Piping Material Specification

01CB325 Rev: 2.0, Date: Sep 2016

SERVICE: Hydrocarbon (w/H2) (Note 223) MATERIAL: Carbon Steel - Killed

RATING: Class 150, ASME B16.5 DESIGN CODE: ASME B31.3

TEMPERATURE LIMIT: -20°F to 650°F X-RAY: 5% Random

CORROSION ALLOWANCE: 0.125 inch STRESS Per ASME B31.3

RELIEF:

PRESSURE - TEMPERATURE RATINGS (For NPS 1/2 through NPS 54)

TEMP °F -20 to 100 200 300 400 500 600 650
PSIG 285 260 230 200 170 140 125

(Full flange ratings per latest approved editions of ASME B16.5 and ASME B16.47)

HYDROGEN PARTIAL PRESSURE

TEMP °F 530 570 650
PSIA 285 200 100

ITEM NOTES NPS Range SCH / RAT ENDS DESCRIPTION MDMT/CODE

PIPE Start End
154,
246
180 ½" 2" 80 PE CS, SMLS, ASTM A106 Gr B -20°F

118 3" 24" STD BE CS, SMLS, ASTM A106 Gr B -20°F

133 26" 56" CALC BE CS, DSAW, ASTM A672 Gr. C60 CALC

26" 56" CALC BE CS, DSAW, API 5L Gr B CALC

NIPPLES Start End

Pipe 180 ½" 2" 80 PBE CS, SMLS, ASTM A106 Gr B

Swage 180 ½" 2" 80 PBE CS, SMLS, ASTM A106 Gr B

FITTINGS Start End

BW Cap 3" 36" Match Pipe BW CS, ASTM A234 WPB

BW Conc Red 3" 36" Match Pipe BW CS, ASTM A234 WPB

BW Ecc Red 3" 36" Match Pipe BW CS, ASTM A234 WPB

BW LR 45 Ell 3" 36" Match Pipe BW CS, ASTM A234 WPB

BW LR 90 Ell 3" 36" Match Pipe BW CS, ASTM A234 WPB

BW Red Tee 3" 36" Match Pipe BW CS, ASTM A234 WPB

BW Tee 3" 36" Match Pipe BW CS, ASTM A234 WPB

Plug ½" 1½" THRD CS, A105, Solid Bar Stock Long Style

Sockolet 1½" 2" 3000 SW CS, ASTM A105

SW 90 Ell ½" 2" 3000 SW CS, ASTM A105

SW Cap ½" 2" 3000 SW CS, ASTM A105

SW Full Coupling ½" 2" 3000 SW CS, ASTM A105

SW Red Tee ½" 1½" 3000 SW CS, ASTM A105

SW Tee ½" 2" 3000 SW CS, ASTM A105

Union ½" 2" Use Flanges

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 1 of 7
affiliates without express, prior, written permission.
 Piping Material Specification
01CB325 Rev: 2.0, Date: Sep 2016

ITEM NOTES NPS Range SCH / RAT ENDS DESCRIPTION MDMT/CODE

FITTINGS Start End
Weldolet 3" 6" STD BW CS, ASTM A105

VALVES Start End

Ball Flg: Qtr Turn 260 1" 14" Class 150 RF CS, Forged or Cast, Reduced Port, Floating (-20°F VB-013
to 500°F)

Ball Flg: Qtr Turn 260 1" 24" Class 150 RF CS, Forged or Cast, Full Port, Floating (-20°F to VB-013F
500°F)

Ball Flg: Qtr Turn 109 1½" 56" Class 150 RF CS, Forged or Cast, Full Port, Double Block and VB-014FY
Bleed, Trunnion (-20°F to 500°F)

Ball Flg: Qtr Turn 260 1½" 56" Class 150 RF CS, Forged, ASTM A350 LF2, Full Port, Trunnion (- VB-015F
20°F to 375°F)

