SAFETY DATA SHEET
1: IDENTIFICATION OF THE SUBSTANCE/PREPARATION OF THE
COMPANY/UNDERTAKING
Product Name: NITOCOTE EPU BASE
Application: Base component of two-part protective coating.
Company: Al Gurg Fosroc LLC
Address: P O Box 657, Dubai, United Arab Emirates
Telephone: +971 4 2858606 Fax:+971 4 2859649
2: COMPOSITION/INFORMATION ON INGREDIENTS
Composition: epoxy resin, polyurethane resin, 1-methoxy-2-propanol, inert fillers, pigment.
Hazardous Ingredient(s) Symbol Risk Phrases Other Information %
epoxy resin (number average Xi R36/38, 43 Cas No: 25068-38-6 >30 <60
molecular wt <700)
1-methoxy-2-propanol none R10 CAS No: 107-98-2 >1.5< 4
All constituents of this product are listed in EINECS (European Inventory of Existing Commercial Chemical Substances) or
ELINCS (European List of New Chemical Substances) or are exempt.
Refer to Section 8 for Occupational Exposure Limits.
3: HAZARDS IDENTIFICATION
X Irritant: Harmful by inhalation and in contact with skin.
May cause sensitisation by skin contact.
Flammable
4: FIRST AID MEASURES
Eyes: Irrigate immediately with copious quantities of water for several minutes. Obtain medical attention urgently.
Skin: Wash immediately with soap and water or suitable skin cleanser as soon as possible. Obtain medical advice if
skin disorders develop.
Inhalation: Remove from exposure, rest and keep warm and obtain medical attention urgently.
Ingestion: Obtain medical attention urgently. Do NOT induce vomiting. Beware of aspiration if vomiting occurs.
5: FIRE FIGHTING MEASURES
Suitable Extinguishing Media: Carbon dioxide, powder, foam or water fog - do not use water jets.
Special Exposure Hazards: Toxic fumes.
Issue No: 01 Date: 08.06.03 Product Name: NITOCOTE EPU BASE Page 1 of 5
Special Protective Equipment: Self-contained breathing apparatus.
6: ACCIDENTAL RELEASE MEASURES
Personal Precautions: Immediately issue NO SMOKING and NO NAKED FLAMES warnings. Wear
suitable protective clothing, gloves and eye/face protection.
Environmental Precautions: Prevent entry into drains, sewers and water courses.
Decontamination Procedures: Soak up with inert absorbent or container and remove by best available means. Gather into
containers. Dispose of as waste.
7: HANDLING AND STORAGE
Handling: Maintain good standards of personal hygiene. Avoid skin and eye contact. Do not eat, drink or smoke whilst
using this product. Ensure adequate ventialtion. In case of insufficient ventilation, wear suitable respiratory
equipment.
Storage: Store in conformity with local fire regulations. Store away from sources of ignition. Store in a cool place away
from sources of heat and out of direct sunlight to avoid pressure build up.
8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits:
Substance 8 Hour TWA STEL Source/Other Information
1-Methoxypropan-2-ol 360 mgm-3 1080 mgm-3 EH40
Engineering Control Measures: Use only in well ventilated areas. Local exhaust ventilation is recommended.
Personal Protective Equipment: Impervious gloves (e.g. PVC), goggles. In case of insufficient ventilation wear suitable
respiratory equipment. Change contaminated clothing immediately and clean before
re-use.
9: PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid.
Colour: Pigmented.
Odour: Aromatic.
Boiling Point/Range (oC): 135-150
Flash Point (closed, oC): 35
o
Autoflammability ( C): Autoignition temperature: approx 300
Explosive Properties (%): Lower explosive limit (LEL): 1.0 % Upper explosive limit (UEL): 11.5%
Oxidising Properties: Not determined
Vapour Pressure (kPa at 20oC): approx 0.8
Relative Density (at 20oC): 1.45
Water Solubility: Insoluble.
10: STABILITY AND REACTIVITY
Stability: Contains volatile solvent. Stable: reacts with compounds containing amino,
hydroxyl or carboxyl groups to give stable, cross linked materials.
Issue No: 01 Date: 08.06.03 Product Name: NITOCOTE EPU BASE Page 2 of 5
Conditions to Avoid: Any source of ignition.
Materials to Avoid: Strong oxidising agents. Strong acids. Strong alkalis.
Hazardous Decomposition Products: Thermal decomposition - oxides of carbon. Toxic fumes.
