KANATOL - 900
DI ISO NONYL PHTHALATE (DINP)
Primary plasticizer for PVC and PVC copolymers
Chemical Nature Phthalic acid ester of C9 alcohol
Chemical Name :- Di Iso Nonyl Phthalate
Trade Name :- DINP
Molecular Formula :- C26H42O4
Molecular Weight :- 418
Molecular Structure :- C26H42O4
O
II CH3
- C - O - CH2 - CH2 - CH2 - CH2 - CH2 - CH2 - CH
CH3
CH3
- C - O - CH2 - CH2 - CH2 - CH2 - CH2 - CH2 - CH
II CH3
O
CAS Number :- 28553-12-0
UN. NO :-
EINECS NO :- 249-079-5
Specification Characteristics Unit Test Method Value
Colour HU ASTM-D-1045-86 20 max.
Volatile Loss (130°C/3 Hrs) wt..% KLJTM 0.10max.
Ester Value mg KOH/g ASTM-D-1045-86 265 – 270.
Acidity wt..% ASTM-D-1045-86 0.010 max.
Moisture wt..% ASTM-E-203 0.10 max.
Specific Gravity (27°C) - ASTM-D-1045-86 0.970–0.976.
Ester content wt..% ASTM-D-1045-86 99.50 min.
Heat Stability (180°C/2 Hrs) HU ISI-9591-96 No Change.
Acidity after heat treatment wt..% ASTM-D-1045-86 0.03.
Plasticizing Esters by GC % by area KLJTM 99.50 min.
Residual alcohol % by area KLJTM 0.10 max.
Typical Properties
11
Volume Resistivity Ohmcm KLJTM 2.5±0.2X10
Boiling Point @ 7 mbar °C lit. 250.
Pour point °C lit. - 48.
Viscosity at 20°C cp KLJTM 79±3.
Refractive Index (27°C) - ASTM-D-1045-86 1.484–1.489.
Total Solution in Plasticizers
Contact: plasticizer@kljindia.com An ISO 9001:2000 and ISO 14001:2004 conglomerate www. kljindia.com
22
KANATOL - 900
Properties DINP is almost colourless and odourless oily liquid, free of foreign materials which
0
is slightly soluble in water ( 0.285mg/L at 24 C ) but soluble in alcohols, hexane
etc. It is miscible and compatible with all the monomeric plasticizers of PVC
compounding.
Application Around 95% of DINP is used in PVC as a plasticizer. More than half of the
remaining 5% is used in the production of polymers other than PVC (e.g.rubbers).
The remaining DINP used in non-polymer application including anticorrosion
paints, anti-fouling paints, lacquers, inks, adhesives and sealants.
DINP is a monomeric primary plasticizers of medium molecular weight and
fine performance. It has been developed to fulfill the need for an economical
plasticizer in formulation which require very low volatility and good
permanence characteristics. This products is widely used in vinylic
compounds including wires, cables and plastisols.
Plasticizing Efficiency 1.06
Compatibility with Limited in comparision of DOP.
Secondary Plasticizers
Packing & Storage DINP is packed in 200/225 kg iron drum / HDPE drum, 20 - 22 MT Flexi tank / ISO
tank / road tanker. It is stored in tightly closed container, in a cool, dry, ventilated
area.
Shelf Life Original characteristics remain intact for 24 months, if kept in recommended
storage.
Safety The MSDS can be provided on request.
Disclaimer The data contained in this publication are based on our current knowledge and
experience. During processing, there are so many factors which may affect the
application part of DINP, so these data neither imply any guarantee of certain
properties, nor the suitability of the product for the specific purpose. Any data given
in this publication may change without prior information and do not constitute the
agreed quality of our product.
Total Solution in Plasticizers
Contact: plasticizer@kljindia.com An ISO 9001:2000 and ISO 14001:2004 conglomerate www. kljindia.com
23
