CAR SOLUTIONS

CONTENTS

A/C system
On-board Emissions
Diagnostics diagnostics and
diagnostics diagnostics
recharging
page 4 page 30 page 36 page 38

2
 CAR Solutions

The worldwide diagnostics specialists

For twenty years now TEXA has been synonymous with automotive diagnostics all over world, with
products covering electronic and electrical diagnostics, exhaust gas emissions control and vehicle air-
conditioning diagnostics and recharging. TEXA has progressively developed an extraordinary worldwide
network, with around 700 distributors operating in almost 100 countries.

Complete and modular offering

TEXA offers automotive technicians complete support during all stages of vehicle repairs: from analysis
of fault symptoms, to identification of the right spare part. TEXA guarantees un unrivalled offering of
tools and services that meet all customer requirements:

Autodiagnostics tools, Operating software that’s Customer service through

on-board diagnostics, always updated with vast call centers, online repair
electrical diagnostics, databases of diagnostics, support and an extensive
emissions diagnostics, technical and service in- database of solutions.
air-conditioning system formation.
diagnostics and mainte-
nance.

Specialist training through courses for automotive technicians

and students of professional and technical training institutes.

Just one display tool can be used to manage all types of diagnostics operations, on-board diagnostics,
electrical diagnostics, emissions diagnostics and air-conditioning diagnostics. That’s not all: with the
introduction of “Apps”, additional services can be made available for immediate access to exclusive
functions, ensuring a unique vehicle servicing experience.
3
Diagnostics solutions

A highly efficient
professional partner,
an essential workmate.

4
 CAR Solutions

TEXA provides diagnostics solutions for five different sectors: CAR, TRUCK,
BIKE, OFF-HIGHWAY (AGRI and CONSTRUCTION) and MARINE, and within
each of these offers unrivalled coverage of makes and models, ranging from
European to Asian and US vehicles, managed by a worldwide development
team.
TEXA has developed IDC4 CAR (specific software platform for cars and light
commercial vehicles), for managing all routine workshop operations.
This software provides: diagnostics resources, a database with interactive
wiring diagrams, detailed system and component datasheets, technical
bulletins and mechanical data. It is constantly updated by the TEXA
technicians who work in the field every day, so as to extend and increase
the number of makes/vehicles our diagnostics solutions can be used on,
both the latest models and older versions. Product development exploits the
continuous feedback received from automotive technicians, who in order to
provide autodiagnostics services require accurate and up-to-date technical
documents.

IDC4 VEHICLE COVERAGE

CARS AND LIGHT COMMERCIAL VEHICLES

ABARTH GONOW MERCEDES-BENZ VAZ
ACURA GREAT WALL MG VICTORIA GIOTTI
AGRALE HONDA MINI VOLKSWAGEN
ALFA ROMEO HUMMER MITSUBISHI VOLVO
ASTON MARTIN HYUNDAI NISSAN
AUDI IKCO OPEL (GM)
AUTOBIANCHI INFINITI PERODUA SUPERCAR
BEDFORD INNOCENTI PEUGEOT ALFA ROMEO
BIGAS ISUZU PIAGGIO BENTLEY
BMW IVECO RENAULT CHEVROLET
BSI VEICOLI JAGUAR RENAULT SAMSUNG DODGE
CADILLAC JEEP ROVER FERRARI
CHERY KATAY SAAB LAMBORGHINI
CHEVROLET KIA SCION MASERATI
CHRYSLER LADA SEAT MORGAN
CITROËN LANCIA SKODA PAGANI
DACIA LAND ROVER SMART PORSCHE
DAEWOO LANDI RENZO SOLLERS FIAT
DAIHATSU LDV SPERANZA
DODGE LEXUS SSANGYONG
DR LOTUS SUBARU
FAW MAHINDRA SUZUKI
FIAT MARUTI TATA
FORD MAYBACH TOYOTA
GAZ MAZDA UAZ

5
Unbeatable autodiagnostics
Autodiagnostics are the heart of the system, the main function required by technicians for efficient
servicing. It is also the area where TEXA has focused its extensive know-how.
The TEXA IDC4 autodiagnostics environment provides direct access to individual functions, such as
reading parameters and system status, reading errors, activation of individual components to check
operation, and setting and calibration functions.

ERROR screen listing the faults/malfunctions saved

in the ECU, with a detailed description of each one.

PARAMETER/STATUS screen showing the inputs and outputs

managed by the ECU, displayed in numeric format and on graphs.

SETTINGS screen, offering the possibility to run

the calibration, initialisation and programming fun-
ctions required by the system, thus completing any
repairs.

ACTIVATIONS screen, with functions for testing the components.

6
 CAR Solutions

Vehicle search by VIN

“SOLVED PROBLEMS”
powered by Google* This extremely useful function lets you identify
the model of the vehicle you are diagnosing
This extraordinary function rapidly and accurately on the basis of its VIN
on IDC4 allows automotive number. Vehicle searches can be performed
technicians, via an internet in two ways:
connection and exploiting
Google search technology, to access the 1. “VIN SCAN”:
TEXA troubleshooting database, containing With the diagnostic tool connected to
solutions found by technicians all over the the vehicle’s OBD socket, this function
world and collected by TEXA’s international automatically retrieves the VIN and selects
call centres. the exact model of vehicle in IDC4 software.
The procedure is very simple and intuitive:
once having selected the vehicle being 2. MANUAL SEARCH:
serviced, the technician can send a request If the “VIN SCAN” function fails to retrieve the
by typing in a description of the problem, then VIN automatically, you can enter it manually
receiving the solution in just a few seconds. to identify the model you are working on.
IDC4 also lets you perform vehicle searches
by entering the engine number or registration
number. Searches performed using these
methods are limited to vehicles already
present in IDC4’s “Customer Management”
database.

*
Optional

7
TGS3s function
TGS3s (TEXA Global Scan 3) is an innovative function that automatically scans all
diagnosable* electronic control units on a vehicle in a matter of seconds.

