GLOBAL FRL & P3Y SERIES

CATALOG 0760P
Filters, Regulators, Lubricators,& Airline Accessories.
Warning, Offer of Sale

       WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED
ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product
and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of
your application including consequences of any failure, and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its
own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all
performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are
subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized
distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled
“Offer of Sale”.
© Copyright 2020, 2018, 2016 Parker Hannifin Corporation. All Rights Reserved

Catalog 0760P For inventory, lead Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Parker Pneumatic Contents - www.parker.com/pneu/frl

Introduction 2-9

P31, P32, P33 Series

Global System 11
Particulate Filters 12 - 17
Coalescing Filters 18 - 23
Regulators 24 - 33
Proportional Regulators 34 - 43
Filter / Regulators 44 - 49
Lubricators 50 - 55
Combinations 56 - 59
Dump Valves / Soft Start Valves 60 - 65
Safety Exhaust Valve 66 - 69
Accessories 70 - 80

P3Y Series
P3Y System 81
Particulate Filters 82 - 83
Coalescing Filters 84 - 85
Regulators 86 - 89
Proportional Pressure Regulators 90 - 91
Filter / Regulators 92 - 93
Lubricators 94 - 95
Combinations 96 - 97
Soft Start / Dump Valves 98 - 101
Accessories 102 - 105

Safety Guide 106 - 107

Offer of Sale 108 - 110

Catalog 0760P For inventory, lead 1 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

COMPLIANT
DECLARATION OF COMPLIANCE (ROHS) ATEX
European Directive 2011/65/EU – RoHS (Restriction us of certain Following Ignition Hazard Assessments performed on the non-
Hazardous Substances in electrical and electronic equipment), electrical Global Air Preparation products they are in accordance
restricts the use of the 6 substances in the manufacture of specified with the requirements of EN 13463-1:2009, it was considered that the
electrical equipment. equipment does not contain its own source of ignition, and therefore
Lead: Product containing lead and its compound (except for is not within the scope of directive 94/9/EC.
applications of lead as an alloying element by weight in The products can be used in a Group II Category 2 environment
steel up to 0.35%, in aluminium up to 0.4% and in copper assuming that the ATEX Directive and the following conditions are
alloys up to 4% and in circuit board solder) must not complied with:
exceed 0.1% by weight • Installation and maintenance of the product must be undertaken
Mercury: The concentration level must not exceed 0.1% by volume by qualified personnel.
Cadmium: The concentration level must not exceed 0.01% by • Do not mount the products in an area where impact may occur.
volume • Filters must be used to limit the introduction of particles and to
Hexavalent Chromiou: capture particles generated in service.
This is a corrosive protective finish used on our product • Supply air quality must be within ISO 8573-1:2010 Class 1.4.2.
line. Where this finish is utilized the Chromate solution • Maximum working temperature to be as stated on product label.
is Hexavalent (Chrome 6) free. • WARNING – pulsating pressure and/or a closed circuit can
Polybrominated Biphenyls (PBB): generate heat.
The concentration level must not exceed 0.1% by weight. • Deposits of dust on the product must not exceed
This substance is not know to be in any of our products. 5mm thickness.
Polybrominated Diphenyl Esters (PBDE): Refer to technical file for surface areas of plastics. The unit
The concentration level must not exceed 0.1% by must be earthed via the compressed air supply line.
weight. This substance is not know to be in any of our • The unit must not come into contact with liquid solvents, acids or
products. alkalis
Refer to technical file for chemicals known to be
incompatible. Product cleaning must be undertaken using
a method complying with the specifications of the ATEX
zone, preferably by using mild soap and water or antistatic
products.
• Regulators, Filter Regulators:
Global Air Preparation products supplied by Parker Hannifin have Do not use Regulators or Filter Regulators within systems
been designed and manufactured in accordance with “sound that can create vibration within the Regulator / Filter
engineering practice”, as defined by Article 3 of Pressure Equipment Regulator unit.
Directive 97/23/EC. • Solenoid Operated Valves:
Are suitable for use in an ATEX environment, (Group II
Category 2) providing ATEX approved solenoids are fitted.
• Technical file available on request.

Global Air Preparation product range is in compliance with REACH to

ensure continued compliance additions to the list of SVHC (Substance
of Very High Concern) are reviewed periodically.

Global Air Preparation product range has been designed and tested in
accordance with ISO flow testing, envelope integrity, and catalog data
Global Air Preparation product range has been third party Shock presented.
& Vibration tested independently in accordance to EN 61373 : 1999, • Filters – ISO 5782-1 & ISO 5782-2: 1997
Category 2 • Regulators- ISO 6953-1 & ISO 6953-2: 2000
• Lubricators- ISO 6301-1 & ISO 6301-2: 2009

Catalog 0760P For inventory, lead 2 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

Parker’s Modular Air

Preparation System

Global.
Modular.
Performance you need,
wherever you need it.

Full featured particulate and coalescing filters,

regulators, filter/regulators, and lubricators are
available with a wide range of standard options to meet
air preparation needs.

Parker’s comprehensive Air Preparation System is

available in four body sizes with different thread types
to accommodate your requirements.

Individual units can easily be assembled into various

combinations, utilizing patented modular lightweight
body connectors.

www.parker.com

Catalog 0760P For inventory, lead 3 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

Global Comprehensive Offering

P31 Mini Series P32 Compact Series P33 Standard Series

1/4" ports 1/4", 3/8" and 1/2" 1/2" and 3/4"
40mm body width 60mm body width 73mm body width

Filters Regulators Filter / Regulators

• 5µ particulate, 1.0µ and 0.01µ • Available as stand alone, • Compact design for space
coalescing, and adsorber common port and electronic savings
available as standard proportional • Available with all the same
• Transparent or metal bowl with • Both relieving and non-relieving standard options as the filters
manual or auto float drains versions available and regulators
standard

Lubricators Combinations Accessories

• Proportional oil delivery over a • Compact design for space • Solenoid operated soft start,
wide range of air flows savings quick dump, and soft start/
• Fill under pressure • Easily assembled quick dump valves
• Many configurations available • Manifold blocks
• Ball style lockout /
shutoff valve
• Repair kits, gauges, etc.

Catalog 0760P For inventory, lead 4 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

P3Y Comprehensive Offering

P3Y Series
3/4" and 1"
90mm body width

Filters Regulators Filter / Regulators

• 5µ particulate, 1.0µ and 0.01µ • Available as a stand alone • Compact design for space
coalescing, and adsorber high flow unit with a rolling savings
available as standard diaphragm to extend life • Available with all the same
• Polypropylene bowl with metal • Optional key lock standard options as the filters
screw in bowl guard and regulators

Lubricators Combinations Accessories

• Proportional oil delivery over a • Compact design for space • Solenoid operated soft start,
wide range of air flows savings quick dump, and soft start/
• Fill under pressure • Easily assembled quick dump valves
• Manifold blocks
• Ball style lockout /
shutoff valve
• Repair kits, gauges, etc.

Catalog 0760P For inventory, lead 5 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

Air Preparation
P31 Mini Series P32 Compact Series

40mm body width 60mm body width

1/4" Ported 1/4", 3/8", & 1/2" Ported
Flows up to: scfm (dm3/s, ANR) Flows up to: scfm (dm3/s, ANR)
Filter 25 (12) Filter 82 (39)
Coalescer 7.5 (3.6) Coalescer 36 (17)
Regulator 73 (34) Regulator 201 (94)
Filter/Regulator 74 (35) Filter/Regulator 178 (84)
Lubricator 52 (25) Lubricator 90 (42)
Features: Features:
• Space saving integral gauge • Manifold style regulators available
• Manifold style regulators available • OSHA Compliant shut-off valves
• OSHA compliant shut-off valves • Soft-Start & Quick Dump valves
• Soft-Start & Quick Dump valves • Electronic Proportional Regulator
• Electronic Proportional Regulator

P33 Standard Series P3Y Large Series

73mm body width 90mm body width

1/2" & 3/4" Ported 3/4" and 1" Ported
Flows up to: scfm (dm /s, ANR)
3
Flows up to: scfm (dm3/s, ANR)
Filter 102 (48) Filter 170 (80)
Coalescer 42 (20) Coalescer 307 (150)
Regulator 233 (110) Regulator 550 (260)
Filter/Regulator 235 (109) Filter/Regulator 465 (220)
Lubricator 150 (71) Lubricator 390 (184)
Features: Features:
• OSHA Compliant shut-off valves • OSHA Compliant shut-off valves
• Soft-Start & Quick Dump valves • Soft-Start & Quick Dump valves
(Utilizes P32 size only) • Electronic Proportional Regulator
• Electronic proportional regulator
(Utilizes P32 size only)

Catalog 0760P For inventory, lead 6 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

Complete Pneumatic System

Safety Exhaust Valve Optional Tamperproof Kits
• External monitoring • Hinged black part clamps over control knob and is locked in
provides a cost place after sliding yellow cover over it
and space saving advantage • Other allows for removable lockout/tagout tamperproofing
• Solid state pressure - Four pad lock location holes tagout
sensors provide accurate, - Hinged locking clamp secures over existing knob via
fast fault detection yellow cover which is slid over into place
• Quick visual LED indicators
on the front of the valve
• Safety exhaust outlet is
no-maintenance and
non-clog by design
• Suitable for stand alone use (optional soft start)
or modular mounting to P32
or P33 FRL assembly

Common Port Manifold Regulators

• Multiple output pressures (P2, P3, P4, etc.) with common
inlet (P1)
• Available in two sizes P31 and P32
• Balanced valve
design for accurate
pressure regulation
• Outlet pressure
ports in front
and rear P1
of unit
P1
• Multiple
P3 P4
spring ranges
P2
available

Electronic Proportional Regulator

• Electro-Pneumatic regulator
• Integrated systems control
• Accurate output pressure P31P Mini
• Micro parameter settings Series

• Selectable I/O parameters

• Quick, full flow exhaust
• LED display indicates
output pressure
• No air consumption in
steady state P32P
Compact
• Multiple mounting options
Series
• Protection to IP65

Catalog 0760P For inventory, lead 7 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

Together we can power your

application with clean, dry air
Fast cycle times, high product quality, and low downtime all require a clean, dry
pneumatic system to function properly. Parker has what it takes to make sure
pneumatic systems perform at their best.

Clean, dry pneumatic systems with

Parker Air Preparation

Stage 1 2
3
As air is compressed
For every 11°C (20°F)
to 7 bar (100 psig)
that the air cools after
and higher, the relative
leaving the heat of the
humidity quickly reaches
compressor, 50% of the

4
100% RH and air
moisture condenses into Bulk liquid separators
temperatures can reach
liquid into the system. remove condensed
between
110°C and 200°C (230°F liquids after the

5
and 392°F). aftercooler, receiver,
The excess moisture or anywhere within the Particulate filters are
condenses and collects distribution system. used for the removal
in the receiver tank and of solid particle
distribution lines. This Bulk liquid separators contaminants down to 5
condensate must be also help protect micron, as well as Coalescing filters are
removed. downstream filters in the the removal of designed to remove
system where excess condensed liquids water and oil aerosols
cooling takes place. (not vapor) and
Note: Water and oil, particulate from air
in vapor form, pass streams down to 0.01
through general purpose micron in size.
particulate filters.
Installed in pairs,
Particulate and
This type of filter should Coalescing filters ensure
be used as a prefilter for a continuous supply of
Key the coalescing (oil high quality air.
removal) filter.
Particulate
Oil
Water
Oil Vapor
Water Vapor

Catalog 0760P For inventory, lead 8 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Introduction Air Preparation

Stages 1 2 3 4 5 6 7
Bulk Liquid Particulate Coalescing Hydrocarbon
Function Air Compressor Air Dryers
Removal Filtration Filtration Removal
All pneumatic Basic pneumatic Basic pneumatic Systems requiring Systems requiring Systems requiring
Application systems systems systems highest quality air. air with reduced highest quality air for
moisture content critical applications
Air leaving the Removes bulk Removes solid Removes liquid Removes water Removal of odors
compressor room at liquid contamination particulates down to 5 aerosols and vapor from air and trace vapors for
93ºC (200ºF) releases and protects filters micron, and submicron stream. Dew point critical applications.
Description 95% of its moisture where excess cooling the separation of bulk particulates (not reduced down to 4ºC
into the piping system takes place in the contaminants. vapor) down to (40ºF) (refrigeration)
when it cools to 38ºC distribution piping 0.01 micron. or -40ºC (-40ºF)
(100ºF) (desiccant).

Parker Customer P3TF P31, P32, P33, P3Y P31, P32, P33, P3Y Refrigeration Dryer, P31, P32, P33, P3Y
Global Air supplied Bulk Liquid Particulate Filter Coalescing Filter TW Regenerative Activated Carbon
Separator Desiccant Dryer (Adsorber) Filter
Preparation
Solution

Clean
Dry Air
6
Refrigeration and
desiccant dryers lower
the air’s dew point by
removing water vapor,
providing appropriately
dry air for the
7
Hydrocarbon and oil
vapors are removed
downstream application. using filters utilizing
activated carbon.
Airborne hydrocarbons
are often left over from
the compressor oils.

Catalog 0760P For inventory, lead 9 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products

Catalog 0760P For inventory, lead 10 Pneumatic Division | Richland, Michigan

times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Features Air Preparation

A completely modular
air preparation system

Soft Start /
Easy to adjust non-rising Dump Valve
knob with snap-lock,
preventing accidental
change of set pressure
2-piece Patented
modular body
connector US Patent
number 5,383,689
Filter / Regulator
Pressure
gauge
Ball Valve

Aluminum
body
NPT, BSPP or
BSPT porting
available
Coalescing
Filter
Padlock
Bowl guard
slide
with multiple
Quick release
viewing slots
bayonet-type
integral bowl
and bowl guard
assembly
Manual drain with
pipe-away, auto
drain available

Catalog 0760P For inventory, lead

11 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Particulate Filters Air Preparation

P31 Particulate Filter – Mini

• Integral 1/4" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• One hand operation for easy element cartridge removal
• Positive bayonet latch to ensure correct & safe fitting

1 2 1 2

Operating Information
Manual drain Pulse drain
Supply pressure (max):
Plastic bowl 150 psig (10 bar)
Metal bowl 250 psig (17 bar)
Operating temperature:
Plastic bowl 14°F to 125°F (-10°C to 52°C)
Metal bowl 14°F to 150°F (-10°C to 65.5°C)
Port
Size Description ‡ Part Number Standard filtration: 5 micron
1/4" Poly Bowl, Manual Drain P31FB92EGMN Flow capacity*: 25 scfm (12 dm3/s, ANR)
Useful retention : †
0.4 US oz. (12 cm3)
1/4" Poly Bowl, Pulse Drain P31FB92EGBN
Weight: 0.24 lb (0.11 kg)
1/4" Metal Bowl, Manual Drain P31FB92EMMN
* Inlet pressure 91.3 psig (6.3 bar). Pressure drop 4.9 psig (0.34 bar).
1/4" Metal Bowl, Pulse Drain P31FB92EMBN †
Useful retention refers to volume below the quiet zone baffle.
‡
For polycarbonate bowl, see caution in Engineering Section A. Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)

Ordering Information:

P31FB 9 2 E G M N
Basic Series Thread Type Mounting
Global Modular Mini BSPP 1 N No Bracket
P31FB
Particulate Filter BSPT 2
Drain Type
NPT 9
M Manual Drain
Port Size B Pulse Drain
1/4 2
Bowl Type
Element G Poly Bowl with Bowl Guard
5µ Element E Metal Bowl without Sight
M
Gauge

Most popular.

