SUBJECT TS IQS IQS SCOPE

1 This standard specifies requirements, sampling and test methods of

Fabric Softener TS 13274 IQS 2304 fabric softener containing active matter. This standard is not applied
on fabric softener for industrial use.
2 This standard specifies definitions, requirements, sampling and test
methods and supplying used as grease remover and cleaner for
Oven cleaner and grease remover TS 13396 IQS 2296
kitchen equipment. This standard is applied on kitchen equipment
for auto cleaning
3 Cleaning compound, rug and TS 13372 IQS 1553 This standard specifies requirements, sampling and test methods of
upholstery Cleaning compound, rug which includes three types.
4 Liquid Glass Cleaner, Ammonia – Free TS 11636 TR Chem This standard covers liquid glass cleaner which free of, Ammonia
No(50)
5 Hair dyes, liquid or putty TS 10061 IQS 1405 This standard covers, liquid or putty Hair dyes which composed
from :oxidant agent and dye.
TS 12717
6 Hair permanent waving preparation TS 10340 IQS 1790 This standard standard specifies requirements, sampling and test
composed methods of hair permanent which composed from: active matter
TS 10234 and buffer matter.
7 Aerosol hair spray TS 6605 IQS 1795 This standard standard specifies requirements, sampling and test
methods of aerosol hair spray .this standards is not applied on dye
hair spray..
8 Shampoo for Sensitive, Dyed, or TS 9676 TR Chem This standard covers synthetic shampoos, used for Sensitive, Dyed,
Damaged Hair No(59) or Damaged Hair . It does not cover shampoos, used for medical
purposes.
9 Porcelain sanitary cleaning powder TS 13411 IQS 1277 This standard specifies requirements, sampling, test methods of
Porcelain sanitary cleaning powder which used on
porcelain(resisting to acid) .this standards is not applied on metal
surface or porcelain (unresisting to acid) or porcelain in contact
with metal surface.
10 Porcelain cleaning solution TS 13411 IQS 1723 This standard specifies requirements, sampling, test methods of
Porcelain cleaning solution which used on porcelain(resisting to
acid) .this standards is not applied on metal surface or porcelain
(unresisting to acid) or porcelain in contact with metal surface.
11 Sodium hypochlorite solution TS 5682 IQS 1266 This standard specifies sodium hypochlorite solutions suitable for
industrial and domestically use.
12 Calcium hypochlorite and chlorinated TS 2107 IQS 2140 This standard specifies requirements, sampling, test methods of
lime both calcium hypochlorite and chlorinated lime for bleaching,
sterilization.

13 Soap (Dove( TS 54 STR Chem This standard covers soap containing surface active agents..
No(1)
14 Perfumes TSE K 20 IQS 939 This standard specifies requirements, sampling and test methods of
perfumes..

15 Shampoo TS 9676 IQS 945 This standard covers shampoos, used as hair cleaner This standard is
not applied on anti druft shampoo, baby shampoo and medical
shampoo.
16 Body Shampoo for children TS 9676 TR Chem This standard covers body shampoos . It does not cover body
No(52) shampoo used for medical purposes.
17 liquid hand cleaner, TS 11885 this standard specifies the requirements of these products.
bath gel TR Chem
shower gel No(54)

