 Refueling
Refueling

Switch off the engine before refueling, Manually releasing the fuel filler door
otherwise fuel cannot be added to the
tank and a message will be displayed.<
Take all precautionary measures and
observe all applicable regulations when
handling fuel. Do not carry any spare fuel con-
tainers in your vehicle. They can develop a leak
and cause an explosion or cause a fire in the

Website : http://www.softlay.org
event of an accident.<

Pull on the green knob with the fuel pump sym-

Fuel filler door bol; the fuel filler door opens.

Opening Observe the following when refueling

Take all precautionary measures and
observe all applicable regulations when
handling fuel, otherwise there is a danger of per-
sonal injury and property damage.<
When refueling, insert the filler nozzle completely
into the filler pipe. Avoid lifting the filler nozzle
while filling the tank, as that would lead to
> premature pump shutoff
> reduced efficiency of the fuel-vapor recov-
1. Open fuel filler door.
ery system.
2. Turn the gas cap counterclockwise.
The fuel tank is full when the filler nozzle clicks
3. Place the gas cap in the bracket attached to off the first time.
the fuel filler door.
Fuel tank capacity
Closing
If the range displayed is less than
Fit the cap and turn it clockwise until you clearly 30 miles/50 km, be sure to refuel; other-
hear a click. wise engine functions are not guaranteed and
Do not pinch the band attached to the damage could occur.<
cap, otherwise the cap cannot be closed
properly and fuel vapors can escape. A message MINI Cooper, MINI Cooper S
will be displayed if the gas cap is loose or miss- Approx. 13.2 US gallons/50 liters, including the
ing.< reserve capacity of 2.1 US gallons/8 liters.

94
Downloaded from www.Manualslib.com manuals search engine
 Fuel specifications
Do not fill the tank with leaded fuel, as this
would cause damage to the catalytic con-
verter.

AT A GLANCE
Do not fill the tank with E85, i.e. fuel containing
85% ethanol, nor with FlexFuel. Otherwise the
engine and fuel supply system will be damaged.<

Required fuel

Super Premium gasoline/AKI 91

Website : http://www.softlay.org
This gasoline is highly recommended.
However, you may also use gasoline with less

CONTROLS
AKI. The minimum AKI Rating is 87.
If you use gasoline with this minimum AKI Rat-
ing, the engine may produce knocking sounds
when starting at high outside temperatures. This
has no effect on the engine life.
Do not use any gasoline below the speci-
fied minimum fuel grade. Otherwise the
engine could be damaged.<

DRIVING TIPS
Use high-quality brands
Field experience has indicated significant differ-
ences in fuel quality: volatility, composition,
additives, etc., among gasolines offered for sale
in the United States and Canada. Fuels contain-
ing up to and including 10% ethanol or other
oxygenates with up to 2.8% oxygen by weight,
that is, 15% MTBE or 3% methanol plus an
equivalent amount of co-solvent, will not void
the applicable warranties with respect to defects

MOBILITY
in materials or workmanship.
The use of poor-quality fuels may result in
driveability, starting and stalling problems
especially under certain environmental condi-
tions such as high ambient temperature and
high altitude.
Should you encounter driveability problems
which you suspect could be related to the fuel
you are using, we recommend that you respond
REFERENCE

by switching to a recognized high-quality brand

such as gasoline that is advertised as Top Tier
Detergent Gasoline.
Failure to comply with these recommendations
may also result in unscheduled maintenance.<

95
Downloaded from www.Manualslib.com manuals search engine
 Wheels and tires
Wheels and tires

Tire inflation pressures The tire inflation pressures apply to the

tire sizes approved and the tire brands
recommended by the manufacturer of your
Information for your safety
MINI. Your MINI Dealer will be glad to advise
It is not merely the tires' service life, but also you.<
driving comfort and, to a great extent, driving
For correct identification of the right tire infla-
safety that depend on the condition of the tires
tion pressures, observe the following:
and the maintenance of the specified tire pres-
sure. > Tire sizes for your vehicle

Website : http://www.softlay.org
Checking pressure
Check the tire inflation pressure regularly
> Load conditions
> Maximum allowable driving speed

and correct it, if necessary: at least twice a Tire inflation pressures for driving up to
month and before starting long trips. If you fail 100 mph or 160 km/h
to observe this precaution you may be driving
For normal driving speeds of up to 100 mph or
on tires with incorrect tire pressures, a condition
160 km/h and to achieve optimum driving com-
that can not only compromise your vehicle's
fort, adjust pressures to the respective tire infla-
driving stability, but also lead to tire damage and
tion pressures listed on the following pages in
the risk of an accident. Do not drive with
the columns for traveling speeds up to a maxi-
deflated, i.e. flat tires, except when using Run-
mum of 100 mph or 160 km/h.
Flat Tires. A flat tire will seriously impair your
vehicle's handling and braking response. These tire inflation pressures can also be found
Attempts to drive on a flat tire can lead to loss of on the driver's-side door post when the driver's
control over the vehicle.< door is open.

Check the tire inflation pressures only on cold

tires. This means after a maximum of 1.25 miles/
2 km driving or when the vehicle has been
parked for at least 2 hours. When tires are warm,
the tire inflation pressure is higher.
After adjusting the tire inflation pressure,
reinitialize the flat tire monitor (page 60),
or reset the tire pressure control (page 62).<

Checking the tire inflation pressure of The maximum permissible speed for these
the compact tire* tire pressures is 100 mph or 160 km/h. Do
To check the inflation pressure, fold up the level not exceed this speed, otherwise tire damage
load floor. Remove the onboard tool kit and the and accidents could occur.<
space-saver spare tire, refer to page 121.

Inflation pressure specifications

The tables below provide all the correct inflation
pressures for the specified tire sizes at ambient
temperature.

96
Downloaded from www.Manualslib.com manuals search engine
 Tire inflation pressures for driving above
100 mph or 160 km/h
In order to drive at maximum speeds in
excess of 100 mph or 160 km/h, adjust
pressures to the respective tire inflation pres-

AT A GLANCE
sures listed on the following pages in the col-
umns for traveling speeds including those
exceeding 100 mph or 160 km/h. Otherwise tire
damage and accidents could occur.<
Observe all national and local maximum speed
limits, otherwise violations of the laws could

Website : http://www.softlay.org
occur.

CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE

97
Downloaded from www.Manualslib.com manuals search engine
 MINI Cooper Clubman tire inflation pressures
Wheels and tires
Tire size Pressure specifications in psi/kPa

Speeds up to a
max. of 100 mph / Speeds including those exceeding
160 km/h 100 mph / 160 km/h

All pressure specifications

in the table are indicated in
psi/kilopascal with cold
tires. Cold = ambient tem-

Website : http://www.softlay.org
perature

195/55 R 16 87 V RSC
195/55 R 16 87 H M+S RSC 32/220 32/220 32/220 32/220 35/240 38/260
195/55 R 16 87 V M+S RSC

175/65 R 15 84 T M+S
175/65 R 15 84 H M+S
175/65 R 15 84 H
175/60 R 16 82 H M+S RSC 35/240 35/240 35/240 35/240 38/260 41/280
205/45 R 17 84 V RSC
205/45 R 17 84 V M+S RSC
205/40 R 18 82 W RSC

Emergency wheel:
60/420 60/420 – – 60/420 60/420
115/70 R 15 90 M

More details on the permissible load and weights can be found on page 144.

98
Downloaded from www.Manualslib.com manuals search engine
 MINI Cooper S Clubman tire inflation pressures

Tire size Pressure specifications in psi/kPa

Speeds up to a

AT A GLANCE
max. of 100 mph / Speeds including those exceeding
160 km/h 100 mph / 160 km/h

All pressure specifications

in the table are indicated in
psi/kilopascal with cold
tires. Cold = ambient tem-

Website : http://www.softlay.org
perature

CONTROLS
195/55 R 16 87 V RSC
195/55 R 16 87 H M+S RSC 35/240 35/240 35/240 35/240 38/260 41/280
195/55 R 16 87 V M+S RSC

205/45 R 17 84 V RSC
205/45 R 17 84 V M+S RSC
38/260 38/260 38/260 38/260 41/280 44/300
205/40 R 18 82 W RSC
175/60 R 16 82 H M+S RSC

DRIVING TIPS
More details on the permissible load and weights can be found on page 144.

MOBILITY
REFERENCE

99
Downloaded from www.Manualslib.com manuals search engine
 MINI John Cooper Works Clubman tire inflation pressures
Wheels and tires
Tire size Pressure specifications in psi/kPa

Speeds up to a
max. of 100 mph / Speeds including those exceeding
160 km/h 100 mph / 160 km/h

All pressure specifications in

the table are indicated in
psi/kilopascal with cold tires.
Cold = ambient temperature

Website : http://www.softlay.org
185/50 R 17 86 H M+S XL RSC
205/45 R 17 84 V M+S RSC 38/260 38/260 38/260 38/260 39/270 45/310
205/45 R 17 84 W RSC

205/40 R 18 82 W RSC 41/280 41/280 41/280 41/280 42/290 48/330

More details on the permissible load and weights can be found on page 144.

100
Downloaded from www.Manualslib.com manuals search engine
 Tire coding under controlled conditions on a specified gov-
ernment test course. For example, a tire graded
Knowledge of the labeling on the side of the tire 150 would wear one and one-half (1γ) times as
makes it easier to identify and choose the right well on the government course as a tire graded
tires. 100. The relative performance of tires depends

AT A GLANCE
upon the actual conditions of their use, how-
Tire size ever, and may depart significantly from the
norm due to variations in driving habits, service
Speed code letter practices and differences in road characteristics
Q = up to 100 mph or 160 km/h and climate.
T = up to 118 mph or 190 km/h
Traction

Website : http://www.softlay.org
H = up to 131 mph or 210 km/h
The traction grades, from highest to lowest, are
V = up to 150 mph or 240 km/h AA, A, B, and C.
W = up to 167 mph or 270 km/h Those grades represent the tire's ability to stop

CONTROLS
Y = up to 186 mph or 300 km/h on wet pavement as measured under controlled
conditions on specified government test sur-
Tire Identification Number faces of asphalt and concrete. A tire marked C
may have poor traction performance.
Tires with DOT codes meet the guidelines of the
US Department of Transportation. The traction grade assigned to this tire is
based on straight-ahead braking traction
DOT code:
tests, and does not include acceleration, corner-
ing, hydroplaning, or peak traction characteris-
Uniform Tire Quality Grading tics.<

DRIVING TIPS
e.g. DOT xxxx xxx 3408
Manufacturer's Temperature
code for tire make The temperature grades are A, the highest, B,
Tire size and and C, representing the tire's resistance to the
tire design generation of heat and its ability to dissipate
Tire age heat when tested under controlled conditions
Quality grades can be found where applicable on a specified indoor laboratory test wheel. Sus-
on the tire sidewall between tread shoulder and tained high temperature can cause the material
maximum section width. For example: of the tire to degenerate and reduce tire life, and

MOBILITY
Tread wear 200 Traction AA excessive temperature can lead to sudden tire
Temperature A failure. The grade C corresponds to a level of
performance which all passenger car tires must
DOT Quality Grades meet under the Federal Motor Vehicle Safety
Standard No. 109. Grades B and A represent
Tread wear
higher levels of performance on the laboratory
Traction AA A B C
test wheel than the minimum required by law.
Temperature A B C
The temperature grade for this tire is
All passenger car tires must conform to
established for a tire that is properly
Federal Safety Requirements in addition
REFERENCE

inflated and not overloaded. Excessive speed,

to these grades.<
underinflation, or excessive loading, either sep-
arately or in combination, can cause heat
Tread wear buildup and possible tire failure.<
The tread wear grade is a comparative rating
based on the wear rate of the tire when tested

101
Downloaded from www.Manualslib.com manuals search engine
 RSC – Run-Flat Tires Wear indicators in the base of the tread groove
Wheels and tires
You will recognize Run-Flat Tires by a circular are distributed around the tire's circumference;
symbol containing the letters RSC on the side of the letters TWI, for Tread Wear Indicator, on the
the tire, page 103. tire's sidewalls identify tires that incorporate
these wear indicators. When tire tread is worn
M+S down to the level of the wear indicators, the
remaining tread depth is 1/16 in/1.6 mm.
Winter and all-season tires.
These have better winter properties than sum-
Tire damage
mer tires.
Please note that low-profile tires cause wheels,
XL tires and suspension parts to be more suscepti-
ble to road hazard and consequential damages.