For inventory, lead

Catalog 0760P 12 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Particulate Filters Air Preparation

Material Specifications Flow Charts

Body Aluminum
Body cap ABS P31FB 1/4" Filter
Plastic bowl Polycarbonate Primary Pressure - bar 1.6 4.0 6.3 10
Primary Pressure - psig 23.2 58 91.4 145
Metal bowl Aluminum 7 0.5

Bowl guard Nylon 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

Element retainer Acetal 5
0.3
4
Baffle Acetal
3 0.2
Filter element Sintered polyethylene
2
Seals Nitrile 0.1
1

0 0
Repair and Service Kits 0 5 10 15
Flow - (dm 3/s)
20 25 30
n
Plastic bowl / bowl guard, manual drain P31KB00BGM 0 10 20 30 40 50 60
Flow - (scfm)
Metal bowl / w/o sight gauge, manual drain P31KB00BMM
Plastic bowl / bowl guard, pulse drain P31KB00BGB
Metal bowl / w/o sight gauge, pulse drain P31KB00BMB
5µ particle filter element P31KA00ESE
C-bracket (fits to body) P31KA00MW
T-bracket with body connector P31KA00MT
Body connector P31KA00CB

1.58
(40)
1.58 .79
(40) (20)

.84
(21.4)

4.91 4.71
(124.8) (119.6)

5/32 (4mm)
I.D. tube Bowl
barb fitting 1.30 removal
(33) clearance
Inches (mm)

Manual Drain Pulse Drain

Catalog 0760P For inventory, lead

13 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Particulate Filters Air Preparation

P32 Particulate Filter – Compact

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting

1 2 1 2

Manual drain Auto drain

Port
Size Description ‡ Part Number Operating Information
1/4" Poly Bowl, Manual Drain P32FB92EGMN Supply pressure (max):
1/4" Poly Bowl, Auto Drain P32FB92EGAN Plastic bowl 150 psig (10 bar)
Metal bowl 250 psig (17 bar)
1/4" Metal Bowl, Manual Drain P32FB92ESMN Operating temperature:
1/4" Metal Bowl, Auto Drain P32FB92ESAN Plastic bowl -13°F to 125°F (-25°C to 52°C)
Metal bowl -13°F to 150°F (-25°C to 65.5°C)
3/8" Poly Bowl, Manual Drain P32FB93EGMN
Standard filtration: 5 micron
3/8" Poly Bowl, Auto Drain P32FB93EGAN Flow capacity*: 1/4 50 scfm (24 dm3/s, ANR)
3/8" Metal Bowl, Manual Drain P32FB93ESMN 3/8 78 scfm (37 dm3/s, ANR)
1/2 82 scfm (39 dm3/s, ANR)
3/8" Metal Bowl, Auto Drain P32FB93ESAN
Useful retention†: 1.7 US oz. (51 cm3)
1/2" Poly Bowl, Manual Drain P32FB94EGMN Weight: 0.62 lb (0.28 kg)
1/2" Poly Bowl, Auto Drain P32FB94EGAN * Inlet pressure 91.3 psig (6.3 bar). Pressure drop 4.9 psig (0.34 bar).
†
Useful retention refers to volume below the quiet zone baffle.
1/2" Metal Bowl, Manual Drain P32FB94ESMN
Air quality:
1/2" Metal Bowl, Auto Drain P32FB94ESAN Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
‡
For polycarbonate bowl, see caution in Engineering Section A.

Ordering Information:

P32FB 9 2 E G M N
Basic Series Thread Type Mounting
Global Modular Compact BSPP 1 N No Bracket
P32FB
Particulate Filter BSPT 2
Drain Type
NPT 9
M Manual Drain
Port Size A Auto Drain
1/4 2
3/8 3
Bowl Type
1/2 4 G Poly Bowl with Bowl Guard
Metal Bowl without Sight
Element M
Gauge
5µ Element E S Metal Bowl with Sight Gauge

Most popular.

For inventory, lead

Catalog 0760P 14 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Particulate Filters Air Preparation

Material Specifications Flow Charts

Body Aluminum
P32FB 1/4" Filter
Body cap ABS Primary Pressure - bar 2.5 6.3 10
Primary Pressure - psig 36.2 91.4 145
Plastic bowl Polycarbonate 7 0.5

Metal bowl Aluminum 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

Bowl guard Nylon 5
0.3
Deflector Polypropylene 4

Element retainer / Baffle Acetal 3 0.2

Filter element Sintered polyethylene 2

0.1
1
Seals Nitrile
0 0
Sight gauge Nylon 0 5 10 15 20 25 30 35 40
Flow - (dm 3/s)
n

0 20 40 60 80
Flow - (scfm)
Repair and Service Kits
Plastic bowl / bowl guard, manual drain P32KB00BGM P32FB 3/8" Filter
Primary Pressure - bar 2.5 6.3 10
Metal bowl / sight gauge, manual drain P32KB00BSM Primary Pressure - psig 36.2 91.4 145
0.5
Auto drain P32KA00DA 7

5µ particle filter element P32KA00ESE 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

5
L-bracket (fits to body) P32KA00ML
0.3
4
T-bracket (fits to body connector) P32KA00MB
3 0.2
T-bracket with body connector P32KA00MT
2
Body connector P32KA00CB 0.1
1

0 0
0 10 20 30 40 50 60 70
Flow - (dm 3/s)
n

0 20 40 60 80 100 120 140

Flow - (scfm)
2.36
(60)
2.36 1.18
(60) (30) P32FB 1/2" Filter
Primary Pressure - bar 2.5 6.3 10
1.04
Primary Pressure - psig 36.2 91.4 145
(26.3) 7 0.5

6 0.4
Pressure Drop - (psig)

Pressure Drop - (bar)

5
0.3
4

3 0.2
2
7.49 7.26 0.1
(190.3) (184.3) 1

0 0
0 10 20 30 40 50 60 70 80
Flow - (dm 3/s)
n

0 20 40 60 80 100 120 140 160

Flow - (scfm)

.18 (4.8mm)
I.D. tube
barb fitting
2.28 Bowl
(58) removal
clearance
Inches (mm)

Manual Drain Automatic Drain

Catalog 0760P For inventory, lead

15 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Particulate Filters Air Preparation

P33 Particulate Filter – Standard

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting

1 2 1 2

Manual drain Auto drain

Operating Information
Supply pressure (max):
Port Plastic bowl 150 psig (10 bar)
Size Description ‡
Part Number Metal bowl 250 psig (17 bar)
1/2" Poly Bowl, Manual Drain P33FA94EGMN Operating temperature:
Plastic bowl -13°F to 125°F (-25°C to 52°C)
1/2" Poly Bowl, Auto Drain P33FA94EGAN
Metal bowl -13°F to 150°F (-25°C to 65.5°C)
1/2" Metal Bowl, Manual Drain P33FA94ESMN Standard filtration: 5 micron
1/2" Metal Bowl, Auto Drain P33FA94ESAN Flow capacity*: 1/2 85 scfm (40 dm3/s, ANR)
3/4 102 scfm (48 dm3/s, ANR)
3/4" Poly Bowl, Manual Drain P33FA96EGMN
Useful retention†: 2.8 US oz. (85 cm3)
3/4" Poly Bowl, Auto Drain P33FA96EGAN
Weight: 1.01 lb (0.46 kg)
3/4" Metal Bowl, Manual Drain P33FA96ESMN * Inlet pressure 91.3 psig (6.3 bar). Pressure drop 4.9 psig (0.34 bar).
†
Useful retention refers to volume below the quiet zone baffle.
3/4" Metal Bowl, Auto Drain P33FA96ESAN
‡
For polycarbonate bowl, see caution in Engineering Section A. Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)

Ordering Information:

P33FA 9 6 E G M N
Basic Series Thread Type Mounting
Global Modular Standard BSPP 1 N No Bracket
P33FA
Particulate Filter BSPT 2
Drain Type
NPT 9
M Manual Drain
Port Size A Auto Drain
1/2 4
3/4 6
Bowl Type
G Poly Bowl with Bowl Guard
Element Metal Bowl without Sight
M
5µ Element E Gauge
S Metal Bowl with Sight Gauge

Most popular.

For inventory, lead

Catalog 0760P 16 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Particulate Filters Air Preparation

Material Specifications Flow Charts

Body Aluminum
P33FA 1/2" Filter
Body cap ABS Primary Pressure - bar 1.6 4.0 6.3 10
Primary Pressure - psig 23.2 58 91.4 145
Plastic bowl Polycarbonate 7 0.5

Metal bowl Aluminum 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

Bowl guard Nylon 5
0.3
4
Deflector Polypropylene
3 0.2
Element retainer / Baffle Acetal
2
Filter element Sintered polyethylene 0.1
1

Seals Nitrile 0 0
0 10 20 30 40 50 60 70
Sight gauge Nylon Flow - (dm 3/s)
n

0 20 40 60 80 100 120 140

Flow - (scfm)
Repair and Service Kits
Plastic bowl / bowl guard, manual drain P33KA00BGM P33FA 3/4" Filter
Primary Pressure - bar 1.6 4.0 6.3 10
Metal bowl / sight gauge, manual drain P33KA00BSM 0.5
Primary Pressure - psig 23.2 58 91.4 145
7
Auto drain P32KA00DA 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

5µ particle filter element P33KA00ESE 5
0.3
L-bracket (fits to body) P33KA00ML 4

3
T-bracket (fits to body connector) P32KA00MB 0.2
2
T-bracket with body connector P33KA00MT 0.1
1
Body connector P32KA00CB 0 0
0 10 20 30 40 50 60 70 80
Flow - (dm 3/s)
n

0 20 40 60 80 100 120 140 160

Flow - (scfm)

2.87
(73)
2.87 1.42
(73) (36)

1.02
(26)

8.39 8.15
(213) (207)

.18 (4.8mm)
I.D. tube Use 3/8" or
barb fitting (10mm) Flex
2.00 Bowl Tubing
(51) removal
clearance
Inches (mm)

Manual Drain Automatic Drain

Catalog 0760P For inventory, lead

17 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Coalescing and Adsorber Filters Air Preparation

P31 Coalescing and Adsorber Filters – Mini

• Integral 1/4" ports (NPT, BSPP & BSPT)
• Removes liquid aerosols and sub micron particles
• Oil free air for critical applications, such as air gauging,
pneumatic instrumentation and control
• Positive bayonet latch to ensure correct and safe fitting
• Adsorbing activated carbon element removes oil vapors and
most hydrocarbons

Note: To optimize the life of coalescing element, it is advisable to install a

P31F pre-filter with a 5 micron element upstream of the coalescing Operating Information
filter.
To optimize the life of an Adsorber it is advisable to install a P31 Supply pressure (max):
Coalescing Filter upstream of the Adsorber. Adsorber element Poly bowl 150 psig (10 bar)
should be replaced approximately every 1000 hours of service. Metal bowl 250 psig (17 bar)
Operating temperature:
Plastic bowl 14°F to 125°F (-10°C to 52°C)
Metal bowl 14°F to 150°F (-10°C to 65.5°C)
Standard filtration: 1.0 and 0.01 micron
Adsorber Max. oil carryover (ppm w/w)
0.003 @ 70°F (21°C)
Flow capacity*:
1.0 micron coalescing 12 scfm (5.5 dm3/s, ANR)
Port 0.01 micron coalescing 7.5 scfm (3.6 dm3/s, ANR)
Size Description ‡ Element Part Number Activated carbon adsorber 12.7 scfm (6 dm3/s, ANR)
1/4" Poly Bowl, Manual Drain 0.01 micron P31FB92CGMN Useful retention†: 0.4 US oz. (12 cm3)
1/4' Poly Bowl, Pulse Drain 0.01 micron P31FB92CGBN Weight: 0.24 lb (0.11 kg)
1/4" Metal Bowl, Manual Drain 0.01 micron P31FB92CMMN * Inlet pressure 91.3 psig (6.3 bar). Pressure drop 3 psig (0.2 bar),
saturated element.
1/4' Metal Bowl, Pulse Drain 0.01 micron P31FB92CMBN †
Useful retention refers to volume below the quiet zone baffle.
‡
For polycarbonate bowl, see caution in Engineering Section A.

Ordering Information:

P31FB 9 2 C G M N
Basic Series Thread Type Mounting
Global Modular Mini BSPP 1 N No Bracket
P31FB
Coalescing Filter BSPT 2
Drain Type
NPT 9
B Pulse Drain
Port Size M Manual Drain
1/4 2
Bowl Type
Element G Poly Bowl with Bowl Guard
0.01µ Element C Metal Bowl without Sight
1µ Element 9 M
Gauge
Adsorber A

Most popular.