11: TOXICOLOGICAL INFORMATION
The following toxicological assessment is based on a knowledge of the toxicity of the product's components: Oral LD50, rat 2
g/kg. Classified as a skin sensitiser.
Health Effects
On Eyes: Irritating and may injure eye tissue if not removed promptly. Vapour may cause irritation.
On Skin: Irritation. May cause sensitisation. Harmful by absorption through the skin. May defat the skin.
By Inhalation: Harmful by inhalation. Vapours may cause headaches, dizziness and central nervous system depression. High
concentrations of vapour can cause narcosis and asphyxiation.
By Ingestion: May cause irritation of mouth, throat and digestive tract. Aspiration of liquid during ingestion or from vomiting
may cause severe chemical pneumonitis.
Chronic: Repeated or prolonged skin contact may lead to skin disorders.
12: ECOLOGICAL INFORMATION
Environmental Assessment: Contains volatile organic compounds.
Mobility: Mobile liquid. Contains volatile components. Insoluble in water.
Persistence and Degradability: Expected to be not readily biodegradable.
Bioaccumulative Potential: Not expected to be bioaccumulative.
Ecotoxicity: Expected to be ecotoxic to fish/daphnia/algae.
13: DISPOSAL CONSIDERATIONS
Disposal must be in accordance with local and national legislation.
Unused Product: Dispose of through an authorised waste contractor to a licensed site.
Used/Contaminated Product: As for unused product.
Packaging: Must be disposed of through an authorised waste contractor.
14: TRANSPORT INFORMATION
UN/SI Number: 1263
IMO: Class: 3.3 Packing Group: III Marine Pollutant: No
IATA/ICAO: Class: 3 Packing Group: III
ADR: Class: 3 Item: 31 (c)
Transport Name: Paint Related Material (Xylene Mixture)
Hazchem/Kemler Code: 3Y/30
15: REGULATORY INFORMATION
Hazard Label Data:
Issue No: 01 Date: 08.06.03 Product Name: NITOCOTE EPU BASE Page 3 of 5
Named Ingredients: epoxy resin (number average molecular weight <700).
Xylene, 1-methoxy-2 propanol
UN Number: 1263
Symbol(s) Xn
Risk Phrases: Flammable.
Harmful by inhalation and in contact with skin.
Irritating to eyes and skin.
May cause sensitisation by skin contact.
Safety Phrases: Keep away from sources of ignition - no smoking.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
Use only in well-ventilated areas.
Contains epoxy constituents. See information supplied by the manufacturer.
EC Directives: Dangerous Substances Directive 67/548/EEC and adaptations.
Dangerous Preparations Directive, 88/379/EEC.
Safety Data Sheets Directive, 91/155/EEC.
Statutory Instruments: Chemicals (Hazard Information an d Packaging) Regs. 1993 (SI 1746).
Control of Substances Hazardous to Health Regs. 1988 (SI 1657).
Health & Safety at Work, etc Act 1974.
Environmental Protection (Duty of Care) Regs 1991 (SI 2839).
Highly Flammable Liquids & Liquefied Petroleum Gases Regs. 1972 (SI 917).
Codes of Practice: Waste Management. The Duty of Care.
Guidance Notes: Occupational skin diseases: health and safety precautions (EH 26).
Occupational exposure limits (EH40).
The storage of highly flammable liquids (CS 2).
The above publications are available from HMSO.
16: OTHER INFORMATION
Also refer to the Safety Data Sheet(s) for information on other components of this product.
The data and advice given apply when the product is used for the stated application or applications. The product is not sold as suitable for any
other application. Use of the product for applications other than as stated in this sheet may give rise to risks not mentioned in this sheet. The
product should not be used other than for the stated application or applications without seeking advice from Al Gurg Fosroc.
If this product has been purchased for supply to a third party for use at work, it is the purchaser's duty to take all necessary steps to secure that
any person handling or using the product is provided with the information in this sheet.
It is the responsibility and duty of the employer to inform employees and others who may be affected of any hazards described in this sheet and
of any precautions which should be taken.
This sheet does not constitute or substitute for the users own assessment of workplace risk, as required by other health and safety legislation.
Further copies of this Safety Data Sheet may be obtained from Al Gurg Fosroc LLC.