In addition to being super-fast in accessing and automatically recognising different ECUs,

as soon as the scan ends and results have been processed, TGS3s displays all the errors
detected on the vehicle along with codes and descriptions, and allows errors to be cancelled with a
single click. A soon as the results of the scan become available, you can select any control unit from the
list to run an autodiagnostic test on it. This important new function makes diagnostic operations easier
than ever and can even display and print a detailed scan report to deliver to the customer.

The following table shows the number of ECUs installed and the TGS3s scan time for some of the most
popular vehicles currently in circulation.

Make & model ECUs installed TGS3s scan time

Alfa Mito 1.6 JTDm 18 38 seconds

Fiat Stilo 1.9 JTD 35 80 seconds

TGS2 TGS3s
Ford Focus 1.6i Petrol 33 30 seconds

Toyota Avensis 2.2 Diesel 28 28 seconds

Volkswagen Golf V 1.6 Petrol 36 46 seconds Scan speed

Control unit recognised,

and error/s detected

Control unit
not recognised

Control unit recognised,

no error/s detected

Control unit not found

TGS3s scanning may not function with older models of vehicle since previous generation control units may not support
the latest scanning functionalities.

8
 CAR Solutions

Unrivalled coverage
Vehicle diagnostics is TEXA’s core business. To keep ahead of the competition, TEXA is committed to
offering its customers the best possible coverage of vehicles in circulation. The various teams operating
in TEXA’s European subsidiaries have recently been complemented by new teams working directly in
Asia to ensure prompt and accurate coverage for Japanese, Korean, Chinese and Indian vehicles. This
network guarantees customers all over the world unrivalled coverage in terms of the number of vehicles
covered and the quality of the coverage provided.

Over 400.000
diagnostic options.
An impressive figure indeed! TEXA’s excellent coverage puts you in the ideal position to be able to
handle even the most the difficult workshop tasks. Regular updates are guaranteed by subscription to
TEXPACK.

You can now visit a brand new portal to learn more about the diagnostic capabilities of IDC4
software even if you are not already a TEXA customer. To find out more, simply go to:
www.texa.com/coverage.

This extremely useful portal lets you select

your diagnostic environment, the type and the
brand of vehicle you are interested in. Once
you have done so, you can view a complete
and constantly up-to-date application list with
information on models, engines, systems and
the diagnostic functions available for that
specific vehicle.

9
Total coverage, extraordinary functions
Airbag Errors

Parking help Parameter

Alarm Status

Body computer Settings

Sunroof ECU Activations

Windshield wiper ECU Self-diagnosis help

Rescue call Wiring diagrams

Doors locking Mechanical data

Recording of the diagnosis

Cabin control
session (Rec & Play)

Distance control Scheduled maintenance

Steering stalk Component location

Steering wheel electronics Printouts

Database and log of

Driver side door
customers/works

Passenger side door Spare parts management

and many other... and many other...

10
 CAR Solutions

Exclusive functions to AXONE 4 and IDC4 PREMIUM

Exclusive to AXONE 4, the software comes with important new features that provide concrete support
for the everyday work of automotive technicians. IDC4 PREMIUM has updated and very user-friendly
graphics, with the menu divided into five scrolling screens for direct access (Diagnostics, Data,
Measurements, myTEXA APP, Settings).

Via the Diagnostics menu, users can also access

the “Special Functions” for carrying out frequent
procedures, such as Program Keys/Keyless
Remotes, Regenerate Particulate Filter, Change
Dashboard Language, Replace Battery, Brake
pad replacement.

Using the “Remote Assistance” function, when needed TEXA personnel can establish
a remote connection to the tool and see exactly what is happening with the customer’s
vehicle.

The Data menu contains useful information for accessing vehicle technical data
and locating components. One special application, the “Manufacturer Link”, is
particularly useful as it allows direct access to all the technical information provided by
manufacturers relating to the vehicle’s original equipment.

11
The App concept*
Electronics are becoming increasingly common on modern vehicles, spreading to components that
not so long ago were simply mechanical. This has created a situation in which new requirements arise
due to diversification of the services offered by automotive technicians and the evolution of customer
vehicle fleets.
As a consequence, automotive technicians need to carry out a much vaster range of procedures,
making it harder to choose the best diagnostics tools and subscription services for their
workshop. To meet these new requirements, TEXA not only provides
traditional subscriptions and upgrade options, but also an innovative
diagnostic “App” concept, inspired by the world of consumer
electronics.

From the IDC4 main menu, customers can now access the TEXA APP, offering a list of Apps available:
functions that are not available for the customer’s profile are identified by a darker icon.
To order any of these Apps, customers can simply click the icon, opening a simple and user-friendly
procedure to order the App from the reseller and install it on their tool.

12
 CAR Solutions

As well as functions available on payment, free applications will also be provided, either by TEXA directly
or its partners. TEXA has introduced this new concept as a way of offering automotive technicians the
possibility to develop a modular tool that reflects their professional development, implementing new
functions and upgrades at any time.
*
Check the availability of TEXA Apps for your tool.

13
Multibrand diagnostics
AXONE S

AXONE S is designed to satisfy the latest maintenance needs that have emerged as a result of constant evolution in
electronics, affecting all vehicle components. Today, not just mechanics but tyre fitters, suspension tuners, FAST-FIT
centres and even service station operators have to be able to interface with and diagnose electronic systems.
AXONE S is TEXA’s first Multiutility tool, and is currently available in DIAGNOSIS, FAST-FIT, and TPS configurations,
with others due to be added in future. Specialists can therefore choose the tool most appropriate to their needs.

