PHOTOELECTRIC

Tubular sensors

S5 SERIEs

sensorS
The S5 series offers a range of plastic
tubular M18 photoelectric sensors.
The most varied optic functions can
be chosen amongst the fixed focus or
diffuse proximity models with short,
medium or long operating distances
reaching 60 cm; the 4 m retroreflex,
3 m polarised retroreflex and 1 m for
detection of transparent materials; the
12 m through beam and models with
fibre-optic connection.
Different versions with either axial or
radial optics are available. The series
offers connector or cable connection, 3
wire Vac versions or 4 wire Vdc versions
with complete configuration of the NPN/
PNP output and dark/light mode.
A red LED indicating the output status is
visible on the bottom side of the sensor.
The versions with trimmer adjustment
present also a green LED signalling
the switching stability according to the
received signal’s intensity.
The rugged ABS housing always
guarantees IP67 protection.

highlights APPLICAtions
Ceramics Beverage & Bottling
• Wide versatility of optic functions and
connections
• High operating distances for all
functions
• Models with trimmer adjustment and
stability LED
• Rugged and impermeable plastic
housing

Transportation lines Packaging lines

 TECHNICAL DATA DETECTION DIAGRAMS
10 ... 30 Vdc (d.c. vers.),
Power supply:
reverse polarity protection
S5-x-C10-x
White R90%
15 ... 264 Vac (a.c. vers.)
Grey R18%
Consumption: 30 mA max. (d.c. vers.)
10 mA max. (a.c. vers.)
Light emission: infrared LED 880 nm
red LED 660 nm (B, E1 vers.)
Diffuse proximity operating distance: 1 ... 10 cm (C10 vers.), 1 ... 8 cm (C8 vers.)
1 ... 35 cm (C35 vers.), 1 ... 30 cm (C30 vers.)
1 ... 60 cm (C60 vers.)
Fixed focus operating distance: 15 mm with 1 mm spot (D15 vers.)
S5-x-C35-x
50 mm with 2 mm spot (D50 vers.)
Retroreflex operating distance: 0.1 ... 4 m (on R2) Grey R18%
White R90%
Polarised retroreflex operating distance: 0.1 ... 3 m (on R2)
Retroreflex for transparents op. distance: 0.1 ... 0.8 m (on R2)
Through beam operating distance: 0 ... 12 m (F/G12 vers.), 0 ... 8 cm (F/G8 vers.)
Operating distance with fibre-optics: 22 mm proximity (with OF-18-ST)
85 mm through beam (with OF-19-ST)
refer to OF series for other fibres
Setting: sensitivity trimmer
(A4, C8, C10, D15, D50, G vers. excluded) S5-x-C60-x
Indicators: red OUTPUT LED Grey R18%
White R90%
green STABILITY LED (d.c. vers.)
red POWER LED (G vers.)
Output type: NPN or PNP configurable (d.c. vers.)
SCR + bridge rectifier (a.c. vers.)
Saturation voltage: 2.5 V max. (vers. d.c.)
Output current: 150 mA max.(vers. d.c.), short-circuit prot.
100 mA max.(vers. a.c.)
Response time: 500 µs (D50 vers. ) S5-x-A4-x
R5
1 ms max. R2
2 ms (F vers. in d.c.)
20 ms max. (a.c. vers.)
Switching frequency: 1KHz (D50 vers.)
500 Hz max.
250 Hz max. (F vers. in d.c.)
25 Hz max. (a.c. vers.)
Operating mode: dark/light (configurable in 4 wires d.c. vers.)
Auxiliary functions: ‘test +’ and ‘test -’ inputs (G vers. in d.c.) S5-x-B3-x R5
Connection: 4-pole M12 connector or 2 m Ø 5 mm cable
R2
Electrical protection: class 1 (a.c. vers.); class 2 (d.c. vers.)
Mechanical protection: IP67
Housing material: ABS
Lens material: PMMA plastic
Weight: 25 g max. (connector vers.); 100 g max. (cable vers.)
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
S5-x-T1-x
Certifications: ( vers.d.c.) R5
The operating distances indicate the detection distance with excess gain 2. R2
S5-5-D50-92 S5-x-F/G-x
3,0
Grey R18% White R90%
2,0

