TM
Vector-Max hydraulic-set liner hanger
Liner Hanger Systems
VECTOR-MAX Hydraulic-Set Liner Hanger Assembly
TM
The Vector-Max is a premium 4.5-in. x 7.0-in.high-load liner hanger/packer for horizontal, vertical,
or deviated wells. Hanger design protects slips from damage, and running tool design prevents
unplanned release. The robust torque-clutch ring enables rotation during installation.
Key Features
Fully compatible with the Multistage Unlimited frac system
One-piece, high-strength mandrel
Expanding metal liner top packer seal with bonded elastomeric cover, ISO V3 rated to 10,000 psi
(68.95 mPa) at 325 F (163 C)
Unique design prevents premature release of running tool
Hanger cone design keeps slips fully recessed and protected from damage during deployment
Robust torque ring clutch allows for liner rotation, push, and pull during deployment
Standard 4.00-in (101.6 mm) XT-39 connections on running tool
Setting-ball seats are located in the running tool
Large bypass flow area
Drill pipe wiper
Setting ball
Tool joint connection
4.00-in XT-39
TBR debris barrier
20-ft (6.1 m) tieback extension is standard. Other lengths available on request.
Dimensions and Ratings
Hanger body maximum OD
7.00-in., 23.0026.00 lb/ft .................................................6.075 in.
177.8-mm, 34.2338.7 kg/m .......................................... 154.3 mm
7.00-in., 29.0032.00 lb/ft .................................................5.850 in.
177.8-mm, 43.247.6 kg/m ............................................ 148.6 mm
Hanger mandrel nominal ID ...............................3.930 in. (98.82 mm)
Torque @upper-end fingers .......................... 25,000 lb-ft (33.9 kN-m)
Mandrel API collapse ....................................... 10,000 psi (68.95 mPa)
Mandrel API burst strength ............................. 10,000 psi (68.95 mPa)
Mandrel tension strength...........................417,000 lbf (185,490 daN)
Liner-top-packer
setting-dog assembly
Tie-back receptacle
125 MYS
Upper packoff assembly
Seal stack: Vee packing configuration
GF (PTFE/HNBR-Kevlar/virgin PEEK)
90 Duro Viton O-ring
Torque ring clutch assembly detail
Torque @upper-end fingers: 25,000 lb-ft
Right-hand-release float nut
Attaches running tool to hanger during
deployment. Mechanically releases the
running tool after the hanger assembly
is set.
Packer setting cone
Liner top packer seal
Aflas or HNBR
Hanger cone
125 MYS
Hanger slip-actuating piston detail
Hanger slips
4140-45, 110 Ksi MYS
Cylinder API burst = 16,400 psi
Cylinder API collapse = 15,860 psi
Lower packoff assembly
LPA seal stack: Vee packing stack,
GF (PTFE/HNBR-Kevlar/virgin PEEK)
90 Duro Viton O-ring
Hanger cylinder
125 MYS
LWP releasing sub
Hanger mandrel body
API Buttress pin down,
125 MYS
LWP releasing sub detail
Liner wiper plug
VECTOR-Max Weight-Set Liner-Top Packer
TM
Setting ball
This is a 4.5-in. x 7.0-in. liner-top packer with metal-to-metal seal. Hold-down slips prevent upward
movement after setting. The running tool design prevents unplanned release, and the robust
torque-clutch ring enables rotation during installation.
Key Features
Fully compatible with the Multistage Unlimited frac system
One-piece, high-strength mandrel
Expanding metal liner top packer seal with bonded elastomeric cover, ISO V3 rated to 10,000 psi
(68.95 mPa) at 325 F (163 C)
Unique design prevents premature release of running tool
Robust torque-ring clutch allows for liner rotation, push, and pull during deployment
Hold-down slips limit upward movement after system is set
Large bypass flow area
10-ft (3.05 m) tieback extension is standard. Other lengths available on request.
Dimensions and Ratings
Hanger body maximum OD
7.00-in., 23.0026.00 lb/ft .................................................6.075 in.
177.8-mm, 34.2338.7 kg/m .......................................... 154.3 mm
7.00-in., 29.0032.00 lb/ft .................................................5.850 in.
177.8-mm, 43.247.6 kg/m ............................................ 148.6 mm
Hanger mandrel nominal ID ................................3.930 in. (98.82 mm)
Torque @upper-end fingers .......................... 25,000 lb-ft (33.9 kN-m)
Mandrel API collapse ....................................... 10,000 psi (68.95 mPa)
Mandrel API burst strength ............................. 10,000 psi (68.95 mPa)
Mandrel tension strength...........................417,000 lbf (185,490 daN)
Liner-top-packer
setting-dog assembly
Tie-back receptacle
125 MYS
YC = 11,885 lb
Burst = 12,510 psi
API burst = 10,947 psi
Upper circulating packoff
Torque clutch ring
Right-hand-release float nut
Packer setting cone
Liner top packer seal
Aflas or HNBR
Hold-down slips
125 MYS
Hanger mandrel body
API Buttress pin down,
125 MYS
Attaches running tool to the liner top
packer during deployment. Mechanically releases the running tool after
the assembly is set.
VECTOR-1 Hydraulic-Set Liner Hanger
TM
Setting ball
The Vector-1 liner hanger is an economical 4.5-in. x 7.0-in. hydraulic-set hanger
designed for uncemented applications in horizontal, deviated, or vertical wells.
Key Features
Drill pipe
Fully compatible with Multistage Unlimited frac system
One-piece mandrel
Liner top packer is ISO V3-rated to 10,000-psi (68.95 mPa) at 275 F (135 C)
Anti-preset mechanism prevents premature setting
Large bypass flow area
Unique packer seal configuration
Bi-directional hold-down slips
10-ft (3.05 m) tieback extension is standard. Other lengths available on request.
Dimensions and Ratings
Hanger body maximum OD
7.00-in., 26.0029.00 lb/ft ................................................ 5.958 in.
177.8-mm, 11.79-13.15 kg/m .......................................151.33 mm
Hanger mandrel nominal ID ...............................3.930 in. (98.82 mm)
Torque @upper-end fingers ................................3,000 lb-ft (4.1 N-m)
Mandrel API collapse .......................................10,000 psi (68.95 mPa)
Mandrel API burst strength .............................10,000 psi (68.95 mPa)
Mandrel tension strength.......................... 338,600 lbf (105,600 daN)
Tie-back receptacle
125 MYS
Running tool
Torque-clutch ring assembly
Upper hold-down slips
4140-45, 110 Ksi MYS
Packoff assembly
Float nut
Lower hold-down slips
4140-45, 110 Ksi MYS
Anti-preset mechanism
Leave nothing behind
TM
WORLD HEADQUARTERS
NCS Multistage, LLC.
19450 State Highway 249, Suite 200
Houston, TX 77070
Ph: +1 281.453.2222
Fx: +1 281.652.5846
CANADA
NCS Multistage, Inc.
800, 8407th Avenue SW
Calgary, AB T2P 3G2
Ph: +1 403.720.3236
On the web:
ncsmultistage.com
Email inquiries: info@ncsmultistage.com
2015 NCS Multistage, LLC. All rights reserved.
Multistage Unlimited, Vector-Max, Vector-1 and Leave Nothing Behind are trademarks of NCS Multistage, LLC.