18 Lather shaving cream TS 54 IQS 931 This standard covers specifies the requirements, sampling, and test
methods of Lather shaving cream which used via brush.
19 tooth paste tooth) TS EN ISO IQS 1100 This standard covers specifies the requirements, sampling, and test
11609 methods of tooth paste .this standard is not applied on products p
for therapeutic and medical purposes
20 Shaving Gel TS 54 TR Chem This Standard specifies requirements for the physical and chemical
No(92) properties. It also specifies requirements for the marking, labelling
and packaging.
21 Toilet soap TS 54 IQS 20 This standard covers specifies the requirements, sampling, and test
methods of soap . it is not applied on the product for medical
purpose or glycerin soap or dead sea soap.
22 Liquid toilet soap TS 11885 IQS 695 This standard covers specifies the requirements, sampling, and test
methods of tooth paste .this standard is not applied on products p
for therapeutic and medical purposes.
23 Deodorant, general purpose (Aerosol TSE K 20 IQS 1864 This standard covers specifies the requirements, sampling, and test
for indoor occupied areas methods of Deodorant, general purpose (Aerosol for indoor
occupied areas
24 Deodorant, general purpose (Aerosol TS 6605 IQS 1864 This standard covers specifies the requirements, sampling, and test
for indoor occupied areas) methods of Deodorant, (Aerosol for indoor occupied areas
25 Deodorant, toilet cake TSE K 352 IQS 1869 This standard specifies the requirements, sampling, tests of
Deodorant, toilet cake
26 Air Deodorant spray TSE K 20 TR Chem This TR specifies requirements for the physical and chemical
No(61) properties. It also specifies requirements for the marking, labelling
and packaging.
27 Multi use water freshener for sofas, TSE K 20 STR Chem This STR specifies requirements and test methods and It also
furniture, curtains, carpets, holy sites, No(3) specifies requirements for the marking, labelling and packaging.
bed covers, quilt , towels, cabinet,
clothes, ironing and vehicles (SARA)
28 skin cream TS 4811 IQS 1161 This standard specifies the requirements, sampling, and test
methods of this product. This standard is not applied on products
for therapeutic and medical purposes.
29 Skin powders TS 2973 IQS 1654 This standard specifies the requirements, sampling, and test
methods of this product. This standard is not applied on products
for therapeutic and medical purposes and products which included
with IQS (1123)
30 Eye shadow TS 10243 IQS 1832 This standard specifies the requirements, sampling, and test
, TS 10244 methods of this product..
31 Hydrogen Peroxide 9%(30 vols.) 12%(40 TS 10340 TR Chem This TR specifies requirements for the physical and chemical
vols.) No(6) properties. It also specifies requirements for the marking, labelling
and packaging..
32 Body Shampoo TS 9676 TR Chem This TR specifies requirements for the physical and chemical
No(14) properties. It also specifies requirements for the marking, labelling
and packaging.
33 Mascara – all types TS10243 , TR Chem This TR specifies requirements for the physical and chemical
TS10244 No(19) properties. It also specifies requirements for the marking, labelling
and packaging
34 Liquid Eye Liner TS10243 , TR Chem This TR specifies requirements for the physical and chemical
TS10244 No(20) properties. It also specifies requirements for the marking, labelling
and packaging
35 Cosmetic pencils TS10243 TR Chem This standard covers specifies the requirements, sampling, and test
TS10244 No(104) methods of cosmetic pencils.
36 Thermoplastics pipe and fitting systems TR Chem TS 10762-1 Thermoplastics multilayer cross-linked polyethylene (PE-X) pipe
for hot and cold water for domestic N°(84) EN ISO and fitting systems for hot and cold water for domestic purposes and
purposes and heating installations in 15875-1 heating installations in buildings
buildings. Specification for crosslinked
polyethylene (PE-X) pipes and
associated fittings
37 Unplasticized polyvinyl chloride pipes TS EN ISO TR Chem This TR specifies requirements , marking, labeling and packaging of
for cold potable water 1452-2 No(86) Unplasticized polyvinyl chloride pipes for cold potable water.

38 Polyethylene water storage tanks TSE K 36 IQS 2295 This specification specifies the requirements of water tanks made of
polyethylene molded by rotating the vertical, horizontal, dimensions
and installation tanks.
39 Horizontal potable water tanks made of TS 11793 Replace by This standard applies to water tanks operating within temperatures
glass fiber reinforced unsaturated IQS 5063 (1 - 60) ° C.
polyester
40 Textile or synthetic reinforced plastic TS EN ISO 5774 IQS 1721 This specification does not apply to underground or mobile water
hoses with plastic screw ends tanks.

41 Wash basin TS EN 14688 IQS 1427 This specification specifies the requirements and methods of
examining the bathtubs made of plastic sheets in a thermoplastic
manner and does not include the dimensions of the basin
42 Unplasticized PVC pipes for drainage TS EN 1329-1 IQS 1512 This specification describes the requirements and methods of taking
inside building samples and testing pipes made of polyvinyl chloride that are non-
plasticized and used for indoor water drainage in the following
areas:
43 Polyethylene subducts for cables TSE K 258 IQS 2143 This criteria covers Corrugated pipes (PE) and fittings for using as
cable enclosures

44 Plastic joints for water drain TS EN 681 TR Chem Plastic joints for water drain (corrugated with screwends, all kinds)
(corrugated with screwends, all kinds) No(75)
45 Polypropylene pipes for drinking water TS EN ISO TR Chem Plastics piping systems for hot and cold water installations -
15874 No(74) Polypropylene (PP)

46 unplasticized PVC joints forsewer pipes TS EN TR Chem specifies the requirements for unplasticized PVC joints forsewer
ISO1452-3, TS No(72) pipes
EN 1401
47 Unplasticized PVC sewage and drain TS EN 1329-1 TR Chem specifies the requirements for unplasticized poly(vinyl chloride)
pipes No(80) (PVC-U) pipes, fittings and piping systems intended for use for non-
Replace by pressure underground drainage and sewerage for the conveyance of
IQS 5037 soil and waste discharge of domestic and industrial origin, as well as
surface water.

It covers buried pipework but does not apply to piping systems

buried within the building structure.