Website : http://www.softlay.org
Designation for specially reinforced tires.
Unusual vibrations encountered during normal
vehicle operation can indicate tire failure or
some other vehicle defect. This can, for exam-
Tire condition ple, be caused by driving over curbs. The same
Inspect your tires regularly for tread wear, signs applies to any other abnormal road behavior,
of damage and for foreign objects lodged in the such as pulling severely to the right or left.
tread. Check the tread depth. In these cases, reduce speed immediately
and have wheels and tires thoroughly
Tread depth checked. To do so, drive carefully to the nearest
The tread depth should not drop below 1/8 in/ MINI Dealer or tire shop that works according to
3 mm, although, for example, European legisla- MINI repair procedures with correspondingly
tion only specifies a minimum tread depth of trained personnel. If necessary, have the vehicle
1/16 in/1.6 mm. At tread depths below 1/8 in/ towed there.
3 mm there is an increased risk of high-speed Otherwise tire damage can be extremely dan-
hydroplaning, even when only small amounts of gerous for vehicle occupants and other road
water are present on the road surface. users.<

Winter tires Tire age

When winter tires wear down past a tread depth The manufacturing date of tires is contained in
of 1/6 in/4 mm, they become perceptibly less the tire coding:
suitable for winter conditions. In the interest of DOT ... 3408 means that the tire was manufac-
safety, new tires should be installed. tured in week 34 of 2008.
For various reasons, such as the development of
Minimum tread depth brittleness, the manufacturer of your MINI rec-
ommends tire replacement after no more than
6 years, regardless of the actual wear of the
tires.

102
Downloaded from www.Manualslib.com manuals search engine
 Run-Flat Tires* sions, variations in factors such as manufactur-
ing tolerances can result in contact between tire
and bodywork, ultimately leading to serious
accidents. The manufacturer of your MINI can-
not evaluate non-approved wheels and tires to

AT A GLANCE
determine if they are suited for use, and there-
fore cannot ensure the operating safety of the
vehicle if they are mounted.<
Your MINI Dealer will be glad to inform you
about the correct wheel and tire combination for
your vehicle.

Website : http://www.softlay.org
The symbol identifying Run-Flat Tires is a circle The correct combination of wheels and tires is
with the letters RSC on the sidewall. also necessary to ensure reliable operation of
Run-Flat Tires comprise a conditionally self-sup- various vehicle systems such as ABS and DSC.

CONTROLS
porting tire and a special rim. The reinforcement To maintain good handling and vehicle
in the sidewalls ensures that the tire can con- response, use only tires of a single brand and
tinue to be used subject to certain restrictions, tread configuration. After a tire has been dam-
even if depressurized. aged, mount the previous wheel and tire combi-
For information on continuing to drive with a flat nation again as soon as possible.
tire, refer to Indication of a flat tire, page 61.
Wheels with Tire Pressure Monitor TPM
electronics
New wheels and tires When mounting new tires or changing over from

DRIVING TIPS
summer to winter tires, or vice versa, only use
Have new wheels and tires mounted only wheels with TPM electronics; otherwise the Tire
by your MINI Dealer or a specialized tire Pressure Monitor may not be able to detect a
shop that has specially trained personnel work- puncture, refer to page 63. Your MINI Dealer will
ing in accordance with the specifications of the be glad to advise you.
MINI manufacturer. If this work is not carried out
properly, there is a danger of subsequent dam- Recommended tire brands
age and related safety hazards. Make sure that
the new wheels are balanced.<

MOBILITY
Retreaded tires
The manufacturer of your MINI recom-
mends that you avoid using retreaded tires,
as this could impair driving safety. The causes for
this include potentially different tire casing struc-
tures and often wide variations in tire age, which
can result in a limited service life.<
For each tire size, the manufacturer of your MINI
Correct wheels and tires recommends certain tire brands. They are
marked with a clearly visible MINI designation
REFERENCE

The manufacturer of your MINI recom-

on the sidewall of the tire.
mends mounting only wheels and tires
that it has specifically approved for use on your When properly used, these tires meet the high-
particular model. Although other wheels and est standards in terms of safety and handling
tires may theoretically have the same dimen- characteristics.

103
Downloaded from www.Manualslib.com manuals search engine
 Run-Flat Tires* Snow chains*
Wheels and tires
When mounting new tires or changing over from
summer to winter tires and vice versa, mount Only certain types of fine-link snow chains have
Run-Flat Tires for your own safety. Keep in mind been tested by the manufacturer of your MINI,
that no space-saver spare tire is available in the classified as road-safe and recommended. Con-
event of a flat. Your MINI Dealer will be glad to tact your MINI Dealer for more details.
advise you. Only attach snow chains in pairs to the front
wheels with the following tires.
Special characteristics of winter tires > 175/65 R 15 M+S
The manufacturer of your MINI recommends > 175/60 R 16 M+S
winter tires for driving in adverse winter road
MINI John Cooper Works Clubman:

Website : http://www.softlay.org
conditions. Although all-season M+S tires pro-
vide better winter traction than summer tires, > 185/50 R 17 86 H M+S XL RSC
they generally fail to provide the same levels of Observe the manufacturer's instructions when
cold-weather performance as winter tires. mounting snow chains. Do not exceed a speed
of 30 mph or 50 km/h.
Pay attention to speed Do not initialize the Flat Tire Monitor if
Always comply with the speed limit for the snow chains are mounted, otherwise the
winter tires mounted on your car; failure instrument might issue an incorrect reading.
to do so could result in tire damage and acci- When driving with snow chains, it can be useful
dents.< to briefly deactivate the DSC or activate the DTC
If the car is capable of speeds higher than that (see page 59).<
permitted for the winter tires, a label stating the
maximum permitted speed for the mounted
tires must be displayed in your field of view. Spe-
cialist tire dealers and your MINI Dealer can sup-
ply these labels.

Storage
Always store wheels and tires in a cool, dry place
with as little exposure to light as possible.
Always protect tires against all contact with oil,
grease and fuels.
Do not exceed the maximum tire inflation pres-
sure indicated on the sidewall of the tire.

Swapping wheels among the axles

The manufacturer of your MINI recommends
that you do not swap the front wheels with the
rear wheels as this may impair the handling of
your MINI.

104
Downloaded from www.Manualslib.com manuals search engine
 Under the bonnet
Do not work on the car unless you possess Closing
the necessary technical knowledge. If you

AT A GLANCE
are not familiar with the regulations to be
observed, have the necessary work on your
vehicle carried out only by a MINI Dealer or a
workshop that has specially trained personnel
working in accordance with the specifications of
the MINI manufacturer. If this work is not carried

Website : http://www.softlay.org
out properly, there is a danger of subsequent
damage and related safety hazards.<

Close the bonnet from a height of approx. 16 in/

CONTROLS
Bonnet 40 cm with momentum. It must be clearly heard
to engage.
Releasing If you notice any signs while driving your
vehicle that the bonnet is not completely
closed, stop at once and close it securely.
Make sure that the closing path of the bonnet is
clear, otherwise injuries may result.<

DRIVING TIPS
Pull the lever.
Do not clean the windshield and head-
lamps if the bonnet is unlocked as this
may damage the headlamp washer system*.<

MOBILITY
Opening

REFERENCE

To avoid damage, make sure that the

wiper arms are against the windshield
before you open the bonnet.<
Press the release handle and open the bonnet.

105
Downloaded from www.Manualslib.com manuals search engine
 Important parts of the engine compartment
Under the bonnet

Website : http://www.softlay.org

1 Battery, under the cover 125 4 Coolant expansion tank 107

2 Engine oil dipstick 106 5 Reservoir for washer fluid for the headlamp
3 Engine oil filler neck 107 and window washer system 45
6 Engine compartment fuse box 123

Engine oil
The engine oil consumption is dependent on
driving style and driving conditions.

Checking engine oil level

1. With the vehicle's engine at normal operat-
ing temperature, i.e. after uninterrupted
driving for at least 6 miles/10 km, park the
vehicle on a level surface.
The oil quantity corresponding to the difference
2. Switch off the engine. between the two marks on the dipstick is 1 US
3. Pull the dipstick out after approx. 5 minutes quart/1 liter.
and wipe it off with a lint-free cloth, paper Do not fill beyond the upper mark on the
towel or similar material. dipstick. Excess oil will damage the
4. Carefully push the dipstick all the way into engine.<
the guide tube and pull it out again.
The oil level should be between the two
marks on the dipstick.

106
Downloaded from www.Manualslib.com manuals search engine
 Adding engine oil You can also call MINI USA at
1-800-831-1117 or visit the website
www.miniusa.com to obtain this information.

Viscosity grades

AT A GLANCE
Viscosity is a measure of an oil's flow rating and
is categorized in SAE classes.
The correct SAE grade for your MINI is deter-
mined by the climatic conditions of the region in
which you normally drive your MINI.
Do not add the maximum quantity of 1 US The approved oils are SAE 0W-40, 0W-30,

Website : http://www.softlay.org
quart/1 liter of engine oil until the oil level has 5W-40 and 5W-30.<
dropped to just above the lower mark on the These oils can be used for driving at all outside
dipstick, page 106. temperatures.

CONTROLS
Add oil within the next 30 miles/50 km,
otherwise the engine could be dam-
aged.<
Keep oils, greases, etc. out of the reach of Coolant
children and comply with the warnings on
the containers. Otherwise, health hazards may Do not add coolant to the cooling system
result.< when the engine is hot. Escaping coolant
can cause burns.<
Oil change

DRIVING TIPS
Coolant consists of half water and half additive.
Have the oil changed only by a MINI Dealer or a Not all commercially available additives are suit-
workshop that has specially trained personnel able for your MINI. Your MINI Dealer knows
working in accordance with the specifications of which additives are suitable and will be glad to
the MINI manufacturer. advise you.
Only use suitable additives, otherwise
Approved engine oils engine damage may result. Because addi-
The quality of the engine oil selected has critical tives are harmful to your health, it is important
significance for the operation and service life of to follow the instructions on the containers.<
an engine. Based on extensive testing, the man- Comply with the appropriate environmen-

MOBILITY
ufacturer of your MINI approves only certain tal protection regulations when disposing
grades of engine oil on a regular basis. of coolant additives.<
Only use High Performance Synthetic Oil
approved by the manufacturer of your MINI. Checking coolant level
If MINI High Performance Synthetic Oil is not 1. Do not open the bonnet until the engine has
available, you can add small quantities of cooled down.
another synthetic oil in between oil changes. 2. Turn the cap of the expansion tank a little
Only use oils with the API SM specification or counterclockwise to allow any accumulated
higher. pressure to escape, then continue turning to
REFERENCE

If you have any further questions regard- open.

ing MINI High Performance Synthetic Oil 3. The coolant level is correct if it is between
or approved synthetic oils, your MINI Dealer will the Min and Max markings.
be glad to advise you.<

107
Downloaded from www.Manualslib.com manuals search engine
 4. If the coolant is low, slowly add coolant up to
Under the bonnet
the specified level; do not overfill.
5. Turn the cap until there is an audible click.
6. Have the reason for the coolant loss elimi-
nated as soon as possible.

Website : http://www.softlay.org

108
Downloaded from www.Manualslib.com manuals search engine
 Maintenance

MINI Maintenance System Make sure that the date in the tachometer

AT A GLANCE
is always set correctly, page 55; otherwise
the effectiveness of Condition Based Service CBS
is not assured.<

Service and Warranty Information

Booklet for US models and Warranty
and Service Guide Booklet for Canadian

Website : http://www.softlay.org
models
Please consult your Service and Warranty Infor-
mation Booklet for US models and Warranty and

CONTROLS
Service Guide Booklet for Canadian models for
The MINI Maintenance System supports the
additional information on service requirements.
preservation of the traffic and operating safety
of your MINI. The objective is to optimize efforts The manufacturer of the MINI recom-
with respect to minimal vehicle maintenance mends that you have service and repair
costs. operations performed at your MINI Dealer.
Take the time to ensure that these service pro-
If and when you come to sell your MINI, a com-
cedures are confirmed by entries in your vehi-
prehensive record of servicing will prove a signif-
cle's Service and Warranty Information Booklet
icant benefit.
for US models and Warranty and Service Guide

DRIVING TIPS
Booklet for Canadian models. These entries ver-
Condition Based Service CBS
ify that your vehicle has received the specified
Sensors and special algorithms take the different regular maintenance.<
driving conditions of your MINI into account.
Condition Based Service uses this to determine
the current and future service requirements. By
Socket for Onboard
letting you define a service and maintenance
regimen that reflects your own individual Diagnosis OBD
requirements, the system builds the basis for
trouble-free driving.

MOBILITY
In the tachometer, you can have the remaining
times or distances for selected maintenance
tasks and any legally prescribed dates displayed,
page 53.

Service data in the remote control

Your vehicle continuously stores service-
requirement information in the remote control
while you are driving. Your MINI Dealer can read Primary components that make up exhaust
REFERENCE

out this data from the remote control unit, and emissions can be checked by a device via the
propose an optimized maintenance approach. OBD socket.
Whenever you take your car in for servicing you This socket is located to the left of the driver's
should therefore hand your MINI Dealer the side, on the bottom of the instrument panel.
remote control unit that you last used.

