NTCSC0201E3.....

T
www.vishay.com
Vishay BCcomponents
SMD 0201, Commercial Grade NTC Thermistors
FEATURES
• TCR ranging from -6.5 %/K at -40 °C to -2 %/K
at 125 °C
• Tolerance on R25 of ± 1 %
• Suitable for wave or reflow soldering
• NiSn terminations
• cULus recognized, file E148885
(UL category XGPU2 / XGPU8)
LINKS TO ADDITIONAL RESOURCES • Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Design Tools Calculators Models
APPLICATIONS
• Temperature sensing, protection and compensation in
QUICK REFERENCE DATA
industrial, telecom and consumer applications.
PARAMETER VALUE UNIT
Resistance value at 25 °C 10K to 100K Ω Examples are:
Tolerance on R25-value ±1 % - Battery chargers
B25/85-value 3435 to 4311 K - Power supplies
Tolerance on B25/85-value 3 % - Office equipment
Maximum power dissipation
70 mW - LED compensation
at 25 °C Pmax25
Thermal time constant τ <3 s This series is not recommended for automotive
Dissipation factor D 1 mW/K applications.
Operating temperature range
-40 to +125 °C
at zero power (1) DESCRIPTION
Storage temperature range -40 to +125 °C Size 0201 (M0603) SMD chip thermistor with negative
Weight 0.16 mg temperature coefficient (TCR) and matte tin (Sn) plated
Note terminations. The device has no marking.
(1) Zero power is considered as measuring power maximum 1 % of
Pmax25 PACKAGING
AGENCY APPROVALS Available in 8 mm punched paper tape on reel package of
15 000 units.
Agency approval documents, please see:
www.vishay.com/ppg?29238&documents CAUTIONS AND WARNINGS ON MOUNTING
AND HANDLING
DESIGN-IN SUPPORT
Please read the special instructions:
For complete curve computation, please visit:
see www.vishay.com/doc?29224.
www.vishay.com/thermistors/ntc-rt-calculator/

ELECTRICAL DATA AND ORDERING INFORMATION

R25 R25-TOL. B25/85 B25/85-TOL.
SAP MATERIAL AND ORDERING NUMBER
(Ω) (± %) (K) (± %)
10 000 1 3435 3 NTCSC0201E3103FLHT
22 000 1 3414 3 NTCSC0201E3223FLHT
47 000 1 4108 3 NTCSC0201E3473FXHT
100 000 1 4311 3 NTCSC0201E3104FXHT

Revision: 24-Mar-2025 1 Document Number: 29243

For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 NTCSC0201E3.....T
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters

L1 W T L2 AND L3

T W 0.6 ± 0.05 0.3 ± 0.05 0.3 ± 0.05 0.15 ± 0.05

L2 L3
L1

SOLDERING CONDITIONS
Soldering, handling, and mounting conditions are detailed in the instructions document: see www.vishay.com/doc?29224.
Typical examples of soldering processes that will provide reliable joints without damage, are shown below.

Reflow Soldering Lead (Pb)-free Reflow Soldering Profile

10 s 40 s max.
300 300
260 °C 260 °C
250 250 | 245 °C
|245 °C

Temperature (°C)
Temperature (°C)

235 °C
200 215 °C 10 s 200
|170 °C 20 s min.
180 °C
150 150 |60 s
130 °C |120 °C
40 s 6 K/s
100 100
max.
2 K/s
2 K/s max. limit
50 50
normal
0 0
0 50 100 150 200 250 0 50 100 150 200 250 300 350
Time (s) Time (s)

Recommended solder land pattern dimensions (mm)

0.25

0.3

0.75

PACKAGING
TAPE SPECIFICATIONS
All tape specifications are in accordance with IEC 60286-3. Basic dimensions are given below. Carrier tape material is paper.

DIMENSIONS OF PAPER TAPE in millimeters

Sprocket holes
PARAMETER DIMENSION
P0 Ø D0 T A0 (1) 0.4 ± 0.1
B0 (1) 0.7 ± 0.1
E W 0.8 ± 0.3
E 1.75 ± 0.1
B0
F F 3.5 ± 0.05
W
D0 1.55 ± 0.05
P0 (2) 4.0 ± 0.05
P1 2.0 ± 0.05
A0
P1 T tape thickness max. 0.55
Chip cavity
Notes
(1) Measured 0.3 mm above base pocket
(2) P pitch cumulative error over any 10 pitches ± 0.2 mm
0

Revision: 24-Mar-2025 2 Document Number: 29243

For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of
the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or
selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized
Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2025 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jan-2025 1 Document Number: 91000

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000