Wi-Fi Network Report
Wi-Fi Network Report
1
Wi-Fi Network Report
Network capacity configuration
2.4 GHz 5 GHz
Minimum Data Rate 12 Mbits/s 12 Mbits/s
Band steering N/A N/A
Number of SSIDs 2 2
Max. Associated Clients 200 200
RTS / CTS No No
2
Wi-Fi Network Report
eka
Survey routes and Access Points for eka
Area-1 (0.1 m²)
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
Capacity Requirement
No capacity devices for this area
Notes
Area-2 (41.8 m²)
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
3
Wi-Fi Network Report
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
Capacity Requirement
No capacity devices for this area
Notes
Area-3 (73.7 m²)
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
Capacity Requirement
No capacity devices for this area
Notes
Area-4 (25.0 m²)
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
4
Wi-Fi Network Report
Capacity Requirement
No capacity devices for this area
Notes
Area-5 (53.4 m²)
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
Capacity Requirement
No capacity devices for this area
Notes
Area-6 (71.2 m²)
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
Capacity Requirement
No capacity devices for this area
Notes
5
Wi-Fi Network Report
6
Wi-Fi Network Report
Signal Strength for eka on 2.4 GHz band
Signal Strength - sometimes called coverage - is the most basic requirement for a
wireless network. As a general guideline, low signal strength means unreliable
connections, and low data throughput.
7
Wi-Fi Network Report
Signal Strength for eka on 5 GHz band
Signal Strength - sometimes called coverage - is the most basic requirement for a
wireless network. As a general guideline, low signal strength means unreliable
connections, and low data throughput.
8
Wi-Fi Network Report
Signal To Noise Ratio (SNR) for eka on 2.4 GHz band
Signal-To-Noise Ratio indicates how much the signal strength is stronger than the
noise (co-channel interference). Signal must be stronger than noise (SNR greater
than zero) for data transfer to be possible. If the signal is only barely stronger than
noise, you may encounter occasional connection drop-offs.
9
Wi-Fi Network Report
Signal To Noise Ratio (SNR) for eka on 5 GHz band
Signal-To-Noise Ratio indicates how much the signal strength is stronger than the
noise (co-channel interference). Signal must be stronger than noise (SNR greater
than zero) for data transfer to be possible. If the signal is only barely stronger than
noise, you may encounter occasional connection drop-offs.
10
Wi-Fi Network Report
Channel Overlap for eka on 2.4 GHz band
Channel overlap indicates the number of access points audible at each location in a
single channel.
11
Wi-Fi Network Report
Channel Overlap for eka on 5 GHz band
Channel overlap indicates the number of access points audible at each location in a
single channel.
12
Wi-Fi Network Report
Number of APs for eka on 2.4 GHz band
Number of Access Points indicates the number of access points audible at each
location.
13
Wi-Fi Network Report
Number of APs for eka on 5 GHz band
Number of Access Points indicates the number of access points audible at each
location.
14
Wi-Fi Network Report
Interference/Noise for eka on 2.4 GHz band
Displays the calculated co-channel interference level.
15
Wi-Fi Network Report
Interference/Noise for eka on 5 GHz band
Displays the calculated co-channel interference level.
16
Wi-Fi Network Report
Data Rate for eka on 2.4 GHz band
Data Rate is the highest possible speed (measured in megabits per second) at which
the wireless devices will be transmitting data. Typically the true data throughput is
about half of the data rate or less.
17
Wi-Fi Network Report
Data Rate for eka on 5 GHz band
Data Rate is the highest possible speed (measured in megabits per second) at which
the wireless devices will be transmitting data. Typically the true data throughput is
about half of the data rate or less.
18
Wi-Fi Network Report
Throughput for eka on 2.4 GHz band
Displays the measured throughput. If no measured throughput is available, then the
estimated maximum throughput is shown instead.
19
Wi-Fi Network Report
Throughput for eka on 5 GHz band
Displays the measured throughput. If no measured throughput is available, then the
estimated maximum throughput is shown instead.
20
Wi-Fi Network Report
Associated Access Point for eka
Displays the access point the client device is associated with. The image shows
Predicted Association - Signal Strength
AP # Access Point
1 Generic .11n/ac Dual Radio (1)
802.11n 11 6 mW Generic 2.2dBi Omni
802.11ac 124 25 mW Generic 2.2dBi Omni
2 Generic .11n/ac Dual Radio (2)
802.11n 1 6 mW Generic 2.2dBi Omni
802.11ac 116 25 mW Generic 2.2dBi Omni
21
Wi-Fi Network Report
Network Health for eka on 2.4 GHz band
Wi-Fi is typically built for a certain purpose or several purposes, such as VoIP, web
browsing, or location tracking. With Network Health, you can, with a single
visualization, display whether the network meets your requirements or not.
22
Wi-Fi Network Report
Network Health for eka on 5 GHz band
Wi-Fi is typically built for a certain purpose or several purposes, such as VoIP, web
browsing, or location tracking. With Network Health, you can, with a single
visualization, display whether the network meets your requirements or not.
23
Wi-Fi Network Report
Network Issues for eka on 2.4 GHz band
Network Issues complements Network Health by showing the requirement that is
below the threshold level at each location. Whereas Network Health answers the
question "Does it work?", Network Issues answers the question "If it doesn't work,
why?".
24
Wi-Fi Network Report
Network Issues for eka on 5 GHz band
Network Issues complements Network Health by showing the requirement that is
below the threshold level at each location. Whereas Network Health answers the
question "Does it work?", Network Issues answers the question "If it doesn't work,
why?".
25
Wi-Fi Network Report
Access Points on eka
26
Wi-Fi Network Report
My Access Points on eka
Simulated Access Points on eka
AP # Access Point
1 Generic .11n/ac Dual Radio (1)
802.11n 11 6 mW Generic 2.2dBi Omni
802.11ac 124 25 mW Generic 2.2dBi Omni
2 Generic .11n/ac Dual Radio (2)
802.11n 1 6 mW Generic 2.2dBi Omni
802.11ac 116 25 mW Generic 2.2dBi Omni
Measured Access Points on eka
None.
27
Wi-Fi Network Report
Other Access Points on eka
Simulated Access Points on eka
None.
Measured Access Points on eka
None.
28
Wi-Fi Network Report
Channel Bandwidth for eka on 2.4 GHz band
Shows the maximum channel bandwidth available in each area.
29
Wi-Fi Network Report
Channel Bandwidth for eka on 5 GHz band
Shows the maximum channel bandwidth available in each area.
30
Wi-Fi Network Report
report_cover
Survey routes and Access Points for report_cover
Coverage Requirement: Voice + Signal Strength Min -67.0 dBm
Data
Signal-to-noise Ratio Min 20.0 dB
Data rate Min 20 Mbps
Number of Access Points Min 2 at min. -75.0 dBm
Channel Overlap Max 2 at min. -85.0 dBm
Round Trip Time (RTT) Max 200ms
Packet Loss Max 2.0 %
31
Wi-Fi Network Report
Access Points on report_cover
32
Wi-Fi Network Report
My Access Points on report_cover
Simulated Access Points on report_cover
None.
Measured Access Points on report_cover
None.
33
Wi-Fi Network Report
Other Access Points on report_cover
Simulated Access Points on report_cover
None.
Measured Access Points on report_cover
None.
34
Wi-Fi Network Report
Measured Access Points not placed on any map
My Access Points not placed on any map
None.
Other Access Points not placed on any map
None.
35
