107

29 Supplying,Installation, Testing &

Commissioning of 4 Feet 20-22 Watt
Aluminium Housing LED surface mounted
Batten light, powder coated diecast aluminium
body with polycarbonate diffuser with built in
driver , Operating voltage AC 100 - 240Volt ,
freq 50/60hz, internal surge protection of
2.5KV with Short & Open circuit protection,
THD<15% , P.F.≥0.90, IP20, CRI>80, life
time of minimum 50000 Burning Hours with,
70% of initial Lumen maintained till life ends,
CCT3000°K to 6500°K (AsperANSIBin) ,
Maximum power consumption should not more
than the specified rating and Fixture shall be of
BIS standard and trademark certificate
(T.C.).Manufactures Word Mark/ Name
Engraved / Embossing / Screen printing on
housing. OEM must have its own in house
NABL lab setup for all testing facilities for LED
fixtures." complete in all respect i/c connections
with 1.5sqmm FRLS, PVC insulated copper
conductor single core cable and earthing etc.
as required" ,(LM79&LM80) certificate /
Report from OEM shall be submitted.
Minimum 2 year OEM warranty,. Shape size
and CCT shall be as approved by NIT
authority.system lumen efficacy MIN 110
lm/Watt output. All as per pre-approved by
Engineer-in-charge 50 Nos. 833.00 41650.00
30 Supplying, installation, Testing &
Commissioning of 4 Feet 36-40 Watt
Aluminium Housing LED surface mounted
Batten light, powder coated diecast aluminium
body with polycarbonate diffuser with built in
driver, Operating voltage AC 100 - 240Volt ,
freq 50/60hz, , internal surge protection of
2.5KV with Short & Open circuit protection,
THD<15% , P.F.≥0.90, IP20, CRI>80, life
time of minimum 50000 Burning Hours with,
70% of initial Lumen maintained till life ends,
CCT3000°K to 6500°K (AsperANSIBin) ,
Maximum power consumption should not more
than the specified rating and Fixture shall be of
BIS standard and trademark certificate
(T.C.).Manufactures Word Mark/ Name
Engraved / Embossing / Screen printing on
housing. OEM must have its own in house
NABL lab setup for all testing facilities for LED
fixtures." complete in all respect i/c connections
with 1.5sqmm FRLS, PVC insulated copper
conductor single core cable and earthing etc.
as required" , (LM79&LM80) certificate /
Report from OEM shall be submitted.
Minimum 2 year OEM warranty,. Shape size
and CCT shall be as approved by NIT
authority.system lumen efficacy MIN 110
lm/Watt output. All as per pre-approved by
Engineer-in-charge 10 Nos. 877.00 8770.00

Correction = Nil, Insertion = Nil, Overwriting = Nil, Deletion = Nil, AE (P)