Ball Flg: Qtr Turn 109 2" 56" Class 150 RF CS, Forged or Cast, Reduced Port, Double Block VB-014Y
and Bleed, Trunnion (-20°F to 500°F)

Ball Flg: Qtr Turn 260 3" 42" Class 150 RF CS, Forged, ASTM A350 LF2, Reduced Port, VB-015
Trunnion (-20°F to 375°F)

Ball Flg: Rising Stem 1" 24" Class 150 RF CS, Cast, ASTM A216 WCC, Full Port (451°F to VB-0128F
800°F)

Ball Flg: Rising Stem 1" 24" Class 150 RF CS, Cast, ASTM A216 WCC, Full Port (-20°F to VB-012F
450°F)

Ball Flg: Rising Stem 2" 30" Class 150 RF CS, Cast, ASTM A216 WCC, Reduced Port (-20°F VB-012
to 450°F)

Ball Flg: Rising Stem 2" 30" Class 150 RF CS, Cast, ASTM A216 WCC, Reduced Port (451°F VB-0128
to 800°F)

Ball Flg: Special 133 1" 10" Class 150 RF CS, Cast, ASTM A216 WCB, Reduced Port (Max VB-017
400°F)

Butterfly Flg 3" 56" Class 150 RF CS, Cast, ASTM A216 WCB or WCC, Metal to Metal VF-014DF
Seat, Double-flanged

Butterfly Flg 3" 56" Class 150 RF CS, Cast, ASTM A216 WCB or WCC , Metal to VF-014LU
Metal Seat, Lug-type

Butterfly Flg: Special 133 3" 56" Class 150 RF CS, Cast, ASTM A216 WCB, Double-flanged, (-20° VF-015DF
F to 450° F)

Butterfly Flg: Special 133 3" 56" Class 150 RF CS, Cast, ASTM A216 WCB, Lug-type, (-20° F to VF-015LU
450° F)

Check Flg ½" 2" Class 150 RF CS, Forged, ASTM A105, Piston Check, Spring VCP-011
Loaded

Check Flg 2" 36" Class 150 RF CS, Cast, ASTM A216 WCB, Swing Check VC-012

Check Flg 74, 133 2" 36" Class 300 RF CS, Cast, ASTM A216 WCB, Piston Check, Spring VCP-032
Loaded (-20˚F to 500˚F)

Check Flg 229, 4" 56" Class 150 RF CS, Cast, ASTM A216 WCB, Axial Flow Check (- VC-018
260 20°F to 400°F)

Check SCRD 133 ½" 1" 3000 SCRD SS, Forged, Type 303, Piston Check, Spring Loaded VC-035SS
(-20°F to 400°F)

Check SW ½" 2" Class 800 SW CS, Forged, ASTM A105, Piston Check, Spring KVCP-081
Loaded

Gate Flg ½" 2" Class 150 RF CS, Forged, ASTM A105, Bellows Sealed (-20°F to BSWBV-011
500°F)

Gate Flg 258 ½" 2" Class 150 RF CS, Forged, ASTM A105, Wedge Gate V-011

Gate Flg 2" 6" Class 150 RF CS, Cast, ASTM A216 WCB, Bellows Sealed (-20°F BSBBV-012
to 500°F)

Gate Flg 2" 36" Class 150 RF CS, Cast, ASTM A216 WCB, Wedge Gate V-012

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 2 of 7
affiliates without express, prior, written permission.
 Piping Material Specification
01CB325 Rev: 2.0, Date: Sep 2016

ITEM NOTES NPS Range SCH / RAT ENDS DESCRIPTION MDMT/CODE

VALVES Start End
Gate Flg 260 2" 36" Class 150 RF CS, Cast, ASTM A216 WCC, Double Block and V-0136RV
Bleed, Expanding Gate, Through-Conduit (-20°F to
550°F)

Gate Flg 260 2" 36" Class 150 RF CS, Cast, ASTM A216 WCC, Double Block and V-0138RV
Bleed, Expanding Gate, Through-Conduit

