SAFETY DATA SHEET
Printing Date: 11.9.2013 Revision Date: 11.9.2013
SECTION I. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name FEVICOL SR 998
Product description Rubber based adhesive
Product use Spray able solvent based synthetic rubber contact adhesive.
Manufacturer/supplier Pidilite Industries Ltd., Ramkrishna Mandir Road,
Kondivita, Off: M. Vasanji Road, P.O. Box 17411,
Andheri (East), Mumbai – 400059
Email: pilmsds@pidilite.co.in
Telephone: +91-22-2835 7000 Fax: +91-22-2821 6007
SECTION II- IDENTIFICATION OF HAZARDS
Classification according to GHS:
Label requirement
Signal word: Danger
Hazard statement:
H225: Highly flammable liquid and vapors
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: may cause drowsiness or dizziness
H361f: Suspected of damaging fertility.
H373: May cause damage to organs through prolonged or repeated exposure.
H411: Toxic to aquatic life with long lasting effects.
Precautionary statement
P210: keep away from heat / sparks/ open flames/ hot surfaces. – no smoking
P233: keep container tightly closed.
P242: use only non sparking tools.
P243: take precautionary measurements against static discharge.
P271: Use only outdoors or in a well-ventilated area.
P280: wear protective gloves/protective clothing /eye protection /face protection
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P331: Do NOT induce vomiting.
Classification according to EU Directive 67/548/EEC or Directive 1999/45/EC:
Hazard Symbol:
R11: Highly Flammable
R38: Irritating to eyes and skin
R48/20: Harmful: danger of serious damage to health by prolonged exposure through inhalation
R63: Possible risk of harm to the unborn child.
R65: Harmful: may cause lung damage if swallowed.
R67: Vapours may cause drowsiness and dizziness
R51/53: Dangerous for the environment; Very toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment
(Contd. on page 2)
MSDS Code: 013SD90101 Page 1 of 5 Rev. No: 0.4
SAFETY DATA SHEET
Printing Date: 11.9.2013 Revision Date: 11.9.2013
(Contd. of page 1)
Safety Phrases
S2: Keep out of the reach of children
S7: Keep container tightly closed
S9: Keep container in a well-ventilated place
S16: Keep away from sources of ignition - No smoking
S25: Avoid contact with eyes
S29: Do not empty into drains
S33: Take precautionary measures against static discharges
SECTION III – COMPOSITION/ INFORMATION ON INGREDIENTS
Chemical Identity: Formulation of Chloroprene rubber with Phenolic resins & solvent.
Hazardous ingredient(s):
Conc. Classification: Dir. 67/548/EEC
Chemical Name Cas no. Classification: GHS/CLP
% or 1999/45/EC
Haz. Symbol:
Toluene 108-88-3 45 ± 5 Haz. Pictogram:
R Phrases: R11, R38,
Haz. Statement code: H225, H304,
R48/20, R63, R65, R67
H315,H336, H361d, H373
Hydrocarbon 64742-49-0 35 ± 5 Haz. Symbol: Haz. Pictogram:
solvent
R Phrases: R11, R38, R51/53, Haz. Statement code: H225, H304,
R65, R67 H315, H411
SECTION IV- FIRST AID MEASURES
Skin contact: Flush skin with soap & water while removing contaminated cloths. Seek medical help if
required. Wash contaminated cloths before reuse.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Consult Physician if
irritation persists.
Inhalation: Move the subject to fresh air. If not breathing, give artificial respiration. If respiration is
difficult, give Oxygen and seek help from Physician.
Ingestion: Immediately give two glasses of water to drink. Do not induce vomiting. Never give
anything by mouth to an unconscious person. Call a Physician.
Note to physician: There is no specific antidote. Treatment should be given symptomatically on the clinical
conditions.
SECTION V - FIRE-FIGHTING MEASURES
Fire hazard: Highly flammable liquid & vapors. Avoid all ignition sources.
