<SUPPLEMENT-III>
AUTOMATIC TRANSMISSION
MODIFICATION NOTICE:
SECTION AT
+ Wiring diagrams have been changed.
CONTENTS
PRECAUTIONS ................................................... 3002 RE4R03A
Supplemental Restraint System (SRS) “AIR
OVERALL SYSTEM ............................................ 3003
BAG” and “SEAT BELT PRE-TENSIONER” ... 3002
Circuit Diagram ................................................ 3003
Wiring Diagram — A/T —................................ 3004
AT
PRECAUTIONS
Supplemental Restraint System (SRS) “AIR
BAG” and “SEAT BELT PRE-TENSIONER”
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER” used along
with a seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. The SRS system composition which is available to NISSAN MODEL Y61 is as follows (The
composition varies according to the destination and optional equipment.):
+ For a frontal collision
The Supplemental Restraint System consists of driver air bag module (located in the center of the
steering wheel), front passenger air bag module (located on the instrument panel on passenger side),
seat belt pre-tensioners, a diagnosis sensor unit, warning lamp, wiring harness and spiral cable.
+ For a side collision
The Supplemental Restraint System consists of front side air bag module (located in the outer side of
front seat), satellite sensor, diagnosis sensor unit (one of components of air bags for a frontal collision),
wiring harness, warning lamp (one of components of air bags for a frontal collision).
Information necessary to service the system safely is included in the RS section of this Service Manual.
WARNING:
+ To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance should be per-
formed by an authorized NISSAN dealer.
+ Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and
Air Bag Module, see the RS section.
+ Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow harness connector.
AT-3002
OVERALL SYSTEM RE4R03A
Circuit Diagram
TAT059M
AT-3003
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T —
TAT061M
AT-3004
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT108M
AT-3005
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT109M
AT-3006
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT122M
AT-3007
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT111M
AT-3008
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT112M
AT-3009
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT128M
AT-3010
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
TAT114M
AT-3011
OVERALL SYSTEM RE4R03A
Wiring Diagram — A/T — (Cont’d)
AT-3012