For inventory, lead

Catalog 0760P 18 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Coalescing and Adsorber Filters Air Preparation

Material Specifications Flow Charts

Body Aluminum
P31FB - 1.0 micron flow
Body cap ABS
Primary Pressure - bar 1.6 4.0
Plastic bowl Polycarbonate Primary Pressure - psig 23.2 58
7 0.5
Metal bowl Aluminum
6 0.4 6.3

Pressure Drop - (psig)

Filter element Borosilicate cloth

Pressure Drop - (bar)

91.4
5
Adsorber element Activated carbon 0.3
4 10
Seals Nitrile 3 145
0.2
2 Saturated
Repair and Service Kits 1
0.1 Element
Flow
Plastic bowl / bowl guard, manual drain P31KB00BGM 0 0
0 1 2 3 4 5 6 7 8
Metal bowl / w/o sight gauge ,manual drain P31KB00BMM Flow - (dm 3/s)
n
Plastic bowl / bowl guard, pulse drain P31KB00BGB 0 5 10 15
Flow - (scfm)
Metal bowl / w/o sight gauge, pulse drain P31KB00BMB
1µ coalescing filter element P31KA00ES9
P31FB - 0.01 micron flow
0.01µ coalescing filter element P31KA00ESC
Primary Pressure - bar 1.6 4.0
Activated carbon adsorber filter element P31KA00ESA Primary Pressure - psig 23.2 58
7 0.5
C-bracket (fits to body) P31KA00MW
6
T-bracket with body connector P31KA00MT 0.4 6.3

Pressure Drop - (psig)

Pressure Drop - (bar)

5 91.4
Body connector P31KA00CB 0.3
4
10
3 0.2 145
2 Saturated
0.1 Element
1
Flow
0 0
0 1 2 3 4 5
Flow - (dm 3/s)
n

0 5 10
Flow - (scfm)

1.58
(40)
1.58 .79
(40) (20)

.84
(21.4)

4.91 4.71
(124.8) (119.6)

5/32 (4mm)
I.D. tube Bowl
barb fitting 1.30 removal
(33) clearance
Inches (mm)

Manual Drain Pulse Drain

Catalog 0760P For inventory, lead

19 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Coalescing and Adsorber Filters Air Preparation

P32 Coalescing and Adsorber Filters – Compact

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• Removes liquid aerosols and sub micron particles
• Oil free air for critical applications, such as air gauging, pneumatic
instrumentation and control
• Differential Pressure Indicator (DPI) standard on Coalescing Filters
• Positive bayonet latch to ensure correct & safe fitting
• Adsorbing activated carbon element removes oil vapors and most
hydrocarbons
Note: To optimize the life of coalescing element, it is advisable to install a P32F
pre-filter with a 5 micron element upstream of the coalescing filter.
To optimize the life of an Adsorber it is advisable to install a P32 Coalescing
Filter upstream of the Adsorber. Adsorber element should be replaced
approximately every 1000 hours of service.
Operating Information
Supply pressure (max):
Poly bowl 150 psig (10 bar)
Port Metal bowl w/ DPI 150 psig (10 bar)
Size Description ‡ Element Part Number Metal bowl w/o DPI 250 psig (17 bar)
1/4" Poly Bowl, Manual Drain 0.01 micron P32FB92DGMN Operating temperature:
1/4" Poly Bowl, Auto Drain 0.01 micron P32FB92DGAN Plastic bowl -13°F to 125°F (-25°C to 52°C)
Metal bowl -13°F to 150°F (-25°C to 65.5°C)
1/4" Metal Bowl, Manual Drain 0.01 micron P32FB92DSMN
Standard filtration: 1.0 and 0.01 micron
1/4" Metal Bowl, Auto Drain 0.01 micron P32FB92DSAN
Adsorber Max. oil carryover (ppm w/w)
3/8" Poly Bowl, Manual Drain 0.01 micron P32FB93DGMN 0.003 @ 70°F (21°C)
3/8" Poly Bowl, Auto Drain 0.01 micron P32FB93DGAN Flow capacity*:
3/8" Metal Bowl, Manual Drain 0.01 micron P32FB93DSMN 1.0 micron coalescing 53 scfm (25 dm3/s, ANR)
0.01 micron coalescing 36 scfm (17 dm3/s, ANR)
3/8' Metal Bowl, Auto Drain 0.01 micron P32FB93DSAN Activated carbon adsorber 85 scfm (40 dm3/s, ANR)
1/2" Poly Bowl, Manual Drain 0.01 micron P32FB94DGMN Useful retention†: 1.7 US oz. (51 cm3)
1/2" Poly Bowl, Auto Drain 0.01 micron P32FB94DGAN Weight: 0.71 lb (0.32 kg)
1/2" Metal Bowl, Manual Drain 0.01 micron P32FB94DSMN * Inlet pressure 91.3 psig (6.3 bar). Pressure drop 3 psig (0.2 bar),
1/2" Metal Bowl, Auto Drain 0.01 micron P32FB94DSAN saturated element.
†
Useful retention refers to volume below the quiet zone baffle.
‡
For polycarbonate bowl, see caution in Engineering Section A.

Ordering Information:

P32FB 9 2 D G M N
Basic Series Thread Type Mounting
Global Modular Compact BSPP 1 N No Bracket
P32FB
Coalescing Filter BSPT 2
Drain Type
NPT 9
M Manual Drain
Port Size A Auto Drain
1/4 2
3/8 3 Bowl Type
1/2 4 G Poly Bowl with Bowl Guard
Metal Bowl without Sight
Element M
Gauge
0.01µ Element C
S Metal Bowl with Sight Gauge
0.01µ Element with DPI D
1µ Element 9
1µ Element with DPI Q
Adsorber A

Most popular.

For inventory, lead

Catalog 0760P 20 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Coalescing and Adsorber Filters Air Preparation

Material Specifications Flow Charts

Body Aluminum
P32FB - 1.0 micron flow
Body cap ABS
Primary Pressure - bar 2.5 6.3 10
Plastic bowl Polycarbonate Primary Pressure - psig 36.3 91.4 145
7 0.5
Metal bowl Aluminum
6 0.4

Pressure Drop - (psig)

Filter element Borosilicate cloth

Pressure Drop - (bar)

5
Adsorber Activated carbon 4
0.3

Seals Nitrile 3 0.2

Sight gauge Nylon 2 Saturated
0.1 Element
1 Flow

0 0
Repair and Service Kits 0 10 20 30 40
Flow - (dm 3/s)
50 60 70
n
Plastic bowl / bowl guard, manual drain P32KB00BGM 0 20 40 60 80 100 120 140
Flow - (scfm)
Metal bowl / sight gauge, manual drain P32KB00BSM
Auto drain P32KA00DA
1µ coalescing filter element P32KA00ES9 P32FB - 0.01 micron flow
0.01µ coalescing filter element P32KA00ESC Primary Pressure - bar 6.3 10
Primary Pressure - psig 91.4 145
Activated carbon adsorber filter element P32KA00ESA 7 0.5 2.5
36.3
L-bracket (fits to body) P32KA00ML 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

T-bracket (fits to body connector) P32KA00MB 5
0.3
T-bracket with body connector P32KA00MT 4

3 0.2
Body connector P32KA00CB
2 Saturated
Differential pressure indicator (replacement) P32KA00RQ 0.1 Element
1 Flow

0 0
0 10 20 30 40 50
Flow - (dm 3/s)
n

0 20 40 60 80 100
Flow - (scfm)
2.36
(60)
2.36 1.18
(60) (30)

1.90
(48.3)

8.36 8.12
(212.3) (206.3)

.18 (4.8mm)
I.D. tube
barb fitting Bowl
2.28 removal
(58) clearance

Inches (mm)

Manual Drain Automatic Drain

Catalog 0760P For inventory, lead

21 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Coalescing and Adsorber Filters Air Preparation

P33 Coalescing and Adsorber Filters – Standard

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• Removes liquid aerosols and sub micron particles
• Oil free air for critical applications, such as air gauging, pneumatic
instrumentation and control
• Differential Pressure Indicator (DPI) standard on Coalescing Filters
• Positive bayonet latch to ensure correct & safe fitting
• Adsorbing activated carbon element removes oil vapors
and most hydrocarbons
Note: To optimize the life of coalescing element, it is advisable to install a
P33F pre-filter with a 5 micron element upstream of the coalescing
filter.
To optimize the life of an Adsorber it is advisable to install a P33
Coalescing Filter upstream of the Adsorber. Adsorber element Operating Information
should be replaced approximately every 1000 hours
Supply pressure (max):
of service.
Poly bowl 150 psig (10 bar)
Metal bowl w/ DPI 150 psig (10 bar)
Metal bowl w/o DPI 250 psig (17 bar)
Operating temperature:
Plastic bowl -13°F to 125°F (-25°C to 52°C)
Metal bowl -13°F to 150°F (-25°C to 65.6°C)
Port
Size Description ‡ Element Part Number Standard filtration: 1.0 and 0.01 micron
1/2" Poly Bowl, Manual Drain 0.01 micron P33FA94DGMN Adsorber Max. oil carryover (ppm w/w)
0.003 @ 70°F (21°C)
1/2" Poly Bowl, Auto Drain 0.01 micron P33FA94DGAN
Flow capacity*:
1/2" Metal Bowl, Manual Drain 0.01 micron P33FA94DSMN 1.0 micron coalescing 68 scfm (32 dm3/s, ANR)
1/2" Metal Bowl, Auto Drain 0.01 micron P33FA94DSAN 0.01 micron coalescing 42 scfm (20 dm3/s, ANR)
Activated carbon adsorber 72 scfm (34 dm3/s, ANR)
3/4" Poly Bowl, Manual Drain 0.01 micron P33FA96DGMN
Useful retention†: 2.8 US oz. (85 cm3)
3/4" Poly Bowl, Auto Drain 0.01 micron P33FA96DGAN
Weight: 1.10 lb (0.50 kg)
3/4" Metal Bowl, Manual Drain 0.01 micron P33FA96DSMN
* Inlet pressure 91.3 psig (6.3 bar). Pressure drop 3 psig (0.2 bar),
3/4" Metal Bowl, Auto Drain 0.01 micron P33FA96DSAN saturated element.
‡
For polycarbonate bowl, see caution in Engineering Section A. †
Useful retention refers to volume below the quiet zone baffle.

Ordering Information:

P33FA 9 6 D G M N
Basic Series Thread Type Mounting
Global Modular Standard BSPP 1 N No Bracket
P33FA
Coalescing Filter BSPT 2
Drain Type
NPT 9
M Manual Drain
Port Size A Auto Drain
1/2 4
Bowl Type
3/4 6
G Poly Bowl with Bowl Guard
Element Metal Bowl without Sight
M
0.01µ Element C Gauge
0.01µ Element with DPI D S Metal Bowl with Sight Gauge
1µ Element 9
1µ Element with DPI Q
Adsorber A

Most popular.

For inventory, lead

Catalog 0760P 22 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Coalescing and Adsorber Filters Air Preparation

Material Specifications Flow Charts

Body Aluminum
P33FA - 1.0 micron flow
Body cap ABS
Primary Pressure - bar 2.0 4.0 6.3
Plastic bowl Polycarbonate Primary Pressure - psig 29 58 91.4
7 0.5
Metal bowl Aluminum
6 0.4

Pressure Drop - (psig)

Filter element Borosilicate cloth

Pressure Drop - (bar)

5
Adsorber Activated carbon 4
0.3

Seals Nitrile 3 0.2

Sight gauge Nylon 2 Saturated
0.1 Element
1 Flow

Repair and Service Kits 0 0

0 10 20 30 40 50
Flow - (dm 3/s)
Plastic bowl / bowl guard, manual drain P33KA00BGM n

0 20 40 60 80 100
Metal bowl / sight gauge, manual drain P33KA00BSM Flow - (scfm)

Auto drain P32KA00DA

1µ coalescing filter element P33KA00ES9 P33FA - 0.01 micron flow
0.01µ coalescing filter element P33KA00ESC Primary Pressure - bar 2.0 4.0 6.3
Primary Pressure - psig 29 58 91.4
0.5
Activated carbon adsorber filter element P33KA00ESA 7

L-bracket (fits to body) P33KA00ML 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

5
T-bracket (fits to body connector) P32KA00MB
0.3
4
T-bracket with body connector P32KA00MT
3 0.2
Body connector P32KA00CB
2 Saturated
Differential pressure indicator (replacement) P32KA00RQ 0.1 Element
1 Flow
0 0
0 10 20 30 40
Flow - (dm 3/s)
n
0 20 40 60 80
Flow - (scfm)
2.87 2.87
(73) (73)
1.42
DPI
(36)

1.02
(26)

9.25 9.02
(235) (229)

.18 (4.8mm)
I.D. tube Use 3/8" or
barb fitting 10mm Flex
Bowl
2.00 Tubing
removal
(51) clearance
Inches (mm)

Manual Drain Automatic Drain

Catalog 0760P For inventory, lead

23 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Regulators Air Preparation

P31 Regulators – Mini

• Integral 1/4" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation.
• Relieving & non-relieving types
• Non-rising knob

3
Operating Information
1 2
1 2 Flow capacity*: 1/4 73 scfm (34 dm3/s, ANR)
Operating temperature : †
-4°F to 150°F (-20°C to 65.5°C)
Self relieving regulator Non-relieving regulator Supply pressure (max): 300 psig (20 bar)
with gauge Adjusting range pressure: 30 psig (0-2 bar)
60 psig (0-4 bar)
125 psig (0-8 bar)
232 psig (0-16 bar)
Weight: 0.37 lb (0.17 kg)
Port Description * Inlet pressure 145 psig (10 bar). Secondary pressure 100 psig (6.9 bar)
Size (relieving) Gauge Part Number and 14.5 psig (1 bar) pressure drop.
† Units with square gauges: 5°F to 150°F (-15°C to 65.5°C)
1/4" 125 psig (8 bar) Square P31RB92BN5P
Gauge supplied with every part. Gauge can be installed on the front or back
of the regulator. If no gauge is installed, both seal screws must be installed.

Ordering Information:

P31RB 9 2 B N 5 P
Mounting
Basic Series Thread Type P Plastic Panel Mount Nut
Global Modular BSPP 1
P31RB
Mini Regulator BSPT 2 Adjustment Range
NPT 9 With Square Gauge
Port Size psig bar MPa
1/4 2 1 = 30* V = 2* 2 = 0.2*
3 = 60 S=4 4 = 0.4
Relief
5 = 125 T=8 6 = 0.8
Relieving B
7 = 232 W = 16 8 = 1.6
Non-Relieving N
* Regulator comes with gauge respective to the
Reverse Flow - Relieving R adjustment range available.

Adjustment
N Non-rising Knob

Most popular.

For inventory, lead

Catalog 0760P 24 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Regulators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P31RB 1/4" Regulator
Adjustment knob Acetal
Bonnet Glass-filled nlyon
Diaphragm assembly Stainless steel/Nitrile
Valve assembly Acetal/Nitrile
Springs Steel
Seals Nitrile
Panel nut Acetal
Bottom Cap Glass-filled nylon

Repair and Service Kits

Panel mount nut - aluminum P31KA00MM
Panel mount nut - plastic P31KA00MP
Angle bracket (attaches via panel nut) P31KB00MR
C-bracket (fits to body) P31KA00MW Gauges (*see note below)
T-bracket with body connector P31KA00MT Square flush mount 0-60 psig P31KA060XB
Body connector P31KA00CB gauge 0-160 psig P31KA160XB
0-290 psig P31KA290XB
0-4 bar P31KA04BXB
0-11 bar P31KA11BXB
0-20 bar P31KA20BXB
0-0.4 MPa P31KA04MXB
0-1.1 MPa P31KA11MXB
0-2.0 MPa P31KA20MXB
Square flush 0-4 bar K4511SCR04B
mount gauge 0-11 bar K4511SCR11B
0-60 psig K4511SCR060
0-160 psig K4511SCR160

Square with adapter 0-4 bar P6G-PR10040

kit 0-11 bar P6G-PR10110
0-60 psig P6G-PR90060
0-160 psig P6G-PR90160

1.00” Round 1/8” 0-60 psig / 1-4 bar K4510N18060

NOTE: 1.20 in. (30mm) hole required for center back mount 0-160 psig / 0-11 bar K4510N18160
panel nut mounting.