Fire extinguishing Use water fog (or if unavailable fine water spray), dry chemical, carbon dioxide or alcohol
Media: stable foam. Heating can cause expansion or decomposition leading to violent rupture of
containers. If safe to do so, remove containers from path of fire. Spills and leaks may be
washed away with copious volumes of water, fog or spray.
Special fire fighting As in any fire, wear self-contained breathing apparatus pressure- demand, MSHA/NIOSH
procedure: (approved or equivalent) and full protective gear.
Unusual fire and Under conditions giving incomplete combustion, hazardous gases produced may consist
explosion hazards: of oxides of carbon. Combustion gases of organic materials must in principle is graded
as inhalation poisons. Vapours may form explosive mixtures with air Vapors are heavier
than air and can travel considerable distance to a source of ignition and flashback.
(Contd. on page 3)
MSDS Code: 013SD90101 Page 2 of 5 Rev. No: 0.4
SAFETY DATA SHEET
Printing Date: 11.9.2013 Revision Date: 11.9.2013
(Contd. of page 2)
SECTION VI - ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid contact with skin and eyes. Avoid breathing vapors or mists. Keep people
away from and upwind of spill/leak. Ensure adequate ventilation, especially in
confined areas. Keep away from heat and sources of ignition. See sections VII &
VIII for personal protective equipment & handling.
Environmental precautions: Prevent further leakage or spillage. Do not discharge product into the aquatic
environment.
Cleaning methods: Wipe off floor with inert material and cloth duster. Contaminated diking material
may be incinerated according to current local or central regulation. Keep in
suitable, closed containers for disposal. Dispose of in accordance with local
regulations. Take necessary action to avoid static electricity discharge (which
might cause ignition of organic vapors).
SECTION VII- HANDLING AND STORAGE
Precautions for Keep away from heat, sparks and flame. Avoid all personal contact. Wear protective
safe handling: clothing (See section VIII). Use in a well-ventilated area. Avoid contact with incompatible
materials. When handling, Do not eat, drink or smoke. Wash hands before breaks and
immediately after handling the product. Provide sufficient air exchange and/or exhaust in
work rooms. Do not use compressed air for filling, discharging or handling. Keep
containers securely sealed when not in use.
Storage: Store in tightly closed containers in cool, dry, and well ventilated areas, isolated from
heat, sources of ignition and incompatibles. Store away from oxidizing agents. Keep
containers closed at all times – check regularly for leaks. Store with all precautions
required for handling flammable liquids.
SECTION VIII- EXPOSURE CONTROL/ PERSONAL PROTECTIVE EQUIPMENT
Ventilation: Local exhaust ventilation and/or mechanical (general) exhaust are recommended where vapors
are likely to be generated. All such equipment must be intrinsically safe.
Personal protective equipment
Eye protection: Avoid eye contact by wearing chemical goggles with side shields or face shield whenever
exposed to vapor or mist or if there is a risk of splashing liquid in the eyes. Safety
showers with eye-wash should be provided in all areas where product is handled.
Hand/Skin protection: Avoid skin contact by the use of approved chemical resistant gloves Impervious (rubber,
neoprene, PVC, etc.) hand gloves, aprons. Wear appropriate protective gloves and
clothing to prevent skin exposure.
Respiration protection: In high vapor concentrations or in suspected oxygen deficient atmospheres, such as
empty vessels or confined spaces, use air supplied hood Use suitable respiratory
protective device in case of insufficient ventilation. Maintain good ventilation in the area.
Suggested MSHA/NIOSH approved respirator where vapors concentrations is more.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice.
Protective measures: Eye wash facility and emergency shower.
Smoking and other dusts: Smoking must be prohibited in all areas where product is being used.
(Contd. on page 4)
MSDS Code: 013SD90101 Page 3 of 5 Rev. No: 0.4
SAFETY DATA SHEET
Printing Date: 11.9.2013 Revision Date: 11.9.2013
(Contd. of page 3)
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
Form/ Color: Dark brown liquid Odour: Characteristic
0
Boiling point/Boiling range: >111 C Flammability: Flammable
0
Flash point: 4.4 C Explosive limits (% by vol): Not determined
Ignition temperature: Not determined Decomposition temperature: Not determined
0
Density / specific gravity (water=1): 0.84 - 0.88 g/ml Vapor Pressure @20 C: 28.4 (MM HG)
0
Solubility in / Miscibility with water: Immiscible Viscosity @ 30 C (Poise): 20 – 25
Solid content: 22.5 - 23.5 %
SECTION X - STABILITY AND REACTIVITY DATA
Chemical stability: Stable under normal conditions of use.
