IE 2 / IE 3

GMT Series
Energy-efficient
Cast Iron Three Phase
Induction Motors

60 Hz.
Contents

SPECIFICATIONS Page 3
APPLICATIONS Page 4
FEATURES AND BENEFITS Page 4
BENEFITS OF ENERGY EFFICIENT MOTORS Page 4
STANDARDS FOR MOTORS Page 5
INTERNATIONAL STANDARDS FOR MOTOR EFFICIENCY Page 6
NOMINAL EFFICIENCY OF MOTORS & EFFICIENCY CLASS COMPARISON Page 7
TOLERANCES Page 8
TYPE KEY Page 9
MATERIAL OF CONSTRUCTION Page 9
MOUNTING ARRANGEMENTS Page 10
DEGREE OF PROTECTION (INGRESS PROTECTION - IP) Page 11
INSULATION CLASS Page 12
EFFECTS OF VARIATION OF VOLTAGE AND FREQUENCY Page 12
OVERLOAD Page 12
INSTALLATION CONDITIONS Page 13
INSTALLATION AT ALTITUDES OF MORE THAN 1000 M ABOVE SEA LEVEL Page 13
NUMBERS OF STARTS/HOUR Page 13
BEARING DETAILS & LUBRICATION Page 14
TERMINAL BOX Page 14
CABLE SIZE Page 14
NOISE LEVEL Page 15
VIBRATION LEVEL Page 15
EXPLODED VIEW AND SPARE PARTS DESCRIPTION Page 16
MOTOR PERFORMANCE DATA Page 17
MOTOR DIMENSIONAL DRAWING Page 23
SHIPPING DIMENSIONS Page 26

Tel. : +34 96 1665200

2 e-mail: info@pumpsgp.com
Product Data

SPECIFICATIONS

” Motor type : AC three-phase squirrel cage induction motor

” Enclosure : TEFC

” Frame : 63 to 355L

” Mounting : Foot, Flange and Face

” Rated power : 0.37 kW to 315 kW (0.5 to 430 HP)

” Voltage ± variation : 230/380/460 V ± 10%

” Frequency ± variation : 60 Hz ± 5%

” Combined variation : 10% (Absolute sum)

” Rated speed : 3600, 1800, 1200 rpm (2 pole, 4 pole, 6 pole)

” Ambient temperature : +50°C

” Altitude : Should be lower than 1000 metres above sea level

” Relative humidity : Up to 100%

” Connection : Up to 2.2 kW-Star connection with 3 leads & above 2.2 kW-Delta connection with 6 leads

” Direction of rotation : Anticlockwise or clockwise as seen from the Driver end side

” Duty / Rating : S1 / Continuous

” Insulation class : Class 'F' and temperature rise limited to class 'B'

” Degree of protection : IP 55

” Cooling method : IC411 / Shaft mounted fan.

Tel. : +34 96 1665200

3 e-mail: info@pumpsgp.com
Product Data

APPLICATIONS
” Pumps

” Compressors

” Fans and blowers

” Flour mills, rolling mills, mixers

” Machine tools

” Textile and plastic machineries

” Printing, packaging and wood working machineries

” Agricultural, food processing machinery

” Material handling equipments

” Cranes, hoists and lifts

” Cooling towers.

FEATURES AND BENEFITS

” Motors are fitted with dynamically balanced aluminium die cast squirrel cage rotors.

” Motors are fitted with pre-lubricated antifriction ball bearings up to 132 frame.

” Motors are free from moisture and dust particles.

” Minimum electricity consumption because of special grade electrical steel used in an energy efficient optimized design.
” Balanced three-dimensional heat transfer principal due to special fins design of stator body.

” Minimum rotor losses due to use of electrolytic grade of aluminium.

” Minimum copper losses due to use of electrolytic grade of copper.

” Minimum friction losses.

” Low noise, smooth running motor.

” Reliable operation.

” Easy maintenance.

” Low payback period.

BENEFITS OF ENERGY EFFICIENT MOTORS

” Short payback period / lower operating cost due to their higher efficiency.

” Motors have lower power dissipation due to their higher efficiency.

” Motors have a longer life span due to their relatively low temperature rise.

” Motors have higher thermal margins, which helps avoid unnecessary safety margins in the design process.

” Motors save energy and reduce CO2 emissions.

Tel. : +34 96 1665200

4 e-mail: info@pumpsgp.com
 Product Data

STANDARDS FOR MOTORS

All motors are complying with following International standards:

International Standards
IEC 60034-1 Rating and performance

IEC 60034-2-1 Methods for determining losses and efficiency

IEC 60034-5 Classification of degrees of protection

IEC 60034-6 Methods of cooling

IEC 60034-7 Symbols of construction and mounting arrangements

IEC 60034-8 Terminal markings and direction of rotation

IEC 60034-9 Noise limits

IEC 60072-1 Dimensions and output of electric machines

IEC 60034-14 Vibration limits

IEC 60034-30-1 Efficiency classes of line operated AC motors (IE code)

Tel. : +34 96 1665200

5 e-mail: info@pumpsgp.com
Product Data

INTERNATIONAL STANDARDS FOR MOTOR EFFICIENCY

The efficiency factor defines the efficiency of motors when transforming electrical energy into mechanical energy.

The International Electrotechnical Commission (IEC), in order to harmonize the energy consumption regulations
aimed to reduce the CO2 emissions and the impact of industrial operations on the environment, has established
the standard IEC 60034-30:2008 which defines energy efficiency classes for low-voltage, three-phase, 50Hz
and 60Hz squirrel cage induction motors.

In parallel IEC developed and issued a new standard for determining the motor efficiencies. The new standard
IEC 60034-30 defines and harmonizes worldwide the efficiency classes IE1, IE2 and IE3 for low-voltage
three-phase motors in the power range from 0.75 kW to 375 kW.

New international efficiency classes of low-voltage three-phase motors - IE = International Efficiency

The new IEC 60034-30:2008 defines worldwide the following efficiency classes of LV three-phase motors, in the
range from 0.75 to 375 kW.

High EFFICIENCY CLASS COMPARISON

IE1 = Standard Efficiency efficiency

IE3
Premium efficiency
NEMA Premium
EISA 2007 (IE3)
from 11/2010

IE2 = High Efficiency IE2

High efficiency
EPAct (IE2)
to 11/2010

IE1
Standard efficiency
IE3 = Premium Efficiency Low
(new efficiency class in Europe nowadays and identical efficiency IEC motors NEMA motors
to "NEMA Premium" in the USA for 60Hz).

From now motors can be offered and sold with the new classes IE1, IE2 and IE3.
In that case the efficiency has to be determined according to the new requirements given in the IEC 60034-2-1
standard.

According to the Commission Regulation (EC) No 640/2009 (introduced in July 2009) the required efficiency class
of general-purpose motors (introduced to the market in Europe in future) will be as follows:

p From 16 June 2011, motors placed for the first-time on the market shall have a
minimum efficiency class of IE2.

p From 1 January 2015: motors with a rated output between 7.5 - 375 kW shall have a
minimum efficiency class of IE3, or IE2 if they are operated/equipped with electronic
speed control (VSD).

p From 1 January 2017: motors with a rated output between 0.75 - 375 kW shall have a
minimum efficiency class of IE3, or IE2 if they are operated/equipped with electronic
speed control (VSD).

Electronic speed control is carried out using a frequency converter (VSD) that adjusts the speed of the motor -
and therefore the torque produced - based on the energy needed.

General Pumps has offered energy efficiency motors for several years now.
These motors are also in compliance with the efficiency standards covered by CEMEP.
We continuously carry out intensive research and development of the motors according
to the new standards IEC 60034-30 and IEC 60034-2-1.

Tel. : +34 96 1665200

6 e-mail: info@pumpsgp.com
 Product Data

NOMINAL EFFICIENCY OF MOTORS & EFFICIENCY CLASS COMPARISON

Nominal efficiency (%) limits for class IE2 / IE3 60 Hz according to the IEC 60034-30
PN 2-Pole Eff. (%) 4-Pole Eff. (%) 6-Pole Eff. (%)
kW HP IE2 IE3 IE2 IE3 IE2 IE3
0.18 0.25 64.0 65.6 68.0 69.5 55.0 67.5
0.37 0.5 72.0 73.4 72.0 78.2 64.0 75.3
0.55 0.75 74.0 76.8 75.5 81.1 68.0 81.7
0.75 1 75.5 77.0 78.0 83.5 73.0 82.5
1.1 1.5 82.5 84.0 84.0 86.5 85.5 87.5
1.5 2 84.0 85.5 84.0 86.5 86.5 88.5
2.2 3 85.5 86.5 87.5 89.5 87.5 89.5
3.7 5 87.5 88.5 87.5 89.5 87.5 89.5
5.5 7.5 88.5 89.5 89.5 91.7 89.5 91.0
7.5 10 89.5 90.2 89.5 91.7 89.5 91.0
11 15 90.2 91.0 91.0 92.4 90.2 91.7
15 20 90.2 91.0 91.0 93.0 90.2 91.7
18.5 25 91.0 91.7 92.4 93.6 91.7 93.0
22 30 91.0 91.7 92.4 93.6 91.7 93.0
30 40 91.7 92.4 93.0 94.1 93.0 94.1
37 50 92.4 93.0 93.0 94.5 93.0 94.1
45 60 93.0 93.6 93.6 95.0 93.6 94.5
55 75 93.0 93.6 94.1 95.4 93.6 94.5
75 100 93.6 94.1 94.5 95.4 94.1 95.0
90 125 94.5 95.0 94.5 95.4 94.1 95.0
110 150 94.5 95.0 95.0 95.8 950 95.8
150 200 95.0 95.4 95.0 96.2 95.0 95.8
185 250 95.4 95.8 95.0 96.2 95.0 95.8
220 to 335 300 to 450 95.4 95.8 95.4 96.2 95.0 95.8
375 to 1000 500 to 1350 95.4 95.8 95.8 96.2 95.0 95.8
100
2-Pole, 60 Hz
95 Efficiency classes
Efficiency %