40mm Round 0-30 psig / 0-2 bar K4515N18030

1/8” center back 0-60 psig / 0-4 bar K4515N18060
mount (not for use 0-160 psig / 0-11bar K4515N18160
WARNING with common port
regulators)
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
For best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob *For P31 Regulators with date code after November 2023 (4423 Date Code),
is not a limiting device. This is a common characteristic of most industrial please use these part numbers when ordering a replacement gauge.
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Catalog 0760P For inventory, lead

25 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Common P1 Regulators Air Preparation

P31 Common P1 Regulators – Mini

P2 P2 P2
P2
• Manifold style regulator with line pressure on both sides
• Pressure output is at front or rear P1

• Inlet port 1/4" (NPT, BSPP & BSPT)

P1
• Working port 1/8"
• Robust construction
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation
• Relieving & non-relieving types
• Non-rising knob

P1

P2 P2 P2 P2

3 1 2 Operating Information
1 2
Flow capacity*:
1/4 64 scfm (31 dm3/s, ANR)
Self relieving regulator Non-relieving regulator Operating temperature: -4°F to 150°F (-20°C to 65.5°C)
with gauge
Supply pressure (max): 300 psig (20 bar)
Adjusting range pressure: 30 psig (0-2 bar)
60 psig (0-4 bar)
125 psig (0-8 bar)
Port Description 232 psig (0-16 bar)
Size (relieving) Gauge Part Number P1 port size (inlet/outlet) 1/4 NPT, BSPP, BSPT

1/4" 125 psig (8 bar) Square P31HB92BN5P P2 regulated ports (2 ea.) 1/8 NPT, BSPP, BSPT
Weight: 0.66 lb (0.30 kg)
* Inlet pressure 145 psig (10 bar). Secondary pressure 100 psig (6.9 bar) and
14.5 psig (1 bar) pressure drop.

Gauge supplied with every part. Gauge can be installed on the front or back
of the regulator. If no gauge is installed, both seal screws must be installed.

Ordering Information:

P31HB 9 2 B N 5 P
Basic Series Thread Type Mounting
Global Modular Mini BSPP 1 P Plastic Panel Mount Nut
P31HB
Common Regulator BSPT 2
NPT 9 Adjustment Range
Port Size † With Square Gauge
1/4 2 psig Bar MPa
† Working port 1/8" 1 = 30* V = 2* 2 = 0.2*
3 = 60 S=4 4 = 0.4
Relief
5 = 125 T=8 6 = 0.8
Relieving B
7 = 232 W = 16 8 = 1.6
Non-Relieving N
* Regulator comes with gauge respective
Reverse Flow - Relieving R to the adjustment range available.
Adjustment
N Non-Rising Knob

Most popular.

For inventory, lead

Catalog 0760P 26 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Common P1 Regulators Air Preparation

Materials of Construction Flow Charts

Body Aluminum
P31HB 1/4" Common Regulator
Adjustment knob Acetal
Bonnet Glass-filled nylon
Diaphragm assembly Stainless steel/Nitrile
Valve assembly Acetal/Nitrile
Bottom cap Glass-filled nylon

Repair and Service Kits

Panel mount nut - aluminum P31KA00MM
Panel mount nut - plastic P31KA00MP
Angle bracket (attaches via panel nut) P31KB00MR
T-bracket with body connector P31KA00MT
Body connector P31KA00CB

Gauges (*see note below)

Square flush mount 0-60 psig P31KA060XB
gauge 0-160 psig P31KA160XB
0-290 psig P31KA290XB
0-4 bar P31KA04BXB
0-11 bar P31KA11BXB
0-20 bar P31KA20BXB
0-0.4 MPa P31KA04MXB
0-1.1 MPa P31KA11MXB
0-2.0 MPa P31KA20MXB

Square flush 0-4 bar K4511SCR04B

mount gauge 0-11 bar K4511SCR11B
0-60 psig K4511SCR060
0-160 psig K4511SCR160

Square with adapter 0-4 bar P6G-PR10040

kit 0-11 bar P6G-PR10110
NOTE: 1.20 in. (30mm) hole required for 0-60 psig P6G-PR90060
panel nut mounting. 0-160 psig P6G-PR90160

1.00” Round 1/8” 0-60 psig / 1-4 bar K4510N18060

center back mount 0-160 psig / 0-11 bar K4510N18160

WARNING
40mm Round 0-30 psig / 0-2 bar K4515N18030
Product rupture can cause serious injury. 1/8” center back 0-60 psig / 0-4 bar K4515N18060
Do not connect regulator to bottled gas.
mount (not for use 0-160 psig / 0-11bar K4515N18160
Do not exceed Maximum primary pressure rating.
with common port
regulators)
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range. For best performance, regulated pressure should always be set by increasing
Pressure adjustment beyond this range is also possible because the knob the pressure up to the desired setting.
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
*For P31 Regulators with date code after November 2023 (4423 Date Code),
please use these part numbers when ordering a replacement gauge.

Catalog 0760P For inventory, lead

27 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Regulators Air Preparation

P32 Regulators – Compact

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation
• Relieving & non-relieving types
• Regulator will reverse flow as standard
• Non-rising knob

3 1 2
1 2

Self relieving regulator Non-relieving regulator Operating Information

with gauge Flow capacity*:
1/4 179 scfm (84 dm3/s, ANR)
3/8, 1/2 201 scfm (94 dm3/s, ANR)
Operating temperature: -13°F to 150°F (-25°C to 65.5°C)
Port Description
Size (relieving) Gauge Part Number Supply pressure (max): 300 psig (20 bar)

1/4" 125 psig (8 bar) None P32RB92BNNP Adjusting range pressure: 30 psig (0-2 bar)
60 psig (0-4 bar)
1/4" 125 psig (8 bar) Round P32RB92BNGP 125 psig (0-8 bar)
250 psig (0-17 bar)
3/8" 125 psig (8 bar) None P32RB93BNNP
Gauge port (2 each) 1/4 NPT, BSPP, BSPT
3/8" 125 psig (8 bar) Round P32RB93BNGP
Weight: 1.24 lb (0.56 kg)
1/2" 125 psig (8 bar) None P32RB94BNNP * Inlet pressure 145 psig (10 bar). Secondary pressure 80.0 psig (5.5 bar)
1/2" 125 psig (8 bar) Round P32RB94BNGP

Ordering Information:

P32RB 9 2 B N G P
Basic Series Thread Type Mounting
Global Modular BSPP 1 P Plastic Panel Mount Nut
P32RB
Compact Regulator BSPT 2 Adjustment Range
NPT 9 With Round Gauge
Port Size Z 30 psig; 2 bar; 0.2 MPa
1/4 2 M 60 psig; 4 bar; 0.4 MPa
3/8 3 G 125 psig; 8 bar; 0.8 MPa
1/2 4 J 250 psig; 17 bar; 1.7 MPa
Without Gauge
Relief
Y 30 psig; 2 bar; 0.2 MPa
Relieving B
L 60 psig; 4 bar; 0.4 MPa
Non-Relieving N
N 125 psig; 8 bar; 0.8 MPa
Adjustment H 250 psig; 17 bar; 1.7 MPa
Non-Rising * Regulator comes with gauge
N
Knob respective to the adjustment range
selected.

Most popular.

For inventory, lead

Catalog 0760P 28 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Regulators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P32RB 1/4" Regulator
Adjustment knob Acetal
Bonnet Glass-filled nylon
Diaphragm assembly Nitrile / Stainless steel
Valve assembly Acetal / Nitrile
Springs Steel, stainless steel
Seals Nitrile
Panel nut Acetal

Repair and Service Kits

Panel mount nut - aluminum P32KA00MM
P32RB 3/8" Regulator
Panel mount nut - plastic P32KA00MP
Angle bracket (attaches via panel nut) P32KB00MR
T-bracket with body connector P32KA00MT
T-bracket P32KA00MB
Body connector P32KA00CB

WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas. P32RB 1/2" Regulator
Do not exceed Maximum primary pressure rating.

CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Gauges
Square with 0-4 bar P6G-PR10040
adapter kit
0-11 bar P6G-PR10110
0-60 psig P6G-PR90060
0-160 psig P6G-PR90160
50mm (2") round 0-30 psig / 0-2 bar K4520N14030
1/4" center back
0-60 psig / 0-4 bar K4520N14060
mount
0-160 psig / 0-11 bar K4520N14160
0-300 psig / 0-20 bar K4520N14300
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

NOTE: 1.90 in. (48mm) hole required

for panel nut mounting.

Catalog 0760P For inventory, lead

29 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Common P1 Precision Regulator Air Preparation

P32 Common - P1 Regulator – Compact

• Manifold style regulator with line pressure on both sides.
• Pressure output is at front or rear.
• Inlet ports 1/4", 3/8" or 1/2" (NPT, BSPP & BSPT) P2
• Working port 1/4"
• Robust construction P1

• Secondary pressure ranges

• Secondary aspiration plus balanced poppet provides quick P1
response and accurate pressure regulation
• Relieving & non-relieving types
• Regulator will reverse flow as standard
• Non-rising knob

P1

P2 P2 P2 P2
3 1 2
1 2 Operating Information
Flow capacity*:
Self relieving regulator Non-relieving regulator 1/4, 3/8, 1/2 94 scfm (44 dm3/s, ANR)
with gauge Operating temperature: -25°C to 65.5°C (-13°F to 150°F)
Supply pressure (max): 300 psig (20 bar)
Adjusting range pressure: 0 to 30 psig (0 to 2 bar)
0 to 60 psig (0 to 4 bar)
Port Description 0 to 125 psig (0 to 8 bar)
Size (relieving) Gauge Part Number 0 to 232 psig (0 to 16 bar)
1/4" 125 psig (8 bar) None P32HB92BNNP Gauge port (2 each): 1/4 NPT, BSPP, BSPT

3/8" 125 psig (8 bar) None P32HB93BNNP Weight: 1.21 lb (0.55 kg)
* Inlet pressure 145 psig (10 bar). Secondary pressure 80.0 psig (5.5 bar)
1/2" 125 psig (8 bar) None P32HB94BNNP and 14.5 psig (1 bar) pressure drop.

Ordering Information:

P32HB 9 2 B N N P
Basic Series Thread Type Mounting
Global Modular BSPP 1 P Plastic Panel Mount Nut
P32HB
Compact Regulator BSPT 2
Adjustment Range
NPT 9
With Round Gauge
Port Size † Z 30 psig; 2 bar; 0.2 MPa
1/4 2 M 60 psig; 4 bar; 0.4 MPa
3/8 3 G 125 psig; 8 bar; 0.8 MPa
1/2 4 J 250 psig; 17 bar; 1.7 MPa
† Working port 1/4". Without Gauge
Relief Y 30 psig; 2 bar; 0.2 MPa
Relieving B L 60 psig; 4 bar; 0.4 MPa
Non-Relieving N N 125 psig; 8 bar; 0.8 MPa
Adjustment H 250 psig; 17 bar; 1.7 MPa
* Regulator comes with gauge respective to the
N Non-Rising Knob
adjustment range selected.

Most popular.

For inventory, lead

Catalog 0760P 30 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Common P1 Precision Regulator Air Preparation

Material Specifications Flow Charts

Body Aluminum
P32HB Common Port Regulator
Adjustment knob Acetal
Bonnet Glass-filled nylon
Diaphragm assembly Nitrile / Stainless steel
Valve assembly Acetal / nitrile
Springs Steel, stainless steel
Seals Nitrile
Panel nut Acetal

Repair and Service Kits

Panel mount nut - aluminum P32KA00MM
Panel mount nut - plastic P32KA00MP
Angle bracket (attaches via panel nut) P32KB00MR
T-bracket with body connector P32KA00MT WARNING
T-bracket P32KA00MB Product rupture can cause serious injury.
Body connector P32KA00CB Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Gauges
Square with 0-4 bar P6G-PR10040
adapter kit
0-11 bar P6G-PR10110
0-60 psig P6G-PR90060
0-160 psig P6G-PR90160
50mm (2") round 0-30 psig / 0-2 bar K4520N14030
1/4" center back
0-60 psig / 0-4 bar K4520N14060
mount
0-160 psig / 0-11 bar K4520N14160
0-300 psig / 0-20 bar K4520N14300
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

NOTE: 1.90 in. (48mm) hole required for

panel nut mounting.

Catalog 0760P For inventory, lead

31 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Regulators Air Preparation

P33 Regulators – Standard

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation
• Relieving & non-relieving types
• Non-rising knob

3 1 2
1 2
Operating Information
Self relieving regulator Non-relieving regulator Flow capacity*:
with gauge 1/2, 3/4 233 scfm (110 dm3/s, ANR)
Operating temperature: -13°F to 150°F (-25°C to 65.5°C)
Supply pressure (max): 300 psig (20 bar)
Adjusting range pressure: 0 to 30 psig (0 to 2 bar)
Port Description 0 to 60 psig (0 to 4 bar)
Size (relieving) Gauge Part Number 0 to 125 psig (0 to 8 bar)
0 to 250 psig (0 to 17 bar)
1/2" 125 psig (8 bar) None P33RA94BNNP
Gauge port (2 each): 1/4 NPT, BSPP, BSPT
1/2" 125 psig (8 bar) Round P33RA94BNGP
Weight: 1.37 lb (0.62 kg)
3/4" 125 psig (8 bar) None P33RA96BNNP * Inlet pressure 145 psig (10 bar). Secondary pressure 91.3 psig (6.3 bar)
3/4" 125 psig (8 bar) Round P33RA96BNGP and 14.5 psig (1 bar) pressure drop.

Ordering Information:

P33RA 9 6 B N G P
Basic Series Thread Type Mounting
Global Modular BSPP 1 P Plastic Panel Mount Nut
P33RA
Standard Regulator BSPT 2
NPT 9 Adjustment Range
With Round Gauge
Port Size
Z 30 psig; 2 bar; 0.2 MPa
1/2 4
M 60 psig; 4 bar; 0.4 MPa
3/4 6
G 125 psig; 8 bar; 0.8 MPa
Relief J 250 psig; 17 bar; 1.7 MPa
Relieving B Without Gauge
Non-Relieving N Y 30 psig; 2 bar; 0.2 MPa
Reverse Flow- R L 60 psig; 4 bar; 0.4 MPa
Relieving N 125 psig; 8 bar; 0.8 MPa
H 250 psig; 17 bar; 1.7 MPa
Adjustment
Non-Rising Knob N

Most popular.

