DWG PART Dash S

Approx
QTY DESCRIPTION MATERIAL L IN(MM) Weight
REF NUMBER Length IN(MM)
LB(KG)
SHELL 18.00 3
-B1 Any
Filament Wound Epoxy/Glass composites - (457) (1)
25.00 4
1 1 200016 SHELL Head locking grooves integrally wound in -C1
(635)
Any
(2)
place. 44.00 25 9
-1
HEAD (1118) (635) (4)
84.00 56 16
-2
2 2 95929 End plug Sub-assembly Engineering Thermoplastic. (2134) (1422) (7)
124.00 80 23
3 2 45317 Head Seal Ethylene Propylene - O - Ring -3
(3150) (2032) (11)
4 2 45296 PWT Seal Ethylene Propylene - O - Ring
HEAD INTERLOCK
5 2 46414 Retaining Ring SS 316 as per SA-479 ASME Edition 2015.
VESSEL SUPPORT
6 2 45058 Saddle-Optional Engineering Thermoplastic.

7 2 47459 Strap Assembly-Optional 304 Stainless Steel-PVC Cushion.

8 4 97821 Strap screw-Optional 5/16-18 UNC, 1.5" L, 18-8 Stainless Steel.

RATING: PRECAUTIONS: ORDERING:

DESIGN PRESSURE……………………………300 PSI DO…read, understand and follow all instructions; Using the chart below, please check the features Please note that we require your membrane
(2.07 Mpa) failure to take every precaution will void you require and fax them with your purchase brand and model number when ordering. If
MAX. OPERATING TEMP……...………………..120°F warranty and may result in vessel failure order to our customer service department for this information is not initially available,
(49°C) DO…mount the shell on horizontal members at span expedited processing. you may provide it at a later date by
MIN. OPERATING TEMP……...…………………..20°F “S” using complaint vessel supports furnished; For optional materials and/or features not listed checking the appropriate box below.
(-7°C) tighten hold down straps just snug below, please consult factory for pricing and
FACTORY TEST PRESSURE………………450 PSIG DO…provide flexibility in, and support for piping availability.
(3.10 MPa) manifolds so that vessel can grow in length
BURST PRESSURE……..………………….….1200 PSI under pressure without undue restraint; provide VESSEL LENGTH CODE – please check one
(8.27 MPa) additional flexible joints in large pipes leading to
manifold header ECOLINE MODEL 40L30N -B1 -C1 -1 -2 -3
INTENDED USE: DO…provide overpressure protection for vessel set
LENGTH
at not more than 105% of design pressure ELEMENT CAPACITY
The Ecoline Model 40L30N Fiberglass RO/UF Pressure CODE
DO…inspect end closures regularly; replace -B1 One 14” Direct Connect
Vessel is designed for continuous, long term use as
components that have deteriorated and correct -C1 One 21” Direct Connect
housing for reverse osmosis and ultrafiltration elements -1 One 40” Direct Connect
causes of corrosion
in typical industrial water treatment systems at pressures -2 Two 40” Direct Connect
up to 300 psi. Any make of four-inch nominal diameter -3 Three 40” Direct Connect
DO NOT…work on any component until first
spiral-wound element with a ¾’’ dia male product water
verifying that pressure is relieved from vessel
tube is easily accommodated.
DO NOT… make rigid piping connections to ports MEMBRANE BRAND AND MODEL – please check one and fill in information
or clamp vessel in any way that resists growth of
The Ecoline Model 40L30N must be installed, operated
and maintained in accordance with the listed precautions fiberglass shell under pressure; ∆DIA = 0.01 in. Please supply end plugs for the following membrane brand and specific model
and good industrial practice to assure safe operation over (0.25mm) and ∆L = 0.03 in. (0.8mm) for a length Brand_________________________Model_______________________
a long service life. code –1 vessel
DO NOT… hang piping manifolds from ports or use Membrane brand and model information is not available, but will be supplied to Pentair on or
The high performance reinforced plastic shell must be vessel in any way to support other components. before the following date _____/________/_______
allowed to expand under pressure; undue restraint at DO NOT… operate vessel at pressures and
support points or piping connections can cause leaks to temperatures in excess of its rating CERTIFICATION – please check one
develop in the shell. The end closures, incorporating DO NOT… operate vessel without element installed.
close-fitting, interlocking metal components, must be DO NOT… operate vessel with permeate pressure in CE Marked.(Not applicable for -1 vessel)
kept dry and free of corrosion; deterioration can lead to excess of 125 psi at 120°F (0.86 MPa @ 49°C)
catastrophic mechanical failure of the heads. DO NOT… overtighten the connection to the EXTERIOR FINISH
permeate port (hand-tighten plus one-quarter Standard – White high-gloss RAL 9003 polyurethane coating over sanded surface.
Pentair will assist the purchaser in determining the turn, check for leaks) Optional – Grey high-gloss RAL 7011 polyurethane coating over sanded surface.
suitability of this standard vessel for their specific DO NOT… tolerate leaks or allow end closures to Serial number Opposite
operating conditions. The final determination however, be routinely wetted in any way End End PERMEATE PORT CONFIGURATION
including evaluation of the standard material of DO NOT… pressurize vessel until double-checking Standard – ½’’ NPT Female (Standard per drawing)
construction for compatibility with the specific corrosive to verify that the retaining ring is completely Optional - ½’’ BSPT/JISPT Female
environment, shall be the responsibility of the purchaser. inside the groove
Alternate materials with enhanced corrosion resistance DO NOT… operate outside the pH range 3-11 FEED PORT CONFIGURATION
are available on special order. Standard – ¾” NPT Female (Standard per drawing)
Optional – ¾’’ BSPT/JISPT Female
Specifications are subject to change without notice. Optional – ½’’ NPT Female

CAUTION: END PLUG MATERIALS

EYE PROTECTION SHOULD BE WORN WHEN Standard – Noryl ¾’’ NPT Female FC port & ½” NPT Female Permport connection (P/N 96288)
REMOVING OR INSTALLING RETAINING RINGS. Optional - PVC ½” NPT Female FC port & ½” NPT Female Permport connection (P/N 97592)
NOTE KEEP FINGERS CLEAR FROM RETAINING RING
Spiral Retaining Ring Removal Tool (50303) WHILE INSTALLING LAST OF TWO TURNS. RING
Recommended to open and close vessel. NOTE:- PVC end plug only with ½” NPT FC port.
MAY SNAP INTO POSITION POSSIBLY PINCHING
FINGERS.

For complete information on proper use of the vessel

Please refer to 40L30N USER’S GUIDE - 95207

DWG. NO. 99373-F. © PENTAIR PAGE 2 OF 2.