90

85 IE3
80 IE2

75
Not IE classified
70
1 2 3 5 10 20 30 50 100 200 300 500
PN kW
100
4-Pole, 60 Hz
95 Efficiency classes
Efficiency %

90

85 IE3
IE2
80

75
Not IE classified
70
1 2 3 5 10 20 30 50 100 200 300 500
PN kW
100
6-Pole, 60 Hz
95 Efficiency classes
Efficiency %

90

85
IE3
80 IE2
75
Not IE classified
70
1 2 3 5 10 20 30 50 100 200 300 500
PN kW

Tel. : +34 96 1665200

7 e-mail: info@pumpsgp.com
Product Data

TOLERANCES
For industrial motors according to IEC 60034-1, certain tolerances must be
allowed on guaranteed values, taking into consideration the necessary tolerances for the
manufacture of such motors and the materials used. The standard includes the following
remarks:

” It is not intended that guarantees necessarily have to be given for all or any of the items involved. Quotations
including guaranteed values subject to tolerances should say so, and the tolerances should be in accordance
with the table.

” Attention is drawn to the different interpretation of the term guarantee. In some countries a distinction is made
between guaranteed values and typical or declared values.

” Where a tolerance is stated is only one direction, the value is not limited in the other direction.

Permissible deviation between real values & declared values according to the IEC 60034-1

Power factor (cos φ) -1/6(1-cos φ)

Minimum 0.02 and maximum 0.07
-0.15(1-h) for PN £ 150 kW
Efficiency (h) -0.1(1-h) for PN > 150 kW
Where h is a decimal number
±20% of the slip for PN ³ 1 kW
Slip (s)
±30% of the slip for PN < 1 kW

Locked rotor current (IL/IN) +20% (No lower limit)

-15% and +25%

Locked rotor torque (TL/TN)
(+25% may be exceeded by agreement)

Breakdown torque (TB/TN) -10%

Moment of inertia (J) [kgm²] ±10%

Tel. : +34 96 1665200

8 e-mail: info@pumpsgp.com
 Product Data

TYPE KEY

GMT 050 1 112 M A 2

Type range Motor output (HP) Number of poles Shaft centre height Mounting arrangements
GMT = General Pumps 025 = 0.25 hp 1 = 2 Pole 60 Hz. 063 = 63 mm A = Mounting code IM B3
Three-phase 050 = 0.50 hp 3 = 4 Pole 60 Hz. 071 = 71 mm B = Mounting code IM B34
induction motor 075 = 0.75 hp 5 = 6 Pole 60 Hz. 080 = 80 mm C = Mounting code IM B5
series 110 = 1.00 hp 090 = 90 mm D = Mounting code IM B6
115 = 1.50 hp 100 = 100 mm E = Mounting code IM B7
120 = 2.00 hp 112 = 112 mm F = Mounting code IM B8
130 = 3.00 hp 132 = 132 mm G = Mounting code IM B14
150 = 5.00 hp 160 = 160 mm H = Mounting code IM B35
175 = 7.50 hp 180 = 180 mm I = Mounting code IM V1
210 = 10.0 hp 200 = 200 mm J = Mounting code IM V3
212 = 12.5 hp 225 = 225 mm K = Mounting code IM V5
215 = 15.0 hp 250 = 250 mm L = Mounting code IM V6
220 = 20.0 hp 280 = 280 mm M = Mounting code IM V15
225 = 25.0 hp 315 = 315 mm N = Mounting code IM V18
230 = 30.0 hp 355 = 355 mm O = Mounting code IM V19
240 = 40.0 hp P = Mounting code IM V37
250 = 50.0 hp
Frame length
260 = 60.0 hp
Z =
275 = 75.0 hp
S = Mechanical dimensions (short)
310 = 100 hp
M = Mechanical dimensions (medium)
312 = 120 hp
L = Mechanical dimensions (long)
315 = 150 hp
Efficiency class
318 = 180 hp
2 = IE2 class motor
321 = 215 hp
3 = IE3 motor
327 = 270 hp
334 = 340 hp
343 = 430 hp

MATERIAL OF CONSTRUCTION

Component Material
Stator frame Cast iron
Front endshield Cast iron
Rear endshield Cast iron
Terminal box Aluminum alloy / Cast iron
Terminal plate Bakelite
Fan cover Carbon steel
Fan Reinforced polypropylene / Nylon
Electric rotor Silicon steel / Carbon steel
Key Carbon steel
Hardware Carbon steel

Tel. : +34 96 1665200

9 e-mail: info@pumpsgp.com
Product Data

MOUNTING ARRANGEMENTS
Mounting arrangements for rotating electrical machines are designated according to the
IEC 60034-7 standard. Our motors are available with the mounting arrangements as per
details below, depending on design and frame size.

Horizontal shaft mounting Vertical shaft mounting

Mounting arrangement Code I Code II Frame size Mounting arrangement Code I Code II Frame size

Mounted Mounted by
by foot, IM B3 IM 1001 63 - 355 foot, Driver IM V5 IM 1011 63 - 160
foot down end down

Mounted
by foot, Mounted by
foot left IM B6 IM 1051 63 - 160 foot, Driver IM V6 IM 1031 63 - 160
(viewed from end up
Driver-end)

Mounted Mounted on
by foot, Driver end
foot right side of flange
IM B7 IM 1061 63 - 160 IM V1 IM 3011 63 - 355
(viewed from type 'B',
Driver-end) Driver end
down
Mounted on
Mounted Driver end
by foot, side of flange
IM B8 IM 1071 63 - 160 IM V3 IM 3031 63 - 160
foot up type 'B',
Driver end
up
Mounted by Mounted on
foot, foot down, Driver end
with additional side of flange
mounting on IM B34 IM 2101 63 - 132 type 'C', IM V18 IM 3611 63 - 132
D-end side of Driver end
flange type 'C' down
Mounted by Mounted on
foot, foot down, Driver end
with additional side of flange
mounting on IM B35 IM 2001 63 - 355 type 'C', IM V19 IM 3631 63 - 132
D-end side of Driver end
flange type 'B' up
Mounted by
Mounted on foot, with
Driver end additional
side of flange IM B5 IM 3001 63 - 355 mounting on IM V15 IM 2011 63 - 160
D-end side of
type 'B' flange, type 'B'
D-end down
Mounted by
Mounted on foot, with
Driver end additional
mounting on IM V37 IM 2131 63 - 132
side of flange IM B14 IM 3601 63 - 160 D-end side of
type 'C' flange, type 'C'
D-end up

Tel. : +34 96 1665200

10 e-mail: info@pumpsgp.com
Product Data

DEGREE OF PROTECTION (INGRESS PROTECTION - IP)

As per IEC 60034-5 standard, the Degree of protection of a rotating electrical
machine is designated with the letters IP (Ingress Protection) followed by two
characteristic numbers, with the following manner:

” First characteristic numeral: Describes to protection against access to hazardous parts and ingress of solids &
foreign bodies.

” Second characteristic numeral: Describes to protection against ingress of water.

” All our motors shown in this catalog are IP 55.

Second numeral & description

0 1 2 3 4 5 6 7 8
Protection
Protection Protection Protection Protection Protection Protection against
Protection
against against against against against low against long period
Not against
vertically direct spray direct spray water pressure jet strong jet of
protected immersion
falling of water up of water up splashed of water of water immersion
between
drops to 15° from to 60° from from all from any from any under
0.15 & 1 m
of water vertical vertical directions directions directions pressure
15° 60°

First numeral &

0.15
description &
1m

0 Not protected

Protection against
solid foreign
1 bodies > 50 mm
(e.g: Inadvertent
contact with hand)

Protection against
solid foreign
bodies > 12 mm
2 (e.g: Inadvertent IP 21 IP 22 IP 23
contact with the
fingers)

Protection against
solid foreign
bodies > 2.5 mm
3 (e.g: Inadvertent
contact with wires
and tools)

Protection against
solid foreign
bodies > 1 mm
4 (e.g: Inadvertent IP 44
contact with wires,
bands)

Protection against
5 dust (no harmful IP 54 IP 55 IP 56
deposits of dust)

Totally protected
6 against deposition
of dust

Tel. : +34 96 1665200

11 e-mail: info@pumpsgp.com
Product Data

INSULATION CLASS
Motors are manufactured with class 'F' insulation as a standard and temperature rise limited to class 'B'. This allows for about 25°C reserve
thermal capacity in the motor. The reserve thermal capacity is what helps maintain the integrity of the insulation and lengthen motor life.

