Format Rev: C
EN 685373 1 2 3 4 5 6 7 8
NOTES REV DESCRIPTION OF CHANGE LOC BY E.N. DATE
01. MATERIAL:M FE 710 EA10 F32 Z1 Z2 ACCORDING TO NTW 40603 A INITIAL RELEASE - MOREAB TBD 04-JAN-2025
Z1 - RESISTANCE TO FUNGUS AS LEVEL 2 (TWO) ACCORDING TO NTW 82001
Z2 - TASTE AND SMELL AS CLASS 0 (ZERO) ACCORDING TO NTW 82003
02. COLOR: TRANSPARENT
03. THIS PART MUST WITHSTAND HYDRAULIC PRESSURE OF 1.5 BARS [22 PSIG] AND BURST PRESSURE OF 2 BARS [29 PSIG]
04. THE PART MUST MEET THE WHIRLPOOL RESTRICTED MATERIAL APPROVAL AS PER GES0084
A 04. THIS PART IS EXPECTED TO COME INTO CONTACT WITH FOOD AND/OR POTABLE WATER.
COMPONENT(S) REFERENCED HEREIN SHALL COMPLY WITH WHIRLPOOL'S CURRENT GLOBAL WATER CONTACT SPECIFICATION, A
W11365926 (REFER TO ASIA REGULATION AS PER IS 10500).
B 0.20
OUTER DIAMETER
B B
E
C L
N TI A
A N T
C 0.20 V I N 5
INNER DIAMETER D R DE 02
A P I -2
C F R C
N -MA
O
C 01
A
PRELIMINARY
D DO NOT USE FOR PRODUCTION - DO NOT USE FOR TOOLING D
FOR QUOTATION ONLY
LIST REQUESTED DEVIATIONS FROM DRAWING DIMENSIONS,
TOLERANCES OR SPECIFICATIONS IN THE
"COMMENTS" PORTION OF THE REQUEST FOR QUOTE
E THIS DRAWING IS THE PROPERTY OF WHIRLPOOL CORP. IT CONTAINS CONFIDENTIAL INFORMATION BELONGING TO AND/OR
E
ENTRUSTED TO WHIRLPOOL. IT IS DISCLOSED IN CONFIDENCE AND SHALL NOT BE HELD, REPRODUCED, DISCLOSED OR USED
EXCEPT IN A MANNER AND FOR A PURPOSE EXPRESSLY PERMITTED BY WHIRLPOOL IN WRITING.
VENDORS SHALL NOT REVISE ANY PHYSICAL, DIMENSIONAL, OR PERFORMANCE CHARACTERISTICS UNLESS AUTHORIZED IN
WRITING BY WHIRLPOOL ENGINEERING GROUP.
W11771595 PRE00 60 2.0 1/2" 3/8"
WHIRLPOOL TEST SPECIFICATIONS, IF ANY, ARE NOT INTENDED TO ASSUME ANY RESPONSIBILITY FOR SUBSEQUENT PROBLEMS
WITH OR CAUSED BY THE PART, COMPONENT, OR ASSEMBLY PROVIDED BY THE SUPPLIER, AND DO NOT RELIEVE THE SUPPLIER
W11771594 PRE00 60 2.0 1/2" 5/16" OF ITS OBLIGATIONS INCLUDING, BUT NOT LIMITED TO, THE NEED TO PERFORM ITS OWN TESTING, INSPECTION AND
ONGOING QUALITY CONTROL, AND ASSURING FITNESS FOR USE. ANY WHIRLPOOL RECOMMENDED TEST AND ITS OUTCOME
DO NOT IN ANYWAY LIMIT OR CHANGE THE WARRANTY CONTAINED IN WHIRLPOOL'S PURCHASE ORDER OR SUPPLY AGREEMENT.
W11748818 PRE00 60 2.0 7/16" 5/16" METRIC THIRD ANGLE CREATION DATE
DIMENSIONS IN mm PROJECTION
INTERPRETATION PER ASME Y14.5M-1994 13-JAN-2025
DEFAULT SCALE
W11771593 PRE00 60 2.0 1/2" 3/8" SILICONE TBD 5:1 DRAWN BY
DO NOT SCALE PRINT = SPECIAL CHARACTERISTIC MOREAB
W11771592 PRE00 60 2.0 1/2" 5/16" DESCRIPTION (ENGLISH)
F SUCTION HOSE 3/8 " F
W11771591 PRE00 60 2.0 7/16" 5/16"
DESCRIPTION (LOCAL)
W11771590 PRE00 60 2.0 3/8" 1/4" SILICONE TUBING
DRAWING SIZE SHEET DRAWING NUMBER DRAWING REV
DIM "A" DIM "B" DIM "C"
PART NO. REV
MILLIMETERS INCHES INCHES
ENG MATL NUMBER/SPEC
MATL DESC A2 1 OF 1 W11748818 A
1 2 3 4 5 6 7 8