Gate Flg 260 2" 36" Class 150 RF CS, Cast, ASTM A216 WCC, Double Block and V-013RV
Bleed, Expanding Gate, Through-Conduit (-20°F to
350°F)

Gate SW ½" 2" Class 800 SW CS, Forged, ASTM A105, Bellows Sealed, Wedge BSWBKV-061
Gate

Gate SW ½" 2" Class 800 SW CS, Forged, ASTM A105, Reduced Port, Wedge KV-081
Gate

Gate SW x SCRD ½" 2" Class 800 SW x CS, Forged, ASTM A105, Bellows Sealed, Wedge BSWBKX-061
SCRD Gate

Gate SW x SCRD 258 ½" 2" Class 800 SW x CS, Forged, ASTM A105, Reduced Port, Wedge KX-081
SCRD Gate

Globe Flg ½" 2" Class 150 RF CS, Forged, ASTM A105, Bellows Sealed (-20°F to BSWBVG-011
500°F)

Globe Flg ½" 2" Class 150 RF CS, Forged, ASTM A105 VG-011

Globe Flg 2" 8" Class 150 RF CS, Cast, ASTM A216 WCB, Bellows Sealed (-20°F BSBBVG-012
to 500°F)

Globe Flg 63 2" 24" Class 150 RF CS, Cast, ASTM A216 WCB VG-012

Globe SW ½" 2" Class 800 SW CS, Forged, ASTM A105, Bellows Sealed (-20°F to BSWBKVG-
500°F) 061

Globe SW ½" 2" Class 800 SW CS, Forged, ASTM A105 KVG-081

Plug Flg: Special 133 1" 4" Class 150 RF CS, Cast, ASTM A216 WCB, Lubricated Plug (-20°F VP-011
to 350°F)

Plug Flg: Special 133 2" 36" Class 150 RF CS, Cast, ASTM A216 WCB, Double Block and VP-012
Bleed (-20°F to 350°F)

Plug Flg: Special 133 2" 12" Class 150 RF CS, Cast, ASTM A216 WCB, Lubricated Plug (-20°F VP-013
to 350°F)

FLANGES Start End

½" 2" Class 150 RFSW CS, ASTM A105, bore to match pipe

3" 24" Class 150 RFWN CS, ASTM A105, bore to match pipe

Blind ½" 24" Class 150 RFBLD CS, ASTM A105, ASME B16.5

Flgs at Valves 26" 56" Class 150 RFWN CS, ASTM A105, ASME B16.47 Series A (MSS SP-
44), bore to match pipe

Flgs In-Line 26" 56" Class 150 RFWN CS, ASTM A105, ASME B16.47 Series B, bore to
match pipe

ORIFICE FLANGE Start End

1" 24" Class 300 RFWN CS, ASTM A105, per ANSI B16.36 bore to match
pipe, SW Taps

STUD BOLTS Start End

½" 36" Alloy steel, ASTM A193 B7, with two ASTM A194
2H Heavy Hex Nuts each

GASKETS Start End

½" 24" Class 150 1/8" thick Spiral-Wound Type 304 SS, Flexible
graphite filler, ASME B16.20 (Gray Stripe), Flexitallic
Style "CG" or Company approved equal

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 3 of 7
affiliates without express, prior, written permission.
 Piping Material Specification
01CB325 Rev: 2.0, Date: Sep 2016

ITEM NOTES NPS Range SCH / RAT ENDS DESCRIPTION MDMT/CODE

GASKETS Start End
1" 24" Class 300 1/8" thick Spiral-Wound Type 304 SS, Flexible
graphite filler, ASME B16.20 (Gray Stripe), Flexitallic
Style "CG" or Company approved equal

Gaskets at Valves 26" 56" Class 150 1/8" thick Spiral-Wound Type 304 SS, Flexible
graphite filler, ASME B16.20 (Gray Stripe), Flexitallic
Style "CG" or Company approved equal, ASME
B16.47 Series A dimensions (MSS SP-44)

Gaskets In-Line 26" 56" Class 150 1/8" thick Spiral-Wound Type 304 SS, Flexible
graphite filler, ASME B16.20 (Gray Stripe), Flexitallic
Style "CG" or Company approved equal, ASME
B16.47 Series B dimensions

SEALANT Start End

Pipe Thread Sealant 294 ½" 2" 450°F and less use PTFE Gas tape or an equal
PTFE sealant compound; 451°F to 2100°F use Anti-
Seize Lubricant/Sealant (Lub-O-Seal or Company
approved equal).