For inventory, lead

Catalog 0760P 32 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Regulators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P33RA 1/2" Regulator
Adjustment knob Acetal
Inlet Pressure - 10 bar (145 psig)
Body cap ABS 140
10
9
Bonnet Glass-filled nylon 120

Secondary Pressure - (psig)

Secondary Pressure - (bar)

8
8.0 bar
Diaphragm assembly Nitrile / zinc 100 7
116 psig
6
Valve assembly Brass/nitrile 80
5
6.3 bar
91.4 psig
60
Springs Steel/Stainless steel 4
40 3
Seals Nitrile 2
20 2.5 bar 4.0 bar
Panel nut Acetal 1 36.3 psig 58 psig
0 0
0 20 40 60 80 100 120 140
Flow - (dm 3/s)
n

0 40 80 120 160 200 240 280

Flow - (scfm)
Repair and Service Kits
Diaphragm repair kit - relieving P33KA00RB
P33RA 3/4" Regulator
Diaphragm repair kit - non-relieving P33KA00RC
Inlet Pressure - 10 bar (145 psig)
10
Panel mount nut - aluminum P33KA00MM 140
9
Panel mount nut - plastic P33KA00MP 120

Secondary Pressure - (psig)

Secondary Pressure - (bar)

8
7 8.0 bar
Angle bracket (attaches via panel nut) P33KA00MR 100
116 psig
6
80
T-bracket with body connector P32KA00MT 5
60 6.3 bar
4
T-bracket P32KA00MB 91.4 psig
40 3
Body connector P32KA00CB 2 4.0 bar
20 2.5 bar
1 58 psig
36.3 psig
0 0
0 20 40 60 80 100 120 140 160
Flow - (dm 3/s)
WARNING 0 40 80 120 160 200
n

240 280 300 340

Flow - (scfm)
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

4.27 Round
(108) Gauge
2.87
Gauges
(73) 50mm (2") round 0-30 psig / 0-2 bar K4520N14030
2.87 1.44
(73) (37) 1/4" center back
0-60 psig / 0-4 bar K4520N14060
mount
0-160 psig / 0-11 bar K4520N14160
44
(1.73) 0-300 psig / 0-20 bar K4520N14300
3.30 For best performance, regulated pressure should always be set by increasing the
(83.8)
pressure up to the desired setting.

5.87
(149)

Inches (mm)

NOTE: 2.40 in. (61mm) hole required

for panel nut mounting.

Catalog 0760P For inventory, lead

33 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

P31P & P32P Proportional Regulators

• Very fast response times
• Accurate output pressure
• Parameter settings
• Selectable I/O parameters
• Quick, full flow exhaust
• LED display indicates output pressure
• No air consumption in steady state
• Multiple mounting options
• Protection to IP65

P31P Series P32P Series

Bottom exhaust Bottom exhaust

Operating Information
Flow capacity*: P31P 40 scfm (19 dm3/s, ANR)
P32P 120 scfm (57 dm3/s, ANR)
Temperature range: 32°F to 122°F (0°C to 50°C)
Supply pressure (max):
2 bar unit 36.3 psig (2.5 bar)
10 bar unit 152 psig (10.5 bar)
Operating pressure (min): P2 pressure + 7.3 psig (0.5 bar)
Working medium: Compressed air or inert gasses,
filtered to 40µ
Pressure range: 0 to 30 psig (0 to 2 bar)
Port 0 to 145 psig (0 to 10 bar)
Size Description Part Number
Weight: P31P 0.64 lb (0.291 kg)
1/4" 145 psig (0-10 bar), NC 0-10V P31PA92AD2VD1A P32P 1.42 lb (0.645 kg)
* Inlet pressure 91.3 psig (6.3 bar), inlet pressure and 4.9 psig (0.34 bar) pressure
1/2" 145 psig (0-10 bar), NC 0-10V P32PA94AD2VD1A drop.

Ordering Information:

P31PA 9 2 A D 2 V D 1 A
Body Size Thread Type Power Control Signal Input Connector
Global Modular Mini (1/4") P31PA BSPP 1 Supply V 0-10V ‡ 1 M12 (4-pin)
Global Modular Compact BSPT 2 2 24 volts ‡ Factory setting is
P32PA Output Signal
(1/2") NPT 9 0-10 V control signal.
Pressure Range 4-20 mA control D Digital, PNP
Port Size Z 0 - 29 psig (0 - 2 bar) signal available
via parameter 4 on P PNP or 0-10V
Global Modular Mini (1/4") 2 D 0 - 145 psig (0 - 10 bar)
keypad. N NPN or 0-10V
Global Modular Compact (1/2") 4 M 4-20mA Fixed
D) Digital PNP output only, no analog
Version
output selectable
Bottom Ported Exhaust (NC) A P) Digital PNP and analogue 0-10V
outputs selectable, by means of
Bottom Ported Forced Exhaust (NO) † E
parameter 6. (Factory default 0-10V)
† When the supply voltage is lost the unit will N) Digital NPN and analog 0-10 V outputs
automatically exhaust the regulated pressure selectable by means of parameter 6.
to 0 bar (atmospheric pressure) Factory default 0-10V)
M) Analog 4-20mA output only.
Note: On all analog outputs the F.S.
value can be adjusted by means of
parameter 8.
Most popular.

For inventory, lead

Catalog 0760P 34 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

Technical Information Flow Charts

Accuracy P31P Regulator 1/4" Ports
+/- 1.0% of F.S.* Inlet Pressure - 10 bar (145 psig)
10
140
* Full scale (F.S.) - For 2 bar (29 psig) versions this will be 2 bar (29 psig), 9
120

Secondary Pressure - (psig)

for the 10 bar (145 psig) version full scale will be 10 bar (145 psig).

Secondary Pressure - (bar)

8
100 7
6
80
Air consumption 60
5
4
No consumption in stable regulated situation. 40 3
2
20
1

Display 0 0
0 5 10 15 20 25 30 35
Flow - (dm 3/s)
The regulator is provided with a digital display, indicating the n

output pressure, either in bar or psig. 0 10 20 30 40

Flow - (scfm)
50 60 70

The factory setting is as indicated on the label, can be changed

through to software at all times (parameter 14) P32P Regulator 1/2" Ports
Inlet Pressure - 10 bar (145 psig)
10
140
9
120
Supply voltage

Secondary Pressure - (psig)

Secondary Pressure - (bar)

8
100 7
24 VDC +/- 10% 80
6
5
60 4
3
Power consumption 40
2
20
Max. 1.1W with unloaded signal outputs 1
0 0
0 10 20 30 40 50 60 70 80 90 100
Flow - (dm 3/s)
n

Control signals 0 20 40 60 80 100 120

Flow - (scfm)
140 160 180 200

The electronic pressure regulator can be externally controlled

through an analogue control signal of either 0-10V or 4-20mA.
(parameter 4). Degree of protection: IP65
EU conformity
Output signals CE: standard
As soon as the output pressure is within the signal band a signal EMC: according to directive 89/336/EEC
is given of 24VDC, PNP Ri = 1 kOhm This pressure regulator is in accordance with:
Outside the signal band this connection is 0V. EN 61000-6-1:2001 EN 61000-6-2:2001
EN 61000-6-3:2001 EN 61000-6-4:2001

Connections
(In case of output signal (Option D) Mounting position
Central M12 connector 4-pole Preferably vertical, with the cable gland on top.
The electrical connections are as follows:
Materials: P31P & P32P
Magnet core Steel
Pin No. Function Color Solenoid valve poppet FPM
1 24 V Supply Brown Solenoid valve housing Techno polymer
0 to 10 V Control Signal Ri = 100k W Regulator body (P31P & P32P versions) Aluminum
2 White
4 to 20mA Control Signal Ri = 500 W Regulator top housing Nylon
3 0 V (GND) Supply & Set Point Ground Blue Valve head Brass & NBR
4 24 V Alarm Output Signal Black Remaining seals NBR

Catalog 0760P For inventory, lead

35 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

How to change parameters – How to Videos available at www.parker.com/pneu/propreg

Pressing the Accept key “acc” for more than 3 seconds, will When the unit is initially powered up allow approximately
activate parameter change mode. The user can then select the 10 seconds for the unit to “boot-up” before changing parameter
parameters by pressing up or down key (display will show Pxx). settings.
When parameter number is correct, pressing accept again will Only parameter numbers 0, 4, 6, 8, 9, 14, 18, 19, 20, 12, 13 and 21
enter parameter number (display will show parameter value). are accessible to edit. All other parameters are fixed.
Pressing the up or down key will change the parameter itself Manual mode:
(display will flash indicating parameter editing mode). Pressing When keys DOWN and UP are pressed during startup,
the accept key will accept the new parameter value (all digits will (connecting to the 24V power supply) manual mode is activated.
flash whilst being accepted). This means that the user is able to in/decrease the output
After releasing all keys, the next parameter number will be pressure of the regulator, by pressing the UP or DOWN key.
presented on the display (you may step to the next parameter). During this action the display will blink, indicating that the
When no key is pressed, after 3 seconds the display will show the manual mode is activated. After powering up again, the unit will
actual output pressure. revert back to normal mode.

Back to Factory Setting

After start up. (Power is on)
Entering this value in parameter 0 will store the calibrated factory data into the working parameters.
(Default calibration data is used)

Parameter Number 0 – Reset Back to Factory Settings

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads

Flashing Decimal Flashing Decimal Flashing

Edits parameter.
3 = standard
factory settings.
Description If other than 3,
Accesses use Up or Down Accepts and saves
changeable Accesses Displays current Arrow and new parameter Sequences to next
parameters. parameter no. 0. parameter value. accept 3 setting. parameter.

Set Control Signal

The unit is factory set for 0-10 V control signal. If 4-20 mA control signal is required, change parameter 4.

Parameter Number 4 – Set Control Signal in Volts or Milliamps

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads

Flashing Decimal Flashing Decimal Flashing

Displays current
Accesses parameter value. Accepts and saves
Description changeable Accesses 1=V new parameter Sequences to next
parameters. parameter no. 4. 0 = mA Edits parameter. setting. parameter.
How to Videos at www.parker.com/pneu/propreg
For inventory, lead
Catalog 0760P 36 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

Set Output Signal

Parameter 6 is used to set the type of output signal to your PLC.
This parameter is used as follows:
Output Signal option “0” = Digital Output – PNP Output Signal option “N” = Digital NPN or Analog 1-10V
• Factory set at “0” Non Adjustable • Factory set at “1” Analog Signal
• Convert to Digital NPN by changing parameter to “0”
Output Signal option “P” = Digital PNP or Analog 1-10V
• Factory set at “1” for Analog Signal Output Signal option “M” = Analog 4-20 mA
• Convert to Digital PNP by changing parameter • Factory set at “2” Non Adjustable
to “0” setting

Parameter Number 6 – Set Output Signal

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
Flashing Decimal (Value 0, 1 or 2) Flashing
Displays current
parameter value. Edits parameter.
Description 1 = m factory 0 = digital
Accesses default for P3H (NPN or PNP) Accepts and saves
changeable Accesses with analog 1 = analog 0..10V new parameter Sequences to next
parameters. parameter no. 6. options 2 = analog 4..20 mA setting. parameter.

Adjust Span Analog Output Signal

Set value is a % of Full Analog range. As an example for a 0-10V output signal, the original factory setting of 100% will give you an
adjustment of 0-10V. If you reset Parameter 8 to 50%, the new output range would be 0-5V or 50% of the full range.
In the event that the output signal is to low, in a certain application, you can adjust it by increasing Parameter 8 to a maximum value of
130% of scale.
Note that all values are nominal and that an actual measurement may be required to ensure signal strength.

Parameter Number 8 – Adjust Span Analog Output Signal

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal Flashing Decimal
(For 2 bar versions (Value between
value = 92) 0 and 130) Flashing

Accepts and saves

Description new parameter
Accesses setting and
changeable Accesses Displays current implements the new Sequences to next
parameters. parameter no. 8. parameter value. Edits parameter. analog signal span. parameter.

How to Videos at www.parker.com/pneu/propreg

Catalog 0760P For inventory, lead

37 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

Adjust Digital Display

If necessary, adjustments can be made to the digital display when using an external pressure sensor.

Parameter Number 9 – Adjust Digital Display Value (Pressure Calibration)

Step 1 2 3 4 5
Press

or or

3-6 seconds

Until Display
Reads

Flashing Decimal Flashing Decimal Flashing

Use up or down
arrows and accept
Description to adjust the
Accesses display value if Accepts and saves
changeable Accesses Displays current using an external new parameter Sequences to next
parameters. parameter no. 9. digital display pressure sensor. setting. parameter.

Set Pressure Scale

Units with NPT port threads are supplied with a factory set psig pressure scale. Use parameter 14 to change scale to bar.

Parameter Number 14 – Set Pressure Scale in psig or bar

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads

Flashing Decimal Flashing Decimal Flashing

Displays current
parameter value.
Description Accesses 1 = psig Accepts and saves
changeable Accesses 0 = bar new parameter Sequences to next
parameters. parameter no. 14. 2 = MPa Edits parameter. setting. parameter.

How to Videos at www.parker.com/pneu/propreg

For inventory, lead
Catalog 0760P 38 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

Preset Minimum Pressure

If there is a need for a pre-set Minimum pressure, use parameter 18. (Note: preset pressure is affected by % P19.)

Parameter Number 18 – Set Minimum Preset Pressure

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
(value between
Flashing Decimal 0 and 200) Flashing
Displays current
parameter value.
Incremental
value is:
Description 2 bar unit:
x 2 mbar x % P19
Accesses Accepts and saves
changeable Accesses 10 bar unit: new parameter Sequences to next
parameters. parameter no. 18. x 10 mbar x % P19 Edits parameter. setting. parameter.

Set Pressure Correction

Pressure correction allows the user to set a Maximum pressure as a percentage of secondary pressure F.S.
Example: If F.S. is 10 bar, set parameter 19 to 50 for Maximum preset pressure of 5 bar.
Pressure correction also affects the Minimum preset pressure in parameter 18.
Example: If F.S. is 10 bar and parameter 18 is set to a value of 100 (1 bar), and parameter 19 is set to 50%, then the actual
Minimum preset pressure seen is 0.5 bar.

Parameter Number 19 – Set Maximum Preset Pressure

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
(value between
Flashing Decimal 0 and 100) Flashing

Displays current
parameter value.
Description Accesses Incremental Accepts and saves
changeable Accesses value is: new parameter Sequences to next
parameters. parameter no. 19. % of F.S. Edits parameter. setting. parameter.

How to Videos at www.parker.com/pneu/propreg

Catalog 0760P For inventory, lead

39 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

Behavior Control
The regulation speed of the pressure regulator can be modified by means of one parameter. (P 20)
The value in this parameter has a range from 0-5. A higher value indicates slower regulation speed, but will be more stable.

Parameter Number 20 – Set Behavior Control

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
(value between
Flashing Decimal 0 and 5) Flashing
Edits parameter
0 = custom set*
1 = fastest (narrow
proportional band)
2 = fast
Description 3 = normal
4 = slow
Accesses 5 = slowest Accepts and saves
changeable Accesses Displays current (proportional new parameter Sequences to next
parameters. parameter no. 20. parameter value. band is broad) setting. parameter.