109
Downloaded from www.Manualslib.com manuals search engine
 Exhaust emission values
Maintenance
The warning lamps come on. The
exhaust emission values have turned
poor and there is a danger of engine
damage. You can continue your jour-
ney, but moderate your speed and exercise due
caution. Have the car checked as soon as possi-
ble.
Under certain circumstances, one of the lamps
will flash or light up continuously. This indicates
excessive misfiring or a malfunction in the

Website : http://www.softlay.org
engine. If this happens, reduce your speed and
visit the nearest MINI Dealer as soon as possible.
Severe misfiring can quickly lead to serious dam-
age of emissions-related components, espe-
cially the catalytic converter. In addition,
mechanical engine components can become
damaged.
If the fuel filler cap is not properly tightened, the
OBD system may conclude that fuel vapors are
escaping, causing an indicator to light up. If the
filler cap is then tightened, the indicator should
go out within a few days.

Event data recorders

Your vehicle may be equipped with one or sev-
eral measuring or diagnostic modules or a
device for recording or sending certain vehicle
data or information.

110
Downloaded from www.Manualslib.com manuals search engine
 Care

Car-care products Car washes

AT A GLANCE
Preference should be given to cloth car washes.
Regular cleaning and care helps to maintain the
Do not use high-pressure car washes
value of your MINI.
because drops of water can penetrate
The manufacturer of your MINI recommends around the windows.<
using manufacturer-approved products to clean
Before driving into the car wash, check if the sys-
and care for your vehicle.
tem is suitable for your MINI. Observe the fol-
MINI Service would be pleased to advise you on

Website : http://www.softlay.org
lowing points:
cleaning and care products and services for your
> Dimensions of the vehicle, page 143
MINI.
> If necessary: Fold in the outside mirrors
The ingredients of original MINI CareProd-

CONTROLS
(page 33)
ucts have been tested, and the products
have been tested in the laboratory and in prac- > Maximum permissible tire width
tice. They offer optimum care and protection for Preparations for driving into the car wash:
your vehicle.<
> Unscrew the rod antenna.
Do not use any cleansers containing alco-
> Deactivate the rain sensor* to prevent unin-
hol or solvents as these may cause dam-
tentional wiping.
age.<
> Deactivate the rear windshield wiper and
Cleaning agents may contain hazardous
protect it from damage. Ask the car wash

DRIVING TIPS
or health-damaging substances. Follow
operator about measures that can be taken
the warning and hazard instructions on the
to protect the wipers.
packaging. For interior cleaning, always open
the doors or windows of the vehicle. > Remove additional detachable body com-
Do not use any products that are not intended ponents such as spoilers or telephone
for cleaning the vehicle.< antennas that could be damaged.

Automatic transmission
External care Before driving into the car wash, make sure that
the vehicle can roll:

MOBILITY
Washing your vehicle 1. Place the remote control, even with conve-
Especially during the winter months the nient access, in the ignition lock.
vehicle should be frequently washed. Dirt 2. Move the selector lever to position N.
and road salt can damage the vehicle.< 3. Release the parking brake.
After washing the vehicle, apply the 4. Switch off the engine.
brakes briefly to dry them, otherwise
5. Insert the remote control in the ignition lock
water can reduce braking efficiency over the
so that the vehicle can roll.
short term and the brake rotors can corrode.<
REFERENCE

111
Downloaded from www.Manualslib.com manuals search engine
 Steam jets/high-pressure washers Wiper blades
Care
When using steam jets or high-pressure Clean with soapy water and change regularly to
washers, ensure that you maintain a suffi- prevent the formation of streaks
cient distance to the vehicle and do not exceed a Wax, preservatives and dirt on the windows
maximum temperature of 1407/60 6. cause streaks when the windshield wipers
If the distance is too close, the pressure too high, are on, and can cause premature wear of the
or the temperature too high, parts of the vehicle wiper blades and interfere with the rain sensor.<
can be damaged, or water can penetrate.
Observe the operating instructions for high- Paintwork, care
pressure washers.<
Regular care contributes greatly to driving safety
Do not spray sensors such as Park Dis- and value retention.

Website : http://www.softlay.org
tance Control with high-pressure washers
In some regions, environmental factors can
for a long time or at a distance of less than
affect the vehicle paintwork and damage it. It is
1 ft/30 cm.<
therefore important to adjust the frequency and
extent of vehicle care correspondingly.
Manual washing
Immediately remove aggressive materials such as
Use a great deal of water and, if necessary, car
spilled fuel, oil, grease, brake fluid, tree sap or bird
shampoo when washing your car by hand. Clean
droppings to prevent damage to the paintwork.
the vehicle with a sponge or a washing brush
applying a slight amount of pressure.
Removing paintwork damage
Before cleaning the windshield, deacti-
Depending on the severity of the damage,
vate the rain sensor or turn off the ignition
immediately repair stone damage or
to prevent unintentional wiping.<
scratches to prevent rusting.<
Observe local regulations regarding wash-
The manufacturer of the MINI recommends
ing vehicles by hand.<
repairing paint damage professionally according
to factory specifications with original MINI
Headlamps
paints.
Do not wipe dry and do not use abrasive or cor-
rosive cleaning agents. Remove dirt and con- Preservation
tamination, such as insects, by soaking with
Preservation is necessary when water no longer
shampoo and then washing with plenty of
beads on the clean paint surface. To preserve
water.
the paint, only use preservatives that contain
Do not remove accumulated ice and snow with carnauba or synthetic waxes.
an ice scraper; use window de-icers instead.
Rubber seals
Windows
Only treat with water or rubber care products.
Clean the outside and inside of the windows and
Do not use silicon sprays or other silicon-
mirrors with a window cleaner.
containing care products on rubber seals,
Do not clean the mirrors with cleaners otherwise noise and damage could occur.<
containing quartz.<
Chrome parts*
Carefully clean vehicle parts such as the radiator
grill and door handles with copious quantities of
water and, if necessary, a shampoo additive,
especially when contaminated with road salt.
For additional treatment, use chrome polish.

112
Downloaded from www.Manualslib.com manuals search engine
 Light-alloy wheels* Especially when the leather has a light color, it
The system produces brake dust that collects on should be cleaned regularly since it tends to get
the light alloy wheels. Clean them regularly with heavily soiled.
acid-free wheel cleaner. Treat the leather twice a year using a leather
Do not use aggressive, acid-containing lotion since dirt and grease will gradually attack

AT A GLANCE
highly alkaline or abrasive cleansers or the leather's protective layer.
steam jets above 1407/606 as they may
cause damage.< Carpets/floor mats*
You can use a vacuum cleaner on carpets and
External sensors floor mats, or clean them with interior cleaners
Keep the outside sensors on the vehicle when they are very dirty.

Website : http://www.softlay.org
such as the Park Distance Control clean Floor mats can be removed to be cleaned. When
and ice-free to ensure that they function prop- putting the floor mats, back in, make sure that
erly.< the seat rails do not extend over the floor mats

CONTROLS
as this may damage them.
Lint on floor mats arises from manufacturing
Internal care and can be removed by repeated vacuuming.

Upholstery/Fabrics Interior plastic parts

Regularly use a vacuum cleaner to remove sur- These include:
face dirt. > Plastic surfaces
In case of serious spots such as liquid stains, use > Lamp glass

DRIVING TIPS
a soft sponge or lint-free microfiber cloth and
> Display panes
suitable interior cleaners. Observe the instruc-
tions on the packaging. > Matte parts
Clean upholstery up to the seams. Do not Only clean with water and, if necessary, solvent-
rub forcefully.< free plastic cleaners.
Velcro fasteners on pants or other items of Do not use solvents such as alcohol, lac-
clothing can damage seat covers. Make quer thinner, cold cleaners, fuel, or similar,
sure that all Velcro fasteners are closed.< as these will damage the surfaces.<

Leather/leather coverings* Decorative strips*

MOBILITY
The leather processed by the manufac- Only clean decorative strips with moist cloths.
turer of your MINI is a high-quality natural Wipe dry with a soft cloth.
product. Light variations in the grain is one of
the typical properties of natural leather.< Safety belts
Dust and road grit in the pores and folds of the Do not use cleansers since they can
leather have an abrasive effect, leading to destroy the fabric.<
increased wear and causing the leather surface
to become brittle prematurely. The leather
should therefore be regularly cleaned with a
REFERENCE

cloth or a vacuum cleaner.

113
Downloaded from www.Manualslib.com manuals search engine
 Displays
Care
To clean displays such as radios or display ele-
ments, use a display cleaning cloth or a soft,
non-scratching, lint-free cloth.
Avoid pressing too hard when cleaning
the display as this can cause damage.<
Do not use chemical or abrasive house-
hold cleaning agents. Keep fluids of any
kind away from the device. Surfaces or electrical
components may otherwise become corroded
or damaged.<

Website : http://www.softlay.org
CD/DVD drives
Do not use cleaning CDs as this could
damage parts of the drive.<

Vehicle storage
If you are not going to drive your car for more
than three months, please ask for advice from
your MINI dealer or a workshop that works
according to MINI manufacturer specifications.

114
Downloaded from www.Manualslib.com manuals search engine
 Replacing components

Onboard tool kit To avoid damage, make sure that the

AT A GLANCE
wiper arms are against the windshield
before you open the bonnet.<

Changing the rear wiper blade

Website : http://www.softlay.org

CONTROLS
Your vehicle comes with an onboard tool kit that
varies with the equipment version; it is stored
underneath the level load floor.
> Mobility System with onboard tool kit and 1. Fold out the wiper arm and hold it.
tire change set* 119 2. Press together the locking spring, arrow 1,
> Tire change set with onboard tool kit for and fold out the wiper blade.
space-saver spare tire 121 3. Pull the wiper blade away from and out of
the catch mechanism, arrow 2.

DRIVING TIPS
4. Press the new wiper blade into the fixture
Wiper blades until it engages audibly.

Changing the front wiper blades

1. Fold up the wiper arm. Lamps and bulbs
Lamps and bulbs make an essential contribution
to vehicle safety. They should, therefore, be
handled carefully. The manufacturer of your
MINI recommends having your MINI Dealer per-

MOBILITY
form any work that you do not feel competent to
perform yourself or that is not described here.
Never touch the glass of new bulbs with
your bare fingers, as even minute
amounts of contamination will burn into the
2. Position the wiper blade horizontally. bulb's surface and reduce its service life. Use a
clean tissue, cloth or something similar, or hold
3. Press the securing spring, arrow.
the bulb by its base.<
4. Unhook the wiper blade toward the wind-
You can obtain a selection of replacement bulbs
REFERENCE

shield.
at your MINI Dealer.
5. Pull the wiper blade past the wiper arm
toward the top.
6. Insert the new wiper blade.
7. Press into position until you hear it engage.

115
Downloaded from www.Manualslib.com manuals search engine
 When working on electrical systems, Halogen low beams and high beams
Replacing components
always begin by switching off the con- H13 bulb, 60/55 watts
sumer in question, otherwise short circuits could
The H13 bulb is pressurized. Therefore,
result. To avoid possible injury or equipment
wear safety glasses and protective gloves.
damage when replacing bulbs, observe any
Otherwise there is a risk of injury if the bulb is
instructions provided by the bulb manufac-
damaged.<
turer.<
Be careful when installing the cover, oth-
Caring for headlamps, refer to page 112.
erwise leaks could occur and cause dam-
For any bulb replacement not described age to the headlamp system.<
below, contact a MINI Dealer or a work-
shop that has specially trained personnel work- Accessing the lamp from the engine

Website : http://www.softlay.org
ing in accordance with the specifications of the compartment
MINI manufacturer.<
The low-beam/high-beam bulb can be changed
For checking and adjusting headlamp aim, from the engine compartment.
please contact your MINI Dealer.<

Light-emitting diodes LEDs

Light-emitting diodes installed behind translu-
cent lenses serve as the light sources for many of
the controls and displays in your vehicle. These
light-emitting diodes are related to conven-
tional laser diodes, and legislation defines them
as Class 1 light-emitting diodes.
Do not remove the covers or expose the
eyes directly to the unfiltered light source Removing the cover:
for several hours, otherwise this could cause irri- 1. Press the tab.
tation to the retina.< 2. Flip open the cover and take it out of the
holder.
Bi-Xenon lamps*
Follow the same steps in reverse order to reat-
The service life of these bulbs is very long and tach the cover.
the probability of failure very low, provided that
Be careful when installing the cover, oth-
they are not switched on and off an excessive
erwise leaks could occur and cause dam-
number of times. If a xenon lamp fails neverthe-
age to the headlamp system.<
less, switch on the fog lamps and continue the
journey with great care, provided that local leg-
islation does not prohibit this. Replacing the bulb
Have any work on the xenon lamp system, 1. Turn the lamp counterclockwise, arrow 1,
including bulb replacement, carried out and remove it, arrow 2.
only by a MINI Dealer or a workshop that has
specially trained personnel working in accor-
dance with the specifications of the MINI manu-
facturer. Due to high voltage, there is a risk of
fatal injury if work on the xenon lamps is carried
out improperly.<

116
Downloaded from www.Manualslib.com manuals search engine
 2. Push on the catch, arrow 1, and unplug the 3. Remove the inside cover.
connector, arrow 2. To do so, turn the cover counterclockwise.