DIAGNOSIS Utility: satisfies the demand for a diagnostic system that is simple to use but still incorporates all the
basic functions of IDC4 software (TGS3s, SCAN VIN, “SOLVED PROBLEMS”, EOBD Scan Tool, etc.). This version is
also ideal for garages who need a second diagnostic tool to complement their main tool or a personal tool for each
mechanic. This configuration includes IDC4a DIAGNOSIS software.
FAST-FIT Utility: permits users to perform essential repair and maintenance tasks on the braking system, air
conditioning system, starting system, steering and steering column systems, instrumentation, lights and even
certain engine functions. This version also performs extremely useful service resets. This configuration includes
IDC4a FAST-FIT software.
TPS Utility: ideal for tyre fitters who need a tool capable of performing operations connected with the TPMS system,
including the reprogramming of control units. TPMS becomes obligatory in Europe from 1st November 2014. This
configuration includes TPS KEY and IDC4a TPS software.

COMPATIBLE DIAGNOSIS PRODUCTS

NAVIGATOR
TPS KEY
NANO S

14
CAR Solutions

15
Multibrand diagnostics
AXONE 4 Mini

The AXONE 4 Mini is a compact diagnostic tool that incorporates most of the extraordinary functions that have made
the AXONE 4 tablet such a success.
Its refined styling is centred on a generous 7 inch resistive touch screen offering a record resolution of 800x1280. Its
Cortex A8 processor is amazingly fast and completes tasks in only half the time taken by the previous generation of
tools.
Thanks to its incredible versatility, mechanics will enjoy using the AXONE 4 Mini for many years to come and keeping
abreast of the latest developments in vehicle electronics.
The dedicated IDC4 PM software ensures superb usability based on swipe screens as used by today’s most popular
consumer electronic products. Navigating through the various diagnostic functions has never been so easy and
intuitive. A Bluetooth module ensures easy communication with TEXA interfaces while a Wi-Fi card provides internet
connectivity. As with all TEXA products, the AXONE 4 Mini is extremely robust, as proven by its homologation to
military standard 810F and its IP42 protection rating. In short, the AXONE 4 Mini is a tough and practical tool for
challenging workshop environments, with the added benefit of a protected operating system.

By installing TPS KEY, AXONE 4 Mini allows you to complete all the operations related to the electronic TPMS Tyre
Pressure Monitoring System, which is mandatory starting in Europe from November 1st 2014, such as the tyre
replacement, rotation and crossing, the replacement of the valve’s sensor.

COMPATIBLE DIAGNOSIS PRODUCTS

NAVIGATOR NAVIGATOR NAVIGATOR

TWINPROBE UNIPROBE GASBOX OPABOX RC3 RC2 TPS KEY
NANO S TXTs TXC

16
CAR Solutions

17
Multibrand diagnostics
AXONE 4
AXONE 4 Docking Station
with steering wheel clip

AXONE 4 classic Docking

Station for TEXA bench or
trolley

Handle

Adjustable support, to
be used with classic
Docking Stations for DIAG
STATION, ECO STATION
and Economy trolleys

DVD drive for AXONE 4

Cover

Bag

Tool case

AXONE 4 is a tool designed especially to solve all problems that may occur
both inside and outside the workshop. It can withstand knocks, falls, mud
and dust, and is compliant with military standard MIL STD 810F. AXONE 4
communicates with all TEXA diagnostic interfaces via Bluetooth. It can
connect to the workshop’s network over a Wi-Fi link to download the latest
database updates, or use a smartphone to connect to the internet if you are
away from the workshop. AXONE 4 also has a remote assistance function to
allow TEXA’s experts to connect remotely and see exactly what is happening
with the customer’s vehicle.
The DUAL MODE function also allows simultaneous connection to two EXCLUSIVE
different interfaces, so that you can run autodiagnostics on one component FOR AXONE 4
while monitoring the signal of another on the oscilloscope, for example.
By installing TPS KEY, AXONE 4 allows you to complete all the operations IDC4 PREMIUM software
related to the electronic TPMS Tyre Pressure Monitoring System, which with special functions for
is mandatory starting in Europe from November 1st 2014, such as the tyre faster access to the desired
replacement, rotation and crossing, the replacement of the valve’s sensor. applications.

COMPATIBLE DIAGNOSIS PRODUCTS

NAVIGATOR NAVIGATOR NAVIGATOR

OBD MATRIX TWINPROBE UNIPROBE GASBOX OPABOX RC3 RC2 TPS KEY
NANO S TXTs TXC

18
CAR Solutions

19
Multibrand diagnostics
Navigator nano S

Navigator Nano S is a latest generation vehicle interface from TEXA that lets you run all kinds of diagnostics on cars,
light commercials, motorcycles, scooters, quads and jetskis.
Every aspect of the Navigator Nano S has been carefully designed and developed to fully satisfy the needs of the
modern garage and to allow mechanics to complete all diagnostic tests quickly and easily.
This compact, lightweight and ergonomic interface is designed to function simply and automatically with TEXA’s
latest generation display units like the AXONE 4, AXONE 4 Mini, AXONE S and MULTI PEGASO.
Using a special adapter and brand-specific cables, the Navigator Nano S can diagnose vehicles with an OBD socket
and even pre-OBD and BIKE vehicles.

Note: Always check what adapter cables are needed to connect the tool to specific vehicles and verify diagnostic
compatibility with motorcycles.

COMPATIBLE DIAGNOSIS PRODUCTS

AXONE 4 MULTI
AXONE 4 AXONE S
MINI PEGASO

20
 CAR Solutions

Multibrand diagnostics
NAVIGATOR TXC

NAVIGATOR TXC is an advanced diagnostics interface for running autodiagnostics tests and displaying engineering
parameters and system status, activating components and performing settings and configurations, including resetting
maintenance, service and airbag indicator lights, configuring electronic control units, keys and keyless remotes. It
connects via Bluetooth to AXONE 4, AXONE 4 Mini, MULTI PEGASO or to a stand-alone PC. NAVIGATOR TXC is the
result of TEXA’s ongoing commitment to finding solutions that can simplify the work of automotive technicians and
ensure highly practical use.