MISCELLANEOUS Start End

Figure-8 Blind 286 ½" 24" Class 150 RF CS, ASTM A515 Gr. 70, ASME B16.48, face finish
per ASME B16.5

Paddle Blind ½" 24 Class 150 RF CS, ASTM A515 Gr. 70, ASME B16.48, face finish
per ASME B16.5

Paddle Spacer ½" 24 Class 150 RF CS, ASTM A515 Gr. 70, ASME B16.48, face finish
per ASME B16.5

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 4 of 7
affiliates without express, prior, written permission.
 Piping Material Specification
01CB325 Rev: 2.0, Date: Sep 2016

NOTES
63 Bypass valves less than 10" size shall normally be globe valves. Those 10" and larger shall normally be gate valves.
Exceptions require an approved waiver per Enterprise STD.0002.

74 Use for reciprocating pumps and compressors, spring loaded through 8", and 10" and larger to be installed in horizontal
position only.

109 If FEPM (Aflas) is used for seals instead of FFKM then the maximum temperature is 450°F.

118 Instrument bridles require S/80 min.

133 Normally used for specific UOP requirements only.

154 Pipe wall thickness was calculated based on: 285psig @ 100°F (SE=20,000, CA=0.125")

180 Sch 160 Requirements:

A. High point vents, low point drains, and instrument connections to be S/160 minimum through block valve.
B. Process piping to be installed as S/160 minimum to first valve or fitting (control valve bypasses excluded).
C. All swages required for the above applications to be S/160 minimum.

223 This specification is also applicable for MTBE and/or Methanol, equal to and less than 15 % with hydrocarbon. For MTBE
and/or Methanol greater than 15 % with hydrocarbons use piping spec 01CS310.

229 This valve is for centrifugal compressor discharge.

246 To use this specification, the Fluid Service Temperature must be higher than the piping MDMT. If it is lower for any piping
size, then a different piping specification that meets the piping MDMT must be selected for that size. In ASME B31.3,
piping MDMT is determined from Tables A–1, A–2 and 323.2.2A, and Figures 323.2.2.A and 323.2.2B. Fluid Service
Temperature (i.e., System Minimum Design Temperature) is defined as the lesser of the lowest system operating
temperature (including any design margin) or the local minimum ambient temperature (for cases where a pressurized non-
flowing system can essentially equalize at the ambient conditions for a significant period). The minimum ambient
temperature and the overall required MDMT for all pipe systems shall be determined by Project Engineering and shall be a
part of the Project Job Scope.

258 Use for vents, drains, and valved instrument connections

260 Use only if shown on P&ID.

286 Figure-8 Blinds above NPS 12 are not recommended because of the concentrated load added to the flanged joint and the
difficulties that can occur when handling the heavier blanks.

294 PTFE tape shall comply with Federal STD. A-A-58092, (formerly MIL-T-27730A). PTFE compound shall be certified to the
latest applicable ANSI and/or Federal standards.

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 5 of 7
affiliates without express, prior, written permission.
 Piping Material Specification
01CB325 Rev: 2.0, Date: Sep 2016

BRANCH CONNECTION LEGEND

SOL Soc-o-let
SO Stub On* (A Tee with Reducer or Reducing Tee may be used)
T Tee or Reducing Tee
W Weld-o-let
* Reinforce with a Fleetline weld saddle or equal if required by code.

