Safety Data Sheet

Hempel's Curing Agent 98021

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 2020/878 - Europe

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier
Product name : Hempel's Curing Agent 98021
Product identity : 9802100000, 0013885F
Product type : Curing agent

1.2 Relevant identified uses of the substance or mixture and uses advised against
Field of application : used only as part of two- or multi component products.
Identified uses : Industrial applications, Professional applications, Used by spraying.

1.3 Details of the supplier of the safety data sheet 1.4 Emergency telephone number
Company details : HEMPEL A/S Emergency telephone number (with hours of operation)
Lundtoftegårdsvej 91
DK-2800 Kgs. Lyngby +45 45 93 38 00 (08.00 - 17.00)
Denmark See section 4 First aid measures.
Tel.: + 45 45 93 38 00
hempel@hempel.com
Date of issue : 5 May 2025
Date of previous issue : 9 December 2024.

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Flam. Liq. 3, H226 FLAMMABLE LIQUIDS
Acute Tox. 4, H332 ACUTE TOXICITY (inhalation)
Skin Irrit. 2, H315 SKIN CORROSION/IRRITATION
Eye Dam. 1, H318 SERIOUS EYE DAMAGE/ EYE IRRITATION
Skin Sens. 1, H317 SKIN SENSITIZATION
Aquatic Chronic 3, H412 AQUATIC HAZARD (LONG-TERM)
See Section 11 for more detailed information on health effects and symptoms.

2.2 Label elements

Hazard pictograms :

Signal word : Danger

Hazard statements : H226 - Flammable liquid and vapor.
H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H318 - Causes serious eye damage.
H332 - Harmful if inhaled.
H412 - Harmful to aquatic life with long lasting effects.
Precautionary statements :
Prevention : Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
Response : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Hazardous ingredients : xylene
polymer of C18-unsatd. fatty acids dimers with tall-oil fatty acids and triethylenetetramine
butan-1-ol
3,6-diazaoctanethylenediamin
Special packaging requirements
Containers to be fitted with child- Not applicable.
resistant fastenings :
Tactile warning of danger : Not applicable.

Version: 0.09 Page: 1/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 2: Hazards identification

2.3 Other hazards

This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
Other hazards which do not result None known.
in classification :

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Product/ingredient name Identifiers % Regulation (EC) No. 1272/2008 [CLP] Type

xylene REACH #: 01-2119488216-32 ≥25 - ≤50 Flam. Liq. 3, H226 ATE [Dermal] = 1100 mg/kg [1] [2]
EC: 215-535-7 Acute Tox. 4, H312 ATE [Inhalation (gases)] =
5000 ppm
CAS: 1330-20-7 Acute Tox. 4, H332
Index: 601-022-00-9 Skin Irrit. 2, H315
polymer of C18-unsatd. fatty REACH #: 01-2119972320-44 ≥10 - <25 Skin Irrit. 2, H315 - [1]
acids dimers with tall-oil fatty EC: 500-191-5 Eye Dam. 1, H318
acids and triethylenetetramine CAS: 68082-29-1 Skin Sens. 1A, H317
Aquatic Chronic 2, H411
ethylbenzene REACH #: 01-2119489370-35 ≥5 - <10 Flam. Liq. 2, H225 ATE [Inhalation (gases)] = [1] [2]
EC: 202-849-4 Acute Tox. 4, H332 4500 ppm
CAS: 100-41-4 STOT RE 2, H373
Index: 601-023-00-4 (hearing organs)
Asp. Tox. 1, H304
butan-1-ol REACH #: 01-2119484630-38 ≥5 - ≤10 Flam. Liq. 3, H226 ATE [Oral] = 790 mg/kg [1]
EC: 200-751-6 Acute Tox. 4, H302
CAS: 71-36-3 Skin Irrit. 2, H315
Index: 603-004-00-6 Eye Dam. 1, H318
STOT SE 3, H335
STOT SE 3, H336
2,4,6-tris(dimethylaminomethyl) REACH #: 01-2119560597-27 ≥1 - ≤3 Acute Tox. 4, H302 ATE [Oral] = 1200 mg/kg [1]
phenol EC: 202-013-9 Skin Corr. 1C, H314
CAS: 90-72-2 Eye Dam. 1, H318
3,6-diazaoctanethylenediamin REACH #: 01-2119487919-13 <1 Acute Tox. 3, H311 ATE [Dermal] = 550 mg/kg [1]
EC: 203-950-6 Skin Corr. 1B, H314
CAS: 112-24-3 Eye Dam. 1, H318
Index: 612-059-00-5 Skin Sens. 1, H317
Aquatic Chronic 3, H412
toluene REACH #: 01-2119471310-51 <1 Flam. Liq. 2, H225 - [1] [2]
EC: 203-625-9 Skin Irrit. 2, H315
CAS: 108-88-3 Repr. 2, H361d
Index: 601-021-00-3 STOT SE 3, H336
STOT RE 2, H373
Asp. Tox. 1, H304
See Section 16 for the full text of the H statements declared
above.

