Team Engineers
TEAMLINK 3004 SHDSL
   Solutions in Connectivity
  An ISO 9001 : 2008 Company
                                                             4Wire V35 G.SHDSL Modem
FEATURES
4 Wire Operation
Provides multi stage line protection as per K.20 and K.21
Configuration Through DIP Switches
External Secondary optional Line Protection Device optional
Long reach up to 11Kms. for standard 64Kbps speed
LED Indications for easy Monitoring
Front Panel Switches for Diagnostics or Loopbacks
Supports 230V AC and 48V DC with the Same Socket
                                                     TECHNICAL SPECIFICATIONS
G.SHDSL LINE INTERFACE
Line type              : 2 or 4 Wire twisted copper wire of 0.5mm Diameter
Line Code             : TCPAM as per the ITU-T G991.2 ( Annex –A and Annex –B )
Bandwidth              : Operates From 64Kbps to 2048Kbps
Line Impedance         : 135 Ohms
Transmit Signal Power : 16dBm +/- 0.5dBm
Operating Range in 2 Wire : 6 Kms. on 0.5mm diameter copper cable @ 2.048Mbps data rate
Operating Range in 4 Wire : 8 Kms. on 0.5mm diameter copper cable @ 2.048Mbps data rate
Operating Mode         : 2Wire or 4 Wire selection through DIP switches
Line protection                : As per ITU-T K20 and K21
Transmit Level                 : Up to 16dBm
Connector                      : RJ 45
Surge Protection               : Internal and Optional External Surge Protection
V35 INTERFACE SPECIFICATIONS
Interface Type          : V35
Data Rates              : 2.304 Mbps (n*64 Kbps, n=1 to 36)
Transmit Clock Modes : Internal/External/Recovered form line
Connector                : V34pin Female Connector
Configuration            : Through DIP Switches
Clock Polarity Selection : RXCLK and TXCLK
DIAGNOSTICS
Local Loopback, Digital Loopback and Remote Loopback as per the ITU-T V.54 standard
All loop back tests and BERT should be operated through Front Panel switches
Built in test 511 pattern generation and checking (BERT) for the DSL Line as well as the PCM E1 Checking
End to End Diagnostics and Status Monitoring is through the Embedded Operation Channel EOC without Interrupting the Data
MODEM CONFIGURATION AND STATUS MONITORING
Modem Configuration Through Dipswitches
Team Engineers
                                     TEAMLINK 3004 SHDSL
  Solutions in Connectivity
  An ISO 9001 : 2008 Company
                                                         4Wire V35 G.SHDSL Modem
MODEM LED INDICATIONS
PWR, MR, COT, DSL LINK, DTR, RTS, PAT, ERR, TST
POWER SUPPLY FOR BOTH THE G703 AND V35 MODEM
DUAL MODE AC/DC, 230VAC +/- 10% & –48VDC +/-10%
TEMPERATURE                : -5 To 60°C
HUMIDITY                   : Upto 95% non condensing
LINE PROTECTION            : As per ITU K.20/K.21
TEC Approval               :
                                          Team Engineers Advance Technologies India (P).Ltd
     Team Engineers
         Solutions in Connectivity
        An ISO 9001 : 2008 Company