* When the value 0 is entered, you are able to create your own custom settings true parameters 12, 13 and 21.

Fine Settings
Set Proportional Band
Proportional band is used for setting the reaction sensitivity of the regulator. The displayed value is X 10 mbar and has a range
between 50 (0.5 bar) and 250 (2.5 bar).

Parameter Number 12 – Set Proportional Band (P20 Must be Set to 0)

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
(value between
Flashing Decimal 50 and 250) Flashing
Displays current
parameter value.
Description Accesses Incremental Accepts and saves
changeable Accesses value is: new parameter Sequences to next
parameters. parameter no. 12. x 10 mbar Edits parameter. setting. parameter.

How to Videos at www.parker.com/pneu/propreg

For inventory, lead
Catalog 0760P 40 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Regulators Air Preparation

Set Deadband
Deadband is the Minimum limit of accuracy at which the regulator is set for normal operation. The displayed value is X 10 mbar and has a
range between 4 (40 mbar) and 40 (400 mbar).
Parameter Number 13 – Set Deadband (P20 Must be Set to 0)
Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
(value between
Flashing Decimal 4 and 40) Flashing
Displays current
parameter value.
Description Incremental Accepts and saves
Accesses changeable Accesses parameter value is new parameter Sequences to next
parameters. no. 13. x 10 mbar Edits parameter. setting. parameter.

Proportional Effect

Parameter Number 21 – Set Proportional Effect (P20 Must be Set to 0)

Step 1 2 3 4 5
Press
or or

3-6 seconds

Until Display
Reads
Flashing Decimal
(value between
Flashing Decimal 5 and 100) Flashing
Edits parameter.
5 = fastest
Description Accesses regulation Accepts and saves
changeable Accesses Displays current 100 = slowest new parameter Sequences to next
parameters. parameter no. 21. parameter value. regulation. setting. parameter.

Parameter Number 39 – Displays Current Software Version

Step 1 2 3
Press
or

3-6 seconds

Until Display
Reads

Flashing Decimal
Displays current
Accesses parameter value.
Description changeable Accesses XXX = current
parameters. parameter no. 39. software version

How to Videos at www.parker.com/pneu/propreg

Catalog 0760P For inventory, lead

41 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Dimensional Data Air Preparation

P31P 4 pin M12

Dimensions inches (mm) Connector
0.56
(14.3)

3.51
(89)
4.99
(126.25)

1.47
(37.25)

2.25 0.79
(57) (20)
1.58
1.12 (40)
(28.5)

0.79
(20)

L-Bracket Foot Bracket

P3HKA00ML P3HKA00MC

0.59 0.47
(15) (12)
0.28
(7)
0.98
(25) 2.20 0.39 1.02
(56) (10) (26)
0.28 1.18 0.28 1.18 2.05
(7) (52)
(30) (7) (30)
1.42
(36) 1.57
(40) Ø 0.28 (7)
2.05
(52) 4 holes

3.31
(84)
3.94
(100)

Cables
Description Part Number

2 mtr. cable with moulded straight M12x1 connector CB-M12-4P-2M

Most popular.

For inventory, lead

Catalog 0760P 42 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Dimensional Data Air Preparation

P32P 4 pin M12

Dimensions inches (mm) Connector
0.56
(14.3)

4.16
(105.3)

6.94
(175.7)

2.54
(64.4)

2.96 1.13
(75) (28.6)
1.48 2.26
(37.5) (57.2)

1.13
(28.6)

L-Bracket Foot Bracket

P3KKA00ML P3KKA00MC

0.59 0.47
(15) (12)

0.98
(25) 2.20 1.02
(56) (26)
1.18 1.77 2.05
(30) (45) (52)

0.59 1.42 0.59 1.57

(15) (36) (15) (40)
2.05 Ø 0.28 (7)
(52) 4 holes

3.31
(84)
3.94
(100)

Cables
Description Part Number

2 mtr. cable with moulded straight M12x1 connector CB-M12-4P-2M

Most popular.

Catalog 0760P For inventory, lead

43 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Filter / Regulators Air Preparation

P31 Filter / Regulators – Mini

• Integral 1/4" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation
Operating Information
1 2 Flow capacity*: 1/4 73 scfm (35 dm3/s, ANR)
Operating temperature‡:
Plastic bowl 14°F to 125°F (-10°C to 52°C)
Metal bowl 14°F to 150°F (-10°C to 65.5°C)
Supply pressure (max):
Plastic bowl 150 psig (10 bar)
Metal bowl 250 psig (17 bar)
Port Description Bowl / Standard filtration 5 micron
Size (relieving) Drain Type ‡ Part Number Useful retention†: 0.4 US oz. (12 cm3)
1/4" 125 psig (8 bar) Poly / Manual P31EB92EGMBN5P Adjusting range pressure: 0 to 30 psig (0 to 2 bar)
0 to 60 psig (0 to 4 bar)
1/4" 125 psig (8 bar) Poly / Pulse P31EB92EGBBN5P 0 to 125 psig (0 to 8 bar)
0 to 250 psig (0 to 17 bar)
1/4" 125 psig (8 bar) Metal / Manual P31EB92EMMBN5P Weight: 0.42 lb (0.19 kg)
1/4" 125 psig (8 bar) Metal / Pulse P31EB92EMBBN5P * Inlet pressure 145 psig (10 bar). Secondary pressure 100 psig (6.9 bar)
and 14.5 psig (1 bar) pressure drop.
‡
Units with square gauges: 5°F to 150°F (-15°C to 65.5°C)
‡
For polycarbonate bowl, see caution in Engineering Section A. †
Useful retention refers to volume below the quiet zone baffle.

Gauge supplied with every part. Gauge can be installed on the front or back
of the regulator. If no gauge is installed, both seal screws must be installed.

Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates)

Ordering Information: Within ISO 8573-1: 2001 Class 6 (Particulates)

P31EB 9 2 E G M B N 5 P
Basic Series Thread Type Element Adjustment Mounting
Global Modular Mini BSPP 1 5µ Element E Non-Rising Plastic Panel
P31EB N P
Filter / Regulator BSPT 2 Knob Mount Nut
NPT 9 Relief
Port Size B Relieving
1/4 2 N Non-Relieving

Bowl Type Adjustment Range

Poly Bowl with Bowl Guard G With Square Gauge
Metal Bowl without Sight Gauge M psig Bar MPa
1 = 30* V = 2* 2 = 0.2*
Drain Type 3 = 60 S=4 4 = 0.4
Pulse Drain B 5 = 125 T=8 6 = 0.8
Manual Drain M 7§ = 232 W§ = 16 8§ = 1.6

* Regulator comes with gauge respective to the

adjustment range available.
§
Not available with poly bowl with bowl guard.

Most popular.

For inventory, lead

Catalog 0760P 44 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Filter / Regulators Air Preparation

Material Specifications Flow Charts

Body Aluminum P31EB 1/4" Filter / Regulator
Adjustment knob Acetal
Bonnet Glass-filled nylon
Plastic bowl Polycarbonate
Metal bowl Aluminum
Bowl guard Nylon
Filter element Polyethylene
Seals Nitrile
Springs Steel
Valve assembly Acetal/Nitrile
Diaphragm assembly Stainless steel/Nitrile
Panel nut Acetal
Gauges (*see note below)
Square flush mount 0-60 psig P31KA060XB
Repair and Service Kits gauge 0-160 psig P31KA160XB
Plastic bowl / bowl guard manual drain P31KB00BGM 0-290 psig P31KA290XB
Plastic bowl / bowl guard pulse drain P31KB00BGB 0-4 bar P31KA04BXB
Metal bowl / w/o sight gauge pulse drain P31KB00BMB 0-11 bar P31KA11BXB
5µ particle filter element P31KA00ESE 0-20 bar P31KA20BXB
Panel mount nut - aluminum P31KA00MM 0-0.4 MPa P31KA04MXB
Panel mount nut - plastic P31KA00MP 0-1.1 MPa P31KA11MXB
Angle bracket (attaches via panel nut) P31KB00MR 0-2.0 MPa P31KA20MXB
C-bracket (fits to body) P31KA00MW
Square flush 0-4 bar K4511SCR04B
T-bracket with body connector P31KA00MT mount gauge 0-11 bar K4511SCR11B
Body connector P31KA00CB 0-60 psig K4511SCR060
0-160 psig K4511SCR160

Square with adapter 0-4 bar P6G-PR10040

kit 0-11 bar P6G-PR10110
0-60 psig P6G-PR90060
0-160 psig P6G-PR90160

1.00” Round 1/8” 0-60 psig / 1-4 bar K4510N18060

center back mount 0-160 psig / 0-11 bar K4510N18160

40mm Round 0-30 psig / 0-2 bar K4515N18030

1/8” center back 0-60 psig / 0-4 bar K4515N18060
mount (not for use 0-160 psig / 0-11bar K4515N18160
with common port
regulators) 0-60 psig P31KA060XB

For best performance, regulated pressure should always be set by increasing

the pressure up to the desired setting.

*For P31 Regulators with date code after November 2023 (4423 Date Code),
please use these part numbers when ordering a replacement gauge.
Manual Drain Pulse Drain
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
WARNING adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
Product rupture can cause serious injury. is not a limiting device. This is a common characteristic of most industrial
Do not connect regulator to bottled gas. regulators, and limiting devices may be obtained only by special design. For
Do not exceed Maximum primary pressure rating. best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Catalog 0760P For inventory, lead

45 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Filter / Regulators Air Preparation

P32 Filter / Regulators – Compact

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation
1 2
Operating Information
Flow capacity*: 1/4 166 scfm (78 dm3/s, ANR)
3/8 & 1/2 178 scfm (84 dm3/s, ANR)
Port Description Bowl / Operating temperature:
Size (relieving) Drain Type ‡ Part Number Plastic bowl -13°F to 125°F (-25°C to 52°C)
1/4" 125 psig (8 bar) Poly / Manual P32EB92EGMBNGP Metal bowl -13°F to 150°F (-25°C to 65.5°C)
Supply pressure (max):
1/4" 125 psig (8 bar) Poly / Auto P32EB92EGABNGP Plastic bowl 150 psig (10 bar)
1/4" 125 psig (8 bar) Metal / Manual P32EB92ESMBNGP Metal bowl 250 psig (17 bar)
1/4" 125 psig (8 bar) Metal / Auto P32EB92ESABNGP Standard filtration: 5 micron
Useful retention†: 1.7 US oz. (51 cm3)
3/8" 125 psig (8 bar) Poly / Manual P32EB93EGMBNGP
Adjusting range pressure: 0 to 30 psig (0 to 2 bar)
3/8" 125 psig (8 bar) Poly / Auto P32EB93EGABNGP 0 to 60 psig (0 to 4 bar)
3/8" 125 psig (8 bar) Metal / Manual P32EB93ESMBNGP 0 to 125 psig (0 to 8 bar)
0 to 250 psig (0 to 17 bar)
3/8" 125 psig (8 bar) Metal / Auto P32EB93ESABNGP
Gauge port (2 each): 1/4 NPT, BSPP, BSPT
1/2" 125 psig (8 bar) Poly / Manual P32EB94EGMBNGP
Weight: 1.37 lb (0.62 kg)
1/2" 125 psig (8 bar) Poly / Auto P32EB94EGABNGP * Inlet pressure 145 psig (10 bar). Secondary pressure 80.0 psig (5.5 bar)
1/2" 125 psig (8 bar) Metal / Manual P32EB94ESMBNGP
†
Useful retention refers to volume below the quiet zone baffle.

1/2" 125 psig (8 bar) Metal / Auto P32EB94ESABNGP

‡
For polycarbonate bowl, see caution in Engineering Section A. Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)

Ordering Information:

P32EB 9 2 E G M B N P
Basic Series Thread Type Element Adjustment Mounting
Global Modular Compact BSPP 1 5µ Element E Non-Rising Plastic Panel
P32EB N P
Filter / Regulator BSPT 2 Knob Mount Nut
NPT 9 Relief
B Relieving Adjustment Range
Port Size
N Non-Relieving With Round Gauge
1/4 2
Z 30 psig; 2 bar; 0.2 MPa
3/8 3
M 60 psig; 4 bar; 0.4 MPa
1/2 4
G 125 psig; 8 bar; 0.8 MPa
Bowl Type J§ 250 psig; 17 bar; 1.7 MPa
Poly Bowl with Bowl Guard G Without Gauge
Metal Bowl without Sight Gauge M Y 30 psig; 2 bar; 0.2 MPa
Metal Bowl with Sight Gauge S L 60 psig; 4 bar; 0.4 MPa
N 125 psig; 8 bar; 0.8 MPa
Drain Type
H§ 250 psig; 17 bar; 1.7 MPa
Manual Drain M
* Regulator comes with gauge respective
Auto Drain A to the adjustment range selected.
§ Not available with poly bowl with bowl
guard.

Most popular.

For inventory, lead

Catalog 0760P 46 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Filter / Regulators Air Preparation

Material Specifications Flow Charts

Body Aluminum P32EB 1/4" Filter / Regulator
Adjustment knob Acetal
Element retainer / baffle Acetal
Plastic bowl Polycarbonate
Metal bowl Aluminum
Bowl guard Nylon
Filter element Sintered polyethylene
Seals Nitrile
Springs Steel, stainless steel
Valve assembly Acetal / nitrile
Diaphragm assembly Nitrile / Stainless steel
Panel nut Acetal P32EB3/8" Filter/Regulator
Sight gauge Nylon

Repair and Service Kits

Plastic bowl / bowl guard manual drain P32KB00BGM
Metal bowl / sight gauge manual drain P32KB00BSM
Auto drain P32KA00DA
5µ particle filter element P32KA00ESE
Panel mount nut - aluminum P32KA00MM
Panel mount nut - plastic P32KA00MP
Angle bracket (fits to panel mount threads) P32KB00MR P32EB 1/2" Filter/Regulator
T-bracket (fits to body connector) P32KA00MB
T-bracket with body connector P32KA00MT
Body connector P32KA00CB

WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Gauges
50mm (2") round 0-30 psig / 0-2 bar K4520N14030
1/4" center back
0-60 psig / 0-4 bar K4520N14060
mount
0-160 psig / 0-11 bar K4520N14160
0-300 psig / 0-20 bar K4520N14300
For best performance, regulated pressure should always be set by increasing the
Manual Drain Automatic Drain pressure up to the desired setting.