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit, see section 8.

SECTION 4: First aid measures

4.1 Description of first aid measures

General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth
to an unconscious person.
If breathing is irregular, drowsiness, loss of consciousness or cramps: Call 112 and give immediate
treatment (first aid).
Eye contact : Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15
minutes, occasionally lifting the upper and lower eyelids. Seek immediate medical attention/advice.
Inhalation : Remove to fresh air and keep at rest in a position comfortable for breathing. Give nothing by mouth. If
not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. If unconscious, place in recovery position and get medical attention
immediately.
Skin contact : Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or
thinners. Remove contaminated clothing and shoes.

Version: 0.09 Page: 2/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 4: First aid measures

Ingestion : If swallowed, seek medical advice immediately and show this container or label. Keep person warm
and at rest. Do not induce vomiting unless directed to do so by medical personnel. Lower the head so
that vomit will not re-enter the mouth and throat.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that
fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing
apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or wear gloves.

4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : Causes serious eye damage.
Inhalation : Harmful if inhaled.
Skin contact : Causes skin irritation. May cause an allergic skin reaction.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
blistering may occur
Ingestion : Adverse symptoms may include the following:
stomach pains

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : If gasses have been inhaled, from the decomposition of the product, symptoms may be delayed. Treat
symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested
or inhaled.
Specific treatments : No specific treatment.

SECTION 5: Firefighting measures

5.1 Extinguishing media

Extinguishing media : Recommended: alcohol resistant foam, CO2, powders, water spray.
Not to be used: waterjet.

5.2 Special hazards arising from the substance or mixture

Hazards from the substance or Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a fire or if heated,
mixture : a pressure increase will occur and the container may burst, with the risk of a subsequent explosion.
This material is harmful to aquatic life with long lasting effects. Fire water contaminated with this
material must be contained and prevented from being discharged to any waterway, sewer or drain.
Hazardous combustion products : Decomposition products may include the following materials: carbon oxides nitrogen oxides

5.3 Advice for firefighters

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any
personal risk or without suitable training. Fire will produce dense black smoke. Exposure to decomposition products may cause a health
hazard. Cool closed containers exposed to fire with water. Do not release runoff from fire to drains or watercourses. Fire-fighters should
wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a
basic level of protection for chemical incidents.

Version: 0.09 Page: 3/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Avoid all direct contact with the spilled material. Exclude sources of ignition and be aware of explosion hazard. Ventilate the area. Avoid
breathing vapor or mist. Refer to protective measures listed in sections 7 and 8. No action shall be taken involving any personal risk or
without suitable training. If the product contaminates lakes, rivers, or sewers, inform the appropriate authorities in accordance with local
regulations.

6.2 Environmental precautions

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if
released in large quantities.

6.3 Methods and materials for containment and cleaning up

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses,
basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see Section 13). Use spark-proof tools and explosion-proof equipment. Contaminated absorbent material may pose the same
hazard as the spilled product.

6.4 Reference to other sections

See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.

SECTION 7: Handling and storage

7.1 Precautions for safe handling

Vapors are heavier than air and may spread along floors. Vapors may form explosive mixtures with air. Prevent the creation of flammable or
explosive concentrations of vapors in air and avoid vapor concentrations higher than the occupational exposure limits. In addition, the
product should be used only in areas from which all naked lights and other sources of ignition have been excluded. Electrical equipment
should be protected to the appropriate standard. To dissipate static electricity during transfer, ground drum and connect to receiving
container with bonding strap. No sparking tools should be used.
Avoid inhalation of vapour, dust and spray mist. Avoid contact with skin and eyes. Eating, drinking and smoking should be prohibited in area
where this material is handled, stored and processed. Appropriate personal protective equipment: see Section 8. Always keep in containers
made from the same material as the original one.

