M
www.vishay.com
Vishay Dale Thin Film
High Reliability Thick Film Resistor,
Surface Mount Chip
FEATURES
• High purity alumina substrate for high power
dissipation (2 W max.)
• Wraparound terminations featuring a thin film Available
adhesion layer covered with a leach resistant
Actual Size nickel barrier layer for +150 °C operating
0502 conditions
Available
• High speed laser trimming for high volume
Utilizing proven expertise in thick and thin film resistors to requirements Available
satisfy your manufacturing needs, Vishay provides a high rel • Ruthenium based cermet thick film for
chip with the same reliability and stability found in military dependable performance
grade resistors. These chips are available in the widest • Fired-on glass passivation Available
range of sizes, values, and performance characteristics. And • Tape and reel packaging standard; static-free
manufactured on the Mil-PRF-55342 qualified controlled waffle pack available
production line All product is 100 % electrical tested for • Active trim and 0 chips
tolerance and after thermal shock testing and typically meet • Sulfur resistant (per ASTM B809-95 humid vapor test)
the requirements of group A in MIL-PRF-55342 • Material categorization: for definitions of compliance
performance. please see www.vishay.com/doc?99912
CONSTRUCTION Note
* This datasheet provides information about parts that are
Overglaze RoHS-compliant and/or parts that are non-RoHS-compliant. For
Resistor
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
Alumina Substrate TCR 100
Inner Electrode Plated Solder
TOL. 1
Nickel Barrier
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Ruthenium -
Resistance Range 10 to 25 M -
TCR: Absolute ± 100 ppm/°C to ± 300 ppm/°C -55 °C to +125 °C
Tolerance: Absolute ± 1 % to ± 10 % -
Stability: Absolute R ± 0.15 % -
Stability: Ratio - -
Voltage Coefficient - -
Working Voltage 25 V to 200 V -
Operating Temperature Range -55 °C to +155 °C -
Storage Temperature Range -55 °C to +155 °C -
Noise < -35 dB (typical) -
Shelf Life Stability: Absolute - -
COMPONENT RATINGS
CASE SIZE (1) POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE ()
0402 100 25 10 to 10M
0502 100 25 10 to 25M
0504 125 40 10 to 25M
0505 125 40 10 to 25M
0603 150 40 10 to 25M
0705 200 50 10 to 25M
0805 200 50 10 to 25M
1005 250 75 10 to 25M
1010 500 75 10 to 25M
1206 330 100 10 to 25M
1505 350 100 10 to 25M
2010 1000 175 10 to 25M
2208 750 150 10 to 25M
2512 2000 200 10 to 25M
Notes
• Consult factory for nominals above 25 M
(1) 0705 and 0805 are the same (only use 0805 when ordering)
Revision: 07-Aug-14 1 Document Number: 60031
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE TERM L W T D E
0402 B 0.042 ± 0.006 0.022 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.010 ± 0.005
0502 B 0.055 ± 0.005 0.025 ± 0.005 0.020 max. 0.010 ± 0.005 0.015 ± 0.005
0504 B 0.055 ± 0.005 0.040 ± 0.005 0.020 ± 0.005 0.010 ± 0.005 0.010 ± 0.005
0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0603 B 0.064 ± 0.006 0.032 ± 0.005 0.010 to 0.033 0.012 ± 0.005 0.015 ± 0.005
0705, 0805 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010
1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2010 B 0.197 ± 0.006 0.098 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
2512 B 0.250 ± 0.006 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST 10 R ± (%) 100 k R ± (%)
Thermal Shock 0.02 0.03
Short Term Overload 0.02 0.02
Low Temperature Operation 0.03 0.04
Resistance to Solder Heat 0.06 0.02
Moisture Resistance 0.10 0.08
High Temperature Exposure 0.02 0.02
DERATING CURVE
100
Precent of Rated Power
80
60
40
20
0
0 70 125 155
Ambient Temperature °C
Revision: 07-Aug-14 2 Document Number: 60031
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M-1206K5001GBT1
M - 1 2 0 6 K 5 0 0 1 G B T 1
GLOBAL CASE TCR
RESISTANCE TOLERANCE TERMINATION PACKAGING
MODEL SIZE CHARACTERISTIC
M- = High rel 0402 K = 100 ppm/°C First 3 digits are F = 1 % B = Wraparound BS = BULK
cermet 0502 M = 300 ppm/°C significant figures G = 2 % nickel barrier 100 min., 1 mult
thick film 0504 X = 0 jumper and the last digit J = 5 % with plated WS = WAFFLE
wraparound 0505 specifies the K = 10 % tin/lead solder 100 min., 1 mult
0603 number of zeros S = Wraparound
0805 to follow. “R” N = Not nickel barrier TAPE AND REEL
1005 designates the trimmed with plated T0 = 100 min., 100 mult
1010 decimal point. matte tin T1 = 1000 min., 1000 mult (1)
1206 lead (pb)-free T3 = 300 min., 300 mult
1505 Example: solder T5 = 500 min., 500 mult
2010 10R0 = 10 G = Epoxy TF = Full reel
2208 1002 = 10 k bondable TS = 100 min., 1 mult
2512
Historical Part Number example: M0505K1003JBT (for reference purposes only)
M 0505 K 1003 J B T
TCR
STYLE CASE SIZE OHMIC VALUE TOLERANCE TERMINATION PACKAGING
CHARACTERISTIC
Note
(1) Preferred packaging code
Revision: 07-Aug-14 3 Document Number: 60031
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12 1 Document Number: 91000
