Scribd
Upload
5 views3 pages

HHHH

This document provides disassembly and assembly instructions for the turbocharger of the 416F Backhoe Loader powered by the C4.4 engine. It includes detailed steps for removing various components, such as the exhaust elbow and hose assemblies, while emphasizing the importance of cleanliness and proper fluid disposal. The publication is part of a technical guide dated from January 2013 and updated in August 2013.

Uploaded by

qadriah0304
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views3 pages

HHHH

This document provides disassembly and assembly instructions for the turbocharger of the 416F Backhoe Loader powered by the C4.4 engine. It includes detailed steps for removing various components, such as the exhaust elbow and hose assemblies, while emphasizing the importance of cleanliness and proper fluid disposal. The publication is part of a technical guide dated from January 2013 and updated in August 2013.

Uploaded by

qadriah0304
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

416F Backhoe Loader KSF00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...

Page 1 of 3

Shutdown SIS

Previous Screen

Product: BACKHOE LOADER


Model: 416F BACKHOE LOADER KSF
Configuration: 416F Backhoe Loader KSF00001-UP (MACHINE) POWERED BY C4.4 Engine

Disassembly and Assembly


C4.4 Engines for Caterpillar Built Machines
Media Number -UENR0602-09 Publication Date -01/08/2013 Date Updated -21/08/2013

i04319656

Turbocharger - Remove - Side Mounted Turbochargers


SMCS - 1052-011

Removal Procedure
Start By:

A. Remove the exhaust elbow from the turbocharger. Refer to Disassembly and Assembly,
"Exhaust Elbow - Remove and Install" for the correct procedure.

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

NOTICE

Care must be taken to ensure that fluids are contained during


performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.

Dispose of all fluids according to local regulations and mandates.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 2/28/2023
416F Backhoe Loader KSF00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5... Page 2 of 3

Illustration 1 g02530062

1. Loosen hose clamps and disconnect the hose assemblies from turbocharger inlet (4) and from
turbocharger outlet (3) .

2. Remove banjo bolt (1) from tube assembly (5). Remove sealing washers (2) (not shown).

3. Remove banjo bolt (6) from tube assembly (5). Remove sealing washers (7) (not shown).

4. Remove tube assembly (5) from the turbocharger and the cylinder block.

5. Slide hose clamp (10) along hose assembly (11). Disconnect hose assembly (6) from the
wastegate actuator.

6. Remove bolts (13) and bolts (9). Remove tube assembly (14) from the turbocharger.

7. Remove gasket (8) (not shown) and gasket (12) (not shown).

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 2/28/2023
416F Backhoe Loader KSF00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5... Page 3 of 3

Illustration 2 g02530138

8. Remove nuts (17). Remove turbocharger (19) from exhaust manifold (15) .

Note: Do not use the actuator rod to lift the turbocharger.

9. Remove gasket (18) (not shown).

10. If necessary, remove the studs (16) (not shown) from turbocharger (19) .

Copyright 1993 - 2023 Caterpillar Inc. Tue Feb 28 08:28:45 UTC+0800 2023
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 2/28/2023

You might also like