Temperature rise and maximum temperatures at the hottest points of the winding according to the temperature classes of IEC 60034-1.

Maximum winding temperature = 105°C

Ambient temperature
A
50° 50° 5° Maximum temperature rise
Maximum winding temperature = 120°C
Temperature margin
E
Insulation class

50° 65° 5°
Ins. class Maximum winding temperature
Maximum winding temperature = 130°C
A 105°C
B E 120°C
50° 70° 10° B 130°C
Maximum winding temperature = 155°C F 155°C
H 180°C
F
50° 95° 10° Insulation class 'F' in an electric motor
Maximum winding temperature = 180°C means that at ambient temperature of
50°C, the temperature rise of the winding
H may be max. 95°C with the additional
temperature margin of 10°C (under
50° 115° 15° specified measuring conditions in
accordance with the IEC 60034-1
Temperature °C standard).

EFFECTS OF VARIATION OF VOLTAGE AND FREQUENCY

Effects of variation of voltage and frequency on the characteristics of motor

Voltage Frequency
Characteristics
110% 90% 105% 95%
Torque
Starting and maximum Increase 21% Decrease 19% Decrease 10% Increase 11%
Speed
Synchronous No change No change Increase 5% Decrease 5%
Full load Increase 1% Decrease 1.5% Increase 5% Decrease 5%
Current
No load Increase 10-15% Decrease 10-12% Decrease 5-6% Increase 5-6%
Starting Increase 10-12% Decrease 10-12% Decrease 5-6% Increase 5-6%
Full load Decrease 7% Increase 11% Slight Decrease Slight Increase
Temperature rise Decrease 3-4% Increase 6-7% Slight Decrease Slight Increase
Overload capacity Increase 21% Decrease 19% Slight Decrease Slight Increase
Magnetic noise Slight Increase Slight Decrease Slight Decrease Slight Increase
Efficiency
Full load Increase 0.5-1.0% Decrease 2% Slight Increase Slight Decrease
Power factor Decrease 3% Increase 1% Slight Increase Slight Decrease

OVERLOAD
At operating temperature three-phase motors are capable of withstanding an overload for 15 second at 1.6 times
the rated torque at rated voltage. This overload is according to the IEC 60034-1 standard and will not result in
excessive heating.

Tel. : +34 96 1665200

12 e-mail: info@pumpsgp.com
Product Data

INSTALLATION CONDITIONS
The motors conform to degree of protection IP 55 as per IEC 60034-5.

The standard design for horizontal mounting is suitable for indoor and protected outdoor
installation (temperature of coolant -20°C to +50°C).

For unprotected outdoor installation or severe climatic conditions (moisture category wet,
climate group WORLDWIDE, extremely dusty site conditions, aggressive industrial atmosphere,
danger of storm rain and coastal climate, danger of attack by termites, etc.), as well as vertical
mounting, special protective measures are recommended, such as:
” Protective cowl (for vertical shaft-down motors)

” For vertical shaft-up motors additional bearing seal and flange drainage

” Special paint finish

” Treatment of winding with protective moisture-proof varnish

” Anti-condensation heating (possibly winding heating)

” Condensation drain holes.

The special measures to be applied have to be agreed with the factory once the conditions of installation have been
settled.

The corresponding conditions of installation have to be clearly indicated in the order.

INSTALLATION AT ALTITUDES OF MORE THAN 1000 M ABOVE SEA LEVEL

Altitude of installation
Conditions
2000 m 3000 m 4000 m
At 50°C ambient temperature and thermal class 'B', Rated output reduce to approx 92% 84% 76%

At 50°C ambient temperature and thermal class 'F', Rated output reduce to approx 89% 79% 68%

Full nominal output to data tables with thermal class 'B' and ambient temperature of 32°C 24°C 16°C

Full nominal output to data tables with thermal class 'F' and ambient temperature of 30°C 19°C 9°C

NUMBERS OF STARTS/HOUR
The permissible nos. of starts per hour can be taken as given in the table below, provided the following conditions are met:

Additional moment of inertia £ moment of inertia of the rotor: load torque rising with the square of the speed up to
nominal torque; starts at even intervals.

Frame size 2 Pole 4 Pole 6 & 8 Pole

63 -71 100 250 350
80 - 100 60 140 160
112 - 132 30 60 80
160 - 180 15 30 50
200 - 225 8 15 30
250 - 355 4 8 12

Tel. : +34 96 1665200

13 e-mail: info@pumpsgp.com
Product Data

BEARING DETAILS & LUBRICATION

Regreasing interval
Frame size Nos. of poles Drive end bearing Non-Drive end bearing
[hours]
2 -
63 6201 ZZ-C3 6201 ZZ-C3
4, 6, 8 -
2 -
71 6202 ZZ-C3 6202 ZZ-C3
4, 6, 8 -
2 -
80 6204 ZZ-C3 6204 ZZ-C3
4, 6, 8 -
2 -
90 6205 ZZ-C3 6205 ZZ-C3
4, 6, 8 -
2 -
100 6206 ZZ-C3 6206 ZZ-C3
4, 6, 8 -
2 -
112 6206 ZZ-C3 6206 ZZ-C3
4, 6, 8 -
2, 4 6208 ZZ-C3 6208 ZZ-C3 -
132
6, 8 6308-C3 6308-C3 8000
2, 4, 8 6309-C3 6209-C3 4000
160
6 6310-C3 6309-C3 8000
2 3500
180 6310-C3 6210-C3
4, 6, 8 8000
2 3500
200 6312-C3 6212-C3
4, 6, 8 8000
2 3500
225 6313-C3 6313-C3
4, 6, 8 8000
2 3000
250 6315-C3 6215-C3
4, 6, 8 7000
2 6317-C3 6316-C3 3000
280
4, 6, 8 6317-C3 6316-C3 5000
2 6317-C3 6317-C3 2000
315
4, 6, 8 6319-C3 6319-C3 4000
2 6319-C3 6319-C3 2000
355
4, 6, 8 6322-C3 6319-C3 3000

TERMINAL BOX
Terminal box is provided on top as a standard.

CABLE SIZE

Maximum cable size Cable entry size

Frame size
DOL starting Star-Delta starting IE2 / IE3
63 3C x 2.5 mm² - 1 x 3/4"
71 3C x 2.5 mm² - 1 x 3/4"
80 3C x 4 mm² - 1 x 3/4"
90 3C x 4 mm² - 2 x 3/4"
100 3C x 10 mm² 2 x 3C x 10 mm² 2 x 3/4"
112 3C x 10 mm² 2 x 3C x 10 mm² 2 x 3/4"
132 3C x 10 mm² 2 x 3C x 10 mm² 2 x 1"
160 3C x 35 mm² 2 x 3C x 25 mm² 2 x 1"
180 3C x 35 mm² 2 x 3C x 25 mm² 2 x M40 x 1.5
200 3C x 120 mm² 2 x 3C x 70 mm² 2 x M50 x 1.5
225 3C x 120 mm² 2 x 3C x 70 mm² 2 x M50 x 1.5
250 3C x 120 mm² 2 x 3C x 70 mm² 2 x M63 x 1.5
280 3C x 240 mm² 2 x 3C x 150 mm² 2 x M63 x 1.5
315 3C x 240 mm² 2 x 3C x 150 mm² 2 x M63 x 1.5
355 3C x 400 mm² 2 x 3C x 300 mm² 2 x M63 x 1.5

Tel. : +34 96 1665200

14 e-mail: info@pumpsgp.com
Product Data

NOISE LEVEL
As per IEC 60034-9 standard the permitted noise levels of electric machines are mention
as per details below.

IE2 & IE3 NOISE LEVEL

2-Pole 4-Pole 6-Pole
PN (3600 r/min) (1800 r/min) (1200 r/min)
Measuring Sound Measuring Sound Measuring Sound
surface pressure surface pressure surface pressure
sound level sound level sound level
kW HP at 60 Hz at 60 Hz at 60 Hz at 60 Hz at 60 Hz at 60 Hz
Lpfa LWA Lpfa LWA Lpfa LWA
dB(A) dB(A) dB(A) dB(A) dB(A) dB(A)
0.75 1 56 67 46 57 45 57
1.1 1.5 57 68 48 60 45 57
1.5 2 61 73 48 60 49 61
2.2 3 61 73 52 64 53 65
3 4 63 75 52 64 53 65
3.7 5 65 75 53 65 55 67
5.5 7.5 68 80 59 71 55 67
7.5 10 68 80 59 71 57 69
11 15 72 84 62 72 57 69
15 20 73 86 62 73 58 70
18.5 25 73 86 64 76 58 70
22 30 74 87 64 76 61 73
30 40 77 91 64 76 62 74
37 50 77 91 64 76 62 74
45 60 77 91 65 78 63 75
55 75 80 94 66 79 64 76
75 100 80 94 69 82 68 80
90 120 80 94 69 82 68 80
110 150 81 95 77 90 73 83
132 180 81 95 77 90 73 83
160 215 85 99 82 95 78 90
200 270 85 99 82 95 78 90
250 340 88 102 84 97 78 90
315 430 88 102 84 97 - -

VIBRATION LEVEL
The amplitude of vibration in electric motors are governed by IEC 60034-14, Mechanical
vibration of rotating electrical machines with frame size 56 & large - methods of
measurement and limits.
” Rotors are dynamically balanced with half key and the standard version meets the vibration levels of Grade A
(without special vibration requirements) described in IEC 60034-14. As an option, motors can be supplied in
conformance with vibration of Grade B.