Catalog 0760P For inventory, lead

47 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Filter / Regulators Air Preparation

P33 Filter / Regulators – Standard

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting
• Secondary pressure ranges
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation

1 2 Operating Information
Flow capacity*: 1/2 200 scfm (94 dm3/s, ANR)
3/4 235 scfm (109 dm3/s, ANR)
Operating temperature:
Port Description / Bowl / Plastic bowl -13°F to 125°F (-25°C to 52°C)
Size Relieving Drain Type ‡ Part Number Metal bowl -13°F to 150°F (-25°C to 65.5°C)
1/2" 125 psig (8 bar) Poly / Manual P33EA94EGMBNGP Supply pressure (max):
Plastic bowl 150 psig (10 bar)
1/2" 125 psig (8 bar) Poly / Auto P33EA94EGABNGP Metal bowl 250 psig (17 bar)
1/2" 125 psig (8 bar) Metal / Manual P33EA94ESMBNGP Standard filtration: 5 micron
Useful retention†: 2.8 US oz. (85 cm3)
1/2" 125 psig (8 bar) Metal / Auto P33EA94ESABNGP
Adjusting range pressure: 0 to 30 psig (0 to 2 bar)
3/4" 125 psig (8 bar) Poly / Manual P33EA96EGMBNGP 0 to 60 psig (0 to 4 bar)
0 to 125 psig (0 to 8 bar)
3/4" 125 psig (8 bar) Poly / Auto P33EA96EGABNGP
0 to 250 psig (0 to 17 bar)
3/4" 125 psig (8 bar) Metal / Manual P33EA96ESMBNGP Gauge port (2 each): 1/4 NPT, BSPP, BSPT
3/4" 125 psig (8 bar) Metal / Auto P33EA96ESABNGP Weight: 1.87 lb. (0.85 kg)
* Inlet pressure 145 psig (10 bar). Secondary pressure 91.3 psig (6.3 bar)
and 14.5 psig (1 bar) pressure drop.
‡
For polycarbonate bowl, see caution in Engineering Section A. †
Useful retention refers to volume below the quiet zone baffle.
Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
Ordering Information:

P33EA 9 6 E G M B N G P
Basic Series Thread Type Element Adjustment Mounting
Global Modular Standard BSPP 1 5µ Element E Non-Rising Plastic Panel
P33EA N P
Filter / Regulator BSPT 2 Knob Mount Nut
NPT 9
Relief Adjustment Range
Port Size B Relieving With Round Gauge
1/2 4 N Non-Relieving Z 30 psig; 2 bar; 0.2 MPa
3/4 6 M 60 psig; 4 bar; 0.4 MPa
Drain Type G 125 psig; 8 bar; 0.8 MPa
Bowl Type
M Manual Drain J§ 250 psig; 17 bar; 1.7 MPa
Poly Bowl with Bowl Guard G
A Auto Drain Without Gauge
Metal Bowl without Sight
M
Gauge Y 30 psig; 2 bar; 0.2 MPa
Metal Bowl with Sight Gauge S L 60 psig; 4 bar; 0.4 MPa
N 125 psig; 8 bar; 0.8 MPa
H§ 250 psig; 17 bar; 1.7 MPa
§ Not available with poly bowl with
bowl guard.

Most popular.

For inventory, lead

Catalog 0760P 48 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Filter / Regulators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P33EA 1/2" Filter / Regulator
Adjustment knob Acetal Inlet Pressure - 10 bar (145 psig)
10
Body cap ABS 140
9
120
Element retainer / baffle Acetal

Secondary Pressure - (psig)

Secondary Pressure - (bar)

8
100 7
Plastic bowl Polycarbonate 8.0 bar
6 116 psig
80
Metal bowl Aluminum 5
60 6.5 bar
4
Filter element Sintered Polyethylene 94.3 psig 4.0 bar
40 3 58 psig
Seals Nitrile 2
20 2.5 bar
Springs Steel, stainless steel 1
36.3 psig
0 0
Valve assembly Brass / nitrile 0 10 20 30 40 50 60 70 80 90 100 110 120 130
Flow - (dm 3/s)
Diaphragm assembly Nitrile / zinc n
0 20 40 60 80 100 120 140 160 180 200 220 240 260
Panel nut Acetal Flow - (scfm)

Sight gauge Nylon

P33EA 3/4" Filter/Regulator
Repair and Service Kits 140
10
Inlet Pressure - 10 bar (145 psig)

9
Plastic bowl / bowl guard, manual drain P33KA00BGM 120

Secondary Pressure - (psig)

Secondary Pressure - (bar)

8

Metal bowl / sight gauge, manual drain P33KA00BSM 100 7

8.0 bar
6 116 psig
Auto drain P32KA00DA 80
5 6.5 bar
94.3 psig
5µ particle filter element P33KA00ESE 60 4
4.0 bar
40 3 58 psig
Diaphragm repair kit - Relieving P33KA00RB 2
20 2.5 bar
Diaphragm repair kit - Non-relieving P33KA00RC 1
36.3 psig
0 0
Panel mount nut - Aluminum P33KA00MM 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Flow - (dm 3/s)
Panel mount nut - Plastic P33KA00MP n
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Angle bracket (fits to panel mount threads) P33KA00MR Flow - (scfm)
T-bracket (fits to body connector) P32KA00MB
T-bracket with body connector P32KA00MT
Body connector P32KA00CB

WARNING
2.87 4.27 Round Product rupture can cause serious injury.
(73) (108) Gauge Do not connect regulator to bottled gas.
1.44 2.87 Do not exceed Maximum primary pressure rating.
(37) (73)

CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
4.09 adjustment is designed to permit outlet pressures within their full range.
(104)
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
11.44 11.22
(291) (285)

Gauges
50mm (2") round 0-30 psig / 0-2 bar K4520N14030
1/4" center back
0-60 psig / 0-4 bar K4520N14060
mount
0-160 psig / 0-11 bar K4520N14160
0-300 psig / 0-20 bar K4520N14300
Use 10mm or For best performance, regulated pressure should always be set by increasing the
.18 (4.8mm) 2.00 Bowl 2.83 pressure up to the desired setting.
3/8" Flex Tubing
I.D. tube (51) removal (72)
barb fitting clearance

Inches (mm)

Manual Drain Automatic Drain

Catalog 0760P For inventory, lead

49 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Lubricators Air Preparation

P31 Lubricators – Mini

• Integral 1/4" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Proportional oil delivery over a wide range of air flows
• Finger tip ratchet control for precise oil drip rate adjustment

1 2

Lubricator
with drain
Operating Information
Flow capacity*:
Port 1/4 52 scfm (25 dm3/s, ANR)
Size Description ‡ Part Number Operating temperature:
Plastic bowl 14°F to 125°F (-10°C to 52°C)
1/4" Poly Bowl - No Drain P31LB92LGNN Metal bowl 14°F to 150°F (-10°C to 65.5°C)
Supply pressure (max):
1/4" Metal Bowl - No Drain P31LB92LMNN Plastic bowl 150 psig (10 bar)
‡
For polycarbonate bowl, see caution in Engineering Section A.
Metal bowl 250 psig (17 bar)
Bowl capacity: 0.6 US oz. (18 cm3)
Weight: 0.29 lb (0.13 kg)
* Inlet pressure 91.3 psig (6.3 bar). Pressure drop 4.9 psig (0.34 bar).

Ordering Information:

P31LB 9 2 L G N N
Basic Series Thread Type Mounting
Global Modular BSPP 1 N No Bracket
P31LB
Mini Lubricator BSPT 2
Drain Type
NPT 9
N No Drain Closed End
Port Size
Bowl Type
1/4 2
G Poly Bowl with Bowl Guard
Lube Type M Metal Bowl without Sight Gauge
Oil Mist Standard Sight L
Dome

Suggested Lubricant ........................................................................................F442 Oil

Petroleum based oil of 100 to 200 SUS viscosity at 100°F (38°C) and an aniline
point greater than 200°F (93°C)
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING
SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)

Most popular.

For inventory, lead

Catalog 0760P 50 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Lubricators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P31LB 1/4" Lubricator
Body cap ABS
Primary Pressure - bar 2.5 6.3 10
Plastic bowl Polycarbonate 0.5
Primary Pressure - psig 36.2 91.4 145
7
Metal bowl Aluminum
6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

Seals Nitrile 5
Sight dome Polycarbonate 4
0.3

Suggested lubricant ISO / ASTM VG32 3 0.2

Pick-up filter Sintered bronze 2
0.1
1

Repair and Service Kits 0 0

0 10 20 30 40 50
Flow - (dm 3/s)
Plastic bowl / bowl guard no drain P31KB00BGN n

0 20 40 60 80 100
Metal bowl / w/o sight gauge no drain P31KB00BMN
Flow - (scfm)
Drip control assembly P32KA00PG
Fill plug P31KA00PL
C-bracket (fits to body) P31KA00MW
T-bracket with body connector P31KA00MT
Body connector P31KA00CB
Oil (1 quart) F442001
Oil (1 galllon) F442002
Oil (12 quart case) F442003
Oil (4 gallon case) F442005

1.58
(40)
1.58 0.79
(40) (20)

2.22
(56.3)

6.04
(153.3)

1.30 Bowl
(33) removal
clearance

Inches (mm)

Catalog 0760P For inventory, lead

51 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Lubricators Air Preparation

P32 Lubricators – Compact

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Proportional oil delivery over a wide range of air flows
• Finger tip ratchet control for precise oil drip rate adjustment
• Fill from top under system pressure

1 2

Lubricator
with drain

Operating Information
Flow capacity*:
Port 1/4 38 scfm (17 dm3/s, ANR)
Size Description ‡
Part Number 3/8 70 scfm (33 dm3/s, ANR)
1/2 90 scfm (42 dm3/s, ANR)
1/4" Poly Bowl - No Drain P32LB92LGNN
Operating temperature:
1/4" Metal Bowl - No Drain P32LB92LSNN Plastic bowl 14°F to 125°F (-10°C to 52°C)
Metal bowl 14°F to 150°F (-10°C to 65.5°C)
3/8" Poly Bowl - No Drain P32LB93LGNN
Supply pressure (max):
3/8" Metal Bowl - No Drain P32LB93LSNN Plastic bowl 150 psig (10 bar)
Metal bowl 250 psig (17 bar)
1/2" Poly Bowl - No Drain P32LB94LGNN Bowl capacity: 4.09 US oz. (121 cm3)
1/2" Metal Bowl - No Drain P32LB94LSNN Weight: 0.68 lb (0.31 kg)
‡
For polycarbonate bowl, see caution in Engineering Section A. * Inlet pressure 91.3 psig (6.3 bar). Pressure drop 4.9 psig (0.34 bar).

Ordering Information:

P32LB 9 2 L G N N
Basic Series Thread Type Mounting
Global Modular BSPP 1 N No Bracket
P32LB
Compact Lubricator BSPT 2
Drain Type
NPT 9
N No Drain Closed End
Port Size
Bowl Type
1/4 2
G Poly Bowl with Bowl Guard
3/8 3
Metal Bowl with Sight
1/2 4 S
Gauge
Lube Type
Oil Mist Standard Sight L
Dome

Suggested Lubricant ........................................................................................F442 Oil

Petroleum based oil of 100 to 200 SUS viscosity at 100°F (38°C) and an aniline
point greater than 200°F (93°C)
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING
SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)

Most popular.

For inventory, lead

Catalog 0760P 52 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Lubricators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P32LB 1/4" Lubricator
Body cap ABS Primary Pressure - bar 1.6 4.0 6.3 10
Primary Pressure - psig 23.2 58 91.4 145
Plastic bowl Polycarbonate 7 0.5

Metal bowl Aluminum 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

5
Seals Nitrile 0.3
4
Sight dome Polycarbonate
3 0.2
Sight gauge Nylon 2
0.1
Suggested lubricant ISO / ASTM VG32 1

Pick-up filter Sintered bronze 0 0

0 10 20 30 40 50 60 70 80
Flow - (dm 3/s)
n

Repair and Service Kits 0 20 40 60 80 100

Flow - (scfm)
120 140 160

Plastic bowl / bowl guard no drain P32KB00BGN

P32LB 3/8" Lubricator
Metal bowl / w/o sight gauge no drain P32KB00BMN
Primary Pressure - bar 1.6 4.0 6.3 10
Metal bowl / Sight gauge no drain P32KB00BSN 0.5
Primary Pressure - psig 23.2 58 91.4 145
7
Drip control assembly P32KA00PG 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

Fill plug P32KA00PL 5
0.3
L-bracket (fits to body) P32KA00ML 4

3 0.2
T-bracket (fits to body connector) P32KA00MB
2
T-bracket with body connector P32KA00MT 1
0.1

Body connector P32KA00CB 0 0

0 10 20 30 40 50 60 70 80
Oil (1 quart) F442001 Flow - (dm 3/s)
n

Oil (1 galllon) F442002 0 20 40 60 80 100 120 140 160

Flow - (scfm)
Oil (12 quart case) F442003
Oil (4 gallon case) F442005
P32LB 1/2" Lubricator
Primary Pressure - bar 1.6 4.0 6.3 10
Primary Pressure - psig 23.2 58 91.4 145
7 0.5

6 0.4
Pressure Drop - (psig)

Pressure Drop - (bar)

2.36 5
(60) 0.3
2.36 1.18 4
(60) (30) 3 0.2
2
0.1
1

2.45 0 0
0 10 20 30 40 50 60 70 80
(62.3) Flow - (dm 3/s)
n

0 20 40 60 80 100 120 140 160

Flow - (scfm)

8.56
(217.3)

2.28 Bowl
removal
(58) clearance

Inches (mm)

Catalog 0760P For inventory, lead

53 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Lubricators Air Preparation

P33 Lubricators – Standard

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Proportional oil delivery over a wide range of air flows
• Finger tip ratchet control for precise oil drip rate adjustment
• Fill from top under system pressure

1 2

Lubricator
with drain

Operating Information
Flow capacity*:
1/2 110 scfm (52 dm3/s, ANR)
3/4 150 scfm (71 dm3/s, ANR)
Port Operating temperature:
Size Description ‡ Part Number Plastic bowl 14°F to 125°F (-10°C to 52°C)
Metal bowl 14°F to 150°F (-10°C to 65.5°C)
1/2" Poly Bowl - No Drain P33LA94LGNN
Supply pressure (max):
1/2" Metal Bowl - No Drain P33LA94LSNN Plastic bowl 150 psig (10 bar)
Metal bowl 250 psig (17 bar)
3/4" Poly Bowl - No Drain P33LA96LGNN Bowl capacity: 6.1 US oz. (181 cm3)
3/4" Metal Bowl - No Drain P33LA96LSNN Weight: 1.04 lb (0.47 kg)
‡
For polycarbonate bowl, see caution in Engineering Section A. * Inlet pressure 91.3 psig (6.3 bar). Pressure drop 4.9 psig (0.34 bar).

