ALUMINUM ELECTROLYTIC CAPACITORS

KZ
Premium Grade Type, For Audio Equipment

series

Premium grade “nichicon MUSE” acoustic series.

Ideally suited for first class audio equipment where qualitative and quantitative
comfortableness is required.
Compliant to the RoHS directive (2002/95/EC).

KZ High Grade FG

Specifications
Item Performance Characteristics
Category Temperature Range – 40 to +85°C
Rated Voltage Range 25 to 100V
Rated Capacitance Range 10 to 1000µF
Capacitance Tolerance ± 20% at 120Hz, 20°C
Leakage Current After 1 minute's application of rated voltage, leakage current is 0.01CV or less.
Measurement frequency : 120Hz, Temperature : 20°C
Tangent of loss angle (tan δ) Rated voltage (V) 25 50 100
tan δ (MAX.) 0.12 0.08 0.07
Measurement frequency : 120Hz
Rated voltage (V) 25 50 100
Stability at Low Temperature 2 2 2
Impedance ratio Z– 25°C / Z+20°C
ZT / Z20 (MAX.) Z– 40°C / Z+20°C 4 3 3

The specifications listed at right shall be met Capacitance change Within ±20% of the initial capacitance value
when the capacitors are restored to 20°C after
Endurance tan δ 150% or less than the initial specified value
the rated voltage is applied for 1000 hours at
Leakage Current Less than or equal to the initial specified value
85°C.
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
Shelf Life
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking Printed with gold color letter on black sleeve.

Radial Lead Type Type numbering system (Example : 25V 100µF)

Sleeve (P.E.T.) φ 0.8 tinned copper wire

1 2 3 4 5 6 7 8 9 10 11
UK Z 1 E 1 0 1 M PM
φD+0.5MAX.

Configuration
P ± 0.5

Capacitance tolerance
φD Code
(±20%)
8 · 10 PM
Rated capacitance (100µF) 12.5 to 18 HM
Pressure
relief vent Rated voltage (25V)
L+ MAX. 15MIN 4MIN
Series name
(mm) Type
(φ D < 10) 1.0 φD 8 10 12.5 16 18
α
(φ D 10) 1.5 P 3.5 5.0 5.0 7.5 7.5

• Please refer to page 20 about the end seal configulation.

Dimensions φ D × L (mm)
V 25 50 100
Cap.(µF) Code 1E 1H 2A
10 100 8 × 11.5
22 220 8 × 11.5 10 × 16
33 330 8 × 11.5 10 × 12.5 10 × 20
47 470 10 × 12.5 10 × 16 12.5 × 20
1000 101 10 × 16 12.5 × 20 16 × 25
2200 221 12.5 × 20 16 × 25 16 × 35.5
3300 331 12.5 × 25 16 × 31.5 18 × 35.5
4700 471 16 × 25 16 × 35.5
100000 102 16 × 35.5 18 × 40

Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
CAT.8100Z