Thermal decomposition: May yield acrid smoke and irritating gases with oxides of carbon
Possibility of hazardous reaction: Can react violently if in contacts with oxidizing agents.
Hazardous Polymerization: Hazardous polymerization does not occur
Conditions to avoid: Heat and ignition sources
Incompatible Materials: Comparable oxidizers
Hazardous decomposition product: Not known
SECTION XI - TOXICOLOGICAL INFORMATION
Toxicity: No quantitative data on toxicity is available for this product
Potential health effects
On the eye: Causes serious eye irritation.
On the Skin: Prolonged contact may cause slight skin irritation with local redness. Prolonged or repeated
exposure may lead to drying & flaking of skin
Inhalation: May be harmful if inhaled. May cause respiratory tract irritation. Vapours may cause drowsiness
and dizziness.
Ingestion: May be harmful if swallowed.
Additional toxicological information:
When used and handled according to specifications, the product does not have any harmful effects to our
experience and the information provided to us.
SECTION XII - ECOLOGICAL INFORMATION
Toxicity
108-88-3
LC 50/ 96 Hr 10 – 100 Mg/L
Aquatic toxicity: Quantitative data on the ecological effect of this product are not available.
Persistence and degradability No relevant information is available.
Behaviour in environmental systems:
Bioaccumulative potential: No further relevant information available.
Mobility in soil: No further relevant information available.
(Contd. on page 5)
MSDS Code: 013SD90101 Page 4 of 5 Rev. No: 0.4
SAFETY DATA SHEET
Printing Date: 11.9.2013 Revision Date: 11.9.2013
(Contd. of page 4)
Results of PBT and vPvB assessment: No information is available
Other adverse effects No further relevant information available.
Note: Avoid release to the environment. Product may
SECTION XIII - DISPOSAL INFORMATION
Waste from Residues / Unused Products: Dispose of in accordance with local regulations
Contaminated Packaging Empty containers should be taken to local recyclers for disposal
SECTION XIV - TRANSPORTATION INFORMATION
UN Number (ADR, IMDG, IATA): 1133
UN proper shipping Name (ADR, IMDG, IATA): Adhesives, containing a flammable liquid
Transport hazard class (es) (ADR, IMDG, IATA): 3
Packing group (ADR, IMDG, IATA): II
EMS No: F-E, S-D
Special precautions for user: Avoid contact with eyes & skin. Keep away from ignition sources. Avoid release to
the environment.
SECTION XV - REGULATORY INFORMATION
Chemical Inventories: The chemical Substances used in the product are listed on following chemical
inventories: AICS (Australia), Canada (DSL), China (IECSC-SEPA), Japan (ENCS),
Korea (KECI), PICCS (Philippines), TSCA
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION XVI - MISCELLANEOUS INFORMATION
DISCLAIMER: The data presented here is based on information we believe to be reliable but unknown risks may
be present. We disclaim liability for damage or injury which results from the use of the above
data and nothing contained therein shall constitute a guarantee or a warranty (including warranty
of Merchantibility or fitness for a particular purpose) or representation (including freedom from
Patentability) by us with respect to the accuracy or completeness of the data, the product
described or their use for any specific purpose as known to us. The final determination of the
suitability of information, the manner of use of information or product and potential infringement
of patents is the sole responsibility of the user.
ABBREVIATIONS USED: NA - NOT APPLICABLE, NH - NON HAZARDOUS,
CI - CONTENT INSIGNIFICANT.
ISSUED BY SAFETY DEPARTMENT
MSDS Code: 013SD90101 Page 5 of 5 Rev. No: 0.4
