IDCS3014

www.vishay.com
Vishay Dale
Ferrite Power Inductor, Shielded Drumcore
FEATURES
• 7.6 mm x 7.6 mm x 3.5 mm size
• Shielded, assembled ferrite construction
• Inductance range 3.3 μH to 470 μH
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912

APPLICATIONS
• DC/DC power supplies
• Noise suppression and filtering

STANDARD ELECTRICAL SPECIFICATIONS

INDUCTANCE HEAT RATING CURRENT
L0 INDUCTANCE TOLERANCE DCR MAX. DC TYP.
PART NUMBER (μH) (%) (mΩ) (A) (1)
IDCS3014ER3R3N 3.3 30 28 1.90
IDCS3014ER4R7N 4.7 30 43 1.70
IDCS3014ER6R8N 6.8 30 49 1.60
IDCS3014ER8R2N 8.2 30 59 1.50
IDCS3014ER100M 10 20 64 1.40
IDCS3014ER150M 15 20 90 1.10
IDCS3014ER220M 22 20 132 0.96
IDCS3014ER330M 33 20 192 0.75
IDCS3014ER470M 47 20 288 0.67
IDCS3014ER680M 68 20 372 0.59
IDCS3014ER820M 82 20 455 0.52
IDCS3014ER101M 100 20 540 0.60
IDCS3014ER151M 150 20 780 0.37
IDCS3014ER221M 220 20 1260 0.29
IDCS3014ER331M 330 20 2004 0.33
IDCS3014ER471M 470 20 2460 0.20
Notes
• All test data is referenced to 25 °C ambient
• Operating temperature is -40 °C to +105 °C
• Test condition: 100 kHz, 0.3 V for 8.2 μH and below, and 1 kHz, 0.3 V for 10 μH and above
• Storage condition: -40 °C to +105 °C (on board); and -10 °C to +40 °C and < 70 % RH (in component packaging)
• Resistance to solder heat: 255 °C for 10 s (2 times max. through reflow)
(1) DC current (A) that will cause an approximate ΔT of 40 °C or cause L to drop by 25 %, whichever is lower
0

Revision: 20-Sep-2024 1 Document Number: 34631

For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 IDCS3014
www.vishay.com
Vishay Dale

DIMENSIONS in inches [millimeters]

0.311
[7.9]

0.299 max. 0.079

[7.6 max.] [2.0]

0.193
[4.9]

Typical pad layout

0.299 max. 0.138 max.
[7.6 max.] [3.5 max.]

DESCRIPTION
IDCS3014 2.2 μH ± 30 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD

GLOBAL PART NUMBER

I D C S 3 0 1 4 E R 2 R 2 N

PRODUCT FAMILY SIZE PACKAGE INDUCTANCE INDUCTANCE

CODE VALUE TOLERANCE
ER = 2R2 = 2.2 μH M = ± 20 %
tape and reel N = ± 30 %

Revision: 20-Sep-2024 2 Document Number: 34631

For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of
the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or
selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized
Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jul-2024 1 Document Number: 91000

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000