Contact

Alipur Road,Barshi
Suyash Ghadage
7507046344 (Mobile) Digital & Mixed-Signal Design | ASIC Design & Verification | Low-
suyash.ghadage22@pccoepune. Power & Timing Optimization | Embedded Systems Integration |
org Silver Medalist PCCOE | Strong Technical Expertise Across Core
Electronics | AIDriven Hardware
www.linkedin.com/in/suyash-
ghadage77 (LinkedIn) Barshi, Maharashtra, India
suyash-
ghadage-32b4bpt.gamma.site/
(Personal)
Summary
github.com/suyash77-MS I’m an Electronics & Telecommunication professional passionate
(Portfolio)
about bridging VLSI design, Embedded Systems, and IoT to create
robust, high-performance, and fabrication-ready solutions. My work
Top Skills
spans from RTL design and functional verification to FPGA/ASIC
VHDL
prototyping and PCB hardware integration, all backed by hands-on
Problem Solving
expertise with industry and open-source toolchains.
Digital IC Design

Currently, I’m working on an ASIC-Based Smart Digital Lock—a

Certifications
complete silicon-to-system project designed using the open-source
Python Using AI
RTL-to-GDSII flow (Yosys, OpenROAD, Magic, KLayout, Netgen)
Verilog HDL: VLSI Hardware Design
Masterclass and SkyWater SKY130 PDK, paired with a custom PCB for FPGA/
PCB Design (OrCAD/Allegro) CPLD prototyping. The design goes beyond standard keypad locks
Internet of Things by exploring alternative authentication methods such as RFID, IoT-
based control, and biometrics.
Honors-Awards
Silver Medalist – Academic I recently completed an Embedded Systems & IoT internship at
Excellence Pantech, where I worked on ARM-based development, sensor
integration, and communication protocols for real-time applications.
I’ve also invested in advanced skill-building through VSD’s CMOS
Circuit Design & SPICE Simulation course, deepening my expertise
in device-level modeling, timing analysis, and standard cell design.

Technical Skills:
• VLSI & ASIC Design: Verilog, SystemVerilog, RTL coding, FSM
design, logic synthesis, timing analysis, physical design, DRC/LVS.
• EDA Tools: Yosys, OpenROAD, Magic VLSI, KLayout, OpenSTA,
Vivado, ModelSim, STM32CubeIDE, Cadence.
• Embedded & IoT: Embedded C, Python, UART, SPI, I2C, CAN,
MQTT, Bluetooth, PCB design with KiCAD.
• Prototyping Platforms: FPGA (Xilinx/Altera), CPLD, ARM
microcontrollers.

Page 1 of 4
Highlights:

Achieved 100% functional coverage in UART verification with zero

assertion failures.

Designed synchronous FIFO and verified timing/functional

correctness on FPGA.

Built RFID-enabled IoT billing system reducing processing time by

70%.

Silver Medalist, ENTC Department; ranked 1st in class for six

consecutive semesters.

Completed 1,600+ hours of GATE ECE preparation in core

electronics domains.

I believe in combining technical excellence with clear communication

to lead teams, mentor peers, and push the boundaries of hardware
innovation. I’m particularly driven by the potential of open-source
silicon, Industry 4.0 systems, and AI-assisted hardware design to
redefine what’s possible.

Open to consulting, senior technical roles, and collaborations that

challenge the status quo in VLSI, Embedded Security, and IoT
hardware innovation.

Experience
Pantech ProEd Pvt Ltd
Embedded System Design & PCB Development Intern
July 2025 - Present (2 months)
Intern – IoT, Embedded Systems & PCB Design
Pantech Solutions (Online Internship) | june 2025 – aug 2025 (70 Days)

Gained hands-on experience in microcontroller programming using Arduino,

ESP32, and 8051, developing real-time embedded applications.

Page 2 of 4
Worked with communication protocols like UART, I2C, and SPI, integrating
various sensors (temperature, humidity, gas, motion, etc.) and actuators
(servo, motor, stepper).

Designed and simulated custom PCBs using EasyEDA, Proteus, Orcad, and
Eagle, including schematic capture, layout, routing, and Gerber generation.

Developed IoT-based automation projects using Wi-Fi, Bluetooth, and RFID

integrated with ThingSpeak, Azure, and AWS IoT, and visualized data using
Power BI, IFTTT, and MATLAB.

Built smart systems such as home automation, predictive maintenance, and

brain-controlled robots using cloud APIs and edge-device control.

Skills Applied in Real-Life Use Cases:

Smart Home Systems: Automating appliances using Google Assistant + IFTTT

integration with ESP32.

Cloud-Based Monitoring: Real-time health, environment, and equipment status

via dashboards and alerts.

PCB Design Workflow: Creating production-ready PCBs for hardware startups

or prototyping.

IoT Analytics: Applying sensor data for preventive maintenance in industries or

agriculture.

Edge + Cloud Integration: Building scalable, secure systems where embedded

hardware communicates with the cloud using MQTT/HTTP protocols.

Qloud Solutions Pvt. Ltd.

Generative AI Intern
May 2025 - Present (4 months)
Pune, Maharashtra, India

During my internship at Qloud Solutions, I worked on developing a Generative

AI-powered chatbot using the OpenAI GPT-4 API and LangChain framework.
My primary responsibilities included designing effective and structured
prompts, integrating AI capabilities through Python-based API calls, and
building a user-friendly web interface for seamless interaction. This solution

Page 3 of 4
was implemented to automate customer support workflows, resulting in a
70% reduction in manual query handling and significantly improving response
efficiency and user satisfaction.

Education
Pimpri Chinchwad Education Trust'S. Pimpri Chinchwad College Of
Engineering
Bachelor of Technology - BTech, Electronics and telecommunication
enginerering · (2022 - July 2026)

Page 4 of 4