” The RMS speed and vibration levels in mm/s of Grade A and B are shown in below table.

Vibration speed RMS (mm/s)

Vibration Assembly Shaft height Shaft height Shaft height
63 £ H £ 132 132 < H £ 280 H > 280
Grade A Free suspension 1.6 2.2 2.8
Grade B Free suspension 0.7 1.1 1.8

If the machine vibrates even after proper alignment on an amply size foundation, this could be cause by incorrect
balanced pulley, coupling or similar, fitted to the shaft. Other causes could be weak foundation.

Tel. : +34 96 1665200

15 e-mail: info@pumpsgp.com
 Product Data

EXPLODED VIEW AND SPARE PARTS DESCRIPTION

21
22
20
19 27

18 26

17 23

15
12 14
10
9 29
3 7 28
25
24

11 13 14

4 8
5
2 16
6

Pos. Parts name Pos. Parts name

1 B5 flange 16 B4/B14 stator frame
2 B14 flange 17 Gasket
3 Front end shield 18 Terminal plate
4 V-seal 19 Terminal box base
5 Hex bolt 20 Gasket
6 Spring washer 21 Screw
7 Front bearing cover 22 Terminal box cover
8 Spring washer 23 Lifting bolt
9 Hex bolt 24 Rear bearing cover
10 Key 25 Rear end shield
11 Ball bearing (Drive end) 26 Grease nipple
12 Electric rotor 27 V-seal
13 Ball bearing (Non-drive end) 28 Fan
14 Stator stack 29 Fan cover
15 B3 stator frame

Tel. : +34 96 1665200

16 e-mail: info@pumpsgp.com
 Product Data

MOTOR PERFORMANCE DATA - 3600 RPM, 230/380/460V (2 POLE)

IE 2 HIGH EFFICIENCY
Rated current DOL starting Break
Rated Rated down Moment
output Efficiency Power [A] Locked rotor Locked rotor Torque / of inertia Gross
Frame speed factor weight
PN h current / Torque /
size n Rated J
[%] [cos φ] [kg]
[min¯¹] 230V 380V 460V Rated current Rated Torque Torque [kgm²]
kW HP IL/IN TL/TN TB/TN
0.19 0.25 63 3310 68 0.7 0.950 0.503 0.475 5 3 3.1 0.00012 3.8

0.37 0.5 71 3420 73 0.77 1.65 0.928 0.826 6.8 2.7 2.7 0.00033 10

0.56 0.75 71 3420 76 0.8 2.28 1.31 1.14 6.8 2.7 2.7 0.00045 10.3

0.75 1 80 3400 79 0.84 2.84 1.68 1.42 6 2.9 3.1 0.00079 9

1.1 1.5 80 3410 82.5 0.81 4.14 2.41 2.07 7.2 3.7 3.7 0.00096 15.2

1.5 2 90S 3480 84 0.83 5.40 3.09 2.70 9.1 3.8 3.7 0.00205 18.5

2.2 3 90L 3490 85.5 0.78 8.28 4.5 4.14 9.9 4.2 4.4 0.00242 20.5

3.0 4 100L 3505 87.5 0.86 10.0 5.89 5.00 9 3.5 4 0.00672 32.1

4.1 5.5 112M 3495 87.5 0.84 13.7 7.73 6.83 9.5 3 4.2 0.00842 41.8

5.6 7.5 132S 3535 88.5 0.87 17.9 10.6 8.97 9.2 3 3.8 0.02430 65.8

7.5 10 132S 3535 89.5 0.85 24.8 14.3 12.4 9.4 3 3.9 0.02430 65.7

11 15 160M 3560 90.2 0.81 37.8 21.3 18.9 10.2 3.4 4.8 0.05295 117

15 20 160M 3550 90.2 0.83 50.2 28.7 25.1 8.9 2.9 4 0.05295 117

19 25 160L 3555 91 0.85 60.0 34.7 30.0 9.9 3.1 4.1 0.06471 139

22 30 180M 3555 91 0.85 71.4 40.1 35.7 9.5 2.8 3.7 0.11919 178

30 40 200L 3575 92.4 0.84 97.0 54 48.5 8.4 3.2 3.5 0.20630 251

37 50 200L 3570 92.4 0.85 118 68.6 59.1 8.5 3.8 3.4 0.22424 259

45 60 225S/M 3565 93 0.9 135 79.5 67.5 8.5 2.9 3.6 0.44846 399

56 75 250S/M 3565 93 0.91 163 95.9 81.6 8.9 2.8 3.6 0.55609 455

75 100 280S/M 3575 93.6 0.87 232 136 116 8.6 2.3 3.4 1.27083 716

93 125 280S/M 3575 94.5 0.88 272 159 136 8.8 2.5 3.5 1.41204 752

112 150 315S/M 3575 94.5 0.88 332 194 166 8.8 2.5 3.4 1.50617 830

131 175 315S/M 3575 95 0.89 392 235 196 8.8 2.5 3.3 1.74151 900

149 200 315S/M 3575 95 0.9 440 264 220 8.6 2.5 3.1 2.11806 990

187 250 315S/M 3575 95.4 0.88 554 325 277 9.4 2.9 3.9 2.11806 990

224 300 355M/L 3585 95.4 0.91 636 377 318 9.2 2.4 3.5 5.17105 1650

261 350 355M/L 3585 95.4 0.91 752 451 376 8.6 2.1 3 5.74561 1700

Tel. : +34 96 1665200

17 e-mail: info@pumpsgp.com
 Product Data

MOTOR PERFORMANCE DATA - 1800 RPM, 230/380/460V (4 POLE)

IE 2 HIGH EFFICIENCY
Rated current DOL starting Break
Rated Rated down Moment
output Efficiency Power [A] Locked rotor Locked rotor Torque / of inertia Gross
Frame speed factor weight
PN h current / Torque /
size n Rated J
[%] [cos φ] [kg]
[min¯¹] 230V 380V 460V Rated current Rated Torque Torque [kgm²]
kW HP IL/IN TL/TN TB/TN
0.18 0.25 63 1710 69 0.64 1.02 0.551 0.512 4.6 2.8 2.9 0.00056 7.6

0.37 0.5 71 1710 73 0.6 2.12 1.13 1.06 5.5 2.8 2.9 0.00079 10.9

0.55 0.75 80 1740 77 0.72 2.50 1.35 1.25 7.5 3.2 3.6 0.00242 9

0.75 1 80 1730 82.5 0.81 2.82 1.65 1.41 7.4 3.1 3.2 0.00380 18.1

1.1 1.5 90S 1745 84 0.76 4.32 2.59 2.16 7.6 2.9 3.5 0.00504 19.7

1.5 2 90L 1755 84 0.75 5.98 3.26 2.99 8.1 3.5 4 0.00672 23.8

2.2 3 100L 1745 87.5 0.71 8.88 5.02 4.44 8 4.9 5.4 0.01225 39.2

3.0 4 100L 1740 87.5 0.73 11.8 6.6 5.89 9.7 4.6 4.9 0.01225 38.8

4.0 5.5 112M 1755 89.5 0.76 14.4 8.4 7.19 7.6 2.3 3.1 0.01875 46.8

5.5 7.5 132M 1770 89.5 0.83 18.6 10.9 9.29 10 2.6 3.5 0.05427 40

5.5 7.5 132S 1770 89.5 0.83 18.6 10.9 9.29 10 2.6 3.5 0.05427 71.7

7.5 10 132M 1765 89.5 0.81 25.4 14.3 12.7 9.5 2.6 3.5 0.06590 76.3

11 15 160M 1765 91 0.76 40.0 21.6 20.0 7 3.2 3.2 0.10037 128

15 20 160L 1765 91 0.77 53.8 29.6 26.9 6.7 3 3 0.11542 131

18.5 25 180M 1770 92.4 0.79 63.6 35.9 31.8 8.5 3.4 3.2 0.19733 178

22 30 180L 1770 92.4 0.81 73.8 41.1 36.9 8.7 3.5 3.2 0.23321 198

30 40 200L 1780 93 0.79 102 57.1 51.2 7.8 2.8 2.8 0.33095 250

37 50 225S/M 1780 93 0.86 116 68 58.1 8.7 2.7 3 0.69987 370

45 60 225S/M 1780 93.6 0.89 136 80.6 67.8 8.3 3 3.2 0.83984 396

55 75 250S/M 1780 94.1 0.88 167 98.3 83.4 8.2 2.9 3.5 1.03930 469

75 100 280S/M 1785 94.5 0.87 228 136 114 8 2.7 2.8 2.16799 699

90 125 280S/M 1785 94.5 0.87 274 161 137 8.6 2.6 2.8 2.81036 796

110 150 280S/M 1785 95 0.87 334 197 167 8.6 2.6 2.7 3.21184 864

130 175 315S/M 1785 95 0.85 410 236 205 8.3 2.6 2.8 3.77391 1006

150 200 315S/M 1785 95 0.85 466 270 233 8.4 2.8 2.9 3.77391 1005

185 250 315S/M 1785 95.4 0.83 588 341 294 8.6 2.7 3 3.77391 993

220 300 355M/L 1790 95.4 0.87 666 390 333 8 2.3 2.6 6.85703 1620

260 350 355M/L 1790 95.4 0.87 786 472 393 7.9 2.4 2.6 8.12016 1643

300 400 355M/L 1790 95.4 0.88 898 544 449 7.5 2.3 2.4 9.92464 1837

Tel. : +34 96 1665200

18 e-mail: info@pumpsgp.com
 Product Data

MOTOR PERFORMANCE DATA - 1200 RPM, 230/380/460V (6 POLE)