AT A GLANCE
Website : http://www.softlay.org
3. To insert the new bulb and replace the 4. Screw out the bulb counterclockwise.
cover, proceed in reverse order.

CONTROLS
Turn signal indicators, parking lamps,
roadside parking lamps and fog lamps

Accessing the lamps via the wheel well

5. To insert the new bulb and replace the cov-

DRIVING TIPS
ers, proceed in reverse order.

Replacing a parking/roadside parking

lamp bulb
5 watt bulb, W 5 W
1 Turn signal
1. Turn in the wheel.
2 Parking/roadside parking/fog lamps
2. Remove cover 2.
Replacing a turn signal bulb To do so, turn the cover counterclockwise.

21 watt bulb, PY 21 W 3. Screw out the upper bulb counterclockwise.

MOBILITY
1. Turn in the wheel.
2. Remove cover 1.
To do so, turn the cover counterclockwise.
REFERENCE

4. To insert the new bulb and replace the

cover, proceed in reverse order.

117
Downloaded from www.Manualslib.com manuals search engine
 Replacing a fog lamp bulb Tail lamps
Replacing components
H8 bulb, 35 watts
1. Turn in the wheel.
2. Remove cover 2.
To do so, turn the cover counterclockwise.
3. Screw out the lower bulb counterclockwise.

1 Brake lamp/tail lamp

Website : http://www.softlay.org
21 watt/5 watt bulb, W 5 W
2 Turn signal lamp
21 watt bulb, P 21 W
3 Rear fog lamp* P 21 W
4 Backup lamp
4. To insert the new bulb and replace the
21 watt bulb, P 21 W
cover, proceed in reverse order.

Changing
Side turn signal indicators
1. Using the screwdriver from the onboard tool
5 watt bulb, W 5 W
kit, remove the screw at the top.
1. Push the lamp with the ventilation grate for-
ward and remove.

2. Swing out the tail lamp and remove it

toward the top.
2. Screw out the bulb holder counterclockwise.
3. Pull off the cable connector 1, unlock the
3. Pull out and replace the bulb. bulb holder, arrow 2, and remove it,
4. To insert the new bulb and replace the arrow 3.
cover, proceed in reverse order.

118
Downloaded from www.Manualslib.com manuals search engine
 4. Screw out the respective bulb counterclock- the selector lever in position P.
wise. All passengers should be outside the vehicle and
5. To insert the new bulb and reinstall the tail in a safe place, e.g. behind a guardrail.
lamp, proceed in reverse order. Erect a warning triangle or warning flasher at the
appropriate distance if necessary. Comply with

AT A GLANCE
Rear fog lamp* all safety guidelines and regulations.<

21 watt bulb, P 21 W In the event of a flat tire, different procedures

should be followed depending on the equip-
The rear fog lamp is located in the left tail
ment included in your vehicle:
lamp (see Tail lamps page 118.<
> MINI Mobility System, refer to the following
License plate lamps section

Website : http://www.softlay.org
5 watt bulb, C 5 W > Run-Flat Tires, page 103
> Tire change with space-saver spare tire,
page 121

CONTROLS
MINI Mobility System with onboard tool
kit and tire change set*
The MINI Mobility System with tire change set
and onboard tool kit is located under the floor
mat or the level load floor in the cargo bay.

1. Using a screwdriver, push the lamp to the

DRIVING TIPS
left in the tab of the lamp housing, arrow 1.
2. Remove the lamp, arrow 2.
3. Replace the bulb.
4. Insert the lamp.

Center brake lamp

This lamp uses LED technology for operation. In 1 Compressor, hose with manometer and plug
the event of a malfunction, contact your MINI for cigarette lighter socket
Dealer or a workshop that has specially trained
2 Filling hose

MOBILITY
personnel working in accordance with the spec-
ifications of your MINI manufacturer. 3 Wheel stud wrench*
4 Vehicle jack*
5 Torx insert bit for screwdriver
Repairing a flat tire 6 Flat screwdriver/Phillips screwdriver, towing
Safety measures in the event of a break- eyelet
down: 7 Hub cover remover
Park the vehicle as far as possible from moving 8 Filling canister
REFERENCE

traffic and switch on the hazard warning flash-

Use of the MINI Mobility System may be
ers.
ineffective if the tire puncture measures
Turn the steering wheel until the front wheels
approx. 1/8 in/4 mm or more. Contact the near-
are in the straight-ahead position and engage
est MINI Dealer if the tire cannot be made driv-
the steering wheel lock. Engage the parking
able with the MINI Mobility System.<
brake and shift into 1st or reverse gear or place

119
Downloaded from www.Manualslib.com manuals search engine
 Liquid sealant Compressor
Replacing components

1 Filling hose 1 Hose with manometer

Website : http://www.softlay.org
2 Filling canister

Filling
2
3
Compressor
Connector for power supply

1. Shake the filling canister. Reinflating the tire

2. Screw the filling hose onto the filling canis- 1. Screw hose 1 with manometer onto the tire
ter. valve.
3. Unscrew the dust cap from the valve of the 2. Insert connector 3 into the lighter socket in
defective tire. the interior of the vehicle, page 81.
4. Screw out the valve core with the valve 3. Switch on compressor 2.
remover. The valve remover is located in a 4. Inflate the tire to at least 26 psi/180 kPa and
package with the filling hose. at most 36 psi/250 kPa.
5. Remove the cap from the filling hose. To check the air pressure, shut off the device
6. Push the filling hose onto the tire valve. for a short time.

7. Hold the filling canister with the cap down Do not run the compressor for longer
and squeeze. than 6 minutes, otherwise the device
will overheat and possibly be damaged.<
8. Squeeze the entire contents of the canister
into the tire. If an air pressure of 26 psi/180 kPa is not
reached:
9. Remove the filling hose.
1. Unscrew hose 1 and drive the vehicle for-
10. Screw the valve core into the tire valve with
ward and backward about 33 ft/10 m to dis-
the valve remover.
tribute the liquid sealant in the tires evenly.
In the event of a lost or dirty valve core
2. Repeat the procedure.
you will find another valve core in the
package with the filling hose. If an air pressure of 26 psi/180 kPa still can-
Remember that the liquid canister must be not be reached, the tire is too severely dam-
replaced every four years if the equipment has aged. Please contact the nearest MINI Dealer.<
not been used.<
Distributing liquid sealant
Immediately drive for approx. 10 minutes, so
that the liquid sealant is uniformly distributed.
Do not exceed speeds of 40 mph/
60 km/h.
If possible, do not drop below 10 mph/
20 km/h.<

120
Downloaded from www.Manualslib.com manuals search engine
 Checking tire inflation pressure > Tighten lug bolts, page 123
1. After driving for approx. 10 minutes, pull > Drive with space-saver spare tire, page 122
over at a suitable location.
2. Screw the hose with manometer back onto Tire change set for a space-saver spare
the tire valve. tire*

AT A GLANCE
3. Check the tire inflation pressure.
The tire pressure must be at least
18 psi/130 kPa. If it is not, do not con-
tinue driving.<
If a tire pressure of at least 18 psi/130 kPa is dis-
played:

Website : http://www.softlay.org
1. Switch on the compressor. Correct the tire
inflation pressure to the specified value,

CONTROLS
page 96.
In vehicles with the space-saver spare tire, the
2. Replace the tire as soon as possible. tire change set with the onboard tool kit is
located beneath the floor mat or level load floor
Driving on in the cargo bay.
Do not exceed the permitted maximum 1 Folding chock and cover for defective wheel
speed of 50 mph/80 km/h; doing so may
2 Vehicle jack
result in an accident.<
3 Wheel stud wrench
Replace the defective tire as soon as possible
and have the new wheel/tire assembly bal- 4 Hub cover remover

DRIVING TIPS
anced. 5 Flat screwdriver/Phillips screwdriver
Have the MINI Mobility System refilled. 6 Torx insert bit for screwdriver
7 Towing eye
Tire change set
The onboard tool kit includes a pouch with a
When changing a tire, always observe the safety plastic bag in which you can place the damaged
measures and the procedure for changing tires wheel.
described below.
In case of a flat tire the tire change set is Removing the space-saver spare tire
not needed due to the availability of the The space-saver spare tire is located under the

MOBILITY
MINI Mobility System.< tire change set in the cargo bay.
1. Fold up the floor mat.

Changing wheels 2. Unscrew the nut, arrow, and remove the

space-saver spare tire.
Space-saver spare tire*
To change a space-saver spare tire, proceed as
follows:
REFERENCE

> Remove space-saver spare tire, page 121

> Prepare for tire change, page 122
> Jack up vehicle, page 122
> Mount space-saver spare tire, page 122

121
Downloaded from www.Manualslib.com manuals search engine
 Driving with the space-saver spare tire Jacking up the vehicle
Replacing components
Drive cautiously and do not exceed a
speed of 50 mph/80 km/h. Changes may
occur in vehicle handling such as lower track sta-
bility during braking, longer braking distances
and changes in self-steering properties when
close to the handling limit. These properties are
more noticeable with winter tires.<
Only one space-saver spare tire may be
mounted at one time. Mount a wheel and The vehicle jack is designed for changing
tire of the original size as soon as possible, to wheels only. Do not attempt to raise
another vehicle model with it or to raise any load

Website : http://www.softlay.org
avoid any safety risks.<
of any kind. To do so could cause accidents and
Check the tire inflation pressure at the ear-
personal injury.<
liest opportunity and correct it if neces-
sary. Replace the defective tire as soon as possi- 1. Place the jack at the jacking point closest to
ble and have the new wheel/tire assembly the wheel.
balanced.< The jack base must be perpendicular to the
surface beneath the jacking point.
Preparing for a tire change
Observe the safety precautions regarding
flat tires on page 119.<
Additional safety measures when chang-
ing tires:
Only change the tire when parked on a surface
that is level, firm and not slippery.
The vehicle or the jack could slip sideways on
soft or slippery support surfaces, such as snow,
ice, flagstones, etc. 2. During jacking up, insert the jack head in the
Do not use a wooden block or similar object as a square recess of the jacking point.
support base for the jack, as this would prevent
3. Jack the vehicle up until the wheel you are
it from extending to its full support height and
changing is raised off the ground.
reduce its load-carrying capacity.
Do not lie under the vehicle or start the engine
when the vehicle is supported by the jack; other- Mounting the space-saver spare tire
wise there is a risk of fatal injury.< 1. Unscrew the lug bolts and remove the wheel.
1. Place the foldable chock* behind the front 2. Remove accumulations of mud or dirt from
wheel on the other side of the vehicle or in the mounting surfaces of the wheel and
front of the wheel if the vehicle is on an hub. Clean the lug bolts.
incline. If the wheel is changed on a surface 3. Lift the new wheel into place.
with a more severe slope, take additional
4. Screw at least two lug bolts finger-tight into
precautions to secure the vehicle from rolling.
opposite bolt holes.
2. Uncover the lug bolts if necessary.
5. Screw in the remaining bolts.
If the wheel is equipped with a hub cover,
6. Tighten all the lug bolts firmly in a diagonal
pry it off using the screwdriver from the tire
pattern.
change kit.
7. Lower the vehicle.
3. Loosen the lug bolts by a half turn.
8. Remove the jack.

122
Downloaded from www.Manualslib.com manuals search engine
 Tightening the lug bolts Power failure
Tighten the lug bolts in a diagonal pattern. After a temporary power loss, some equipment
Immediately have the wheels checked may not be fully functional and may require ini-
with a calibrated torque wrench to ensure tialization. Individual settings are also lost and
that the lug bolts are firmly seated. Otherwise, must be reprogrammed:

AT A GLANCE
incorrectly tightened lug bolts can present a > Time and date
safety hazard.< These values must be updated, page 54.
Tightening torque: 103.3 lb ft or 140 Nm. > Radio
Replace the defective tire as soon as possible Stations must be stored again, refer to the
and have the new wheel/tire assembly bal- separate Owner's Manual for Radio.
anced. > Glass sunroof, electric

Website : http://www.softlay.org
It may only be possible to raise the sunroof,
if applicable. The system must be initialized.
Vehicle battery Contact your nearest MINI Dealer.

CONTROLS
Have any work on the battery, including
battery replacement, carried out only by a Fuses
MINI Dealer or a workshop that has specially
trained personnel working in accordance with Do not attempt to repair a blown fuse or
the specifications of the MINI manufacturer.< replace it with a fuse of a different color or
Ampere rating. To do this could cause a fire in
Battery care the vehicle resulting from a circuit overload.
The battery is 100% maintenance-free, the Have the fuse changed only by a MINI Dealer or

DRIVING TIPS
electrolyte will last for the life of the battery a workshop that has specially trained personnel
when the vehicle is operated in a temperate cli- working in accordance with the specifications of
mate. the MINI manufacturer.<
A fuse allocation diagram is located on the inside
Charging the battery of the fuse box cover panels.
Only charge the battery in the vehicle when the
engine is off. Connections, refer to Jump starting In the engine compartment
on page 125.