7.2 Conditions for safe storage, including any incompatibilities

Store in accordance with local regulations. Store in a cool, well-ventilated area away from incompatible materials and ignition sources.
Keep out of the reach of children. Keep away from: Oxidizing agents, strong alkalis, strong acids. No smoking. Prevent unauthorized
access. Containers that are opened must be carefully resealed and kept upright to prevent leakage.

7.3 Specific end use(s)

See separate Product Data Sheet for recommendations or industrial sector specific solutions.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational exposure limits
Product/ingredient name Exposure limit values

xylene EU OEL (Europe, 1/2022) [xylene, mixed isomers] Absorbed through skin.
TWA 8 hours: 50 ppm.
TWA 8 hours: 221 mg/m³.
STEL 15 minutes: 100 ppm.
STEL 15 minutes: 442 mg/m³.
ethylbenzene EU OEL (Europe, 1/2022) Absorbed through skin.
TWA 8 hours: 100 ppm.
TWA 8 hours: 442 mg/m³.
STEL 15 minutes: 200 ppm.
STEL 15 minutes: 884 mg/m³.
toluene EU OEL (Europe, 1/2022) Absorbed through skin.
TWA 8 hours: 192 mg/m³.
TWA 8 hours: 50 ppm.
STEL 15 minutes: 384 mg/m³.
STEL 15 minutes: 100 ppm.

Version: 0.09 Page: 4/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 8: Exposure controls/personal protection

Biological exposure indices
Product/ingredient name Exposure limit values

No exposure limit value known.

Recommended monitoring procedures

Reference should be made to monitoring standards, such as the following: European Standard EN 689 (Workplace atmospheres -
Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy)
European Standard EN 14042 (Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure
to chemical and biological agents) European Standard EN 482 (Workplace atmospheres - General requirements for the performance of
procedures for the measurement of chemical agents) Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Derived effect levels
Product/ingredient name Type - Population - Exposure Value Effects
xylene DNEL - Workers - Long term - Inhalation 77 mg/m³ Effects: Systemic
DNEL - Workers - Long term - Dermal 212 mg/kg bw/day Effects: Systemic
polymer of C18-unsatd. fatty acids dimers with DNEL - Workers - Long term - Inhalation 3.9 mg/m³ Effects: Systemic
tall-oil fatty acids and triethylenetetramine
DNEL - Workers - Long term - Dermal 1.1 mg/kg bw/day Effects: Systemic
ethylbenzene DNEL - Workers - Long term - Dermal 180 mg/kg bw/day Effects: Systemic
DNEL - Workers - Long term - Inhalation 77 mg/m³ Effects: Systemic
2,4,6-tris(dimethylaminomethyl)phenol DNEL - Workers - Long term - Inhalation 0.53 mg/m³ Effects: Systemic
DNEL - Workers - Long term - Dermal 0.15 mg/kg bw/day Effects: Systemic
3,6-diazaoctanethylenediamin DNEL - Workers - Long term - Dermal 0.57 mg/kg bw/day Effects: Systemic
DNEL - Workers - Long term - Inhalation 1 mg/m³ Effects: Systemic
toluene DNEL - Workers - Long term - Dermal 384 mg/kg bw/day Effects: Systemic
DNEL - Workers - Long term - Inhalation 192 mg/m³ Effects: Systemic
Predicted effect concentrations
Product/ingredient name Compartment Detail Value
xylene Fresh water 0.327 mg/l
Marine water 0.327 mg/l
Fresh water sediment 12.46 mg/kg
Marine water sediment 12.46 mg/kg
Soil 2.31 mg/kg
Sewage Treatment Plant 6.68 mg/l
polymer of C18-unsatd. fatty acids dimers with Fresh water 0.00434 mg/l
tall-oil fatty acids and triethylenetetramine
Marine water 0.000434 mg/l
Sewage Treatment Plant 3.84 mg/l
Fresh water sediment 434.02 mg/kg
Marine water sediment 43.4 mg/kg
Soil 86.78 mg/kg
ethylbenzene Fresh water 0.1 mg/l
Marine water 0.01 mg/l
Sewage Treatment Plant 9.6 mg/l
Fresh water sediment 13.7 mg/kg
Soil 2.68 mg/kg
2,4,6-tris(dimethylaminomethyl)phenol Fresh water 0.084 mg/l
Marine water 0.0084 mg/l
Sewage Treatment Plant 0.2 mg/l
3,6-diazaoctanethylenediamin Fresh water 190 µg/l
Fresh water sediment 95.9 mg/kg
Marine water 38 µg/l
Marine water sediment 19.2 mg/kg
Soil 19.1 mg/kg
Sewage Treatment Plant 4.25 mg/l
toluene Fresh water 0.68 mg/l
Marine water 0.68 mg/l
Sewage Treatment Plant 13.61 mg/l
Fresh water sediment 16.39 mg/kg
Marine water sediment 16.39 mg/kg
Soil 2.89 mg/kg