1,0

0,0
(mm)

50
0 10 20 30 40

-1,0

-2,0 The detection diagrams indicate the typical operating distance

with excess gain 1.
-3,0
Distance (mm)

www.datalogic.com
 MoDE S5-5-x
MoDE (3 wires)
WHITE 2
The trimmer can be used to adjust sensitivity; the operating BLUE
distance3
BRoWN 12 + BRoWN4 1
TEST +
increases turning the trimmer clockwise. WHITE
150mA
NPN + 10 … 30 Vdc2
WHITE
150mA +
BLAcK
+
TEST -
10 … 30 Vdc
NPN
WARnIng: The trimmer rotation is limited to 270° by a mechanical
BLAcK
BLAcKstop.44 BLAcK 4
LoAD 150mA BLAcK 3
BLUE 4
AX PNP 0V

Do not apply excessive torque when adjusting (max 40 Nmm). PNP

BLUE Power supply:
3 BLUE 3 LoAD 150mA
0V 0V
POWER ON LED (S5-x-G8/G12) Ripple:
The red LED indicates that the sensor is operating. S5-1-xcurrent consumption S5-1-G8
CONNECTIONS BLAcK 1 (output current BLAcK
excluded):
1
M12 CONNECTOR output:
ConnECtIonS 15 … 264 Vac
48 … 62 Hz
BLUE 2
15 … 264 Vac
48 … 62 Hz

S5-5-x (4 wires) S5-5-G8/G12 (4 wires)

WHITE 3 output current:BLUE
LoAD
100mA max. 2

BRoWN
2
output saturation voltage: 1
BRoWN 1 1
+ + 10 … 30 Vdc Rated insulation
S5-5-x voltage:
(3 wires)
LIGHT DARK
10 … 30 Vdc output leakage:
BLUE 3
MoDE MoDE
+
WHITE 2
TEST +
BRoWN 1
3
+Response
10 … 30 Vdc
NPN
time:
BRoWN 1
4
+ 10 … 30 Vdc

WHITE 2 4 BLAcK 4 LoAD 150mA BLAcK 4

2 WHITE BLAcK
150mA
NPN 150mA + TEST -
BLUE 3 BLUE 3
PNP
LoAD 150mA

3 M12 connector
Switching
0V
frequency: 0V
BLAcK 4 BLAcK 4 BLUE
PNP 0V

M12 CONNECTOR
Indicators:
NOT USED +10...30 VDC
Setting:
S5-1-x S5-1-G8 (WHITE)
2 (BROWN)
operating temperature: 1
2 1
BLAcK 1 BLAcK 1 Storage temperature:
3 4
15 … 264 Vac
48 … 62 Hz
15 … 264 Vac 0VElectric
̶ 3 shock protection:
4PNP 100 mA
BLUE 2 48 … 62 Hz operating distance (BLACK)
(BLUE)
A4:
(minimum): B3:
LoAD c
WHITE 3 100mA max. BLUE 2
c
D50 model
c
D1
D1
S5-5-x (3 wires) F1
BRoWN 1 BRoWN 1 L
+ 10 … 30 Vdc + 10 … 30 Vdc T1:
NPN E1
BLAcK 4 LoAD 150mA BLAcK 4 E1
DIMENSIONs PNP Emission type:
AC AXIAL VERSION
BLUE 3 BLUE 3 DC AXIAL VERSION
LoAD 150mA
0V 0V Ambient light rejection:
Vibration:
output LED STABILITY LED output LED Shock resistance:
LIGHT/DARK selection:
power ON LED power ON LED
M12 CONNECTOR
Housing:
connector:
Lenses:
2 1 Protection class:
MODELS MODELS
with trimmer without trimmer with trimmer
without trimmer (except mod. B) mod. B
connections:
Weight:
3
M12
CONNECTOR
4 M12
CONNECTOR