IE 2 HIGH EFFICIENCY
Rated current DOL starting Break
Rated Rated down Moment
output Efficiency Power [A] Locked rotor Locked rotor Torque / of inertia Gross
Frame speed factor weight
PN h current / Torque /
size n Rated J
[%] [cos φ] [kg]
[min¯¹] 230V 380V 460V Rated current Rated Torque Torque [kgm²]
kW HP IL/IN TL/TN TB/TN
0.18 0.25 71 1100 61 0.48 1.54 0.787 0.772 3.5 2.8 2.8 0.00079 5.8

0.37 0.5 80 1135 64 0.68 2.14 1.16 1.07 5 2.9 3 0.00242 8.3

0.55 0.75 80 1135 68 0.64 3.18 1.5 1.59 5.2 3.3 3.2 0.00311 16.4

0.75 1 90L 1145 80 0.69 3.42 1.99 1.71 5.4 2.6 2.7 0.00560 24

0.75 1 90S 1145 80 0.69 3.42 1.99 1.71 5.4 2.6 2.7 0.00560 14.6

1.1 1.5 112M 1165 85.5 0.67 4.82 2.85 2.41 8 3.2 4 0.02056 31

1.5 2 112M 1160 86.5 0.71 6.14 3.77 3.07 6.9 2.5 3 0.02617 36

2.2 3 132S 1170 87.5 0.75 8.42 5.01 4.21 7 2.2 2.5 0.04264 45.4

3.0 4 132S 1175 87.5 0.63 13.7 7.36 6.83 8.1 2.7 3.4 0.05815 68.8

4.0 5.5 132M 1170 87.5 0.68 16.9 9.29 8.44 7.7 2.4 3.2 0.05815 71.2

5.5 7.5 160M 1170 89.5 0.81 19.0 11.5 9.52 6.8 2.3 2.9 0.10773 107

7.5 10 160M 1175 89.5 0.74 28.4 15.5 14.2 7 3 3.5 0.14364 119

11 15 160L 1175 90.2 0.71 43.2 22.8 21.6 7.5 3.4 3.8 0.17595 141

15 20 180L 1175 92 0.87 47.0 27.6 23.5 9 2.8 3.8 0.29648 191

18.5 25 200L 1180 91.7 0.8 63.4 35.6 31.7 6.6 2.4 2.4 0.37670 225

22 30 200L 1180 92.4 0.8 74.8 42.8 37.4 7 2.5 2.4 0.44846 250

30 40 225S/M 1185 93 0.8 101 57.7 50.6 8 3.1 3.5 0.98842 363

37 50 250S/M 1185 93 0.82 122 71.2 60.9 8 3.2 3.4 1.31790 446

45 60 280S/M 1190 94.1 0.82 146 86.5 73.2 7.2 2.2 2.6 2.29824 610

55 75 280S/M 1190 94.5 0.82 178 108 89.1 7 2.2 2.6 2.64298 655

75 100 315S/M 1190 95 0.85 234 142 117 6.4 2.1 2.2 3.44737 725

90 125 315S/M 1190 95 0.85 280 172 140 7 2.4 2.4 4.02193 841

110 150 315S/M 1185 95 0.8 364 207 182 7.6 3.1 3 5.28596 980

130 175 315S/M 1185 95 0.83 420 249 210 6.8 2.3 2.6 5.63070 1050

150 200 355M/L 1195 95 0.8 496 290 248 6.7 2.3 2.4 10.00785 1500

185 250 355M/L 1195 95 0.8 612 358 306 7 2.5 2.7 11.67582 1600

220 300 355M/L 1195 95 0.79 736 431 368 7.2 2.5 2.6 13.82036 1795

260 350 355M/L 1195 95 0.8 858 503 429 6.7 2.4 2.4 14.29693 1820

300 400 355M/L 1190 95 0.82 966 580 483 6 2 2 14.77349 1850

335 450 355M/L 1190 95 0.8 1090 645 545 6.2 2.1 2.1 15.48834 1900

Tel. : +34 96 1665200

19 e-mail: info@pumpsgp.com
 Product Data

MOTOR PERFORMANCE DATA - 3600 RPM, 230/380/460V (2 POLE)

IE 3 PREMIUM EFFICIENCY
Rated current DOL starting Break
Rated Rated down Moment
output Efficiency Power [A] Locked rotor Locked rotor Torque / of inertia Gross
Frame speed factor weight
PN h current / Torque /
size n Rated J
[%] [cos φ] [kg]
[min¯¹] 230V 380V 460V Rated current Rated Torque Torque [kgm²]
kW HP IL/IN TL/TN TB/TN
0.19 0.25 63 3415 68 0.74 0.898 0.5 0.449 6.3 4.4 4.4 0.00016 6.7
0.37 0.5 71 3440 73.4 0.82 1.54 0.876 0.772 7 3.1 3.3 0.00040 7.5
0.56 0.75 71 3415 76.8 0.84 2.14 1.22 1.07 7.3 3.7 3.9 0.00047 8.5
0.75 1 80 3470 81.5 0.79 2.92 1.7 1.46 8.6 4.9 4.5 0.00076 13.5
1.1 1.5 80 3450 84 0.81 4.06 2.37 2.03 8.4 5.3 5.2 0.00150 15
1.5 2 90S 3485 85.5 0.82 5.38 3.18 2.69 9.4 4.1 4.4 0.00200 18.5
2.2 3 90L 3480 86.5 0.83 7.70 4.52 3.85 9.1 4.3 4.6 0.00260 23.5
3.0 4 100L 3520 88.5 0.85 10.0 5.95 5.01 10.1 3.8 5 0.00640 32
4.1 5.5 112M 3510 88.5 0.85 13.3 7.83 6.67 8.6 2.8 4.4 0.00800 41
5.6 7.5 112M 3510 89.5 0.85 18.1 10.6 9.07 9.4 3.3 4.9 0.00945 40
5.6 7.5 132S 3545 89.5 0.86 17.9 10.5 8.97 9.6 3.2 4.3 0.02160 65
7.5 10 132S 3535 90.2 0.85 24.6 14.3 12.3 9 3.3 4 0.02520 69
9.3 12.5 132M 3535 91 0.87 29.2 17.1 14.6 9 3.1 3.9 0.03060 78
11 15 132M 3535 91 0.87 34.8 20.4 17.4 9.2 3.2 3.7 0.03060 78
11 15 160M 3550 91.7 0.84 35.8 20.8 17.9 8.7 3.1 4 0.04190 124
15 20 160M 3550 91.7 0.84 48.8 28.2 24.4 8.8 3.2 4.1 0.04721 131
19 25 160L 3550 92.4 0.84 59.8 34.3 29.9 8.9 3.3 4.4 0.05554 147
22 30 180M 3555 92.4 0.86 69.4 40.7 34.7 8.7 2.8 4.1 0.11919 182
30 40 200L 3570 93 0.86 94.2 55.3 47.1 8.7 3.6 3.3 0.18729 243
37 50 200L 3570 93.6 0.83 120 69.8 59.8 8.5 3.4 3.3 0.21190 249
45 60 225S/M 3565 94.1 0.9 133 80.1 66.7 7.8 2.4 3.4 0.44148 429
56 75 250S/M 3570 94.2 0.9 163 97.6 81.4 8.6 2.9 3.7 0.48879 520
75 100 250S/M 3570 94.5 0.91 218 133 109 8.3 2.8 3.5 0.52637 500
75 100 280S/M 3580 94.5 0.9 222 131 111 8.1 2.4 3.5 1.20673 766
93 125 280S/M 3581 95 0.9 264 159 132 8.6 2.6 3.3 1.34081 805
112 150 280S/M 3580 95 0.9 322 192 161 8.2 2.6 3.6 1.55525 819
112 150 315S/M 3585 95 0.89 326 193 163 9.3 2.5 3.7 2.11640 962
131 175 315S/M 3580 95.4 0.9 386 232 193 8.2 2.5 3.4 2.55689 1048
149 200 315S/M 3585 95.4 0.9 438 260 219 8.5 2.6 3 2.76838 1089
164 220 315S/M 3580 95.4 0.9 468 274 234 8.4 2.7 3.5 2.99285 1129
187 250 315S/M 3580 95.8 0.9 538 324 269 8.3 2.9 3.4 3.20097 1197
201 270 315L 3580 95.8 0.9 582 346 291 7.8 3 3.5 3.42429 1305
201 270 355M/L 3585 95.8 0.92 570 345 285 7.8 2.1 3.3 4.30930 1537
224 300 315L 3580 96.2 0.91 630 381 315 7.9 2.7 3.2 3.72206 1370
224 300 355M/L 3585 96.2 0.91 630 377 315 7.8 2.3 3.3 4.61102 1585
254 340 315L 3580 96.2 0.91 716 432 358 7.8 2.8 3.2 4.16870 1434
254 340 355M/L 3585 96.2 0.91 716 424 358 7.9 2.4 3.3 5.03995 1665
261 350 355M/L 3585 96.2 0.91 746 441 373 7.9 2.4 3.3 5.03995 1665
283 380 355M/L 3585 96.2 0.92 794 490 397 7.9 2.3 3 5.57611 1751
321 430 355M/L 3585 95.8 0.92 898 549 449 8.8 2.7 3 6.00505 1838