Date Printed: 08.06.2003 SDS Reference:
Issue No: 01 Date: 08.06.03 Product Name: NITOCOTE EPU BASE Page 4 of 5
SAFETY DATA SHEET
1: IDENTIFICATION OF THE SUBSTANCE/PREPARATION OF THE
COMPANY/UNDERTAKING
Product Name: NITOCOTE EPU HARDENER
Application: Hardener component of two-part coating.
Company: Al Gurg Fosroc LLC
Address: P O Box 657, Dubai, United Arab Emirates
Telephone: +971 4 2858606 Fax:+971 4 2859649
2: COMPOSITION/INFORMATION ON INGREDIENTS
Composition: aliphatic amine, 1-methoxy-2-propanol, butanol.
Hazardous Ingredient(s) Symbol Risk Phrases Other Information %
1-methoxy-3-propanol none R10 Cas No: 107-98-2 >2 <5
butanol Xn R10, 20 Cas No: 71-36-3(1) >2 <5
modified aliphatic amine Corrosive R 10 Trade Secret formula >10<15
All constituents of this product are listed in EINECS (European Inventory of Existing Commercial Chemical Substances) or
ELINCS (European List of New Chemical Substances) or are exempt.
Refer to Section 8 for Occupational Exposure Limits.
3: HAZARDS IDENTIFICATION
Harmful by inhalation, in contact with skin.
May cause sensitisation by skin contact. Corrosive Flammable
4: FIRST AID MEASURES
Eyes: Irrigate immediately with copious quantities of water for several minutes. Obtain medical attention urgently.
Skin: Wash immediately with soap and water or suitable skin cleanser as soon as possible. Remove contaminated
clothing immediately.
Inhalation: Remove from exposure, rest and keep warm and obtain medical attention urgently.
Ingestion: Obtain medical attention urgently. Do NOT induce vomiting. Beware of aspiration if vomiting occurs.
5: FIRE FIGHTING MEASURES
Suitable Extinguishing Media: Carbon dioxide, powder, foam or water fog - do not use water jets.
Special Exposure Hazards: Toxic fumes. Nitrogen compounds. For further information see Section 10.
Special Protective Equipment: Self-contained breathing apparatus.
Issue No: 01 Date: 8.06.03 Product Name: NITOCOTE EPU HARDENER Page 5 of 5
6: ACCIDENTAL RELEASE MEASURES
Personal Precautions: Immediately issue NO SMOKING and NO NAKED FLAMES warnings. Wear
suitable protective clothing, gloves and eye/face protection.
Environmental Precautions: Prevent entry into drains, sewers and water courses.
Decontamination Procedures: Soak up with inert absorbent or container and remove by best available means. Gather into
containers. Dispose of as waste. Clean contaminated area with water.
7: HANDLING AND STORAGE
Handling: Maintain good standards of personal hygiene. Avoid skin and eye contact. Do not eat, drink or smoke whilst
using this product.
Storage: Store in conformity with local fire regulations. Store away from sources of ignition. Store in a cool place away
from sources of heat and out of direct sunlight to avoid pressure build up.
8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits:
Substance 8 Hour TWA STEL Source/Other Information
-3
butan-1-ol 150 mgm EH40
1-methoxypropan-2-ol 360 mgm-3 1080 mgm-3 EH40
Engineering Control Measures: Use only in well ventilated areas. Local exhaust ventilation is recommended.
Personal Protective Equipment: Impervious gloves (e.g. PVC), goggles. In case of insufficient ventilation wear suitable
respiratory equipment. Change contaminated clothing immediately and clean before
re-use.
9: PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid.
Colour: Amber.
Odour: Sharp/aromatic.
Boiling Point/Range (oC): 116 - 130
Melting Point/Range (oC): Not applicable.
o
Flash Point (closed, C): 23
o
Autoflammability ( C): Autoignition temperature: ~300
Explosive Properties (%): Lower explosive limit (LEL): 1.0 % Upper explosive limit (UEL): 11.5%
Oxidising Properties: Not determined
Vapour Pressure (kPa at 20oC): ~0.6
Relative Density (at 20oC): 0.96
Water Solubility: Partially soluble.
10: STABILITY AND REACTIVITY
Stability: Contains volatile solvent.
Conditions to Avoid: Any source of ignition.
Issue No: 01 Date: 8.06.03 Product Name: NITOCOTE EPU HARDENER Page 6 of 5
Materials to Avoid: Strong oxidising agents. Strong acids. Strong alkalis.