Disposal

MOBILITY
After replacing old batteries, return the
used batteries to your MINI Dealer or to a
recycling point. Maintain the battery in an
upright position for transport and storage.
Always secure the battery against tipping over
during transport.<

Opening the cover

Press the latch.
REFERENCE

123
Downloaded from www.Manualslib.com manuals search engine
 In the vehicle interior
Replacing components

On the right side of the footwell.

Website : http://www.softlay.org
Opening the cover
Press out at the recess.

124
Downloaded from www.Manualslib.com manuals search engine
 Giving and receiving assistance

Roadside Assistance Jump starting

AT A GLANCE
The Roadside Assistance service is there to assist If the car's own battery is flat, your MINI's engine
you around the clock in the event of a breakdown, can be started by connecting two jumper cables
including on weekends and public holidays. to another vehicle's battery. You can also use
The phone numbers of the Roadside Assistance the same method to help start another vehicle.
in your home country can be found in the Con- Only use jumper cables with fully-insulated
tact brochure. clamp handles.

Website : http://www.softlay.org
Do not touch any electrically live parts
when the engine is running, or a fatal acci-
First aid pouch* dent may occur. Carefully adhere to the follow-

CONTROLS
ing sequence, both to prevent damage to one or
Some of the articles contained in the first aid pouch both vehicles, and to guard against possible per-
have a limited service life. Therefore, check the sonal injuries.<
expiration dates of the contents regularly and
replace any items in good time, if necessary. Preparation
1. Check whether the battery of the other vehi-
cle has a voltage of 12 volts and approxi-
mately the same capacitance in Ah. This
information can be found on the battery.

DRIVING TIPS
2. Switch off the engine of the support vehicle.
3. Switch off any consumers in both vehicles.
There must not be any contact between
the bodies of the two vehicles, otherwise
there is a danger of shorting.<
The first aid pouch is located on the cargo bay
floor by the left side trim panel or under the level Connecting jumper cables
load floor.
Connect the jumper cables in the correct
order, so that no sparks which could cause

MOBILITY
injury occur.<
Warning triangle* 1. Open the battery cover in the engine com-
partment to access the positive terminal of
your MINI.
REFERENCE

In the cargo bay under the loading sill.

Open the center lock to take it out.

125
Downloaded from www.Manualslib.com manuals search engine
 2. Attach one terminal clamp of the plus/+ Tow-starting, towing
Giving and receiving assistance
jumper cable to the positive terminal of the
battery or to a starting-aid terminal of the away
vehicle providing assistance. Observe the applicable laws and regula-
3. Attach the second terminal clamp of the tions for tow-starting and towing vehi-
plus/+ jumper cable to the positive terminal cles.<
of the battery or a starting-aid terminal of Do not transport any passengers other
the vehicle to be started. than the driver in a vehicle that is being
4. Attach one terminal clamp of the minus/– towed.<
jumper cable to the negative terminal of the
battery or to an engine or body ground of Using a tow fitting

Website : http://www.softlay.org
the assisting vehicle. The screw-in tow fitting must always be carried
Body ground in MINI: in the car. It can be screwed in at the front or
rear of the MINI.
It is stored in the onboard tool kit in the cargo
bay underneath the cover on the right-hand
side, page 115.
Use only the tow fitting provided with the
vehicle and screw it all the way in. Use the
tow fitting for towing on paved roads only. Avoid
lateral loading of the tow fitting, e.g. do not lift
the vehicle by the tow fitting. Otherwise the tow
fitting and the vehicle could be damaged.<
5. Attach the second terminal clamp of the
minus/– jumper cable to the negative termi-
nal of the battery or to the engine or body Access to screw thread
ground of the vehicle to be started. Push out the cover of the towing eye out of the
recess in the bumper.
Starting the engine
1. Start the engine of the donor vehicle and
allow it to run for a few minutes at slightly
increased idle speed.
2. Start the engine of the other vehicle in the
usual manner.
If the first start attempt is not successful,
wait a few minutes before another attempt
in order to allow the discharged battery to
recharge.
3. Let the engines run for a few minutes.
4. Disconnect the jumper cables by reversing
the above connecting sequence.
If necessary, have the battery checked and
recharged.
Never use spray fluids to start the
engine.<

126
Downloaded from www.Manualslib.com manuals search engine
 Front Towing with a tow bar
The towing vehicle must not be lighter
than the towed vehicle, otherwise it may
be impossible to maintain control.<
The tow fittings used should be on the same side

AT A GLANCE
on both vehicles. Should it prove impossible to
avoid mounting the tow bar at an angle, please
observe the following:
> Clearance and maneuvering capability will
be sharply limited during cornering.
Rear > The tow bar will generate lateral forces if it is

Website : http://www.softlay.org
attached offset.
Attach the tow bar to the tow fittings only,
as attaching it to other parts of the vehicle

CONTROLS
could result in damage.<

Towing with a tow rope

When starting off in the towing vehicle, make
sure that the tow rope is taut.
To avoid jerking and the associated
stresses on vehicle components when
Being towed
towing, always use nylon ropes or nylon straps.
Make sure that the ignition is switched on,

DRIVING TIPS
Attach the tow rope to the tow fittings only, as
refer to page 38, otherwise the low attaching it to other parts of the vehicle could
beams, tail lamps, turn signal indicators and result in damage.<
windshield wipers may be unavailable. Do not
tow the vehicle with just the rear axle raised, as Towing with a tow truck
this would allow the steering to turn. <
There is no power assist while the engine is off.
Thus, braking and steering will require increased
effort.
Switch on the hazard warning flashers, depend-

MOBILITY
ing on local regulations.

Manual transmission
Gearshift lever in neutral position.
Have the MINI transported with a tow truck with
Automatic transmission a so-called lift bar or on a flat bed.
Tow vehicles with automatic transmission Do not lift the vehicle by a tow fitting or
only with a tow truck or with the front body and chassis parts, otherwise damage
wheels lifted; otherwise the transmission can be
REFERENCE

may result.<
damaged.<

127
Downloaded from www.Manualslib.com manuals search engine
 Tow-starting
Giving and receiving assistance
Avoid tow-starting the vehicle whenever possi-
ble; instead, jump-start the engine, page 125.
Vehicles with a catalytic converter should only
be tow-started when the engine is cold, vehicles
with an automatic transmission cannot be tow-
started at all.
1. Switch on hazard warning flashers, comply
with local regulations.
2. Switch on the ignition, page 38.
3. Shift into 3rd gear.

Website : http://www.softlay.org
4. Have the vehicle tow-started with the clutch
completely depressed and then slowly
release the clutch. After the engine starts,
immediately depress the clutch completely
again.
5. Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6. Have the vehicle checked.

128
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning lamps
Indicator and warning lamps can light up in var-
ious combinations and colors in indicator area 1

AT A GLANCE
or 2. See the table for information on causes and
how to react. Note whether a lamp comes on
alone or in combination with another. Some
lamps can light up in different colors. Corre-
sponding distinctions are made in the text.

Website : http://www.softlay.org
1 2 Cause What to do

CONTROLS
Turn signals

High beams/headlamp flasher

switched on

Fog lamps switched on

Rear fog lamp switched on

DRIVING TIPS
Fasten safety belts Fasten your safety belt, refer also to
page 32.

Indication in US models

Parking brake applied Release the parking brake.

MOBILITY
Indication in Canadian models

Parking brake applied Release the parking brake.

Danger of icy roads Drive cautiously, refer also to page 48.

REFERENCE

129
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning lamps
1 2 Cause What to do

Lights up briefly:

Approx. 2.1 US gallons/8 l of fuel

remain in the tank

Remains on:

Cruising range is no more than 50 km,

page 49

Engine refuses to start Depress the brake or clutch in order to

Website : http://www.softlay.org start the engine, page 38.

Ignition switched on and driver's door Switch off the ignition, page 38, or close
open the driver's door.

Lamps still on

Roadside parking lamps on

Door open

Clubdoor open

Splitdoor open

Bonnet open

Gas cap missing or loose Make sure that the gas cap is correctly
positioned and close it until it audibly
clicks. Do not jam the strap between the
gas cap and the vehicle.

Window washer fluid level too low Add washer fluid as soon as possible,
page 45.

130
Downloaded from www.Manualslib.com manuals search engine
 1 2 Cause What to do

Lights up in yellow:

The engine will start the next time the

AT A GLANCE
start/stop button is touched, possibly
without the brake or clutch being
depressed

Remote control malfunctioning or, in The engine cannot be started. Have the
cars with convenient access, not remote control checked, if necessary.
detected

Website : http://www.softlay.org
Battery in remote control discharged Use the remote control for a longer
journey or, in cars with convenient
access, replace the battery.

CONTROLS
Belt tensioners and/or airbag system Have the system checked immediately.
failed Fasten the safety belts anyway.

Power steering failed You can continue your journey, but

moderate your speed and exercise
due caution. Steering response will be
markedly different. Have the system

DRIVING TIPS
checked without delay.

Lights up:

Emergency calling system failed or Have the system checked as soon as

malfunctioning possible.

Lights up in red:

Engine malfunction Stop the car and switch off the

engine. You cannot continue your

MOBILITY
journey. Contact your MINI Dealer.

Lights up in yellow:

Full engine power no longer available You can continue your journey, but
moderate your speed and exercise due
caution. Have the engine checked as
soon as possible.

Indicator lamp 1 flashes:

REFERENCE

Engine malfunction under high load. You can continue your journey, but
High engine load will result in damage moderate your speed and exercise due
to the catalytic converter caution. Have the vehicle checked with-
out delay.

131
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning lamps
1 2 Cause What to do

Indicator lamp 1 comes on:

Engine malfunction with adverse effect You can continue your journey, but
on exhaust emissions moderate your speed and exercise due
caution. Have the car checked as soon
as possible.

Lights up in red:

Engine overheating Carefully bring the car to a stop, switch

Website : http://www.softlay.org
off the engine and allow it to cool down.
Do not open the bonnet, otherwise
there would be a risk of injury by scald-
ing. Contact your MINI Dealer.

Lights up in yellow:

Engine too hot Continue driving at more moderate

speed so that the engine can cool
down. Have the engine checked with-
out delay if the situation reoccurs.

Lights up in red:

Battery is no longer being charged. Switch off all unnecessary electrical con-
Alternator malfunction sumers. Have the battery checked with-
out delay.

Lights up in yellow:

Battery charge level very low, battery Have the battery checked as soon as
aged or not securely connected possible.

Indication in US models

Parking brake applied

Indication in Canadian models

Parking brake applied

132
Downloaded from www.Manualslib.com manuals search engine
 1 2 Cause What to do

Indication in US models

Lights up in red:

AT A GLANCE
Brake fluid level too low Brake pedal travel may be markedly
longer. Stop immediately. Contact the
nearest MINI Dealer.

Lights up in yellow:

Website : http://www.softlay.org
Hill Start Assist failed. The car will not be
held in place after the brake is released
Have the system checked as soon as
possible.

CONTROLS
Indication in Canadian models

Lights up in red:

Brake fluid level too low Brake pedal travel may be markedly
longer. Stop immediately. Contact the
nearest MINI Dealer.

DRIVING TIPS
Lights up in yellow:

Hill Start Assist failed. The car will not be Have the system checked as soon as
held in place after the brake is released possible.

Indication in US models

Brake pads worn Have the condition of the brake pads

checked without delay.

MOBILITY
Indication in Canadian models

Brake pads worn Have the condition of the brake pads

checked without delay.

Indication in US models

Vehicle electronics failed You cannot continue your journey. Con-

REFERENCE

tact your MINI Dealer.

133
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning lamps
1 2 Cause What to do

Indication* in Canadian models

Vehicle electronics failed You cannot continue your journey. Con-

tact your MINI Dealer.

Indication* in Canadian models

Vehicle electronics failed You cannot continue your journey. Con-

Website : http://www.softlay.org
tact your MINI Dealer.

Lights up in red: Have the system in question checked

without delay.

> Starter failed or The engine cannot be restarted.

> ignition malfunctioning. Engine
restart only possible when brake
is depressed or
> lighting system failed. Low
beams/tail lamps and brake
lamps still operational. All other
lamps failed

Lights up in yellow:

> Control of the brake lamps failed You can continue your journey, but
or moderate your speed and exercise due
> fuel supply malfunctioning caution. Have the system in question
checked without delay.

Flashing:
Dynamic Stability Control DSC or
Dynamic Traction Control DTC is con-
trolling drive and braking forces, refer
also to page 57

Dynamic Traction Control activated

(see page 58)

The dynamic stability control (DSC) and Driving stability limited during accelera-
dynamic traction control (DTC) are tion and cornering.
deactivated (see page 57) Driving style must be adjusted.

134
Downloaded from www.Manualslib.com manuals search engine
 1 2 Cause What to do

The Dynamic Stability Control DSC and Driving stability limited during accelera-
Dynamic Traction Control DTC have tion and cornering.
failed. You can continue your journey, but

AT A GLANCE
moderate your speed and exercise due
caution. Have the system checked as
soon as possible.