8.2 Exposure controls

Appropriate engineering controls

Version: 0.09 Page: 5/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 8: Exposure controls/personal protection

Arrange sufficient ventilation by local exhaust ventilation and good general ventilation to keep the airborne concentrations of vapors or dust
lowest possible and below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-
station location.
Individual protection measures
General : Gloves must be worn for all work that may result in soiling. Apron/coveralls/protective clothing must be
worn when soiling is so great that regular work clothes do not adequately protect skin against contact
with the product. Safety eyewear should be used when there is a likelihood of exposure.

Hygiene measures : Wash hands, forearms, and face thoroughly after handling compounds and before eating, smoking,
using lavatory, and at the end of day.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment
indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is
possible, the following protection should be worn, unless the assessment indicates a higher degree of
protection: chemical splash goggles and/or face shield. If inhalation hazards exist, a full-face
respirator may be required instead.
Hand protection : Wear chemically resistant gloves (tested to EN374) in combination with 'basic' employee training. The
quality of the chemical-resistant protective gloves must be chosen as a function of the specific
workplace concentrations and quantity of hazardous substances.
Since the actual work situation is unknown. Supplier of gloves should be contacted in order to find the
appropriate type. Below listed glove(s) should be regarded as generic advice:

Recommended: Silver Shield / Barrier / 4H gloves, polyvinyl alcohol (PVA), Viton®

May be used: nitrile rubber (>0.3 mm)
Short term exposure: neoprene rubber (>0.1 mm), butyl rubber (>0.5 mm), natural rubber (latex) (>0.4
mm), polyvinyl chloride (PVC), nitrile rubber (>0.1 mm), butyl rubber (>0.3 mm)

Body protection : Personal protective equipment for the body should be selected based on the task being performed and
the risks involved handling this product.
Wear suitable protective clothing. Always wear protective clothing when spraying.
Chemical-resistant apron.
Respiratory protection : When the product is applied by spraying and for continuous or prolonged work always wear an air-fed
respirator e.g. hood with supply of fresh or compressed air or a full face, powered air purifying filter.
Respirator selection must be based on known or anticipated exposure levels, the hazards of the
product and the safe working limits of the selected respirator. If working areas have insufficient
ventilation: When the product is applied by means that will not generate an aerosol such as, brush or
roller wear half or totally covering mask equipped with gas filter of type A, when grinding use particle
filter of type P. (EN140) Be sure to use an approved/certified respirator or equivalent.
Environmental exposure controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental
protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to
reduce emissions to acceptable levels.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

Physical state : Liquid.
Color : Transparent
Odor : Solvent-like
pH : Testing not relevant or not possible due to nature of the product.
Melting point/freezing point : Testing not relevant or not possible due to nature of the product.
Boiling point/boiling range : Testing not relevant or not possible due to nature of the product.
Flash point : Closed cup: 30°C (86°F)
Evaporation rate : Testing not relevant or not possible due to nature of the product.
Flammability : Highly flammable in the presence of the following materials or conditions: open flames, sparks and
static discharge and heat.
Vapor pressure : Vapor Pressure at 20˚C Vapor pressure at 50˚C

Ingredient name mm Hg kPa Method mm Hg kPa Method

ethylbenzene 9.30076 1.2

Vapor density : Not available.

Specific gravity : 0.92 g/cm³

Version: 0.09 Page: 6/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 9: Physical and chemical properties

Partition coefficient (LogKow) : Testing not relevant or not possible due to nature of the product.
Auto-ignition temperature : Ingredient name °C °F Method
butan-1-ol 355 671 EU A.15

Decomposition temperature : Testing not relevant or not possible due to nature of the product.
Viscosity : Aspiration hazard (H304) Not classified. Testing not relevant due to nature of the product.
Explosive properties : Explosive in the presence of the following materials or conditions: open flames, sparks and static
discharge and heat.
Oxidizing properties : Testing not relevant or not possible due to nature of the product.