NAVIGATOR TXC is compatible with the PASS-THRU protocol*, which allows any workshop to connect to each
manufacturer’s central server and download software packages or official technical information. The PASS-THRU
function can be used whenever needing to update the software on one or more electronic control units, in the event
of malfunctions.

*
Go to www.texa.com/passthru to verify compatibility and the functions made available by individual vehicle makers.

COMPATIBILITY

AXONE 4 MULTI WINDOWS

AXONE 4
MINI PEGASO PC

21
Multibrand diagnostics
NAVIGATOR TXTs

NAVIGATOR TXTs 26 pin is a powerful multibrand diagnostics and autodiagnostics tool that connects directly to the
vehicle’s diagnostic socket, and communicates via Bluetooth with the AXONE 4, AXONE 4 Mini and MULTI PEGASO
display units, or alternatively with a Windows PC. Wireless connectivity means users can carry out diagnostics testing
while being free to move around the vehicle and workshop.

NAVIGATOR TXTs can perform all common autodiagnostics tests, including: read and clear errors, display
engineering parameters and activation status, set and configure oil change, service and airbag indicator light reset,
ECU configuration, keys and remote controls. NAVIGATOR TXTs is compatible with the PASS-THRU protocol*, which
allows any workshop to connect to each manufacturer’s central server and download software packages or official
technical information. The PASS-THRU function can be used whenever needing to update the software on one or
more electronic control units, in the event of malfunctions.

*
Go to www.texa.com/passthru to verify compatibility and the functions made available by individual vehicle makers.

COMPATIBILITY

AXONE 4 MULTI WINDOWS

AXONE 4
MINI PEGASO PC

22
CAR Solutions

23
Diagnostics for
tyre specialists and
FAST-FIT centres

European legislation requires that from 1st November 2014, all vehicles destined
for the transport of passengers must be equipped as standard with TPMS
(Tyre Pressure Monitoring System).
TEXA has developed two solutions: a classic one, TPS, and a “plus” solution,
the AXONE S TPS. The AXONE S TPS is able to diagnose malfunctions in
the pressure monitoring system and dashboard warning light circuits and
handle all the other tyre-related operations tyre fitters have to deal with on a
daily basis, including tyre changes, summer/winter tread pattern changes and
regular tyre rotations.

24
CAR Solutions

25
Diagnostics for tyre specialists and FAST-FIT centres
TPS

TPS is the basic TEXA tool for tyre-related operations. It boasts an exceptional coverage of makes and models as
well as TEXA’s traditionally robust design and build quality.
Functioning is extremely simply: all you have to do is select the vehicle and TPS dialogues automatically with the
valve sensors. Moving the tool closer to the sensors allows you to activate them and check their efficiency even if
they are in stand-by mode. The tool’s own display reads out pressure, temperature and battery charge level (where
available), as well as the relevant identification codes and all other diagnostic information provided by the vehicle
manufacturer. The procedure is facilitated by a highly intuitive menu that guides you through the various options step
by step. TPS allows tyre fitters to check the condition of TPMS sensors and replace them if necessary.
If the original valve is replaced by a universal model, TPS can even program the new valve to assign it the same
identification code as the old one and link it to the receiver or vehicle control unit.
TPS also uses its radio link capabilities to provide a valuable accessory function: the tool can dialogue with remote
control systems for door opening checking the battery charge level.

26
 CAR Solutions

Diagnostics for tyre specialists and FAST-FIT centres

AXONE S TPS

AXONE S TPS is the TEXA Multiutility solution that lets you dialogue with a vehicle’s TPMS system and connect to
the OBD socket to reprogram tyre pressure control units. In many vehicles, especially the latest models, the TPMS
control unit has to be reprogrammed every time a tyre is changed or tyres are rotated, summer/winter tread types
are changed or faulty sensors are replaced.
AXONE S TPS is the best solution currently available and allows tyre fitters to perform all tyre-related operations and
dialogue with the systems of all vehicle manufacturers. Simplicity is guaranteed by the Android™ operating system,
which follows you step by step, and provides instant access to all menus.
Among the many advantages of this great tool are its robust design and solid build and a superb 5 inch colour
capacitive touch screen that clearly displays all available functions and data.
Thanks to the Multiutility design of AXONE S, you can even install additional functions, adding FAST-FIT functionality
to the initial TPS configuration, for example. In this way you can use the same tool to set up steering angle sensors,
replace brake pads, adjust the height of electronic suspension systems, perform a range of tasks on the air
conditioning, starting, instrument and lighting systems, adjust certain engine functioning parameters and perform
service resets – an extremely useful function. With the DIAGNOSIS utility AXONE S becomes a simple diagnostic tool
but extremely effective.

COMPATIBLE DIAGNOSIS PRODUCTS

NAVIGATOR
NANO S

27
Electrical diagnostics
TwinProbe

TwinProbe is the TEXA tool for acquiring the analogue and digital
measurements needed for all conventional diagnostic testing. It comes at a
lower price than UNIProbe, its “big brother”, however both share in common
outstanding practicality and precision for all automotive service operations. It
communicates with all TEXA display units or a Windows PC, either via a USB
connection or over a Bluetooth wireless link. The tool can be managed by
the IDC4 operating software, or MSS (Measurement System Software) when
used on a PC.

TwinProbe includes:
• Oscilloscope: two independent analogue channels, with inputs up to ± 200V,
complete with SIV function for interpreting the measured signal.
• Signal generator: for simulating the pulses generated by sensors and the
commands generated by control units and for testing solenoid valves, for
example.
• Ammeter: for measuring electric current intensity. A BICOR clamp-on
ammeter is needed to allow TwinProbe to run these tests.

COMPATIBILITY

AXONE 4 MULTI WINDOWS

AXONE 4
MINI PEGASO PC

28
 CAR Solutions

Electrical diagnostics
UNIProbe

UNIProbe is a device for acquiring the analogue and digital measurements

needed for all conventional diagnostic testing. It communicates with all TEXA
display units or a Windows PC, either via a USB connection or over a Bluetooth
wireless link. An internal lithium battery guarantees excellent autonomy. The
tool can be managed by the IDC4 operating software, or MSS (Measurement
System Software) when used on a PC.