Indication in US models

The driving stability control systems, Reduced braking and driving stability.

Website : http://www.softlay.org
including ABS and the Tire Pressure
Monitor, have failed, refer also to
page 57
Drive cautiously and think well ahead.
Avoid braking with full force, driving on
rough tracks, and depressing the accel-

CONTROLS
erator pedal to full throttle or kick-down
position. Have the system checked
immediately.

Indication* in Canadian models

The driving stability control systems, Reduced braking and driving stability.
including ABS and the Flat Tire Monitor Drive cautiously and think well ahead.
or the Tire Pressure Monitor*, have Avoid braking with full force, driving on

DRIVING TIPS
failed, refer also to page 57 rough tracks, and depressing the accel-
erator pedal to full throttle or kick-down
position. Have the system checked
immediately.

Indication* in Canadian models

The driving stability control systems, Drive cautiously and think well ahead.
including ABS and the Flat Tire Monitor Avoid braking with full force, driving on
or the Tire Pressure Monitor*, have rough tracks, and depressing the accel-

MOBILITY
failed, refer also to page 57 erator pedal to full throttle or kick-down
position. Have the system checked
immediately.

REFERENCE

135
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning lamps
1 2 Cause What to do

Vehicles with Flat Tire Monitor*

Light up in yellow and red:

> Tire damage Carefully bring the car to a stop.

Observe the information starting on
page 60.

> Flat Tire Monitor not initialized Initialize Flat Tire Monitor, page 60.

Website : http://www.softlay.org
Light up in yellow:

Flat Tire Monitor failed. Punctures are Have the system checked.
not indicated

Vehicles with Tire Pressure Monitor*

Light up in yellow and red:

There is a flat tire or substantial loss Carefully bring the car to a stop.
in tire pressure Observe the information starting on
page 62.

Vehicles with Tire Pressure Monitor*

Light up in yellow:

Tire Pressure Monitor not initialized Initialize the Tire Pressure Monitor,
page 63.

The small lamp flashes yellow and

then stays on, the large lamp lights
up in yellow:

Tire Pressure Monitor failed. Punctures Have the system checked. Observe the
are not indicated information starting on page 63.

136
Downloaded from www.Manualslib.com manuals search engine
 1 2 Cause What to do

Lights up in red:

> Transmission limp-home pro- You can continue your journey, but

AT A GLANCE
gram active with restricted range moderate your speed and exercise due
of gears, possibly with reduced caution. Have the system checked with-
acceleration out delay.

> Gears can be engaged without Always depress the brake to engage a
depressing the brake gear.

Website : http://www.softlay.org
> Automatic selector lever locked Overriding the selector lever lock,
page 42.

Lights up in yellow: Have the system checked as soon as

CONTROLS
possible.

> Automatic selector lever locked: Overriding the selector lever lock,
Selector lever locked in position P page 42.
with engine running and brake
depressed or

> brake signal malfunctioning: gear To engage a gear while the vehicle is at
can be engaged without depress- a standstill, always depress the brake.

DRIVING TIPS
ing the brake Before leaving the vehicle, move the
selector lever to position P and switch
off the engine.

Lights up in red:

Transmission overheating Bring the car to a stop and move the

selector lever to position P. Allow the
transmission to cool down. You can
continue your journey, but moderate
your speed and exercise due caution.

MOBILITY
Have the system checked if the situa-
tion reoccurs.

Lights up in yellow:

Transmission too hot Avoid high engine loads. You can con-
tinue your journey, but moderate your
speed and exercise due caution.

Selector lever position P not engaged.

REFERENCE

Vehicle not prevented from rolling

137
Downloaded from www.Manualslib.com manuals search engine
 Indicator and warning lamps
1 2 Cause What to do

Selector lever position P not engaged. Engage selector lever position P when
Ignition cannot be switched off you wish to switch off the ignition,
page 38.

Lights up in red:

Electric steering wheel lock malfunc- The engine can no longer be started. If
tioning applicable, do not switch off the engine.
Contact your MINI Dealer.

Website : http://www.softlay.org
Lights up in yellow:

Electric steering wheel lock engaged Move the steering wheel before starting
the engine.

Cruise control system failed Have the system checked.

Park Distance Control failed Have the system checked.

Bulb of exterior lighting system failed Have the exterior lighting checked as
soon as possible.

Low-beam headlamp or fog lamp Have the lamps checked as soon as

failed possible.

High-beam headlamp failed Have the high-beam headlamps

checked.

Rear fog lamp failed Have the rear fog lamp checked.

Headlamp beam throw adjustment Have the headlamp beam throw

system failed adjustment system checked.

Coolant level too low Add coolant immediately, page 107.

Engine oil pressure too low Stop immediately and switch off the
engine. You cannot continue your jour-
ney. Contact your MINI Dealer.

138
Downloaded from www.Manualslib.com manuals search engine
 1 2 Cause What to do

Lights up in red:

Service appointment overdue Arrange a service appointment.

AT A GLANCE
Check service requirements, page 53.

Lights up in yellow:

Service due Arrange a service appointment.

Check service requirements, page 53.

No service due

Website : http://www.softlay.org

CONTROLS
Set speed limit exceeded

Time and date no longer correct Set the time and date, page 54.

DRIVING TIPS
MOBILITY
REFERENCE

139
Downloaded from www.Manualslib.com manuals search engine
 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 AT A GLANCE

Website : http://www.softlay.org
CONTROLS

DRIVING TIPS

MOBILITY

REFERENCE

REFERENCE

Downloaded from www.Manualslib.com manuals search engine

 Technical data
Technical data

In the technical data, only the values that differ from the MINI Cooper S Clubman are shown for
the MINI John Cooper Works Clubman.

Engine data

Cooper Cooper S John Cooper Works

Website : http://www.softlay.org
Displacement cu in/
cmμ
97.5/
1,598
97.5/
1,598
97.5/
1,598

Number of cylinders 4 4 4

Maximum power hp 118 172 208

output

At engine speed rpm 6,000 5,500 6,000

Maximum torque lb ft/ 114/155 177/240 192/260

with overboost Nm – 192/260 207/280

At engine speed rpm 4,250 1,600-5,000 1,850-5,600

with overboost – 1,700-4,500 2,000-5,100

Overboost briefly raises the maximum torque at high rates of acceleration, e.g. when passing.

142
Downloaded from www.Manualslib.com manuals search engine
 Dimensions

AT A GLANCE
Website : http://www.softlay.org

CONTROLS
DRIVING TIPS
All dimensions are in mm. Smallest turning circle diam.: 36 ft in/11.0 m.
Figures following the semicolons: Values that differ for the MINI Cooper S.

MOBILITY
REFERENCE

143
Downloaded from www.Manualslib.com manuals search engine
 Weights
Technical data

MINI COOPER MINI COOPER S

Curb weight, ready for travel, with all optional extras

> Manual transmission lbs/kg 2,723/1,235 2,855/1,295

> Automatic transmission lbs/kg 2,800/1,270 2,900/1,315

Approved gross weight

Website : http://www.softlay.org
> Manual transmission lbs/kg 3,539/1,605 3,671/1,665

> Automatic transmission lbs/kg 3,616/1,640 3,715/1,685

Approved front axle load

> Manual transmission lbs/kg 1,830/830 1,918/870

> Automatic transmission lbs/kg 1,907/865 1,962/890

Approved rear axle load lbs/kg 1,830/830 1,841/835

Approved roof load capacity lbs/kg 165/75 165/75

Cargo bay capacity cu ft/l 9.2/260 - 32.8/930 9.2/260 - 32.8/930

Never exceed either the approved axle loads or

the gross vehicle weight.

Capacities

US gal/US quarts Liters Notes

Fuel tank 13.2/– approx. 50 Fuel grade: page 95

including reserve of 2.1/– approx. 8

Window washer system incl. head-

lamp washer system –/4.8 approx. 4.5 For more details: page 45

144
Downloaded from www.Manualslib.com manuals search engine
 AT A GLANCE
Website : http://www.softlay.org

CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE

145
Downloaded from www.Manualslib.com manuals search engine
 From A to Z
From A to Z

INDEX
A AKI, refer to Fuel Automatic recirculated-air
specifications 95 control AUC 75
Accessories, refer to Your Alarm system 24 Automatic transmission with
individual vehicle 4 All-season tires, refer to Winter Steptronic 40
Activated-charcoal filter for tires 104 – interlock 41
automatic climate control 76 Ambient air, refer to – overriding selector lever

Website : http://www.softlay.org
Additives Recirculated-air lock 42
– coolant 107 mode 73, 75 – shiftlock 41
– engine oil 107 Ambient lighting 71 – sport program 41
Adjusting temperature inside Antenna, care 111 AUX-In, refer to External audio
the car, refer to Air Antifreeze device 79
conditioner 73 – coolant 107 Average fuel consumption 49
Adjusting temperature inside – washer fluid 45 – setting the units 51
the car, refer to Automatic Antilock Brake System ABS 58 Average speed 50
climate control 74 Anti-theft alarm system, refer Axle loads, refer to
Air conditioner 72 to Alarm system 24 Weights 144
Air conditioning mode Anti-theft system 19
– air conditioner 73 Approved axle loads, refer to B
– automatic climate control 74 Weights 144
– ventilation 76 Approved engine oils 107 Background lighting, refer to
Air distribution Approved gross vehicle Ambient lighting 71
– automatic 75 weight, refer to Weights 144 Backrests, refer to Seats 29
– individual 73 Armrest, refer to Center Backup lamps
– manual 73 armrest 79 – replacing bulb 118
Air flow rate 73, 74 Arrival time – replacing bulbs in MINI
– air conditioning system 73 – computer 50 Clubman 118
– automatic climate control 74 Ashtray 81 Band-aids, refer to First aid
– heating, ventilation 73 Assistant systems, refer to pouch 125
Air outlets, refer to Air vents 72 – Dynamic Stability Control Bar, refer to Tow-starting,
Air pressure, checking, refer to DSC 58 towing away 127
Tire inflation pressure 96 AUC Automatic recirculated- Battery 123
Air recirculation, refer to air control 75 – charging 123
Recirculated-air Audio device, external 79 – disposal 27, 123
mode 73, 75 AUTO program for automatic – jump starting 125
Air supply climate control 75 – temporary power failure 123
– air conditioner 73 Automatic Battery renewal
– automatic climate control 74 – air distribution 75 – remote control 27
– ventilation 76 – air flow rate 75 Being towed 127
Air vents 72 – cruise control 45 Belt tensioner, refer to Safety
Airbags 65 – headlamp control 67 belts 32
– sitting safely 29 Automatic climate control 72 Belts, refer to Safety belts 32
– warning lamp 66 – automatic air distribution 75 Beverage holders, refer to Cup
Airing, refer to Ventilation 76 holders 81

146
Downloaded from www.Manualslib.com manuals search engine
 Blower, refer to Air flow Car key, refer to Keys/remote Center brake lamp 119
rate 73, 74 controls 18 Center console, refer to
Bonnet 105 Car phone Around the center
Bottle holders, refer to Cup – installation location, refer to console 14
holders 81 Center armrest 79 Central locking system 19

AT A GLANCE
Brake Assist 58 – refer to separate Owner's – convenient access 25
Brake fluid, refer to Service Manual – from inside 22
requirements 53 Car wash 85 – from outside 19
Brake lamps Car wash, care 111 Changing bulbs 115
– replacing bulbs 118 Car washes 111 Changing wheels 121
Brake pads, breaking in 84 Care 111 Chassis number, refer to
Brake rotors 85 – Car washes 111 Engine compartment 106

Website : http://www.softlay.org
– brakes 84 – Car-care products 111 Check Control 55
– breaking in 84 – CD/DVD drives 114 Child's seats 35
Brake system 84 – High-pressure washers 112 Child-restraint fixing system

CONTROLS
– breaking in 84 – internal 113 LATCH 36
– disc brakes 85 – Leather 113 Child-restraint systems 35
– MINI Maintenance – Manual washing 112 Chrome parts, care 112
System 109 – Upholstery and fabrics 113 Chrome parts, refer to
Brakes – Windows 112 Care 111
– ABS 58 – Wiper blades 112 Cigarette lighter 81
– breaking in 84 Cargo area Cleaning headlamps 44
– MINI Maintenance – capacity 144 – washer fluid 45
System 109 Cargo area partition net, refer Clock 48

DRIVING TIPS
– parking brake 40 to Partition net in MINI – 12h/24h mode 51
– service requirements 53 Clubman 87 – setting time 54
Brakes, refer to Braking Cargo bay 86 Closing
safely 85 – convenient access 26 – from inside 22
Breakdown service, refer to – cover 86 – from outside 19
Roadside Assistance 125 – doors, refer to Splitdoor 23 Clothes hooks 80
Break-in period 84 – lamp 70 Clubdoor 23
Breaking in the clutch 84 – opening from outside 23 Cockpit 10
Bulb changing, refer to Lamps – trunk lid, refer to Splitdoor 23 Cold start, refer to Starting the
and bulbs 115 Cargo bay doors, refer to engine 39

