8 7 6 5 4 3 2 1
REVISIONS
NOTES: 323 ZONE REV ECN DESCRIPTION DATE DRAWN APPROVED
[12.7] A 1410803 ORIGINAL RELEASE 2020OCT08 SUJIN J.JAKOP
1. INSTALL THE DRYER ON A CLEAN AREA THAT HAS GOOD AIRFLOW. 170 332 B 1518929 PLC UPDATED TO TOUCH SCREEN PLC 2024AUG05 S.NAVEEN Z.ANDREJ
THE INSTALLATION SURFACE MUST BE HARD AND FLAT. [6.7] [13.1] DIM 323 WAS 326,170 WAS 174
2. MAKE SURE THAT THE PRODUCT IS POSITIONED SECURELY AND
ON A STABLE BASE. ANY RISK OF MOVEMENT SHOULD BE REMOVED FILTER OUTLET - 1" BSPT
BY SUITABLE MEANS TO AVOID STRAIN ON CONNECTED PIPING. DRYER OUTLET - 1" BSPP CONTROL
3. GIVE A MINIMUM OF 500mm SPACE ALL AROUND THE PANEL
DRYER FOR NORMAL OPERATION AND MAINTENANCE. AIR FLOW
D D
TECHNICAL NOTES:
1. MINIMUM WORKING PRESSURE: 4 BARG
2. MAXIMUM WORKING PRESSURE: 14 BARG
3. MINIMUM AMBIENT TEMPERATURE: 10 C
4. MAXIMUM AMBIENT TEMPERATURE: 46 C
5. VOLTAGE: 230 V, 1 PHASE, 50 - 60 Hz
6. FILTERS: CF025L1"C & CF025L1"B (SUPPLIED & SHIPPED LOOSE)
7. IP 54
316
[12.44]
CONNECTION
1873 CCN MODEL CAPACITY WEIGHT
TYPE
[73.8] (WITHOUT
DRYER FILTER m3/h
C (1742 ) FILTER)
C
[68.6] 47700809001 AX25M -40 C BSPP BSPT 150 86 kg
SUITABLE INLET & 47700817001 AX25M -40 C DS BSPP BSPT 150 86 kg
OUTLET PIPING 47700825001 AX25M -70 C BSPP BSPT 120 86 kg
IN CUSTOMER SCOPE
FILTER INLET - 1" BSPT
DRYER INLET - 1" BSPP
AIR FLOW
(236 )
[9.3] NOTE:
A 2m LONG CABLE
REF
B B
X (243 )
[9.6] SEE DETAIL A
ALLOW EXTRA HEIGHT
TO SUIT DRAIN AND 10
TUBING ARRANGEMENT [.4]
NOTE: A MINIMUM DISTANCE (X) OF 38mm (1.5")
IS REQUIRED BELOW THE FILTER TO 365 270
ALLOW FOR SERVICING [14.4] [10.6]
15
[.6]
NOTE: IT IS RECOMMENDED THAT A MINIMUM DISTANCE DETAIL A
397 SCALE 1.000
OF 1/2 m ALL AROUND THE MACHINE SHOULD BE [15.6] MOUNTING HOLES
KEPT VACANT FOR ACCESSING THE MACHINE FOR (AT 4 PLACES)
SERVICE 477
A
THESE VIEWS ARE SHOWN FOR [18.8]
A
REFERENCE ONLY STANDARD TOLERANCES WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED
BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS
DO NOT SCALE DRAWING
DRAWING CONFORMS TO
AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS.
ALL DIMENSIONS ARE IN ASME Y14.5M - 1994
THIRD ANGLE PROJECTION
SCALE 0.125 MILLIMETERS PROPRIETARY NOTICE DRAWN DATE
[INCHES (IF SHOWN)] THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET CAD GENERATED DRAWING, SUJIN 2020OCT08
INFORMATION, IS THE PROPERTY OF COMPAIR, AND IS NO MANUAL REVISIONS ALLOWED CHECKED DATE NAME
UNSPECIFIED TOLERANCES: GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION
AX25M, HEATLESS DRYER
P.BLAZ 2020OCT08
AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE UNLESS OTHERWISE SPECIFIED:
AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY APPROVED DATE
- REMOVE ALL BURRS AND SHARP CORNERS
COMPAIR. IT WILL (1) NOT USE THE DRAWING OR ANY COPY - WELD SYMBOLS TO BE IN ACCORDANCE J.JAKOP 2020OCT08
WHOLE : 3 THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION
ONE PLACE (.X) : 0.5 WITH ANSI/AWS A2.4 DRAWING TYPE
AX25M, HEATLESS DRYER
THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS SIZE ESTIMATED WEIGHT PART NO. REVISION
TWO PLACE (.XX) : 0.25 Detail Drawing
A1 47712540001 B
EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET (KG UNLESS OTHERWISE SPECIFIED)
ANGLES (.X) : 1 INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO COPYRIGHT @ 2020 NOMENCLATURE
RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL CompAir 0.0 kilogram mdl.param.value
Ingersoll-Rand Industrial Technologies
COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM. ALL RIGHTS RESERVED SCALE
0.18 MODEL 1 OF 1
For Internal Use : Model = 47712540001 | ASSEM | B.2 | Gokulavanan Ravichandran | 05-Aug-24 04:46:08 PM | Open Drawing = 47712540001 | DRAW | B.5 | Gokulavanan Ravichandran | 14-Aug-24 09:57:38 AM | Open
8 7 6 5 4 3 2
UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED B.5