BRANCH CONNECTION TABLE

BRANCH SIZE
HEADER ½" ¾" 1" 1½" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"
SIZE
½" T

¾" T T

1" T T T

1½" T T T T

2" SOL SOL SOL SOL T

3" SOL SOL SOL SOL SOL T

4" SOL SOL SOL SOL SOL T T

6" SOL SOL SOL SOL SOL T T T

8" SOL SOL SOL SOL SOL W T T T

10" SOL SOL SOL SOL SOL W W T T T

12" SOL SOL SOL SOL SOL W W T T T T

14" SOL SOL SOL SOL SOL W W W SO T T T

16" SOL SOL SOL SOL SOL W W W SO SO T T T

18" SOL SOL SOL SOL SOL W W W SO SO SO T T T

20" SOL SOL SOL SOL SOL W W W SO SO SO SO T T T

24" SOL SOL SOL SOL SOL W W W SO SO SO SO SO T T T

30" SOL SOL SOL SOL SOL W W W SO SO SO SO SO SO T T T

36" SOL SOL SOL SOL SOL W W W SO SO SO SO SO SO SO T T T

42" SOL SOL SOL SOL SOL W W W SO SO SO SO SO SO SO SO T T T

48" SOL SOL SOL SOL SOL W W W SO SO SO SO SO SO SO SO SO T T T

½" ¾" 1" 1½" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 6 of 7
affiliates without express, prior, written permission.
 Piping Material Specification
01CB325 Rev: 2.0, Date: Sep 2016

ATTACHMENT REVISION LOG/RECORD

Revision Location of Type of Change Reason For Change Publish Date
Number Change
Revision 0.0 N/A N/A N/A Publish Date:
27 Mar 2011

Revision 0.1 Item: Valves Corrected Typo VC-021 was changed to VC-012 Publish Date:
26 Sep 2012

Revision 1.0 Item: Pipe Revision Changed the maximum size for pipe from 54" to 56". Publish Date:
11 Apr 2014

Item: Valves Revision Changed the size range for the following valves: VB-013, VB-013F, VB-
015, VB-015F.

Item: Valves Addition Added quarter-turn, trunnion ball valves VB-014Y and VB-014FY

Item: Valves Change Called out upper temperature limits on valves as "Max" in place of
temperature range.

Item: Flanges Revision Changed the maximum size for flanges from 54" to 56".

Item: Gaskets Revision Changed the maximum size for gaskets from 54" to 56".

Item: Notes Addition Added Note 109 (previously Note 11) for agreement with VB-014Y and
VB-014FY when Aflas is used for the seals instead of FFKM.

Revision 2.0 Complete Update Numerous formatting changes, including renumbering and Publish Date:
Specification standardization of notes, were made due to the conversion of the 29 Sep 2016
piping specifications into the "Pipe Solutions Database."

Item: Valves Addition Added valve line items for short pattern Double-flanged and Lug-type
butterfly valves as defined by API 609.

Item: Valves Revision The upper size range of small bore forged, SW or SCRD valves was
revised up to 2".

Item: Valves Update The size range was updated for all rising stem ball valves.

Item: Valves Deletion Deleted globe valve line item specifying to "Use Gate."

Item: Valves Deletion Removed wafer-type butterfly valves, VF-014W and VF-015W.

Item: Update Descriptions for flanges and gaskets > 24" were updated to provide
Flanges, usage guidance for B16.47 Series A and B flanges and gaskets.
Gaskets

Item: Gaskets Addition A Class 300 gasket line item was added for orifice flanges.

Item: Sealant, Revision The description for "Pipe Thread Sealant" was revised and a reference
Notes note was added to provide clear guidance when specifying pipe thread
sealants.

Item: Addition Added line items for Figure-8 Blinds, Paddle Blinds, and Paddle
Miscellaneous Spacers per ASME B16.48.

Item: Notes Addition Added Note 63 to the Notes Section.

PRIVATE/PROPRIETARY: Not for use or disclosure outside Enterprise Products Company and/or its Page 7 of 7
affiliates without express, prior, written permission.