9.2 Other information

Solvent(s) % by weight : Weighted average: 57 %
Water % by weight : Weighted average: 0 %
VOC content : 524.1 g/l
TOC Content : Weighted average: 456 g/l
Solvent Gas : Weighted average: 0.126 m³/l

SECTION 10: Stability and reactivity

10.1 Reactivity
No specific test data related to reactivity available for this product or its ingredients.

10.2 Chemical stability

The product is stable.

10.3 Possibility of hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

10.4 Conditions to avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat
or sources of ignition.

10.5 Incompatible materials

Highly reactive or incompatible with the following materials: oxidizing materials.
Reactive or incompatible with the following materials: reducing materials.

10.6 Hazardous decomposition products

When exposed to high temperatures (i.e. in case of fire) harmful decomposition products may be formed:
Decomposition products may include the following materials: carbon oxides nitrogen oxides

SECTION 11: Toxicological information

11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008

Exposure to component solvent vapor concentrations may result in adverse health effects such as mucous membrane and respiratory
system irritation and adverse effects on the kidneys, liver and central nervous system. Solvents may cause some of the above effects by
absorption through the skin. Symptoms and signs include headaches, dizziness, fatigue, muscular weakness, drowsiness and, in extreme
cases, loss of consciousness. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin, resulting
in non-allergic contact dermatitis and absorption through the skin. If splashed in the eyes, the liquid may cause irritation and reversible
damage. Accidental swallowing may cause stomach pain. Chemical lung inflammation may occur if the product is taken into the lungs via
vomiting.
Direct contact with the eyes can cause irreversible damage, including blindness.
Acute toxicity

Version: 0.09 Page: 7/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 11: Toxicological information

Product/ingredient name Result Dose / Exposure Effects

xylene Rabbit - Dermal - LD50 >4200 mg/kg
Rat - Oral - LD50 3523 mg/kg
Rat - Inhalation - LC50 Vapor 6350 ppm [4 hours]
Rat - Inhalation - LC50 Gas. 5000 ppm [4 hours]
ethylbenzene Rat - Oral - LD50 3500 mg/kg Toxic effects: Liver - Other changes
Kidney, Ureter, and Bladder - Other
changes
Rabbit - Dermal - LD50 >5000 mg/kg
butan-1-ol Rabbit - Dermal - LD50 3400 mg/kg Toxic effects: Eye - Corneal damage
Cardiac - Pulse rate Lung, Thorax, or
Respiration - Dyspnea
Rat - Oral - LD50 790 mg/kg Toxic effects: Liver - Fatty liver
degeneration Kidney, Ureter, and Bladder -
Other changes Blood - Other changes
Rat - Inhalation - LC50 Vapor 24000 mg/m³ [4 hours]
2,4,6-tris(dimethylaminomethyl) Rat - Oral - LD50 1200 mg/kg Toxic effects: Peripheral Nerve and
phenol Sensation - Flaccid paralysis without
anesthesia (usually neuromuscular
blockage) Lung, Thorax, or Respiration -
Dyspnea
Rat - Oral - LD50 2169 mg/kg
Rabbit - Dermal - LD50 1465 mg/kg
3,6-diazaoctanethylenediamin Rabbit - Dermal - LD50 550 mg/kg
Rat - Oral - LD50 1716 mg/kg
toluene Rat - Oral - LD50 636 mg/kg
Rat - Inhalation - LC50 Vapor >20 mg/l [4 hours]

Acute toxicity estimates

Product/ingredient name Oral Dermal Inhalation Inhalation Inhalation
mg/kg mg/kg (gases) (vapors) (dusts and
ppm mg/l mists)
mg/l
Hempel's Curing Agent 98021 8747.2 2746.4 10505.8 135.4
xylene 3523 1100 5000
ethylbenzene 3500 4500 11
butan-1-ol 790 3400 24
2,4,6-tris(dimethylaminomethyl)phenol 1200
3,6-diazaoctanethylenediamin 550

