IBIS MEDICAL
Every newborn deserves the safest and most nurturing start to
life. The iCore 501 infant warmer from Ibis Medical provides
exceptional supplementary heat to the baby, with precise
monitoring and utmost safety.
Our warmers provide infants with precise warmth they need
for a safe and comfortable start to life. Engineered for both
performance and ease of use, iCore 501 provides a unique
blend of performance and safety.
Safe
iCore 501 comes with a unique first in class Sensor
Displacement Detection System. If by any chance, the
temperature sensor is displaced from patient body, iCore 501
will automatically regulate the temperature to 50% heater output
& sound an alarm. Thus ensuring that the baby is safe at all
times.
iCore 100 infant warmers provide accurate audio visual alarms
for easy problem identification.
Baby safety is ensured with our prompt heater cut-off if the baby
skin temperature exceeds 38 C.
Feature Rich
iCore 501 comes with a host of useful features. These include
A pre-warm mode in addition to Servo and Manual modes.
APGAR timer.
Timer with alarm which can be set between 30 minutes to 5
hours in half an hour intervals.
Centigrade to Fahrenheit toggle button.
All important audio visual alarms which include
High and low temperature alarms.
Power failure, probe failure, heater failure alarms.
High temperature cutoff alarm if the baby temperature
exceeds 38° C.
Check Patient alarm, which sounds every 15 minutes (in
manual mode)
Engineered for Efficiency
iCore 501 infant warmers are well designed and engineered to do
what matters most to you. Which is, to provide the optimum &
uniform heating across the baby mattress, allowing greater thermal
comfort to the baby.
Our 600W quartz infrared heater coupled with parabolic design
SS reflector provides fast and effective heating.
Our super responsive thermistor sensors are specially designed
only for our infant warmers. They are very fast and very
accurate, which makes our warmers very sensitive to quick
temperature changes on baby body.
iCore 501
Infant Warmer
with Integrated Bed & Tray
IBIS MEDICAL
Operating Controls
Operating Modes Servo, Pre-warm & Manual Mode
Temperature Set Range 32° C to 37.5° C
Operating Temperature (Servo) 25° C to 40° C
Temperature Conversion C to F Toggle Button
Heater Power Bar Graph 0 to 100% in increments of 10%
Keyboard lock : Disable key functions after 10 seconds of inactivity
APGAR Timer / Countdown timer from 30 minutes to 5 hours.
Audio Visual Alarms
Sensor Displacement Detection System Check Patient Alarm
Alarm Mute (Only in Manual mode.
Heater Failure Every 15 minutes)
Over Temperature Cutoff (≥ 38° C) Power Failure
High Temperature (≥ 0.5° C of set temp) Probe Failure
Low Temperature (≤ 1.0° C of set temp)
Key Performance Elements Heater Element : Quartz Infrared
Temperature Sensor Probe : Thermistor
Heater
Accuracy of Skin Sensor : ± 0.1° C
Heater Max Power : 600 W
Calibration of Skin Sensor : Not required
Observation Lamp : 7 V LED
when replaced
5100K
Physical Attributes
Equipment dimensions (LxWxH): 92x59x179m
Equipment weigh. 54 Kg. 65 Kg fully packed.
Mattress from floor : 89cm
Heater height from mattress : 80 cm
Mattress dimensions (LxB) : 67x53cm. Thickness 5 cm
Maximum load : 12 Kg.
Baby Trays: 1 large baby trays. Can hold up to 4 kgs.
Heater Module Swivel: Up to 90° Either side
Side Wall: Clear Acrylic, easy drop down with tubing port.
X Ray Cassette Holder Compatible
Electrical Specifications
AC Input 180- 240 vAC, 2.5A 50Hz with +/- 10% tolerance
Max Rating 5A @ 250vAC, 50Hz
Fuses 5A , 250 V AC
Maximum Heater Wattage 600 Watts
Maximum Power Requirement : 615 Watts
Quality Certifications
Environmental Specifications
Operating Temperature 15- 40⁰ C
Storage Temperature : - 25 to 60⁰ C
Operating Humidity 0 - 93% RH Non Condensing
IEC 60601-1 : 2020
ISO 13485: 2016 Storage Humidity 0 - 99% RH Non Condensing
IEC 60601-2-21 : 2020
Licence Number: MFG/MD/2024/000892 Product Safety & Statutory Certifications
Unit is IEC 60601-1:2022 60601-2-50:2005 product safety compliant.
Tested by NABL approved lab.
ISO 13485 certified manufacturer. Certified by CDSCO approved notified
body.
Ibis Medical Equipment & Manufacturing Licence from CDSCO.
Systems Pvt Ltd.
45/279, Koothapady Road, Anjumurri,
Thammanam, Ernakulam, Kerala - 682032
INDIA
marketing@ibismedical.net (91) 9820226337 / 8086658881
www.ibismedical.net
