Vectraset ™
All-premium hydraulic-set liner hanger
15,000-psi packer seal rating
Two-step design prevents premature running
tool release
System includes a 20-ft polished-bore tieback
WORLD HEADQUARTERS
receptacle
19350 State Highway 249, Suite 600
Houston, TX 77070
Ph: +1 281.453.2222
Fx: +1 281.652.5846
CANADA
700, 333–7th Avenue SW
Calgary, AB T2P 2Z1
Ph: +1 403.720.3236
info@ncsmultistage.com
ncsmultistage.com/wellconstruction
©2020 NCS Multistage, LLC. All rights reserved.
Multistage Unlimited, and Vectraset are trademarks of NCS Multistage, LLC. 04/2020
Drill pipe wiper
No hidden weaknesses Tie-back
receptacle
The Vectraset hydraulic-set liner hanger is a premium, solid-mandrel liner hanger 125 MYS Setting ball
for horizontal, vertical, or deviated wells. Hanger design protects slips from
damage, and running tool design prevents unplanned release. Robust torque-ring Tool joint connection
clutch and retaining dogs enable rotation and reciprocation during installation. 4.5-in. XT-39
TBR debris barrier
Vectraset Hydraulic-Set Liner Hanger Assembly
TM
Packer setting
cone
Key Features Liner top
packer seal
• The one-piece, high-strength mandrel has no hidden connections. Aflas
• Two-step hanger actuation sequence (hydraulic then mechanical) precludes unintentional running
tool release.
Hanger cone
• Pressure is contained within the running tool when setting the hanger slips, preventing surge forces 125 MYS
on the liner and formation and saving time and displacement fluid.
• The hanger slips are set prior to cementing for maximum reliability (no reliance on plug bumping). Hanger slips Torque ring clutch
4140-45, 110 Ksi MYS
• The large bypass flow area through the set hanger slips facilitates circulation and cementing. assembly detail Liner-top-packer
Torque @upper-end
• The mechanically set, expanding-metal, liner-top packer has a bonded elastomeric cover that will not fingers: 25,000 lb-ft setting-dog assembly
swab off during circulation and cementing. Hanger cylinder
125 MYS Upper packoff assembly
• The packer seal, hanger cylinder, and tieback seal are rated to 15,000 (103.4 MPa) at 350° F (177° C).
Seal stack: Vee packing configuration
• A 20-ft (6.1-m) floating-seal tieback receptacle is standard. Other lengths are available on request. Hanger mandrel GF (PTFE/HNBR-Kevlar/virgin PEEK)
body 90 Duro Viton O-ring
Customer-specific
thread 125 MYS Contingency release
Available Sizes Left-hand turn engages float nut for
right-hand release.
Liner Size and Weight Casing Size and Weight
Right-hand-release float nut
4.5 in. 11.6 lb/ft–13.5 lb/ft and 15.1 lb/ft 7.0 in. 23 lb/ft–26 lb/ft Attaches running tool to hanger
4.5 in. 11.6 lb/ft–13.5 lb/ft and 15.1 lb/ft 7.0 in. 29 lb/ft–32 lb/ft during deployment. Mechanically
releases the running tool after the
114.3 mm 17.26 kg/m–20.09 kg/m, and 22.5 kg/m 177.8 mm 34.23 kg/m–38.7 kg/m hanger assembly is set hydraulically.
114.3 mm 17.26 kg/m–20.09 kg/m, and 22.5 kg/m 177.8 mm 43.20 kg/m–47.6 kg/m
Dimensions and Ratings Retaining dogs Hanger slip-actuating
Hanger mandrel nominal ID 3.64 in. (92.5 mm) piston detail
Cylinder API burst = 15,000 psi
Torque @upper-end fingers 25,000 lb-ft (33.9 kN-m) Cylinder API collapse = 15,000 psi Lower packoff assembly
Mandrel API burst strength, L-80 9,500 psi (65.5 MPa) Float nut LPA seal stack: Vee packing stack,
GF (PTFE/HNBR-Kevlar/virgin PEEK)
Mandrel API burst strength, P110 15,420 psi (106.2 MPa) 90 Duro Viton O-ring
Mandrel API collapse, L-80 8,600 psi (59.3 MPa)
Mandrel API collapse, P-110 14,600 psi (100.6 MPa)
Mandrel tension strength, L-80 270,000 lbf (20,096 daN)
Two-step release: The retaining dogs
Mandrel tension strength, P110 424,000 lbf (188,595 daN) retract after the slips are set, LWP releasing sub
then the running tool can be
rotated to release the float nut and
disconnect from the liner hanger.
Note: Product information and specifications presented herein are subject to change without notice to reflect improved design or operation or otherwise. In no case shall the Liner wiper plug
information be considered a part of our terms and conditions of sale. LWP releasing sub