Hazardous Decomposition Products: Thermal decomposition - oxides of carbon. Nitrogen compounds, in some fire
circumstances, hydrogen cyanide.
11: TOXICOLOGICAL INFORMATION
The following toxicological assessment is based on a knowledge of the toxicity of the product's components: Oral LD50, rat 2
g/kg. Classified as a skin sensitiser.
Health Effects
On Eyes: Irritaitng and may injure eye tissue if not removed promptly. Vapour may cause irritation.
On Skin: Irritation. May cause sensitisation. Harmful by absorption through the skin. may defat the skin.
By Inhalation: Harmful by inhalation. Vapours may cause headaches, dizziness and central nervous system depression. High
concentrations of vapour can cause narcosis and asphyxiation.
By Ingestion: May cause irritation of mouth, throat and digestive tract. Aspiration of liquid during ingestion or from vomiting
may cause sever chemical pneumonitis.
Chronic: Repeated or prolonged skin contact may lead to skin disorders.
12: ECOLOGICAL INFORMATION
Environmental Assessment: Contains volatile organic compounds.
Mobility: Mobile liquid. Contains volatile components. Paritally soluble in water.
Persistence and Degradability: Expected to be not readily biodegradable.
Bioaccumulative Potential: Not expected to be bioaccumulative.
Ecotoxicity: Ecotoxic to fish/daphnia/algae.
13: DISPOSAL CONSIDERATIONS
Disposal must be in accordance with local and national legislation.
Unused Product: Dispose of through an authorised waste contracto to a licensed site.
Used/Contaminated Product: As for Unused Product.
Packaging: Must be disposed of through an authorised waste contractor.
14: TRANSPORT INFORMATION
UN/SI Number: 1263
IMO: Class: 3.3 Packing Group: III Marine Pollutant: No
IATA/ICAO: Class: 3 Packing Group: III
ADR: Class: 3 Item: 31 (c)
Transport Name: Paint Related Material /Butanol Mixture)
Hazchem/Kemler Code: 3Y/30
15: REGULATORY INFORMATION
Hazard Label Data:
Issue No: 01 Date: 8.06.03 Product Name: NITOCOTE EPU HARDENER Page 7 of 5
Named Ingredients: I methoxy 2-propanol, butanol
ethylene diamine
UN Number: 1263
Symbol(s) Xn
Risk Phrases: Flammable.
Harmful by inhalation and in contact with skin.
Irritating to eyes and skin.
May cause sensitisation by skin contact.
Safety Phrases: Keep away from sources of ignition - no smoking.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/fact protection.
Use only in well ventilated areas.
EC Directives: Dangerous Substances Directive 67/548/EEC and adaptations.
Dangerous Preparations Directive, 88/379/EEC.
Safety Data Sheets Directive, 91/155/EEC.
Statutory Instruments: Chemicals (Hazard Information an d Packaging) Regs. 1993 (SI 1746).
Control of Substances Hazardous to Health Regs. 1988 (SI 1657).
Health & Safety at Work, etc Act 1974.
Environmental Protection Act 1990.
Highly Flammable Liquids & Liquefied Petroleum Gases Regs 1972 (SI917).
Codes of Practice: Waste Management. The Duty of Care.
Guidance Notes: Occupational skin diseases: health and safety precautions (EH 26).
Occupational exposure limits (EH40).
The storage of highly flammable liquids (CS 2).
The above publications are available from HMSO.
16: OTHER INFORMATION
Also refer to the Safety Data Sheet(s) for information on other components of this product.
The data and advice given apply when the product is used for the stated application or applications. The product is not sold as suitable for any
other application. Use of the product for applications other than as stated in this sheet may give rise to risks not mentioned in this sheet. The
product should not be used other than for the stated application or applications without seeking advice from Al Gurg Fosroc.
If this product has been purchased for supply to a third party for use at work, it is the purchaser's duty to take all necessary steps to secure that
any person handling or using the product is provided with the information in this sheet.
It is the responsibility and duty of the employer to inform employees and others who may be affected of any hazards described in this sheet and
of any precautions which should be taken.
This sheet does not constitute or substitute for the users own assessment of workplace risk, as required by other health and safety legislation.
Further copies of this Safety Data Sheet may be obtained from Al Gurg Fosroc LLC.
Date Printed: 8.06.2003 SDS Reference:
Issue No: 01 Date: 8.06.03 Product Name: NITOCOTE EPU HARDENER Page 8 of 5