Tel. : +34 96 1665200

20 e-mail: info@pumpsgp.com
 Product Data

MOTOR PERFORMANCE DATA - 1800 RPM, 230/380/460V (4 POLE)

IE 3 PREMIUM EFFICIENCY
Rated current DOL starting Break
Rated Rated down Moment
output Efficiency Power [A] Locked rotor Locked rotor Torque / Gross
Frame speed of inertia
PN h factor current / Torque / weight
size n Rated J
[%] [cos φ] [kg]
[min¯¹] 230V 380V 460V Rated current Rated Torque Torque [kgm²]
kW HP IL/IN TL/TN TB/TN
0.19 0.25 63 1705 69.5 0.69 0.942 0.522 0.471 5.7 2.8 3.3 0.00061 7.2
0.37 0.5 71 1710 78.2 0.67 1.77 1.01 0.886 5.8 3.4 3.5 0.00082 9.5
0.56 0.75 80 1735 81.1 0.78 2.18 1.25 1.09 7.3 3.2 3.4 0.00255 12.5
0.75 1 90S 1760 84 0.74 3.02 1.75 1.51 8 2.8 3.6 0.00490 18.5
1.1 1.5 90S 1755 86.5 0.78 4.10 2.39 2.05 8.5 2.9 3.5 0.00550 19.5
1.5 2 90L 1755 86.5 0.78 5.58 3.21 2.79 8.3 3 4 0.00660 23
2.2 3 100L 1750 89.5 0.75 8.22 4.88 4.11 9 3.8 3.7 0.00900 33
2.2 3 112M 1760 89.5 0.79 7.82 4.6 3.91 7.7 2.2 3.4 0.01430 41
3.0 4 L100L 1740 89.5 0.78 10.8 6.42 5.39 9.5 4.4 4.1 0.01200 37.5
5.6 7.5 132S 1775 91.7 0.83 18.1 10.6 9.07 10.4 2.6 4.3 0.05284 68.8
7.5 10 132M 1770 91.7 0.83 24.8 14.4 12.4 10.5 2.7 4.3 0.06420 80.7
9.3 12.5 160M 1775 92.4 0.82 30.4 18 15.2 8.3 3 3.7 0.08030 109
11 15 160L 1775 92.4 0.82 36.4 21.1 18.2 8.3 3.1 3.8 0.10037 123
11 15 160M 1775 92.4 0.82 36.4 21.1 18.2 8.3 3.1 3.8 0.10037 139
15 20 160L 1775 93 0.81 50.0 29.2 25.0 8.3 3.3 4 0.12143 161
19 25 180M 1775 93.6 0.81 61.2 35.9 30.6 8.5 3.4 3.6 0.20013 187
22 30 180L 1775 93.6 0.82 72.0 42.1 36.0 9.5 3.8 3.9 0.22722 205
30 40 200L 1780 94.1 0.81 98.8 57.7 49.4 8.2 3 3.6 0.34685 259
37 50 200L 1780 94.5 0.81 121 71.3 60.7 8.3 3.6 3.6 0.39943 284
37 50 225S/M 1785 94.5 0.84 117 68.5 58.5 8.6 3.1 3.7 0.88216 423
45 60 225S/M 1780 95 0.85 140 83.9 69.9 8.2 3.2 3.7 0.95297 437
56 75 250S/M 1780 95.4 0.85 170 100 85.1 8.2 3.3 3.1 1.10928 519
75 100 250S/M 1780 95.4 0.86 230 136 115 8.2 3.2 3 1.21389 531
75 100 280S/M 1787 95.4 0.85 232 137 116 8.6 2.6 3 2.25382 764
93 125 280S/M 1785 95.4 0.85 278 164 139 8.1 2.7 3.4 2.55179 829
112 150 280S/M 1785 95.8 0.85 340 198 170 7.9 2.8 3 3.24774 884
112 150 315S/M 1790 95.8 0.85 340 200 170 8 3 3.2 2.47447 1010
131 175 315S/M 1790 96.2 0.85 406 239 203 8.7 3.1 3.4 2.93843 1095
149 200 315S/M 1790 96.2 0.86 456 273 228 7.8 2.8 2.8 4.43090 1224
164 220 315S/M 1790 96.2 0.85 492 287 246 8 3.2 3.2 3.23955 1152
187 250 315S/M 1790 96.2 0.85 568 332 284 7.9 3.2 3.1 3.46219 1300
201 270 315L 1792 96.2 0.85 614 358 307 8.1 3.4 3.1 3.93450 1332
201 270 315S/M 1790 96.2 0.85 614 358 307 7.8 3.1 3.1 3.69300 1332
201 270 355M/L 1792 96.2 0.85 614 368 307 7.9 2.7 3 7.00878 1495
224 300 315L 1790 96.2 0.85 676 398 338 7.9 3.1 2.8 6.85703 1430
224 300 355M/L 1790 96.2 0.84 684 402 342 7.9 2.7 3.2 7.51711 1554
254 340 315L 1790 96.2 0.85 768 451 384 8.9 3.5 3.4 8.38871 1527
254 340 355M/L 1790 96.2 0.85 768 456 384 7.9 2.8 3.1 8.59098 1621
261 350 315L 1790 96.2 0.85 768 469 384 7.9 3.5 3.4 8.38871 1527
261 350 355M/L 1790 96.2 0.85 798 475 399 7.8 2.8 3.1 8.59098 1621
283 380 355M/L 1790 96.2 0.85 860 505 430 7.9 2.9 3.2 9.66485 1695
321 430 355M/L 1790 96.5 0.83 988 575 494 8.8 3.1 3.5 10.71677 1772
358 480 355M/L 1790 96.5 0.85 1086 640 543 7.8 2.7 2.9 11.58609 1878

Tel. : +34 96 1665200

21 e-mail: info@pumpsgp.com
 Product Data

MOTOR PERFORMANCE DATA - 1200 RPM, 230/380/460V (6 POLE)