MOBILITY
Button for starting the Splitdoor 23 Comfort access
engine 38 Cargo bay, expanding 86 – what to observe before
Buttons on the steering Cargo bay lamp 70 entering a car wash 26
wheel 11 Cargo bay partition net, refer Comfort access, refer to
to Partition net in MINI Convenient access 25
C Clubman 87 Comfort area, refer to Around
Cargo loading 88 the center console 14
California Proposition 65 – securing cargo 89 Compartment for remote
warning 5 – stowing cargo 88 control, refer to Ignition
Can holders, refer to Cup – vehicle 86 lock 38
REFERENCE

holders 81 Cargo, securing 89 Computer 49

Capacities 144 Carpets, care 113 Condensation, refer to When
Car battery, refer to Vehicle Catalytic converter, refer to the vehicle is parked 85
battery 123 Hot exhaust system 84 Condition Based Service
Car care 111 Center armrest 79 CBS 109

147
Downloaded from www.Manualslib.com manuals search engine
 Configuring settings, refer to DBC Dynamic Brake Control, Doors, manual operation 22
From A to Z
Personal Profile 18 refer to Brake assist 58 DOT Quality Grades 101
Confirmation signals for Deactivating front passenger Double doors, refer to
vehicle locking/unlocking 20 airbags 65 Splitdoor 23
Connecting vacuum cleaner, Deadlocking, refer to Drinks holders, refer to Cup
refer to Connecting electrical Locking 20 holders 81
appliances 81 Defect Drive-off assistant, refer to Hill
Consumption indicator – door lock 22 Start Assist 59
– average fuel consumption 49 – fuel filler door 94 Driving dynamics control, refer
Consumption, refer to Average Defogging windows 74, 76 to Sport button 60
fuel consumption 49 Defrost position, refer to Driving lamps, refer to Parking
Control Display Defrosting windows 74, 76 lamps/low beams 67

Website : http://www.softlay.org
– settings 50 Defrosting windows 74, 76 Driving notes 84
Controls and displays 10 Defrosting windows and Driving off on inclines, refer to
Convenience start, refer to removing condensation Hill Start Assist 59
Starting the engine 39 – air conditioner 74 Driving through water 85
Convenient access 25 – automatic climate control 76 Driving tips, refer to Driving
– replacing the battery 27 Differential, breaking in 84 notes 84
Convenient operation Digital clock 48 Dry air, refer to Cooling
– windows 20 Dimensions 143 function 76
Coolant 107 Dipstick, engine oil 106 DTC Dynamic Traction Control
– checking level 107 Directional indicators, refer to DTC 58
– filling 107 Turn signals 42 Dynamic Brake Control DBC,
Coolant temperature 48 Displacement, refer to Engine refer to Brake assist 58
Cooling fluid, refer to data 142 Dynamic Stability Control
Coolant 107 Display lighting, refer to DSC 58
Cooling, maximum 75 Instrument lighting 70 Dynamic Traction Control 58
Copyright 2 Displays 12
Cruising range 49 – instrument combination 12 E
Cup holders 81 Displays and controls 10
Curb weight, refer to Displays, care 114 Electrical malfunction
Weights 144 Disposal – door lock 22
Current fuel consumption 50 – of coolant 107 – fuel filler door 94
– remote control battery 27 Electronic brake-force
D – vehicle battery 123 distribution 58
Distance remaining to service, Electronic Stability Program
Dashboard instruments, refer refer to Service ESP, refer to Dynamic
to Displays 12 requirements 53 Stability Control DSC 58
Dashboard lighting, refer to Distance warning, refer to Park Emergency operation, refer to
Instrument lighting 70 Distance Control PDC 57 Manual operation
Dashboard, refer to Cockpit 10 Diving stability control – door lock 22
Data 142 systems 57 – fuel filler door 94
– capacities 144 Door – transmission lock, automatic
– dimensions 143 – rear, refer to Clubdoor 23 transmission 42
– engine 142 Door key, refer to Integrated Emergency services, refer to
– weights 144 key/remote control 18 Roadside Assistance 125
Date Door lock 22
– setting 55 Door lock, confirmation
Daytime running lamps 68 signals 20

148
Downloaded from www.Manualslib.com manuals search engine
 Engine Eyes Front airbags 65
– breaking in 84 – for tow-starting and towing Front fog lamps 70
– data 142 away 126 – indicator lamp 129
– overheated, refer to Coolant – for tying down loads 89 – replacing bulb 117
temperature 48 Front seat adjustment 29

AT A GLANCE
– speed 142 F Frost on windows, refer to
– starting 39 Defrosting windows 74, 76
– starting, convenient Failure messages, refer to FTM, refer to Flat Tire
access 25 Check Control 55 Monitor 60
– switching off 39 Failure of an electrical Fuel 95
Engine compartment 106 consumer 123 – gauge 49
Engine coolant, refer to Fasten safety belts reminder, – high-quality brands 95

Website : http://www.softlay.org
Coolant 107 refer to Seat belt – quality 95
Engine oil reminder 32 – specifications 95
– adding 107 Fastening safety belts, refer to – tank capacity 144

CONTROLS
– additives, refer to Approved Safety belts 32 Fuel clock, refer to Fuel
engine oils 107 Filter gauge 49
– approved engine oils 107 – microfilter for air Fuel display, refer to Fuel
– capacity 107 conditioner 74 gauge 49
– checking level 106 – microfilter/activated- Fuel filler door 94
– dipstick 106 charcoal filter for automatic – releasing in the event of
– intervals between changes, climate control 76 electrical malfunction 94
refer to Service Fine wood, care 113 Fuses 123
requirements 53 First aid pouch 125

DRIVING TIPS
– MINI Maintenance Fixture for remote control, G
System 109 refer to Ignition lock 38
Engine oil level, checking 106 Flash when locking/ Garage door opener, refer to
Engine output, refer to Engine unlocking 20 Integrated universal remote
data 142 Flat tire control 77
Engine starting, refer to – Run-Flat Tires 103 Gasoline
Starting the engine 39 – Tire Pressure Monitor TPM 62 – refer to Average
Error messages, refer to Check Flat Tire Monitor FTM 60 consumption 49
Control 55 – indicating a flat tire 61 Gasoline display, refer to Fuel
ESP Electronic Stability – initializing the system 60 gauge 49

MOBILITY
Program, refer to Dynamic – malfunction 61 Gasoline, refer to Required
Stability Control DSC 58 – snow chains 60 fuel 95
Event data recorders 110 – system limits 60 Gear indicator
Exhaust system, refer to Hot Flat tires, refer to Tire – automatic transmission with
exhaust system 84 condition 102 Steptronic 40
Exterior mirrors 33 Floor mats, care 113 Gear shifting
– adjusting 33 Floor plate, see Level load – automatic transmission 41
– automatic heating 33 floor 87 – manual transmission 40
– folding in and out 33 Fog lamps Gearshift lever
External audio device 79 – replacing bulb 117, 119 – automatic transmission with
REFERENCE

External care Folding rear seat backrest 86 Steptronic 41

– 111 Footbrake, refer to Braking – manual transmission 40
safely 85 General driving notes 84
Footwell lamps 70
For your own safety 4

149
Downloaded from www.Manualslib.com manuals search engine
 Glass sunroof, electric 27 Hill Start Assist 59 Interior lamps 70
From A to Z
– convenient operation 20, 22 Hills 85 – remote control 21
– opening, closing 27 Holders for cups 81 Interior rearview mirror 33
– raising 27 Homepage 4 – automatic dimming
– remote control 20 Horn 10 feature 33
Glove compartment 78 Hot exhaust system 84 Interlock 41
Grills, refer to Air vents 72 Hydroplaning 84 Intermittent mode of the
Gross vehicle weight, refer to wipers 43
Weights 144 I Internet page 4

H Ice warning 48 J
Icy roads, refer to Outside

Website : http://www.softlay.org
Halogen lamps temperature warning 48 Jacking points 122
– replacing bulb 116 Ignition 38 Jets, refer to Window washer
Handbrake, refer to Parking – switched off 39 nozzles 45
brake 40 – switched on 38 Jump starting 125
Hands-free system 14 Ignition key position 1, refer to Jumpering, refer to Jump
Hazard warning flashers 14 Radio readiness 38 starting 125
Head airbags 65 Ignition key position 2, refer to
Head restraints 31 Ignition on 38 K
– sitting safely 29 Ignition key, refer to
Headlamp control, Integrated key/remote Key Memory, refer to Personal
automatic 67 control 18 Profile 18
Headlamp flasher 42 Ignition lock 38 Key, refer to Keys/remote
– indicator lamp 11, 129 Imprint 2 controls 18
Headlamps Indicator and warning Keyless go, refer to Convenient
– replacing bulb 116 lamps 13, 129 access 25
Headlamps, care 112 – Tire Pressure Monitor TPM 63 Keyless opening and closing,
Heated Indicator lighting, refer to refer to Convenient
– mirrors 33 Instrument lighting 70 access 25
– rear window 73, 75 Individual air distribution 73 Kick-down 41
– seats 32 Individual settings, refer to – automatic transmission with
Heating 72 Personal Profile 18 Steptronic 41
– mirrors 33 Inflation pressure monitoring, Knock control 95
– rear window 73, 75 refer to Tire Pressure Monitor
– seats 32 TPM 62 L
Heavy loads, refer to Stowing Initializing
cargo 88 – Flat Tire Monitor FTM 60 Lamps and bulbs, replacing
Height adjustment – glass sunroof, electric 28 bulbs 115
– seats 30 Instrument cluster, refer to Lamps, refer to Parking lamps/
– steering wheel 34 Displays 12 Low beams 67
Height, refer to Instrument lighting 70 Lashing eyes, refer to Securing
Dimensions 143 Instrument panel, refer to cargo 89
High beams 69 Cockpit 10 LATCH child-restraint fixing
– headlamp flasher 69 Instrument panel, refer to system 36
– indicator lamp 129 Displays 12 Leather care 113
– replacing bulb 116 Integrated key 18 LEDs light-emitting diodes 116
High water, refer to Driving Integrated universal remove Length, refer to
through water 85 control 77 Dimensions 143

150
Downloaded from www.Manualslib.com manuals search engine
 Level load floor 87 Malfunction warnings, refer to Modifications, technical, refer
License plate lamp Check Control 55 to For your own safety 4
– replacing bulbs in MINI Manual air distribution 73 Monitoring system for tire
Clubman 119 Manual mode pressures, refer to Flat Tire
Light switch 67 – automatic transmission with Monitor 60

AT A GLANCE
Light-alloy wheels, care 113 Steptronic 41 Multifunction switch
Light-emitting diodes Manual operation – refer to Turn signals/
LEDs 116 – door lock 22 headlamp flasher 42
Lighter 81 – fuel filler door 94 – refer to Wiper system 43
– socket 81 – transmission lock, automatic Multifunctional steering
Lighting transmission 42 wheel, refer to Buttons on
– lamps and bulbs 115 Manual transmission 40 the steering wheel 11

Website : http://www.softlay.org
– of the instruments 70 Manual washing 112
N
– of vehicle, refer to Lamps 67 Master key, refer to Integrated
Limit 139 key/remote control 18

CONTROLS
Load 88 Maximum cooling 75 Neck support, refer to Head
Load securing equipment, Maximum speed restraints 31
refer to Securing cargo 89 – with winter tires 104 Nets, refer to Storage
Lock buttons of doors, refer to Medical assistance, refer to compartments 80
Locking 22 First aid pouch 125 New tires 103
Locking Microfilter Number of cylinders, refer to
– adjusting confirmation – for air conditioner 74 Engine data 142
signal 20 – for automatic climate Nylon rope, refer to Tow
– from inside 22 control 76 rope 127

DRIVING TIPS
– from outside 20 – MINI Maintenance
– without remote control, refer System 109 O
to Convenient access 25 Microfilter/activated-charcoal
Locking and unlocking doors filter OBD socket, refer to Socket for
– confirmation signals 20 – MINI Maintenance Onboard Diagnosis 109
– from inside 22 System 109 Octane ratings, refer to Fuel
– from outside 19 Microphone for telephone 14 specifications 95
Low beams 67 MINI Internet page 4 Odometer 48
– automatic 67 MINI Maintenance System 109 Oil consumption 106
– replacing bulb 116 Mirror dimming feature 33 Oil level 106

MOBILITY
Lower back support, refer to Mirrors 33 Oil, refer to Engine oil 106
Lumbar support 30 – exterior mirrors 33 Old batteries, refer to
Luggage compartment doors, – heating 33 Disposal 123
refer to Splitdoor 23 – interior rearview mirror 33 Onboard tool kit 115
Luggage rack, refer to Roof- Mobile phone Opening and closing
mounted luggage rack 89 – installation location, refer to – convenient access 25
Lumbar support 30 Center armrest 79 – from inside 22
– refer to separate Owner's – from outside 19
M Manual – using the door lock 22
Mobile phone, installation – via the remote control 19
REFERENCE