Irritation/Corrosion
Product/ingredient name Result Species Exposure
xylene Rabbit - Eyes - Severe irritant Duration of treatment/ Amount/concentration applied: 5
exposure: 24 hours milligrams
Rabbit - Skin - Moderate irritant Duration of treatment/ Amount/concentration applied: 500
exposure: 24 hours milligrams
Rabbit - Skin - Irritant
polymer of C18-unsatd. fatty acids Rabbit - Eyes - Severe irritant
dimers with tall-oil fatty acids and
triethylenetetramine
ethylbenzene Rabbit - Skin - Mild irritant Duration of treatment/ Amount/concentration applied: 15
exposure: 24 hours milligrams
Rabbit - Respiratory - Mild irritant
Rabbit - Eyes - Mild irritant
butan-1-ol Rabbit - Eyes - Severe irritant Duration of treatment/ Amount/concentration applied: 2
exposure: 24 hours milligrams
Rabbit - Skin - Moderate irritant Duration of treatment/ Amount/concentration applied: 20
exposure: 24 hours milligrams
2,4,6-tris(dimethylaminomethyl) Rabbit - Eyes - Severe irritant Duration of treatment/ Amount/concentration applied: 50
phenol exposure: 24 hours Micrograms
Rabbit - Skin - Severe irritant Duration of treatment/ Amount/concentration applied: 2
exposure: 24 hours milligrams
3,6-diazaoctanethylenediamin Rabbit - Eyes - Moderate irritant Duration of treatment/ Amount/concentration applied: 20
exposure: 24 hours milligrams
Rabbit - Skin - Severe irritant Duration of treatment/ Amount/concentration applied: 5
exposure: 24 hours milligrams
toluene Rabbit - Eyes - Mild irritant Duration of treatment/ Amount/concentration applied: 100
exposure: 0.5 minutes mg
Rabbit - Skin - Moderate irritant Duration of treatment/ Amount/concentration applied: 20 mg
exposure: 24 hours
Sensitizer

Version: 0.09 Page: 8/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 11: Toxicological information

Product/ingredient name Species - Route of exposure Result

polymer of C18-unsatd. fatty acids Mouse - skin Result: Sensitizing
dimers with tall-oil fatty acids and
triethylenetetramine
3,6-diazaoctanethylenediamin Guinea pig - skin Result: Sensitizing

Mutagenic effects
No known data avaliable in our database.

Carcinogenicity
No known data avaliable in our database.

Reproductive toxicity
No known data avaliable in our database.

Specific target organ toxicity (single exposure)

Product/ingredient name Category Route of exposure Target organs
butan-1-ol Category 3 Respiratory tract irritation
Category 3 Narcotic effects
toluene Category 3 Narcotic effects

Specific target organ toxicity (repeated exposure)

Product/ingredient name Category Route of exposure Target organs
ethylbenzene Category 2 - hearing organs
toluene Category 2 - -
Aspiration hazard
Product/ingredient name Result
ethylbenzene ASPIRATION HAZARD - Category 1
toluene ASPIRATION HAZARD - Category 1

Information on the likely routes of exposure

Routes of entry anticipated: Oral, Dermal, Inhalation.
Potential chronic health effects
No known significant effects or critical hazards.

11.2 Information on other hazards

Endocrine disrupting properties : The product does not meet the criteria to be considered as having endocrine disrupting properties
according to the criteria set out in either Regulation (EC) No. 1907/2006 or Regulation (EC) No
1272/2008.
Other information : No additional known significant effects or critical hazards.

SECTION 12: Ecological information

12.1 Toxicity
Do not allow to enter drains or watercourses. Harmful to aquatic life with long lasting effects.
Product/ingredient name Result Species Exposure
polymer of C18-unsatd. fatty acids Acute - LC50 Fish 7.07 mg/l [96 hours]
dimers with tall-oil fatty acids and
triethylenetetramine
Acute - EC50 Daphnia 7.07 mg/l [48 hours]
Acute - EC50 Algae 4.34 mg/l [72 hours]
ethylbenzene Chronic - NOEC - Fresh water Algae - Green algae - Pseudokirchneriella <1000 µg/l [96 hours]
subcapitata
butan-1-ol Acute - LC50 Fish 1.376 mg/l [96 hours]
Acute - EC50 Daphnia 1328 mg/l [96 hours]
2,4,6-tris(dimethylaminomethyl) Acute - EC50 Algae 84 mg/l [72 hours]
phenol
Acute - LC50 Fish 175 mg/l [96 hours]
3,6-diazaoctanethylenediamin Acute - EC50 Daphnia 31.1 mg/l [48 hours]
Acute - EC50 Algae 20 mg/l [72 hours]
Acute - LC50 Fish 330 mg/l [96 hours]
toluene Chronic - NOEC - Fresh water Daphnia - Water flea - Daphnia magna 1000 µg/l [21 days]
Chronic - NOEC - Fresh water Algae - Green algae - Pseudokirchneriella <500000 µg/l [96 hours]