 108

31 Supplying,Installation, Testing &

Commissioning of 2 Feet 10-12 Watt
PVC/Polycarbonate Housing LED surface
mounted Batten light, PVC/Polycarbonate body
with polycarbonate diffuser with built in driver
, Operating voltage AC 100 - 240Volt , freq
50/60hz, , internal surge protection of 2.5KV
with Short & Open circuit protection,
THD<15% , P.F.≥0.9, IP20, CRI>80, life time
of minimum 50000 Burning Hours with, 70% of
initial Lumen maintained till life ends,
CCT3000°K to 6500°K (AsperANSIBin) ,
Maximum power consumption should not more
than the specified rating and Fixture shall be of
BIS standard and trademark certificate
(T.C.).Manufactures Word Mark/ Name
Engraved / Embossing / Screen printing on
housing. OEM must have its own in house
NABL lab setup for all testing facilities for LED
fixtures." complete in all respect i/c connections
with 1.5sqmm FRLS, PVC insulated copper
conductor single core cable and earthing etc.
as required" , (LM79&LM80) certificate /
Report from OEM shall be submitted.
Minimum 2 year OEM warranty,. Shape size
and CCT shall be as approved by NIT
authority.system lumen efficacy MIN 110
lm/Watt output. All as per pre-approved by the
Engineer-in-charge 30 Nos. 581.00 17430.00
32 Supplying, installation, Testing &
Commissioning of 10 W LED Bulk head fitting
,powder coated pressure die cast aluminium
body with Poly carbonate Diffucer with built in
driver , Input voltage:100-240Volt,
AC,freq50/60hz, Driverefficiency>85%,
THD<15 % , P.F.≥0.9, IP-65, CRI>80, under
voltage and over voltage protection, life time of
minimum 50000 Burning Hours with 70% of
initial Lumen maintained till life ends,
CCT3000°K to 6500°K (AsperANSIBin),
Maximum power consumption should not more
than the specified rating and Fixture shall be of
BIS standard OEM must have its own in house
NABL lab setup for all testing facilities for LED
fixtures." complete in all respect i/c connections
with 1.5 sqmm FRLS, PVC insulated copper
conductor single core cable and earthing etc.
as required", (LM79&LM80)certificate / Report
from OEM shall be submitted. Minimum 2 year
OEM warranty, . Shape size and CCT shall be
as approved by NIT authority .System lumen
efficacyMIN 110 lm/Watt output All as per pre-
approved by Engineer-in-charge 25 Nos. 1323.00 33075.00

Correction = Nil, Insertion = Nil, Overwriting = Nil, Deletion = Nil, AE (P)

 109

33 Supplying, installation, Testing &

Commissioning of Decorative wall mounted
fancy fitting suitable for fixing up to one No. 9
W LED retrofit lamp with B22 /E-27 base,
spherical / conical translucent PC / PMMA/
Glass cover (dia ± 160 mm to 180 mm with
metallic base frame suitable for 220 volt i/c
wiring complete as required. ( The model to be
approved before fixing). 27 Nos. 1163.00 31401.00
34 Supply, Installation, Testing and
Commissioning of 1200 mm sweep, BEE 5
star rated, ceiling fan with Brush Less
Direct Current (BLDC) Motor, class of
insulation: B, 3 nos. blades, 30 cm long
down rod, 2 nos. canopies, shackle kit,
safety rope, copper winding, Power Factor
not less than 0.9, Service Value (CMM/W)
minimum 6.85, Air delivery minimum 215
CMM, 350 RPM (tolerance as per IS : 374-
2019), THD less than 10%, remote or
electronic regulator unit for speed control
and all remaining accessories including
safety pin, nut bolts, washers, temperature
rise=75 degree C (max.), insulation
resistance more than 2 mega ohm, suitable
for 230 V, 50 Hz, single phase AC Supply,
earthing etc. complete as required. 22 Nos. 2278.00 50116.00
35 Supplying, Installation, testing and
commissioning of 1400 mm sweep ISI (374)
Marked ceiling fan without regulator,
double ball bearing,capacitor along with
down rod of standard length (upto 30 cm)
suitable for Air delivery more than 240 m3
/min, consuming not more than 60 watt,
single phase 230 volts 50HZ c supply i/c
painting ,wiring the down rod of standard
length with 1.5 sqmm FRLS PVC insulated
copper conductor,single core cable etc as
required. The fan should have gurantee for
minimum 2 years. 8 Nos. 2459.00 19672.00
36 Supplying , installtion, testing and commissiong
of heavy duty 300mm sweep ,6 pole ,single
phase, 900rpm ,propeller type ventilating
metalic body exhaust fan on the existing
ventilator/opening complete with
connection,testing & commissioning etc as
required. 8 Nos. 4483.00 35864.00
37 Supplying and replacement / fixing the louvers/
shutters complete with frame for a exhaust fan
of all sizes. (G.F / 1st Floor / 2nd Floor / 3rd
Floor) 8 Nos. 246.00 1968.00
38 Supplying , installtion, testing and commissiong
of Plastic body exhaust fan/fresh air fan 250
mm sweep size on the existing
ventilator/opening complete with connection 10 Nos. 2035.00 20350.00

Correction = Nil, Insertion = Nil, Overwriting = Nil, Deletion = Nil, AE (P)