M+S tires, refer to Winter location, refer to Center Opening and unlocking
tires 104 armrest 79 – from inside 22
Maintenance, refer to Service Mobile phone, refer to the Opening/closing the splitdoor
Booklet separate Owner's Manual – 23
Maintenance system 109 Mobility System 119

151
Downloaded from www.Manualslib.com manuals search engine
 Outlets Pressure monitoring, tires 60 Remote control 18
From A to Z
– refer to Ventilation 76 – Flat Tire Monitor 60 – battery renewal 27
Outlets, refer to Air vents 72 Pressure, tires 96 – convenient access 25
Output, refer to Engine Protective function, refer to – garage door opener 77
data 142 Pinch protection system – malfunctions 21, 27
Outside temperature – windows 28 – service data 109
display 48 Puncture – Splitdoor 21
– changing unit of measure 51 – Flat Tire Monitor 60 Replacement remote
– on onboard computer 51 control 18
Outside-air mode R Replacing bulbs, refer to
– automatic climate control 75 Lamps and bulbs 115
Overheated engine, refer to Radio key, refer to Integrated Replacing tires, refer to New

Website : http://www.softlay.org
Coolant temperature 48 key/remote control 18 wheels and tires 103
Radio position, refer to Radio Reporting safety defects 6
P readiness 38 Reserve warning, refer to Fuel
Radio readiness 38 gauge 49
Paintwork, care 112 – switched off 39 Reservoir for washer
Park Distance Control PDC 57 – switched on 38 systems 45
Parking Rain sensor 43 Restraint systems
– vehicle 39 Range, refer to Cruising – for children 35
Parking aid, refer to Park range 49 – refer to Safety belts 32
Distance Control PDC 57 Reading lamps 70 Reverse gear
Parking brake 40 Rear door, refer to – automatic transmission with
Parking lamps, replacing Clubdoor 23 Steptronic 41
bulb 117 Rear doors, refer to – manual transmission 40
Parking lamps/low beams 67 Splitdoor 23 Roadside Assistance 125
Partition net in MINI Rear double doors, refer to Roadside parking lamps 69
Clubman 87 Splitdoor 23 – replacing bulb 117
Parts and accessories, refer to Rear fog lamp 70 Roadworthiness test, refer to
Your individual vehicle 4 – indicator lamp 129 Service requirements 53
Pathway lighting 67 – replacing bulb 119 Roof load capacity 144
Personal Profile 18 Rear lamps, refer to Tail Roof-mounted luggage
Pinch protection system lamps 118 rack 89
– windows 28 Rear seat backrest, folding 86 Rope, refer to Tow-starting,
Plastic parts, care 113 Rear seats towing away 127
Pollen – folding the backrests 86 RSC Runflat System
– refer to Microfilter for air Rear window heating 73, 75 Component, refer to Run-
conditioner 74 Rearview mirror, refer to Flat Tires 103
– refer to Microfilter/activated- Mirrors 33 Rubber parts, care 112
charcoal filter for automatic Recirculated-air mode 73, 75 Runflat System Component
climate control 76 Recirculation of air, refer to RSC, refer to Run-Flat
Power failure 123 Recirculated-air Tires 103
Power windows 28 mode 73, 75 Run-Flat Tires 103
Power windows, refer to Reclining seat, refer to – flat tire 61
Windows 28 Backrest 30 – new tires 103
Pressure monitoring of tires, Refueling 94 – tire inflation pressure 96
refer to Tire Pressure Monitor Releasing – winter tires 104
TPM 62 – bonnet 105 Runflat Tyres, refer to Run-Flat
Tires 103

152
Downloaded from www.Manualslib.com manuals search engine
 S Service requirement display, Speed 142
refer to Condition Based – with winter tires 104
Safety belts 32 Service CBS 109 Speed control, refer to Cruise
– damage 32 Service requirements 53 control 45
– indicator lamp 32 Settings Speedometer 12

AT A GLANCE
– reminder 32 – clock, 12h/24h mode 51 Split rear seat backrest, refer to
– sitting safely 29 Shifting gears Expanding the cargo bay 86
Safety belts, care 113 – automatic transmission with Splitdoor 23
Safety systems Steptronic 41 – opening from outside 23
– airbags 65 – manual transmission 40 – unlocking with remote
– Antilock Brake System Shiftlock control 21
ABS 58 – automatic transmission, refer Sport button 60

Website : http://www.softlay.org
– Dynamic Stability Control to Changing selector lever Stability control, refer to
DSC 58 positions 41 Driving stability control
– safety belts 32 Side airbags 65 systems 57

CONTROLS
Safety tires, refer to Run-Flat Side door, rear, refer to Start/stop button 38
Tires 103 Clubdoor 23 – starting the engine 39
Screw thread for tow Side turn signal indicator – switching off the engine 39
fitting 126 – replacing bulb 118 Starting assistance, refer to
Seat adjustment Side windows, refer to Jump starting 125
– mechanical 30 Windows 28 Starting, refer to Starting the
Seats 29 Signal horn, refer to Horn 10 engine 39
– adjusting the seats 30 Sitting safely 29 Starting the engine
– heating 32 – airbags 29 – start/stop button 38

DRIVING TIPS
– sitting safely 29 – safety belts 29 Start-off assistance, refer to
Securing the vehicle – with head restraint 29 – DSC 58
– from inside 22 Size, refer to Dimensions 143 – Hill Start Assist 59
– from outside 19 Sliding/tilt sunroof Status of this Owner's Manual
Selector lever – refer to Glass sunroof, at time of printing 4
– automatic transmission with electric 27 Steering wheel 34
Steptronic 41 Slot for remote control 38 – adjustment 34
Selector lever lock Smokers' package, refer to – buttons on steering wheel 11
– automatic transmission with Ashtray 81 – lock 38
Steptronic, refer to Snap-in adapter, refer to – shift paddles 41

MOBILITY
Shiftlock 41 Center armrest storage Steptronic, refer to Automatic
– overriding manually 42 compartment 79 transmission with
Selector lever positions Snow chains 104 Steptronic 40
– automatic transmission with Socket for Onboard Diagnosis Storage area
Steptronic 41 OBD 109 – cargo bay 86
Service car, refer to Roadside Socket, refer to Connecting Storage compartment, front
Assistance 125 electrical appliances 81 passenger side 80
Service data in the remote Space-saver spare tire Storage compartments 80
control 109 – changing tires 121 Storage space
Service Interval Display, refer – inflation pressure 96 – storage compartments 80
REFERENCE

to Condition Based Service Spare wheel, refer to Space- Storing the vehicle 114
CBS 109 saver spare tire 121 Storing tires 104
Service, refer to Roadside Special oils, refer to Approved Stowage, refer to Storage
Assistance 125 engine oils 107 compartments 80

153
Downloaded from www.Manualslib.com manuals search engine
 Summer tires, refer to Wheels Three-point safety belt 32 Tires with safety features, refer
From A to Z
and tires 96 Tightening the lug bolts to Run-Flat Tires 103
Switches, refer to Cockpit 10 – keys 121 Tools, refer to Onboard tool
Switching off – torque 123 kit 115
– engine 39 Tightening torque, refer to Torque 142
Switching off the engine Tightening the lug bolts 123 – lug bolts 123
– start/stop button 38 Tire change set Tow bar 127
Switching the cooling function – MINI Mobility System 121 Tow fitting 126
on and off 76 – space-saver spare tire 121 – screw thread 126
Symbols 4 Tire failure Tow fittings for tow-starting
– Flat Tire Monitor 61 and towing away 126
T – indicator/warning lamp 61 Tow rope 127

Website : http://www.softlay.org
– MINI Mobility System 119 Towing 126
Tachometer 48 – Run-Flat Tires 61 – car with automatic
Tail lamp, refer to Tail – space-saver spare tire 121 transmission 127
lamps 118 – Tire Pressure Monitor 62 – methods 127
– replacing bulb 118 Tire inflation pressure 96 Tow-starting 126
Tail lamps 118 – loss 61 TPM, refer to Tire Pressure
– replacing bulbs in MINI – space-saver spare tire 96 Monitor 62
Clubman 118 Tire Pressure Monitor TPM 62 Track width, refer to
Tailgate – limitations of system 62 Dimension 143
– convenient access 26 – resetting system 62 Traction control, refer to
Tailgate, see splitdoor 21 – warning lamp 63 – Dynamic Stability Control
Tank volume, refer to Tire pressure monitoring, refer DSC 58
Capacities 144 to Flat Tire Monitor 60 Transmission
Technical data 142 Tire Quality Grading 101 – automatic transmission with
Technical modifications 4 Tires Steptronic 40
Telephone – age 102 – manual transmission 40
– installation location, refer to – breaking in 84 – overriding selector lever lock
Center armrest 79 – changing, refer to Changing for automatic transmission
– refer to separate Owner's wheels 121 with Steptronic 42
Manual – condition 102 Transport securing devices,
Telephone call, refer to the – damage 102 refer to Securing cargo 89
Owner's Manual for the – inflation pressure 96 Transporting children safely 35
telephone – inflation pressure loss 63 Tread depth, refer to Minimum
Temperature display – minimum tread depth 102 tire tread 102
– ice warning 48 – new tires 103 Trip odometer 48
– outside temperature 48 – pressure monitoring, refer to Trip-distance counter, refer to
– setting the units 51 Flat Tire Monitor 60 Trip odometer 48
Temperature of coolant, refer – pressure monitoring, refer to Triple turn signal activation 42
to Coolant temperature 48 Tire Pressure Monitor Turn signal indicator 42
Temperature setting TPM 62 – front, replacing bulb 117
– air conditioner 73 – puncture 61 – indicator lamp 12
– automatic climate control 75 – Run-Flat Tires 103 – rear, replacing bulb 118
Tensioning straps, refer to – size 101 – side, replacing bulb 118
Securing cargo 89 – wear indicators, refer to Turning circle, refer to
The individual vehicle 4 Minimum tread depth 102 Dimensions 143
Third brake lamp, refer to – winter tires 104 Tying down loads, refer to
Center brake lamp 119 Cargo loading 89

154
Downloaded from www.Manualslib.com manuals search engine
 U Washer fluid 45 Work in the engine
– capacity of reservoir 45 compartment 105
Uniform Tire Quality Grading Washer fluid reservoir 45 Wrench/screwdriver, refer to
UTQR 101 Waste tray, refer to Ashtray 81 Onboard tool kit 115
Units Water on roads, refer to

AT A GLANCE
– average fuel consumption 51 Driving through water 85 X
– temperature 51 Waterfall lighting, refer to
Universal garage door opener, Ambient lighting 71 Xenon lamps
refer to Integrated universal Wear indicators in tires, refer to – replacing bulb 116
remote control 77 Minimum tread depth 102
Universal remove control 77 Weights 144
Unlatching, refer to Welcome lamps 67

Website : http://www.softlay.org
Unlocking 26 Wheel stud wrench
Unlocking – space-saver spare tire 121
– from inside 22 Wheelbase, refer to

CONTROLS
– from outside 19 Dimensions 143
– tailgate 26 Wheels and tires 96
– without remote control, refer Wheels, new 103
to Convenient access 25 Width, refer to
Upholstery, care 113 Dimensions 143
USB-audio interface 79 Window washer, refer to
Washer fluid 45
V Window washer reservoir,
refer to Washer fluid

DRIVING TIPS
Vehicle – volume, refer to
– battery 123 Capacities 144
– breaking in 84 Windows 28
– cargo loading 86 – closing 28
– dimensions 143 – convenient operation 20
– Identification Number, refer – opening 28
to Engine compartment 106 – pinch protection system 28
– parking 39 Windshield
– storage 114 – cleaning 44
– weight 144 – defrosting and removing

MOBILITY
Vehicle jack 121 condensation 74, 76
– jacking points 122 Windshield, defrosting, refer to
Ventilation Defrosting windows 74, 76
– air conditioner 76 Windshield washer system 43
Vents, refer to Air vents 72 – washer fluid 45
Vents, refer to Ventilation 76 – washer nozzles 45
Volume of cargo area 144 Windshield wiper blades,
changing 115
W Windshield wipers, refer to
Wiper system 43
REFERENCE

Warning and indicator Winter tires 104

lamps 13, 129 – storage 104
Warning messages, refer to Wiper blade replacement 115
Check Control 55 Wiper system 43
Warning triangle 125

155
Downloaded from www.Manualslib.com manuals search engine
 From A to Z

Website : http://www.softlay.org

156
Downloaded from www.Manualslib.com manuals search engine
 Website : http://www.softlay.org

Downloaded from www.Manualslib.com manuals search engine

 *BL260101700H*

Website : http://www.softlay.org

01 41 2 601 017 ue Basis

DRIVE ME.
Downloaded from www.Manualslib.com manuals search engine