Incorporates six different tools in the one unit:

• Oscilloscope: four independent analogue channels, complete with SIV
function for interpreting the measured signal.
• Battery Probe: for testing the battery, as well as analysing and checking the
entire starting and charging system.
• TNET: for measurement and electrical analysis of CAN automotive
communication networks.
• Signal generator: for simulating the pulses generated by sensors and the
commands generated by control units and for testing solenoid valves, for
example.
• Multimeter: for voltage, resistance and current measurements (using a
clamp-on ammeter).
• Pressure tester: for checking fuel supply and turbocharger pressure on all
vehicles.

COMPATIBILITY

AXONE 4 MULTI WINDOWS

AXONE 4
MINI PEGASO PC

29
On-board
diagnostics tools

The increasingly widespread use of electronic systems on vehicles involves

a number of critical issues relating to sporadic or intermittent problems
that only occur in certain driving conditions and that, if not promptly solved,
may undermine the automotive technician’s credibility and professionalism.
Moreover, diagnostics can only be performed on some more recent electronic
systems when the vehicle is moving. To respond to these needs, TEXA has
developed OBD Log and OBD MATRIX, two mini-tools which have revolutionised
the approach to vehicle repairs.

30
CAR Solutions

31
On-board diagnostics
OBD Log

OBD Log is an electronic device that, connected directly to the car’s diagnostic socket, records engine management
errors and parameters in accordance with the EOBD standard for petrol vehicles starting from the EURO 3 emissions
standard, and EURO 4 for diesel engines. All this while the customer drives their car normally, consequently reducing
workshop time. OBD Log can, for example, provide complete analysis of engine parameters for emissions testing, or
alternatively check the right fuel/air mix for LPG engines.
At end of the period in which the vehicle is monitored, the device is removed from the car and connected to the
workshop’s PC. OBD Log SW Suite downloads the recorded parameters and sorts them according to individual
journey, so as to further assist the automotive technician in identifying the situation in which the fault occurs.

OBD Log won the “International Grand Prix Award for Automotive Innovation” in the “Workshop Tools” category at
the Paris Equip Auto show in 2009.

COMPATIBILITY

WINDOWS
PC

32
 CAR Solutions

OBD Log SW SUITE

OBD Log SW Suite is the program used to download and
display on a PC all the data recorded by the OBD Log tool
over the period in which this is connected to the vehicle, so
as to monitor engine management problems. It can also
be used to configure the tool according to parameters
such as Vehicle Speed, Engine Revs, Engine Temperature,
Throttle Position and several others. In addition, it
manages a database with all the tests carried out on the
vehicle, sorted by date.

Figure 2
Figure 1 Errors: the software displays the list
Tool configuration: OBD Log can be configu- of errors identified during the various
red based on specific user requirements. journeys.

Figure 3
Error graph: the software
compares errors measured
against predefined engine Figure 4
parameters. Graph report: a graph can be printed to give to the
customer or keep as a record.

33
On-board diagnostics
OBD MATRIX

OBD MATRIX is an innovative tool that connects to the car’s OBD socket, used for diagnostics functions and setting
the vehicle’s accessible electronic systems (except for those relating to safety) while the vehicle is moving, meaning
the vehicle spends less time in the workshop. Sporadic or intermittent faults in the various ECUs that are hard to
identify when the car is stationary, are now easily resolved using this sophisticated tool.
OBD MATRIX can carry out diagnostics on all makes, models and electronic systems managed by the IDC4 MATRIX
software. After monitoring the vehicle for a certain period, the automotive technician simply connects the tool to a PC
and downloads the data. All the parameters recorded by OBD MATRIX can be displayed, regardless of whether these
highlight any faults or unusual situations.

In 2010 OBD MATRIX won the “Automechanika Innovation Award” in the “Repair&Diagnostics” category at the
Automechanika Exhibition in Frankfurt, while in 2011 it took home the “Galería de Innovacíon” prize in the “Electronic
Diagnostics” category from the Motortec international exhibition in Madrid.

COMPATIBILITY

WINDOWS
AXONE 4
PC

34
 CAR Solutions

IDC4 MATRIX
IDC4 MATRIX is a software that allows automotive technicians to easily and instantly control the OBD MATRIX tool for
working on a large number of makes and electronic systems, reading parameters in specific engine operating conditions.
It is also very useful when needing to monitor correct operation of an injector or the automatic transmission, turbo rpm
sensor, oil change or air-conditioner pressure.

Figure 1
Tool configuration: the cradle supplied is used
to configure the tool and transfer data to the
PC.

Figure 2
Tool installation: after having configured
OBD MATRIX, it can be plugged into the
vehicle’s socket to start monitoring.

Figure 3
Journey display: when the vehicle returns to the wor-
Figure 4
kshop, connect OBD MATRIX to the PC again and then
Journey report: graphs analysing the various journeys
download the data relating to the individual journeys.
show the parameters recorded by the tool for
comparison.

35
Emissions diagnostics

The TEXA solution for exhaust gas

analysis includes a series of tools for
performing all the tests and analyses
currently required by emission control
legislation: GASBOX Autopower, OPABOX
Autopower, GAS Mobile, MULTI PEGASO,
RC2 and RC3.