Version: 0.09 Page: 9/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 12: Ecological information

subcapitata

12.2 Persistence and degradability

Product/ingredient name Test Result
xylene >60% [28 days] - Readily
OECD Ready Biodegradability - Manometric 90 - 98% [28 days] - Readily
Respirometry Test
polymer of C18-unsatd. fatty acids OECD Ready Biodegradability - Closed Bottle Test 15% [28 days] - Not readily
dimers with tall-oil fatty acids and
triethylenetetramine
ethylbenzene >70% [28 days] - Readily
butan-1-ol OECD Ready Biodegradability - Closed Bottle Test 92% [20 days]
2,4,6-tris(dimethylaminomethyl) OECD Ready Biodegradability - Closed Bottle Test 4% [28 days] - Not readily
phenol
toluene 100% [14 days] - Readily

Product/ingredient name Aquatic half-life Photolysis Biodegradability

xylene Readily
polymer of C18-unsatd. fatty acids Not readily
dimers with tall-oil fatty acids and
triethylenetetramine
ethylbenzene Readily
butan-1-ol Readily
2,4,6-tris(dimethylaminomethyl) Not readily
phenol
toluene Readily

12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
xylene 3.12 8.1 - 25.9 Low
polymer of C18-unsatd. fatty acids dimers with tall-oil fatty acids 10.34 1.89 Low
and triethylenetetramine
ethylbenzene 3.6 - Low
butan-1-ol 1 3.16 Low
2,4,6-tris(dimethylaminomethyl)phenol 0.219 - Low
3,6-diazaoctanethylenediamin -1.66 - -1.4 - Low
toluene 2.73 90 Low

12.4 Mobility in soil

Soil/Water partition coefficient
Product/ingredient name logKoc Koc

xylene 1.59 39
ethylbenzene 2.23 170.406
butan-1-ol 0.51 3.22078
2,4,6-tris(dimethylaminomethyl)phenol 2.72 525.589
3,6-diazaoctanethylenediamin 1.53 33.6474
toluene 2.07 117.115
Results of PMT and vPvM assessment
Product/ingredient name PMT P M T vPvM vP vM

xylene No No Yes No No No Yes

polymer of C18-unsatd. fatty acids dimers with tall-oil fatty acids No No No No No No No
and triethylenetetramine
ethylbenzene No No Yes Yes No No No
butan-1-ol No No Yes No No No Yes
2,4,6-tris(dimethylaminomethyl)phenol No No Yes No No No No
3,6-diazaoctanethylenediamin No No Yes No No No Yes
toluene No No Yes Yes No No No
Mobility : The product does not meet the criteria to be considered as a PMT or vPvM.

12.5 Results of PBT and vPvB assessment

Regulation (EC) No. 1907/2006 [REACH]

Version: 0.09 Page: 10/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 12: Ecological information

Product/ingredient name PBT P B T vPvB vP vB

xylene No No No No No No No
polymer of C18-unsatd. fatty acids dimers with tall-oil fatty acids No No No No No No No
and triethylenetetramine
ethylbenzene No No No Yes No No No
butan-1-ol No No No No No No No
2,4,6-tris(dimethylaminomethyl)phenol No No No No No No No
3,6-diazaoctanethylenediamin No No No No No No No
toluene No No No Yes No No No
Regulation (EC) No. 1272/2008 [CLP]
Product/ingredient name PBT P B T vPvB vP vB

xylene No No No No No No No
polymer of C18-unsatd. fatty acids dimers with tall-oil fatty acids No No No No No No No
and triethylenetetramine
ethylbenzene No No No Yes No No No
butan-1-ol No No No No No No No
2,4,6-tris(dimethylaminomethyl)phenol No No No No No No No
3,6-diazaoctanethylenediamin No No No No No No No
toluene No No No Yes No No No
Conclusion/Summary : The product does not meet the criteria to be considered as a PBT or vPvB.

