CS

Vishay Thin Film

Ceramic Sandwich, Single-In-Line Resistor Networks
(Low profile 0.20 Custom)
FEATURES
• Lead (Pb)-Free available
• Gold-to-gold terminations. External leads are Pb-free
attached directly to gold pads on the ceramic Available
substrate by thermo-compression bonding
(no internal solder)
• Low profile (0.200 min.)
Actual Size • Custom pin-outs available
Vishay Thin Film presents a design concept in precision thin
TYPICAL PERFORMANCE
film resistor networks. The essence of this new concept is
the marriage of two principle design elements . . . a unique ▲ ABS TRACKING
resistive film, having electrical properties comparable to those TCR 25 2
of wire-wound resistors, and a rugged, low cost, ceramic
ABS RATIO
package and an almost limitless variety of sizes and
configurations. TOL 0.05 0.01

SCHEMATIC

THROUGH HOLE
Custom schematics available.
Please consult factory.

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

MATERIAL TAMELOX® TANTALUM NITRIDE

Resistance Range 20Ω to 2MΩ total 20Ω to 500KΩ total

TCR: Tracking ± 2ppm/°C ± 5ppm/°C - 55°C to + 125°C
Absolute ± 25ppm/°C to ±10ppm/°C ± 100ppm/°C to ± 50ppm/°C - 55°C to + 125°C
Tolerance: Ratio ± 0.5% to ± 0.01% ± 0.5% to ± 0.02% + 25°C
Absolute ± 1.0% to ± 0.05% ± 1.0% to ± 0.05% + 25°C
Power Rating: Resistor 100mW per element 100mW per element typical at + 25°C
Stability: Absolute 500ppm 1000ppm 2000 hrs. @ + 70°C
∆R Ratio 150ppm 200 ppm 2000 hrs. @ + 70°C
Voltage Coefficient < 0.1ppm/Volt 0.1ppm/Volt
Working Voltage 100 Volts 100 Volts
Operating Temperature Range - 55°C to +125°C - 55°C to + 125°C
Storage Temperature Range - 55°C to +125°C - 55°C to + 125°C
Noise < - 30dB < - 30dB
Thermal EMF < 0.08µV/°C < 0.08µV/°C
Shelf Life Stability Absolute < 100ppm < 100ppm 1 year @ +25°C
∆R Ratio < 20ppm < 20ppm

VISHAY THIN FILM • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • GERMANY +49.9287.710 FAX: +49 9287.70435 • ISRAEL +972.3.557.0945 FAX: +972.3.558.9121
• ITALY + 39.2.300.11919 FAX: +39.2.300.11999 • JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 • SINGAPORE +65.788.6668 FAX: +65.788.0988
• SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 • UK +44 191 514 8237 FAX: +44 1953 457 722 • USA: (610) 407-4800 FAX: (610) 640-9081

Document Number: 60081 For technical questions contact: thin-film@vishay.com www.vishay.com

Revision 05-May-05 83
 CS
Vishay Thin Film Ceramic Sandwich, Single-In-Line
Resistor Networks (Low profile 0.20 Custom)

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION INCHES MILLIMETERS

A 0.100 typ.** 2.54 typ.
B 0.020 ± 0.002 typ. 0.51 ± 0.05 typ.
“L” Max C 0.125 min. 3.17 min.
D 0.100 max. 2.54 max.
E 0.010 0.25

“H” ** Non-accum.

NUMBER LENGTH (L) HEIGHT (H)

C OF PINS In. mm In. mm
3 0.320 8.13
A B
4 0.420 10.67
5 0.520 13.21
Pin #1 Part # Date Code 6 0.620 15.75 0.200* 7.11*
7 0.720 18.25
8 0.820 20.83
9 0.920 23.37
10 1.020 25.91
THROUGH HOLE

*Resistance value and schematic dependent. By occupying more

VISHAY Logo
than one 0.100 inch space, higher values are available.

MECHANICAL SPECIFICATIONS
Resistive Element Tamelox® or Tantalum Nitride Terminals
Substrate Material Alumina
Body Ceramic
Copper Alloy #42
Plating Gold
Marking Resistance to Solvents Per MIL-PRF-83401
Lead (Pb)-Free Option 96.5% Sn, 3.0% Ag, 0.5% Cu
Lead (Pb)-Free Finish Hot Solder Dip

How to Order
Special requirements should be identified in advance, but as a minimum, you should have the following information

Electrical Mechanical
1. Resistors, by value and tolerance. 1. Maximum allowable seated height (from PC board to top
2. Reference resistor(s) and matching of which resistors to which of network).
reference resistors. 2. Special marking concerns.
3. Resistance by ratio. 3. Schematic pin out of package.
4. Absolute temperature coefficient of resistivity. 4. Specify if lead (Pb)-free.
5. Temperature tracking of subordinate resistors to reference
resistor(s).
6. Maximum operating voltage.
7. Resistor power ratings.
8. Operating temperature range.

For additional assistance call Applications Engineering (716) 283-4025.

Lead (Pb)-Free Example: CUSTOM

VISHAY THIN FILM • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • GERMANY +49.9287.710 FAX: +49 9287.70435 • ISRAEL +972.3.557.0945 FAX: +972.3.558.9121
• ITALY + 39.2.300.11919 FAX: +39.2.300.11999 • JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 • SINGAPORE +65.788.6668 FAX: +65.788.0988
• SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 • UK +44 191 514 8237 FAX: +44 1953 457 722 • USA: (610) 407-4800 FAX: (610) 640-9081

www.vishay.com For technical questions contact: thin-film@vishay.com Document Number: 60081

84 Revision 05-May-05
 Legal Disclaimer Notice
Vishay

Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.

Document Number: 91000 www.vishay.com

Revision: 08-Apr-05 1