36
 CAR Solutions

Analysis
GAS Mobile MULTI PEGASO RC2 and RC3
chambers

OPABOX Autopo- This is a lightweight The MULTI PEGASO is a Tools used to measure
wer and GASBOX and compact portable complete unit designed engine RPM and tem-
Autopower are the device featuring a high- to work with all exhaust perature that commu-
TEXA analysis cham- visibility graphic LCD gas analysis tools. It is nicate with the TEXA
bers used for diesel display used to test all equipped with a 1.86 display units and with
engines and petrol en- types of engines, run- GHz, Intel Atom dual- MULTI PEGASO wire-
gines respectively, fea- ning on petrol, diesel core processor, 2 GB of less using Bluetooth
turing a practical trolley or alternative fuels. It RAM, 340 GB hard disk, wireless technology.
that makes them easy exploits Bluetooth wi- 19” display, DVD burner RC2 carries out the me-
to move around the reless technology to and air mouse remote asurements using a mi-
workshop. communicate with control. The operating crophone and based on
To make these solu- OPABOX Autopower, system is Windows 7. residual battery signal,
tions even more flexible, GASBOX and the RC2 Hardware also inclu- or an induction clamp
as well as being plug- and RC3 engine speed des a Bluetooth modu- via a piezoelectric sen-
ged into any standard and temperature gau- le and a colour printer. sor. In addition to these
mains power socket, ges. The bottom section of modes, RC3 can also
OPABOX and GASBOX The lithium-ion bat- the unit houses two read the data directly
can also be used with teries offer a full day’s compartments con- from the OBD socket.
Power Pack, a practical autonomy, meaning the taining connectors for
module that is remo- device does not need recharging the GASBOX
vable and rechargeable to be plugged into the Autopower and OPABOX
separately. This clever mains or the vehicle’s Autopower modules.
solution means that power supply, and can A combination of soli-
one or more batteries be conveniently used dity and easy handling
are charged and ready inside the vehicle. makes the MULTI
to use at all times. PEGASO ideal for
workshop use.

37
A/C diagnostics stations
for R1234yf and R134a
The KONFORT 700 line features seven models, with different specifications and operating
modes, used for effective maintenance on both vehicles with new R1234yf refrigerant,
and those using the “old” R134a. To guarantee unrivalled quality and lasting reliability,
TEXA products are manufactured on highly automated assembly lines. Components and
complex sub-assemblies undergo advanced computerised checks and tests at the pre-
assembly stage. KONFORT features a total of eight registered international patents. The
components used all have exceptional characteristics and guarantee refrigerant recovery
efficiency in excess of 95%. The essential and neat design combines with easy handling,
sturdiness and safety to make all maintenance operations simple and easy.

38
 CAR Solutions

Air-conditioning diagnostics
KONFORT 780R

MAIN FEATURES
• Dual refrigerant manage-
ment R134a & R1234yf
• High visibility colour TFT
display
• Graphic interface
• DATABASE/SERVICE mana-
gement via SD card
• Rotating gauge display
(excluding Germany)
• 2x 12Kg tank
• Load precision +/- 15gr
• High efficiency refrigerant
recovery (over 95%)
• Dual stage vacuum pump
• Hermetically sealed oil bottles
• High precision automatic oil
injection
• Automatic bottle recognition
• Automatic refrigerant preci-
sion check
• Scale lock system
• Automatic service manage-
ment
• Functionality:
- DATABASE
- PERSONALISED SERVICE
- MY DATABASE
• Multilingual software coverage
• Service hose length com-
pensation
• Automatic service messages
• Simplified unit service
• Automatic non condensable
management
• Thermal printer

This model is top of the 700 series range, and offers everything that is required OPTIONAL
Flushing kit, VDC Kit, Climate
for the market. The 780R version is the same size as the other units, but
control efficiency, refrigerant
offers two tanks and two separate circuits for recovery, recycling and refilling, identifier, air conditioning sy-
in order to operate with both refrigerants simultaneously (the original R134a stem autodiagnostics.
and the new R1234yf). The entire service procedure is completely automated
with a hermetically sealed oil/UV bottle system.
A scale locking system and automatic refrigerant leakage check. It also has
a special procedure for cleaning the internal circuits during the refrigerant
change procedure. The operator is able to select the correct refrigerant
dependant on the vehicle’s requirement. The machine carries out the flushing
procedure automatically in order to clean out the system when changing
from one refrigerant to the other. This procedure takes approx. one minute.
The 780R will provide a solution for workshops’ who are required to deal
with new vehicles fitted with the new R1234yf refrigerant, but also maintain
vehicles which will continue using the traditional R134a refrigerant.

39
 KONFORT 705R KONFORT 710R KONFORT 720R

The KONFORT 705R is the latest In this period of transition from old The KONFORT 720R station is
TEXA “entry level” recharge station to new gas, TEXA hasn’t forgotten ready for use on all car, commer-
for vehicle air conditioning systems, about recharging stations that work cial vehicle, HGV and tractor A/C
designed with the precise objecti- with R134a only, a gas still used on systems, at an affordable purcha-
ve of offering mechanics a simple many of the vehicles currently in se price yet without compromising
but complete unit for all recovery circulation. on the technology of the KONFORT
and recharge jobs involving only Despite being a basic model, the range. It features automatic refrige-
R134a refrigerant, at an extremely TEXA KONFORT 710R provides rant recovery and recycling and oil
competitive price. several important functions from drain functions. The amount of oil
The KONFORT 705R possesses the the KONFORT 700 line as standard, and UV tracer are controlled by an
same basic characteristics as the such as automatic leak detection, automatic system, leaving the ope-
other models in the KONFORT range refrigerant weighing on electronic rator to carry out just a few simple
and therefore represents an ideal scales, automatic timed injection of manual operations. It can be pur-
solution for garages committed oil and UV tracer and high-efficiency chased ready for traditional R134a
to offering customers impeccable refrigerant recovery (over 95%). refrigerant, or alternatively for the
service while keeping their business new R1234yf, where necessary
costs under control. changing over from one to the other
using an optional retrofit kit.

KONFORT series is approved by:

BMW KIA MINI RENAULT
CHEVROLET LAND ROVER MITSUBISHI SUBARU
HYUNDAI MAZDA NISSAN SUZUKI
JAGUAR MERCEDES-BENZ OPEL TOYOTA

Please check at your TEXA dealer which model and which refrigerant type is recommended by the manufacturers
listed above.

