Charging Data
81kW battery
Level 1 NACS @ 1.3kWh 3 mph
Level 2 NACS @ 7.8kWh 30 mph
Level 3 NACS @ 250kWh 80% in 28 min.
On the road, goal is 80% charge – that last 20%
takes 2-3 times longer than the first 80%. For more information on the Model
Save the 100% for overnight charging.
Y please follow QR code below. Our
Charging
DOC site has provided additional
DES Fleet Teslas can be charged at Tesla
vehicle information and stats,
Superchargers but also come with a J-plug
adaptor in the glove box for use other charging
including quick start guides to help Model Y
stations. get you going.
To Charge
Open the charge port door (either from the
touchscreen or by tapping on the port door)
and insert the charging plug.
The small Tesla logo next to the charge port
will pulse green. When fully charged, the logo
will no longer be visible.
To Remove The Plug Emergency Contact Phone Numbers
Depress the latch on the charging station
plug (1) and wait until the Tesla logo next to DOC E-Plate Vehicles
the port turns white. Contact Facility Auto shop / Motorpool
Remove BOTH and charging station plug (1) Here is more information on BEV Fleet Manager - 360.239.7832
and the adaptor (2) AT THE SAME TIME.
and Charging of electric vehicles. docfleetmanagement@doc1.wa.gov
Failure to do this will result in the adaptor
being stuck in the charge port.
DES M-Plate Vehicles
DES Vendor Maintenance - 800.542.6840
mpmaint@des.wa.gov
(WEX/Charge cards)
DES Dispatch – 800.542.6840
mpdispatch@des.wa.gov
CEI Claims Roadside
800-BR005 (R. 04/2024) 877.443.5777 800.329.3471
Acceleration Modes To Set the Regenerative Braking Level
Whenever Model Y is moving and your foot is
Voice Commands
Touch Controls > Pedals & Steering > Voice commands are not available in all
off the accelerator, regenerative braking slows
Acceleration to adjust the amount of languages. To choose the language you
down the vehicle and feeds any surplus power
acceleration you experience when driving want to use for voice commands, touch
back to the Battery.
Model Y: Controls > Display > Voice Recognition
You can use the touchscreen to change the
Chill: limits acceleration for a smooth Language.
level of regenerative braking:
and gentle ride. Use voice commands to easily control
1. Touch Controls > Pedals & Steering >
NOTE: When Chill is selected, Chill settings and preferences without using the
Regenerative Braking.
displays on the touchscreen above touchscreen. Voice commands are designed
2. Choose from two levels:
the driving speed. Low: Limits regenerative braking. When to understand natural requests. Use them to:
Standard: provides the normal level of you release the accelerator, Model Y Adjust climate preferences.
acceleration on non-Performance takes longer to slow down and coasts Tweak the windshield wiper speed and
vehicles. farther than if set to “Standard”. frequency.
Sport: provides the normal level of Standard: Provides the maximum Control various aspects of your vehicle.
acceleration on Performance vehicles. amount of regenerative braking. When Navigate to a location.
You can improve the efficiency of the cabin you release the accelerator, Model Y Call a contact.
heating by reducing your selected slows down, reducing the need to use Interact with apps and settings.
acceleration mode. This allows the heat the brakes. To initiate a voice command, press and
pump system to take more heat from the release the right scroll wheel button on the
Battery to efficiently heat the cabin, instead steering wheel. When a chime sounds, make
of maintaining the Battery's ability to provide your request, then Model Y provides
1. The left side of the power meter represents onscreen responses.
peak acceleration performance. This helps to
power generated from regenerative braking,
maximize driving efficiency in colder
or power that is used to slow down the
weather. Note that when subsequently
vehicle. Power being fed back to the Battery
increasing the acceleration mode, the
displays in green whereas power used by the
Battery requires time to warm up before the
regular braking system displays in gray.
increased level of acceleration is available.
2. The right side of the power meter shows
power being output by the Battery, such as
that used to accelerate the vehicle or to cool
the cabin. When you press the accelerator
pedal, the power meter fills to the right with
black (or white if the display is dark).