12.6 Endocrine disrupting properties

The product does not meet the criteria to be considered as having endocrine disrupting properties according to the criteria set out in either
Regulation (EC) No. 1907/2006 or Regulation (EC) No 1272/2008.
12.7 Other adverse effects
No known significant effects or critical hazards.

SECTION 13: Disposal considerations

13.1 Waste treatment methods

The generation of waste should be avoided or minimized wherever possible. Residues of the product is listed as hazardous waste. Dispose
of according to all state and local applicable regulations. Waste should not be disposed of untreated to the sewer unless fully compliant with
the requirements of all authorities with jurisdiction. Spillage, remains, discarded clothes and similar should be discarded in a fireproof
container.
European waste catalogue no. (EWC) is given below.
European waste catalogue (EWC) : 08 01 11*
Packaging
The generation of waste should be avoided or minimized wherever possible. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible.

SECTION 14: Transport information

Transport may take place according to national regulation or ADR for transport by road, RID for transport by train, IMDG for transport by
sea, IATA for transport by air.
14.1 14.2 14.3 14.4 14.5
UN / ID no. Proper shipping name Transport hazard class(es) PG* Env* Additional information

ADR/RID UN1263 PAINT 3 III No. Tunnel code (D/E)

Class

IMDG UN1263 PAINT 3 III No. Emergency schedules

Class F-E, S-E

IATA UN1263 PAINT 3 III No. -

Class

PG* : Packing group

Env.* : Environmental hazards

14.6 Special precautions for user

Version: 0.09 Page: 11/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 14: Transport information

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the
product know what to do in the event of an accident or spillage.
14.7 Maritime transport in bulk according to IMO instruments
Not applicable.

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorization - Substances of very high concern
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Other EU regulations
Seveso category This product is controlled under the Seveso III Directive.
Seveso category
P5c: Flammable liquids 2 and 3 not falling under P5a or P5b

15.2 Chemical Safety Assessment

-

SECTION 16: Other information

Abbreviations and acronyms : ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008]
EUH statement = CLP-specific Hazard statement
RRN = REACH Registration Number
DNEL = Derived No Effect Level
PNEC = Predicted No Effect Concentration
Full text of abbreviated H statements : H225 Highly flammable liquid and vapor.
H226 Flammable liquid and vapor.
H302 Harmful if swallowed.
H304 May be fatal if swallowed and enters airways.
H311 Toxic in contact with skin.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H361d Suspected of damaging the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
Full text of classifications [CLP/GHS] : Acute Tox. 3 ACUTE TOXICITY - Category 3
Acute Tox. 4 ACUTE TOXICITY - Category 4
Aquatic Chronic 2 AQUATIC HAZARD (LONG-TERM) - Category 2
Aquatic Chronic 3 AQUATIC HAZARD (LONG-TERM) - Category 3
Asp. Tox. 1 ASPIRATION HAZARD - Category 1
Eye Dam. 1 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1
Flam. Liq. 2 FLAMMABLE LIQUIDS - Category 2
Flam. Liq. 3 FLAMMABLE LIQUIDS - Category 3
Repr. 2 TOXIC TO REPRODUCTION - Category 2
Skin Corr. 1B SKIN CORROSION/IRRITATION - Category 1B
Skin Corr. 1C SKIN CORROSION/IRRITATION - Category 1C
Skin Irrit. 2 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1 SKIN SENSITIZATION - Category 1
Skin Sens. 1A SKIN SENSITIZATION - Category 1A
STOT RE 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2
STOT SE 3 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) - Category 3

Version: 0.09 Page: 12/13

Safety Data Sheet
Hempel's Curing Agent 98021

SECTION 16: Other information

Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]

Classification Justification
FLAMMABLE LIQUIDS On basis of test data
ACUTE TOXICITY (inhalation) Calculation method
SKIN CORROSION/IRRITATION Calculation method
SERIOUS EYE DAMAGE/ EYE IRRITATION Calculation method
SKIN SENSITIZATION Calculation method
AQUATIC HAZARD (LONG-TERM) Calculation method

Notice to reader
Indicates information that has changed from previously issued version.
The information contained in this safety data sheet is based on the present state of knowledge and EU and national legislation. It provides
guidance on health, safety and environmental aspects for handling the product in a safe way and should not be construed as any guarantee
of the technical preformance or suitability for particular applications.
It is always the duty of the user/employer to ascertain that the work is planned and carried out in accordance with the national regulations.

Version: 0.09 Page: 13/13