40 APPROVED BY
 CAR Solutions

KONFORT 760R KONFORT 770S REFRIGERANT

AND 760R BUS IDENTIFIER KIT

Maintenance operations are KONFORT 770S - for R1234yf gas TEXA has developed an innovative
completely automated, without only - implements exclusive techno- refrigerant identifier solution, the
using any manual valves. Extra logical solutions based on the only one of its type to be made in
features compared to version 720R specifications defined by German Europe, fitted as standard on the
are hermetically-sealed oil tanks, car makers. KONFORT 770S and as an option
fully automatic maintenance mana- The refrigerant tank is fitted on on all other versions (except for the
gement, scales locking/unlocking sturdy electronic scales, with a 705R, 710R and 720R). Covered
device and automatic checking of safety system to prevent changes to by three registered international
correct refrigerant weight. calibration during transport. patents, it ensures the purity of either
The 760R BUS version is developed It comes with an automatic leak the R134a or R1234yf, and prevents
specifically for larger systems, and detection system, combined with technicians from carrying out any
comes with a 30 kg tank, a 21 cc EN837 Class 1 certified pressure risky operations involving hazar-
compressor and two-stage vacuum gauges, ensuring maximum dous combinations of refrigerant.
pump. The unit can be purchased precision.
ready for traditional R134a refri- Refrigerant weighing performance
gerant, or alternatively for the new guarantees a maximum error of +/-
R1234yf, where necessary changing 15 g.
over from one to the other using an
optional retrofit kit.

Please visit us on www.texa.com/konfort

For more news and details on the innovative KONFORT 700, go to www.texa.com/konfort.
There you will find all the information, pictures and demo videos on our future-ready recharge station.

41
TECHNICAL TRAINING
TEXA believes customer training to be particularly important, since adequate technical competence
and the correct use of diagnostic tools are critical to the success of repair work. The teaching
methods used in TEXA courses are based on an ideal mix of theory and practice on vehicles. Practice
plays a fundamental part, as it combines testing and simulations with use of the mechanic’s own
TEXA diagnostic tools, thus stimulating more active and dynamic participation and more effective
learning.

GAS SPECIALIST TRAINING PATH

LPG AND METHANE VEHICLES Duration: 16 h
G12a FUNCTIONING AND DIAGNOSTICS OF METHANE SYSTEMS Duration: 8 h
Functioning and diagnostics of the latest generation of methane systems developed by leading manufacturers (Landi,
BRC, etc.) and leading OEMs (Fiat, Volkswagen, etc.). In-depth information and practice in diagnosing various systems;
adjustment, configuration and calibration using TEXA diagnostic tools.

G12b FUNCTIONING AND DIAGNOSTICS OF LPG SYSTEMS Duration: 8 h

Functioning, diagnostics and evolution of LPG systems. In-depth information and practice in fault-finding using
manufacturers’ calibrations. Injector servicing and calibration procedures; calibration and switching of gas-petrol
systems using the LPG application available on TEXA’s advanced diagnostic tools.

DIAGNOSTIC TECHNICIAN TRAINING PATH Duration: 16 h

ELECTRONICALLY CONTROLLED TRANSMISSIONS
S5a FUNCTIONING AND DIAGNOSTICS OF ROBOTISED GEARBOXES Duration: 8 h
The principle of functioning of electronically controlled robotised gearboxes; distinguishing between standard and dual
clutch gearbox configurations; in-depth information on how to use autodiagnostic resources to detect errors and set
parameters, calibrate and align the speeds of Selespeed, Volkswagen DSG gearboxes and the Mercedes gearbox in the
SMART. Maintenance and methods for adding oil and changing filters.
S5b FUNCTIONING AND DIAGNOSTICS OF AUTOMATIC GEARBOXES Duration: 8 h
Functioning of continuously variable transmissions (CVT) and automatic transmissions (AT) with planetary gearsets.
Functioning of the torque converter, gearbox oil pump, planetary gears, and mechatronic gearbox brakes and clutches.
Diagnostic and configuration procedures for the ECUs of the Mercedes 7G Tronic AT and the ZF 6HP transmissions
adopted by BMW, AUDI, LAND ROVER and JAGUAR. Oil changes, oil levels and filter changes.

ac CERTIFICATION FOR PERSONNEL RECOVERING

FLUORINATED GASES FROM VEHICLE AIR CONDITIONING Duration: 8 h
E

CE R T I C AZI
ON

SYSTEMS – EC REGULATION 307/2008

IF

DPR AIR CONDITIONING QUALIFICATION COURSE Duration: 8 h

43/2012
Following the issue of Presidential Decree 43 of the 27th January 2012, implementing EC Regulation 842/06, personnel
responsible for the recovery of fluorinated greenhouse effect gases from vehicle air conditioning systems must hold the
necessary certification even in order to perform simple tasks like recharging and testing. TEXA’s trainers are authorised
to issue the necessary certificates at the end of this mandatory training course. This mandatory training course satisfies
the minimum requirements of EC regulation 307/08. It teaches all the necessary skills, provides essential information
on applicable legislation, and enables you to work in complete safety. In additional to satisfying legal requirements, the
course also looks in greater detail at diagnostic procedures for electronically controlled air conditioning systems and the
special technology found in the air conditioning systems of hybrid vehicles.