It is applicable to PVC-U pipes with or without an integral socket

48 Polyethylene pipes for cold water TS EN 12201-2 TR Chem specifies the general aspects of polyethylene (PE) piping systems
services No(81) (mains and service pipes) intended for the conveyance of water for
human consumption, including raw water prior to treatment and
water for general purposes. It also specifies the test parameters for
the test methods to which it refers.
In conjunction with the other parts of ISO 4427, it is applicable to PE
pipes, fittings, their joints and to mechanical joints with components
of other materials, intended to be used under the following
conditions: a maximum operating pressure (MOP) up to and
including 25 bar; an operating temperature of 20 °C as the reference
temperature.
49 Paints and varnishes - Enamel, alkyd,
This standard specifies the requirements and methods of sampling
and examination of the gloss and semi-gloss paints, which dry in the
gloss air drying for exterior and interior TS 39 IQS 960
air and are used on wood, metal and cement surfaces for internal
purposes.
and external use.
50 This specification includes one type of pre-painted, matte finish that
dries in air (except for water emulsions) for internal use as a final
Decorative paint for interior use TS 5808 IQS 1057
paint on metal and wood, gypsum walls. Sealed and similar materials
coated with a base or previously coated paint.
51 Semi gloss enamel TS 39 IQS 1506 This standard specifies the requirements and methods of sampling
 was stopped
and merged
into IQS 960 and examination of the gloss and semi-gloss paints, which dry in the
that Includes air and are used on wood, metal and cement surfaces for internal
both of gloss and external use.
and semi
gloss paints
52 This specification includes the requirements and methods of
sampling and testing of the nitrocellulose settling paste used as a flat
Nitrocellulose surfacer for automobiles TS 789 IQS 1059
material or as a filler in the coating group for the final coating of
equipment, equipment, vehicles and general purposes.
53 This specification specifies the requirements and methods of
sampling and examination of a clear varnish and nitrocellulose
Clear varnish TS 8656 IQS 1840 (Clare) which is dry in air and used for general purposes at home
and abroad on metal and ceramic surfaces coated with suitable base
paint such as cars and furniture.
54 This specification specifies the requirements and methods of
sampling and examination of a clear varnish and nitrocellulose
Clear varnish TS 8657 IQS 1840 (Clare) which is dry in air and used for general purposes at home
and abroad on metal and ceramic surfaces coated with suitable base
paint such as cars and furniture.
55 This specification specifies the requirements and methods of
sampling and examination of a clear varnish and nitrocellulose
Clear varnish TS 8693 IQS 1840 (Clare) which is dry in air and used for general purposes at home
and abroad on metal and ceramic surfaces coated with suitable base
paint such as cars and furniture.
56 This specification includes the requirement of red iron oxide - the
Paints and varnishes red iron oxide
TS 1048 IQS 1056 basis of alkyd used as an initial coating for ferrous metals that are
primer-alkyd
not exposed to harsh weather conditions.
57 This specification includes the requirement of red iron oxide - the
Paints and varnishes red iron oxide
TS 4931 IQS 1056 basis of alkyd used as an initial coating for ferrous metals that are
primer-alkyd
not exposed to harsh weather conditions.
58 This specification includes the requirement of red iron oxide - the
Paints and varnishes red iron oxide
TS 11338 IQS 1056 basis of alkyd used as an initial coating for ferrous metals that are
primer-alkyd
not exposed to harsh weather conditions.
59 This specification specifies the requirements of road planning coating
Paints and varnishes traffic ,highway ,
TS EN 1871 IQS 1101 - the type of non-water solvent and free of glass granules of different
white and yellow paint
colors (white, yellow and black) used on asphalt paved roads and
 concrete.
60
TR Chem This requirement for paint spray (acrylic + nitrocellulose) without
Spraying Lacquer, Matt TS 8694
No.(65) gloss.

61 Paints and varnishes - Thinner for This specification specifies the requirements and methods of
cellulose nitrate base paints and TS 9720 IQS 1414 sampling and testing for the diluted cellulose nitrate coating used for
lacquers cars, aircraft and furniture.
62 This standard specifies the requirements, methods of sampling and
Paints and varnishes - PVA Synthetic TS 7847 , IQS 985
testing of artificial resin emulsion used on the internal and external
resin emulsion paint TS 5808 surfaces of buildings
63 This specification specifies the requirements and methods of
TS 7847 , TR Chem sampling and testing for acrylic paint emulsion used for coating
Acrylic emulsion paint
TS 5808 No.(94) Internal and external surfaces of non-metal buildings except
decorative emulsion paints.
64 TS 7847 , TR Chem Specifies requirements for conventional water-borne paints suitable
Single-pack water-borne paints
TS 5808 No.(94) for marking traffic-bearing bituminous or concrete road surfaces, and
makes provision for white, yellow and other colours.