IE 3 PREMIUM EFFICIENCY
Rated current DOL starting Break
Rated Rated down Moment
output Efficiency Power [A] Locked rotor Locked rotor Torque / of inertia Gross
Frame speed factor weight
PN h current / Torque /
size n Rated J
[%] [cos φ] [kg]
[min¯¹] 230V 380V 460V Rated current Rated Torque Torque [kgm²]
kW HP IL/IN TL/TN TB/TN
0.19 0.25 71 1110 67.5 0.53 1.26 0.669 0.632 3.7 2.3 2.7 0.00093 11.5
0.37 0.5 80 1140 75.3 0.7 1.76 0.968 0.881 5.1 2.4 2.8 0.00253 12.5
0.56 0.75 90S 1165 81.7 0.67 2.52 1.46 1.26 6.4 2.6 3.4 0.00549 19
0.75 1 90L 1155 82.5 0.68 3.36 1.9 1.68 6.4 3 3.5 0.00658 25
1.5 2 L100L 1165 88.5 0.68 6.26 3.63 3.13 7.3 3 3 0.01755 38
2.2 3 132S 1175 89.5 0.7 8.82 5.19 4.41 6.9 1.8 3.1 0.04920 63
3.0 4 132S 1175 89.5 0.7 12.0 6.89 6.01 7.4 2.2 3.1 0.04530 61
4.1 5.5 132M 1165 89.5 0.71 15.8 9.21 7.90 7 1.9 3 0.05660 66
5.6 7.5 132M/L 1170 91 0.7 21.6 12.7 10.8 7.9 2.4 3.2 0.07550 80
5.6 7.5 160M 1180 91 0.79 19.2 11.5 9.60 7.2 2.4 3.1 0.13167 115
7.5 10 160M 1180 91 0.75 27.6 16 13.8 7.4 3 3.5 0.12209 122
9.3 12.5 160L 1181 91.7 0.78 32.2 18.8 16.1 8 3 3.4 0.14364 137
11 15 160L 1180 91.7 0.77 39.2 22.2 19.6 8.1 2.8 3.4 0.15800 143
15 20 180L 1180 91.7 0.83 49.4 29.3 24.7 9.2 3 3.9 0.32395 193
19 25 200L 1180 93 0.81 61.6 36.3 30.8 7.3 2.6 3.1 0.38611 223
22 30 200L 1180 93 0.8 74.2 42.9 37.1 7.3 2.8 3.3 0.45631 255
30 40 225S/M 1185 94.1 0.84 95.2 56.6 47.6 8.5 2.7 3.3 1.28804 401
37 50 250S/M 1187 94.1 0.84 118 69.7 58.8 7.8 2.7 2.8 1.42400 486
45 60 280S/M 1190 94.5 0.8 149 85.9 74.7 8.1 2.6 3.4 2.80126 678
56 75 280S/M 1190 94.5 0.81 180 106 90.2 7.5 2.6 3.3 3.24946 723
75 100 315S/M 1194 95 0.81 244 142 122 7.6 2.6 3.1 3.33837 962
93 125 315S/M 1194 95.4 0.81 292 170 146 7 2.6 3.1 3.99682 1048
112 150 315S/M 1190 95.8 0.81 356 207 178 7 2.5 2.7 4.44091 1106
131 175 315S/M 1190 95.8 0.81 428 248 214 8.1 2.9 3.2 5.10705 1190
149 200 315L 1190 95.8 0.82 480 282 240 7.3 2.8 3 11.13558 1365
149 200 315S/M 1190 95.8 0.82 480 282 240 7.3 2.8 3 5.77319 1365
164 220 315L 1190 95.8 0.81 518 301 259 7.4 3 3.2 11.13558 1448
164 220 355M/L 1195 95.8 0.78 538 310 269 7 2.4 2.9 10.18806 1594
187 250 355M/L 1195 95.8 0.78 622 362 311 7.1 2.5 2.9 11.11424 1666
201 270 355M/L 1195 95.8 0.79 664 387 332 7.2 2.4 2.8 12.04043 1739
224 300 355M/L 1195 95.8 0.78 740 424 370 7 2.6 2.9 13.40397 1854
254 340 355M/L 1195 95.8 0.78 840 482 420 7.5 2.6 2.8 15.02169 1970
261 350 355M/L 1195 95.8 0.78 874 501 437 7 2.6 2.8 15.02169 1970
283 380 355M/L 1195 96 0.78 938 538 469 7 2.4 2.7 15.02169 1970

Tel. : +34 96 1665200

22 e-mail: info@pumpsgp.com
 Product Data

FOOT MOUNTED (IM B3) MOTOR DIMENSIONAL DRAWING

IE 2 / IE3 HIGH / PREMIUM EFFICIENCY

L
AG LL
KK
LD

ED
AD

ØD

AC
HA
H

A
ØK
AA AA E C B
AB
F GA BB
ØDH
G

Frame Pole A AA AB AC AD AG B BB C D DH E ED F G GA H HA K KK L LD LL
71 2, 4, 6, 8 112 25 133 144 110 85 90 112 45 14 M5 30 25 5 11 16 71 11 7 1x3/4" 246 120 85
80 2, 4, 6, 8 125 38 155 171 125 85 100 126 50 19 M6 40 34 6 15.5 21.5 80 10 10 1x3/4" 284 140 85
90S 2, 4, 6, 8 140 36 168 178 149 98 100 158 56 24 M8 50 42 8 20 27 90 13 10 2x3/4" 333 148 98
90L 2, 4, 6, 8 140 36 168 178 149 98 100 158 56 24 M8 50 42 8 20 27 90 13 10 2x3/4" 333 148 98
100L 2, 4, 6, 8 160 38 195 194 156 98 140 170 63 28 M10 60 52 8 24 31 100 14 12 2x3/4" 371 157 98
112M 2, 4, 6, 8 190 42 230 218 169 98 140 170 63 28 M10 60 52 8 24 31 100 14 12 2x3/4" 398 160 98
132S 2, 4, 6, 8 216 65 257 262 192 131 140 182 89 38 M12 80 68 10 33 41 132 18 12 2x1" 459 202 131
132M 2, 4, 6, 8 216 65 257 262 192 131 178 220 89 38 M12 80 68 10 33 41 132 18 12 2x1" 497 202 131
160M 2, 4, 6, 8 254 55 305 304 244 171 210 260 108 42 M16 110 96 12 37 45 160 19 15 2x1" 597 282 195
160L 2, 4, 6, 8 254 55 305 304 244 171 254 300 108 42 M16 110 96 12 37 45 160 19 15 2x1" 637 282 195
180M 2, 4, 6, 8 279 66 342 357 296 265 241 284 121 48 M16 110 96 14 42.5 51.5 180 27 15 2xM40x1.5 720 280 195
180L 2, 4, 6, 8 279 66 342 357 296 265 279 340 121 48 M16 110 96 14 42.5 51.5 180 27 15 2xM40x1.5 758 280 195
200L 2, 4, 6, 8 318 86 400 392 308 265 305 360 133 55 M20 110 96 16 49 59 200 30 19 2xM50x1.5 806 288 195
225S 4, 6, 8 356 85 450 425 330 265 286 370 149 60 M20 140 122 18 53 64 225 32 19 2xM50x1.5 856 325 195
2 356 85 450 425 330 265 311 395 149 55 M20 110 96 16 49 59 225 32 19 2xM50x1.5 851 295 195
225M
4, 6, 8 356 85 450 425 330 265 311 395 149 60 M20 140 122 18 53 64 225 32 19 2xM50x1.5 881 325 195
2 406 90 480 493 382 286 349 414 168 60 M20 140 122 18 53 64 250 24 24 2xM63x1.5 881 355 253
250M
4, 6, 8 406 90 480 493 382 286 349 414 168 65 M20 140 122 18 58 69 250 24 24 2xM63x1.5 881 355 253
2 457 100 540 548 445 325 368 490 190 65 M20 140 122 18 58 69 280 42 24 2xM63x1.5 1025 362 240
280S
4, 6, 8 457 100 540 548 445 325 368 490 190 75 M20 140 122 20 67.5 79.5 280 42 24 2xM63x1.5 1025 362 240
2 457 100 540 548 445 325 368 490 190 65 M20 140 122 18 58 69 280 42 24 2xM63x1.5 1025 362 240
280M
4, 6, 8 457 100 540 548 445 325 368 490 190 75 M20 140 122 20 67.5 79.5 280 42 24 2xM63x1.5 1025 362 240
2 508 123 635 625 519 284 406 570 216 65 M20 140 122 18 58 69 315 43 28 2xM63x1.5 1182 394 397
315S
4, 6, 8 508 123 635 625 519 284 406 570 216 80 M20 170 150 22 71 85 315 43 28 2xM63x1.5 1212 424 397
2 508 123 635 625 519 284 457 680 216 65 M20 140 122 18 58 69 315 43 28 2xM63x1.5 1292 394 397
315M
4, 6, 8 508 123 635 625 519 284 457 680 216 80 M20 170 150 22 71 85 315 43 28 2xM63x1.5 1322 424 397
2 508 123 635 625 519 284 508 680 216 65 M20 140 122 18 58 69 315 43 28 2xM63x1.5 1292 424 397
315L
4, 6, 8 508 123 635 625 519 284 508 680 216 80 M20 170 150 22 71 85 315 43 28 2xM63x1.5 1322 424 397
2 610 120 700 725 603 380 560 827 254 70 M20 140 122 20 62.5 74.5 355 45 35 2xM63x1.5 1514 397 330
355M
4, 6, 8 610 120 700 725 603 380 560 827 254 100 M24 210 185 25 81 105 355 45 35 2xM63x1.5 1584 467 330
2 610 120 700 725 603 380 630 827 254 70 M20 140 122 20 62.5 74.5 355 45 35 2xM63x1.5 1514 397 330
355L
4, 6, 8 610 120 700 725 603 380 630 827 254 100 M24 210 185 25 81 105 355 45 35 2xM63x1.5 1584 467 330
Note: All dimensions in mm unless otherwise noted.