42
 CAR Solutions

HYBRID SERVICE TRAINING PATH Duration: 28 h

HYBRID AND ELECTRIC VEHICLES WITH PES/PAV CERTIFICATION
G11 FUNCTIONING AND DIAGNOSTICS OF START&STOP AND HYBRID SYSTEMS Duration: 8 h
Architecture and functioning of “Micro Hybrid” (Start & Stop) systems on Fiat, Citroën and BMW, and “Mild Hybrid” systems
on Honda and Volkswagen. Methods for starting, recharging and energy management. Case studies with diagnostics
applied to vehicles with the Citroën C4, BMW Series 1, and FIAT Start&Stop system. Reading parameters and errors,
configuring the battery and calibrating the various systems using a diagnostic tool.
S7 FUNCTIONING AND DIAGNOSTICS OF THE TOYOTA HYBRID SYSTEM Duration: 8 h
Functioning and description of Toyota hybrid system components: MG1 and MG2 engines, inverter group, HV battery pack,
location of control units and hybrid circuit devices. Functioning of the 1 NZ FXE engine and BUS networks, architecture of
the low and high voltage electrical networks and repair procedures performed with the aid of autodiagnostic resources.
Methods for recovering the vehicle, starting with an auxiliary battery and rendering safe.
Pes/Pav PES/PAV QUALIFICATION: SAFETY IN HYBRID AND ELECTRIC VEHICLES Duration: 12 h
Course leading to the qualification to perform work according to CEI EN 11-27 standard involving electrical risks on
electrical or hybrid vehicles, necessary to comply with the requirements of Legislative Decree 81/2008 governing the
safety of workers. In-depth information on ensuring the safety of the various types of vehicles currently in circulation,
their maintenance and recovery and the replacement of batteries.

DIAGNOSTIC SPECIALIST TRAINING PATH Duration: 24 h

ADVANCED ROADSIDE DIAGNOSTICS & TROUBLESHOOTING
D1.2 DIAGNOSTICS AND CONFIGURATION OF ELECTRONIC COMPONENTS Duration: 8 h
Diagnostic and troubleshooting procedures based on the reading of errors recorded in control units and interpretation
of the engineering parameters of TEXA diagnostic tools. EOBD diagnostics and procedures for resetting electronic
components following replacement or maintenance using common autodiagnostic operations on FIAT, BMW, FORD,
VOLVO, VAG Group, Renault, etc..

D5 ADVANCED ROADSIDE DIAGNOSTICS & TROUBLESHOOTING Duration: 8 h

Troubleshooting based on real case studies and autodiagnostic parameter records obtained using on board tools like
OBD MATRIX and OBD Log, and the Rec & Play function of IDC4 PLUS and PREMIUM. On board diagnostics permit the
early identification of engine problems by checking and monitoring all the car’s centralised functions.

D3.4 RESET AND CONFIGURATION TECHNIQUES Duration: 8 h

This course teaches the procedures for diagnosing and configuring different latest-generation electronic systems.
Engine management, automatic gearboxes, DPF regeneration, AD Blue system, CAS system, electronic brakes, CAN
networks, air-bags, battery encoding, brake pad replacement, wheel alignment system and transport mode switching.
General information and explanation of the system’ in-depth information on autodiagnostic, resetting, setting, activation
functions etc. and when and how to use them.

Check course availability in your country.

43
TEXA
TEXA was established in 1992 in Italy at Monastier di Treviso, and today is a European leader in the design and production
of multibrand diagnostics tools, exhaust gas analysers and air-conditioning maintenance stations. TEXA has operations vir-
tually all over the world, through an extensive distribution network, while in Spain, France, Great Britain, Germany, the United
States, Poland, Russia and Japan, it markets its products directly through its own branches. TEXA now employs some 450
people around the world, including more than 100 engineers and specialists working in Research and Development.
TEXA has also received extensive international recognition over the years: the company won the prestigious Frost & Sullivan
award in 2006 and 2007, received the GIPA (Groupement Inter Professionnel de l’Automobile) prize in 2009 for the TEXAEDU
program and again in 2013 for Communications. In 2009 TEXA won also a gold medal at the Grands Prix Internationaux de
l’Innovation Automobile in Paris. In 2010 it won the Innovation award at Automechanika Frankfurt, and in 2011 the “Galeria de
Innovacion” prize at Motortec in Madrid. In 2011, the President of the Italian Republic Giorgio Napolitano presented founder
and CEO Bruno Vianello with the national award for Italy’s most innovative company. All TEXA tools are designed, engineered
and built in Italy, using modern automated production lines, a guarantee of maximum precision. TEXA focuses careful atten-
tion to product quality, and has obtained certification in accordance with the strict ISO TS 16949 requirements for suppliers
of original equipment to the automotive industry.

To check out the extensive coverage of TEXA products, go to: ALL TEXA PRODUCTS
www.texa.com/coverage ARE GUARANTEED FOR
24 MONTHS
To check on IDC4 compatibility and minimum system requirements, go to:
www.texa.com/system
WARNING
The trademarks and logos of vehicle manufacturers in this document have been used exclusively for information purposes and are used to
clarify the compatibility of TEXA products with the models of vehicles identified by the trademarks and logos. Because TEXA products and
software are subject to continuous developments and updates, upon reading this document they may not be able to carry out the DIAGNO-
STICS of all the models and electronic systems of each vehicle manufacturer mentioned within this document. References to the makes, www.facebook.com/texacom
models and electronic systems within this document must therefore be considered purely indicative and TEXA recommends to always
check the list of the “Systems that can be diagnosed” of the product and/or software at TEXA authorized retailers before any purchase. The
images and the vehicle outlines within this document have been included for the sole purpose of making it easier to identify the vehicle
category (car, truck, motorbike, etc.) for which the TEXA product and/or software is intended. The data, descriptions and illustrations may www.youtube.com/texacom
change compared to those described in this document. TEXA S.p.A. reserves the right to make changes to its products without prior notice. MADE IN ITALY

The BLUETOOTH brand is the property of

Bluetooth SIG, Inc., U.S.A., and is used by
TEXA S.p.A. TEXA S.p.A. under license.
Via 1 Maggio, 9
31050 Monastier di Treviso Android is a trademark of Google Inc
Treviso - ITALY
Tel. +39 0422 791311 Copyright TEXA S.p.A.
Fax +39 0422 791300 cod. 8801785
www.texa.com - info.it@texa.com August 2014 - Inglese - V.2.0