RADIAL VERSION OPTIC FIBER VERSION

STABILITY LED output LED

output LED STABILITY LED

power ON LED

MODELS
mod. B mod. F/G other models

D50 Model

RECEIVER
output LED EMITTER
 MODEL selEction and order information
AXIAL OPTIC VERSIONS RADIAL OPTIC VERSIONS

4 WIRE CONNECTION
4 POLE CABLE M12 CONN. 4 POLE CABLE M12 CONN.
10-30Vdc
S5-5-C10-30 S5-5-C10-32 S5-5-C10-35 S5-5-C10-37
Short distance diffuse proximity
(G5210530) (G5210532) (G5210535) (G5210537)
S5-5-C35-30 S5-5-C35-32 S5-5-C35-35 S5-5-C35-37
Medium distance diffuse proximity
(G5210630) (G5210632) (G5210635) (G5210637)
S5-5-C60-30 S5-5-C60-32
Long distance diffuse proximity -- --
(952051640) (952051650)
S5-5-D15-30 S5-5-D15-32 S5-5-D15-35 S5-5-D15-37
Fixed focus proximity
(G5210430) (G5210432) (G5210435) (G5210437)
S5-5-A4-30 S5-5-A4-32
Retroreflex -- --
(G5210230) (G5210232)
S5-5-B3-30 S5-5-B3-32 S5-5-B3-35 S5-5-B3-37
Polarised retroreflex
(G5210730) (G5210732) (G5210735) (G5210737)
S5-5-T1-30 S5-5-T1-32
Retroreflex for transparents -- --
(952051680) (952051690)
S5-5-F12-30 S5-5-F12-32 S5-5-F8-35 S5-5-F8-37
Through beam receiver
(G5210130) (G5210132) (G5210135) (G5210137)
S5-5-G12-00 S5-5-G12-02 S5-5-G8-05 S5-5-G8-07
Through beam emitter
(G5210000) (G5210002) (G5210005) (G5210007)
S5-5-E1-30 S5-5-E1-32
Fibre-optic amplifier -- --
(G5210830) (G5210832)
3 WIRE CONNECTION
4 POLE CABLE M12 CONN. 4 POLE CABLE M12 CONN.
10-30Vdc
S5-5-D50-92
Fixed focus proximity -- -- --
(952051940)
3 WIRE CONNECTION CABLE - dark CABLE - light
CABLE - dark mode CABLE - light mode
15 - 264 Vac mode mode
S5-1-C8-10 S5-1-C8-20 S5-1-C8-15 S5-1-C8-25
Short distance diffuse proximity
(G5110510) (G5110520) (G5110515) (G5110525)
S5-1-C30-10 S5-1-C30-20 S5-1-C30-15 S5-1-C30-25
Medium distance diffuse proximity
(G5110610) (G5110620) (G5110615) (G5110625)
S5-1-D15-10 S5-1-D15-20
Fixed focus proximity -- --
(G5110410) (G5110420)
S5-1-A2-10 S5-1-A2-20 S5-1-A2-15 S5-1-A2-25
Retroreflex
(G5110210) (G5110220) (G5110215) (G5110225)
S5-1-F8-10 S5-1-F8-20
Through beam receiver -- --
(G5110110) (G5110120)
S5-1-G8-00 S5-1-G8-05
Through beam emitter
(G5110000) (G5110005)

ACCESSORy selction and order information

MODEL DESCRIPTION CODE N°
SP-40 fixed support for tubular M18 sensors 95ACC1370
SWING-18 adjustable support for plastic tubular M18 sensors 895000006
Please refer also to Sensor Accessories

The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo
variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the
products.

www.datalogic.com