Tel. : +34 96 1665200

23 e-mail: info@pumpsgp.com
 Product Data

"C" TYPE FLANGE MOUNTED (IM B14) MOTOR DIMENSIONAL DRAWING

IE 2 / IE3 HIGH / PREMIUM EFFICIENCY

L
AG LL
LD KK

ED
AD

45°

ØD

AC
E

4 NOS. TAP 'S'

T
ØN ON PCD 'M'
LB
ØP
F GA
ØDH
G

Frame Pole AC AD AG D DH E ED F G GA KK L LB LD LL M N P S T
71 2, 4, 6, 8 144 110 85 14 M5 30 25 5 11 16 1x3/4" 246 216 120 85 85 70 105 M6 2.5
80 2, 4, 6, 8 171 140 98 19 M6 40 34 6 15.5 21.5 2x3/4" 284 244 140 98 100 80 120 M6 3
90S 2, 4, 6, 8 178 149 98 24 M8 50 42 8 20 27 2x3/4" 333 284 169 98 115 95 140 M8 3
90L 2, 4, 6, 8 178 149 98 24 M8 50 42 8 20 27 2x3/4" 333 284 169 98 115 95 140 M8 3
100L 2, 4, 6, 8 194 156 98 28 M10 60 52 8 24 31 2x3/4" 371 311 157 98 130 110 160 M8 3.5
112M 2, 4, 6, 8 218 169 98 28 M10 60 52 8 24 31 2x3/4" 398 338 160 98 130 110 160 M8 3.5
132S 2, 4, 6, 8 262 192 131 38 M12 80 68 10 33 41 2x1" 459 378 202 131 165 130 200 M10 3.5
132M 2, 4, 6, 8 262 192 131 38 M12 80 68 10 33 41 2x1" 497 417 202 131 165 130 200 M10 3.5
160M 2, 4, 6, 8 304 244 171 42 M16 110 96 12 37 45 2x1" 597 486 282 195 215 180 250 M12 4
160L 2, 4, 6, 8 304 244 171 42 M16 110 96 12 37 45 2x1" 637 527 282 195 215 180 250 M12 4
Note: All dimensions in mm unless otherwise noted.

Tel. : +34 96 1665200

24 e-mail: info@pumpsgp.com
 Product Data

"B" TYPE FLANGE MOUNTED (IM B5) MOTOR DIMENSIONAL DRAWING

IE 2 & IE3 HIGH / PREMIUM EFFICIENCY

AG LL
KK
LD
45°
LA

ØS
AD
ED
ØN

ØD

AC
E
ØP

ØM

T
F GA LB
ØDH
G

Frame Pole AC AD AG D DH E ED F G GA KK L LA LB LD LL M N P S T
71 2, 4, 6, 8 144 110 85 14 M5 30 25 5 11 16 1x3/4" 246 9 216 120 85 130 110 160 10 3.5
80 2, 4, 6, 8 171 140 98 19 M6 40 34 6 15.5 21.5 2x3/4" 284 10 244 140 98 165 130 200 12 3.5
90S 2, 4, 6, 8 178 149 98 24 M8 50 42 8 20 27 2x3/4" 333 10 284 169 98 165 130 200 12 3.5
90L 2, 4, 6, 8 178 149 98 24 M8 50 42 8 20 27 2x3/4" 333 10 284 169 98 165 130 200 12 3.5
100L 2, 4, 6, 8 194 156 98 28 M10 60 52 8 24 31 2x3/4" 371 11 311 157 98 215 180 250 15 4
112M 2, 4, 6, 8 218 169 98 28 M10 60 52 8 24 31 2x3/4" 398 12 338 160 98 215 180 250 15 4
132S 2, 4, 6, 8 262 192 131 38 M12 80 68 10 33 41 2x1" 459 13 378 202 131 265 230 300 15 4
132M 2, 4, 6, 8 262 192 131 38 M12 80 68 10 33 41 2x1" 497 13 417 202 131 265 230 300 15 4
160M 2, 4, 6, 8 304 244 171 42 M16 110 96 12 37 45 2x1" 597 13 486 282 195 300 250 350 19 5
160L 2, 4, 6, 8 304 244 171 42 M16 110 96 12 37 45 2x1" 637 13 527 282 195 300 250 350 19 5
180M 2, 4, 6, 8 357 296 265 48 M16 110 96 14 42.5 51.5 2xM40x1.5 720 18 610 280 195 300 250 350 19 5
180L 2, 4, 6, 8 357 296 265 48 M16 110 96 14 42.5 51.5 2xM40x1.5 758 18 649 280 195 300 250 350 19 5
200L 2, 4, 6, 8 392 308 265 55 M20 110 96 16 49 59 2xM50x1.5 806 16 696 288 195 350 300 400 19 5
225S 4, 6, 8 425 330 265 60 M20 140 122 18 53 64 2xM50x1.5 856 17 716 325 195 400 350 450 19 5
2 425 330 265 55 M20 110 96 16 49 59 2xM50x1.5 851 17 741 295 195 400 350 450 19 5
225M
4, 6, 8 425 330 265 60 M20 140 122 18 53 64 2xM50x1.5 881 17 741 325 195 400 350 450 19 5
2 493 382 286 60 M20 140 122 18 53 64 2xM63x1.5 881 19 741 355 253 500 450 550 19 5
250M
4, 6, 8 493 382 286 65 M20 140 122 18 58 69 2xM63x1.5 881 19 741 355 253 500 450 550 19 5
2 548 445 325 65 M20 140 122 18 58 69 2xM63x1.5 1025 19 885 362 240 500 450 550 19 5
280S
4, 6, 8 548 445 325 75 M20 140 122 20 67.5 79.5 2xM63x1.5 1025 19 885 362 240 500 450 550 19 5
2 548 445 325 65 M20 140 122 18 58 69 2xM63x1.5 1025 19 885 362 240 500 450 550 19 5
280M
4, 6, 8 548 445 325 75 M20 140 122 20 67.5 79.5 2xM63x1.5 1025 19 885 362 240 500 450 550 19 5
2 625 519 284 65 M20 140 122 18 58 69 2xM63x1.5 1182 24 1042 394 397 600 550 660 24 6
315S
4, 6, 8 625 519 284 65 M20 170 150 22 71 85 2xM63x1.5 1212 24 1042 424 397 600 550 660 24 6
2 625 519 284 65 M20 140 122 18 58 69 2xM63x1.5 1292 24 1152 394 397 600 550 660 24 6
315M
4, 6, 8 625 519 284 65 M20 170 150 22 71 85 2xM63x1.5 1322 24 1152 424 397 600 550 660 24 6
2 625 519 284 65 M20 140 122 18 58 69 2xM63x1.5 1292 24 1152 424 397 600 550 660 24 6
315L
4, 6, 8 625 519 284 65 M20 170 150 22 71 85 2xM63x1.5 1322 24 1152 424 397 600 550 660 24 6
2 725 603 380 70 M20 140 122 20 62.5 74.5 2xM63x1.5 1514 25 1374 397 330 740 680 800 24 6
355M
4, 6, 8 725 603 380 100 M24 210 185 25 81 105 2xM63x1.5 1584 25 1374 467 330 740 680 800 24 6
2 725 603 380 70 M20 140 122 20 62.5 74.5 2xM63x1.5 1514 25 1374 397 330 740 680 800 24 6
355L
4, 6, 8 725 603 380 100 M24 210 185 25 81 105 2xM63x1.5 1584 25 1374 467 330 740 680 800 24 6
Note: All dimensions in mm unless otherwise noted.

Tel. : +34 96 1665200

25 e-mail: info@pumpsgp.com
 Product Data

SHIPPING DIMENSIONS

IE 2 / IE 3 HIGH / PREMIUM EFFICIENCY

Gross weight [kg]
Frame Package dimensions Gross volume
IE 2 IE 3 [mm] [m³]
size
2 pole 4 pole 6 pole 2 pole 4 pole 6 pole

63 - - - - - - 300 x 235 x 185 0.013

71 - - - - - - 300 x 235 x 185 0.013

80 21 22 - 23 24 - 320 x 235 x 205 0.015

90S 26 27 27 29 30 30 390 x 270 x 245 0.026

90L 29 32 29 32 35 32 390 x 270 x 245 0.026

100L 55 61 54 61 67 59 510 x 380 x 380 0.074

112M 62 67 64 68 74 70 510 x 380 x 380 0.074

132S 101 98 96 111 108 106 660 x 435 x 460 0.132

132M - 108 115 - - 127 660 x 435 x 460 0.132

160M 161 162 175 177 178 193 750 x 535 x 430 0.173

160L 177 173 192 195 190 211 800 x 535 x 430 0.184

180M 248 247 - 260 259 - 965 x 610 x 660 0.389

180L - 286 260 - - 273 965 x 610 x 660 0.389

200L 328 337 318 344 354 334 1020 x 635 x 690 0.447

225S - 383 - - - - 1070 x 635 x 740 0.503

225M 421 413 390 442 434 410 1070 x 635 x 740 0.503

250M 515 528 512 541 554 538 1095 x 660 x 865 0.625

280S 655 645 628 688 677 659 1270 x 790 x 1020 1.020

280M 703 745 677 738 782 711 1270 x 790 x 1020 1.020

315S 1078 1080 1063 1132 1134 1116 1410 x 830 x 1140 1.334

315M 1139 1167 1143 1196 1225 1200 1410 x 830 x 1140 1.410

315L 1272 1355 1338 1336 1423 1405 1410 x 830 x 1140 1.438

355M 2088 1884 1782 2192 1978 1871 1740 x 950 x 1250 2.066

355L 2496 2090 1884 2621 2195 1978 1740 x 950 x 1250 2.066

Tel. : +34 96 1665200

26 e-mail: info@pumpsgp.com
GENERAL PUMPS, S.L.U.
Pol. Ind. El Oliveral (U.E.7, Nave n°1) - Calle W 46394
Ribarroja del Turia - Valencia Spain
Tel. : +34 96 1665200 / Fax :+34 96 1665052
E-mail: info@pumpsgp.com
www.pumpsgp.com