Ordering Information:

P33LA 9 6 L G N N
Basic Series Thread Type Mounting
Global Modular BSPP 1 N No Bracket
P33LA
Standard Lubricator BSPT 2
Drain Type
NPT 9
N No Drain Closed End
Port Size
Bowl Type
1/2 4
G Poly Bowl with Bowl Guard
3/4 6
Metal Bowl with Sight
S
Lube Type Gauge
Oil Mist Standard Sight Dome L

Suggested Lubricant ........................................................................................F442 Oil

Petroleum based oil of 100 to 200 SUS viscosity at 100°F (38°C) and an aniline
point greater than 200°F (93°C)
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING
SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)

Most popular.

For inventory, lead

Catalog 0760P 54 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Lubricators Air Preparation

Material Specifications Flow Charts

Body Aluminum
P33LA 1/2" Lubricator
Body cap ABS
Primary Pressure - bar 1.6 4.0 6.3 10
Plastic bowl Polycarbonate 0.5
Primary Pressure - psig 23.2 58 91.4 145
7
Metal bowl Aluminum 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

Seals Nitrile 5
0.3
Sight dome Polycarbonate 4

3 0.2
Sight gauge Nylon
2
Suggested lubricant ISO / ASTM VG32 0.1
1
Pick-up filter Sintered bronze 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120
Flow - (dm 3/s)
n

Repair and Service Kits 0 20 40 60 80 100 120 140 160 180 200 220 240
Flow - (scfm)
Plastic bowl / bowl guard no drain P33KA00BGN
Metal bowl / w/o sight gauge no drain P33KA00BMN
P33LA 3/4" Lubricator
Metal bowl / sight gauge no drain P33KA00BSN Primary Pressure - bar 1.6 4.0 6.3
Primary Pressure - psig 23.2 58 91.4
Drip control assembly P32KA00PG 7 0.5

Fill plug P32KA00PL 6 0.4

Pressure Drop - (psig)

Pressure Drop - (bar)

L-bracket (fits to body) P33KA00ML 5
0.3
4
T-bracket (fits to body connector) P32KA00MB
3 0.2
T-bracket with body connector P32KA00MT
2
Body connector P32KA00CB 1
0.1

Oil (1 quart) F442001 0 0

0 10 20 30 40 50 60 70 80 90 100 110 120
Oil (1 galllon) F442002 Flow - (dm 3/s)
n
Oil (12 quart case) F442003 0 20 40 60 80 100 120 140 160 180 200 220 240
Flow - (scfm)
Oil (4 gallon case) F442005

2.90
(73)
1.44 2.90
(36) (73)

2.00
(51)

9.20
(234)

2.00 Bowl
(51) removal
clearance

Inches (mm)

Catalog 0760P For inventory, lead

55 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Mini Combinations Air Preparation

Popular Combinations: Inlet pressure 145 psig (10 bar), secondary pressure 100 psig (6.9 bar), 14.5 psig (1 bar) pressure drop.
Filter + Regulator + Lubricator Combinations, poly bowl
5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Pulse Drain
1/4" 27 scfm (13 dm3/s, ANR) P31CB92GEMN5LNW P31CB92GEBN5LNW

Filter/Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Pulse Drain
1/4" 28 scfm (14 dm3/s, ANR) P31CA92GEMN5LNW P31CA92GEBN5LNW

Ball Valve + Filter + Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Pulse Drain
1/4" 27 scfm (13 dm3/s, ANR) P31QB92GEMN5LNW P31QB92GEBN5LNW

Ball Valve + Filter/Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Pulse Drain
1/4" 28 scfm (14 dm3/s, ANR) P31QA92GEMN5LNW P31QA92GEBN5LNW

Filter / Regulator coding

(use with codes: A M)
Filter coding Regulator coding Lubricator coding Assembly
(use with combo codes: (use with combo code: B) (use with combo configuration
B F G). For multiple filters, codes: A B)
repeat as needed.

P31 C B 9 2 G E M N 5 L N W

Combination Thread Type Element Relief / Adjustment Lub Type Mounting

B/V + Combination Q BSPP 1 5µ Element E Non-Rising Knob N Oil Mist No Bracket A
Combination + B/V X BSPT 2 Standard L
0.01µ Element C Port Blocks* C
Sight Dome
Combination C NPT 9 Adjustment Range
1µ Element 9 Port Blocks
With Square Gauge D
B/V = Ball valve & Wall Brkt*
Adsorber A
Port Size Psig: Drain Type
Wall Bracket W
Combination Type* 1/4 2 30 psig* 1 No Drain;
N * For 3/8” Port
Drain Type Closed End
F/R+L A F+Fc+Fa G 60 psig 3 Blocks please
Manual Drain M order separately.
F+R+L B F/R+Fc M 125 psig 5
See Kits section.
F+Fc F Pulse Drain B 232 psig§ 7
* Combination type Bar: MPa:
F = 5µ 2 Bar* V 0.2 MPa* 2
Bowl Type
Fc1 = 1µ
Fc = .01µ Poly Bowl with Bowl Guard ‡ G 4 Bar S 0.4 MPa 4
Fa = Adsorber Metal Bowl without Sight Gauge M 8 Bar T 0.8 MPa 6
Note: All bowl types are the same 16 Bar§ W 0.8 MPa§ 8
for each component * Regulator comes with gauge respective
Example: If a “G” is specified for a F+L, to the adjustment range available.
both units would get a poly bowl with §
Not available with poly bowl with bowl guard.
bowl guard.
‡
For polycarbonate bowl, see caution Gauge supplied with every part. Gauge can be installed on the front or back of the
in Engineering Section A. regulator. If no gauge is installed, both seal screws must be installed.

For inventory, lead

Catalog 0760P 56 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Compact Combinations Air Preparation

Popular Combinations: Inlet pressure 145 psig (10 bar), secondary pressure 91.3 psig (6.3 bar), 14.5 psig (1 bar) pressure drop.
Filter + Regulator + Lubricator Combinations, poly bowl
5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/4" 42 scfm (20 dm3/s, ANR) P32CB92GEMNGLNW P32CB92GEANGLNW
3/8" 68 scfm (32 dm3/s, ANR) P32CB93GEMNGLNW P32CB93GEANGLNW
1/2" 85 scfm (40 dm3/s, ANR) P32CB94GEMNGLNW P32CB94GEANGLNW

Filter/Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/4" 45 scfm (22 dm3/s, ANR) P32CA92GEMNGLNW P32CA92GEANGLNW
3/8" 70 scfm (33 dm3/s, ANR) P32CA93GEMNGLNW P32CA93GEANGLNW
1/2" 90 scfm (43 dm3/s, ANR) P32CA94GEMNGLNW P32CA94GEANGLNW

Ball Valve + Filter + Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/4" 42 scfm (20 dm /s, ANR)
3
P32QB92GEMNGLNW P32QB92GEANGLNW
3/8" 68 scfm (32 dm3/s, ANR) P32QB93GEMNGLNW P32QB93GEANGLNW
1/2" 85 scfm (40 dm3/s, ANR) P32QB94GEMNGLNW P32QB94GEANGLNW

Ball Valve + Filter/Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/4" 45 scfm (22 dm3/s, ANR) P32QA92GEMNGLNW P32QA92GEANGLNW
3/8" 70 scfm (33 dm3/s, ANR) P32QA93GEMNGLNW P32QA93GEANGLNW
1/2" 90 scfm (43 dm3/s, ANR) P32QA94GEMNGLNW P32QA94GEANGLNW
Filter / Regulator coding
(use with codes: A M)
Filter coding Regulator coding Lubricator coding Assembly
(use with combo codes: (use with combo code: B) (use with combo configuration
B F G). For multiple filters, codes: A B)
repeat as needed.

P32 C B 9 4 G E M N G L N W

Combination Thread Type Element Relief / Adjustment Lub Type Mounting

B/V + Combination Q BSPP 1 0.01µ Element C Non-Rising Knob Oil Mist No Bracket A
N
Combination + B/V X BSPT 2 Relieving Standard L
0.01µ Element D Port Blocks C
Sight Dome
Combination C NPT 9 with dpi* Adjustment Range Port Blocks
D
B/V = Ball valve 5µ Element E With Round Gauge & Wall Brkt
Port Size Drain Type
5µ Element F 30 psig; 2 bar; Wall Bracket W
1/4*    2 Z No Drain;
Combination Type* with dpi* 0.2 MPa N
3/8 3 Closed End
F/R+L A F+Fc+Fa G 1µ Element 9 60 psig; 4 bar;
1/2 4 M
0.4 MPa
F+R+L B F/R+Fc M 1µ Element Q
* Order combo with dpi* 125 psig; 8 bar;
F+Fc F Q or X: ball valve G
0.8 MPa
(BV) comes with Adsorber A
* Combination type
3/8 ports. 250 psig; 17 bar;
F = 5µ * Not available with J
1.7 MPa§
Fc1 = 1µ Bowl Type F/R.
Fc = .01µ Without Gauge
Poly Bowl with Bowl Guard ‡ G * Regulator comes
Fa = Adsorber Drain Type 30 psig; 2 bar;
Metal Bowl without Sight Gauge* M Y with gauge
‡
For polycarbonate Auto Drain A 0.2 MPa
respective
bowl, see caution Metal Bowl With Sight Gauge S 60 psig; 4 bar; to the adjustment
Manual Drain M L
in Engineering * Not available when using lubricator. 0.4 MPa range selected.
Section A. Note: All bowl types are the same for
125 psig; 8 bar; §
Not available with
each component. N
0.8 MPa poly bowl with bowl
Example: If a “G” is specified for a F+L,
both units would get a poly bowl with 250 psig; 17 bar; 1.7 guard.
H
bowl guard. MPa§

Catalog 0760P For inventory, lead

57 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Standard Combinations Air Preparation

Popular Combinations: Inlet pressure 145 psig (10 bar), secondary pressure 91.3 psig (6.3 bar), 14.5 psig (1 bar) pressure drop.
Filter + Regulator + Lubricator Combinations, poly bowl
5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/2" 90 scfm (43 dm3/s, ANR) P33CB94GEMNGLNW P33CB94GEANGLNW
3/4" 110 scfm (52 dm3/s, ANR) P33CB96GEMNGLNW P33CB96GEANGLNW

Filter/Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/2" 110 scfm (52 dm3/s, ANR) P33CA94GEMNGLNW P33CA94GEANGLNW
3/4" 150 scfm (71 dm3/s, ANR) P33CA96GEMNGLNW P33CA96GEANGLNW

Ball Valve + Filter + Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/2" 90 scfm (43 dm3/s, ANR) P33QB94GEMNGLNW P33QB94GEANGLNW
3/4" 110 scfm (52 dm3/s, ANR) P33QB96GEMNGLNW P33QB96GEANGLNW

Ball Valve + Filter/Regulator + Lubricator Combinations, poly bowl

5 micron element, 116 psig (8 bar) regulator + gauge and wall mounting brackets
Port Size Flow Manual Drain Auto Drain
1/2" 110 scfm (52 dm3/s, ANR) P33QA94GEMNGLNW P33QA94GEANGLNW
3/4" 150 scfm (71 dm3/s, ANR) P33QA96GEMNGLNW P33QA96GEANGLNW

Filter / Regulator coding

(use with codes: A M)
Filter coding Regulator coding Lubricator coding Assembly
(use with combo codes: (use with combo code: B) (use with combo configuration
B F G). For multiple filters, codes: A B)
repeat as needed.

P33 C B 9 6 G E M N G L N W

Combination Thread Type Element Relief / Adjustment Lub Type Mounting

B/V + Combination Q BSPP 1 0.01µ Element C Non-Rising Knob Oil Mist No Bracket A
N
Combination + B/V X BSPT 2 Relieving Standard L
0.01µ Element D* Port Blocks C
Sight Dome
Combination C NPT 9 with dpi
Port Blocks
D
B/V = Ball valve 5µ Element E Adjustment Range & Wall Brkt
Drain Type
Port Size 5µ Element F* Wall Bracket W
With Round Gauge
Combination Type* 1/2 4 with dpi No Drain;
30 psig; 2 bar; 0.2 MPa Z N
Closed End
F/R+L A F+Fc+Fa G 3/4 6 1µ Element 9
60 psig; 4 bar; 0.4 MPa M
F+R+L B F/R+Fc M 1µ Element Q* 125 psig; 8 bar; 0.8 MPa G
F+Fc F with dpi
250 psig; 17 bar; 1.7 MPa J*
* Combination type Adsorber A
Without Gauge
F = 5µ
Bowl Type ‡ * Not available with
Fc1 = 1µ 30 psig; 2 bar; 0.2 MPa Y
Poly Bowl With Bowl Guard G F/R.
Fc = .01µ 60 psig; 4 bar; 0.4 MPa L
Fa = Adsorber Metal Bowl Without Sight Gauge M* Drain Type 125 psig; 8 bar; 0.8 MPa N
Metal Bowl With Sight Gauge S 250 psig; 17 bar; 1.7 MPa H*
Auto Drain A
‡
For polycarbonate * Not available when using lubricator. * Not available with poly bowl
bowl, see caution Note: All bowl types are the same for Manual Drain M
with bowl guard.
in Engineering each component.
Section A. Example: If a “G” is specified for a F+L,
both units would get a poly bowl with
bowl guard.

For inventory, lead

Catalog 0760P 58 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Combination Dimensional Data Air Preparation

Popular Combination Dimensions inches (mm)

P32 COMBO
DIMENSIONS TO BE
UPDATED SOON

Catalog 0760P For inventory, lead

59 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Dump Valves Air Preparation

P31D & P32D Dump Valves

• Modular design with 1/4" or 1/2" integral ports
(NPT, BSPP & BSPT)
• The 3-way, 2-position function automatically dumps
downstream pressure on the loss of pilot signal
• Solenoid or air pilot options
• High flow & exhaust capability
• Silencer included

Remotely operated dump valves automatically shut off upstream

pressure and exhaust the downstream pressure when the pilot Operating Information
pressure is released.
Flow capacity*: P31D 36 scfm (17 dm3/s, ANR)
To maintain these units in the open position a pilot supply to the P32D 108 scfm (51 dm3/s, ANR)
air pilot operated version or an electrical signal to the solenoid Temperature range (max)†:
operated version must be maintained. Solenoid operated 14°F to 122°F (-10°C to 50°C)
Air pilot operated -4°F to 176°F (-20°C to 80°C)
The valve will automatically dump when the holding signal is Pressure (max):
removed. Solenoid operated 150 psig (10 bar)
Air pilot operated 250 psig (17 bar)
Port Weight Operating pressure (min): 44 psig (3 bar)
Size Description lbs (kg) Part Number
Fluid: Compressed air
1/4" 120VAC Solenoid & cable plug 0.8 (0.37) P31DA92SGNC1FN Ports: Air pilot 1/8
1/4" 24VDC Solenoid & cable plug ‡ 0.9 (0.41) P31DA92SGNC2CN Exhaust P31D - 1/4; P32D - 1/2
Gauge P31D - 1/8; P32D - 1/4
1/2" 120VAC 30mm coil & cable plug incl. ‡ 1.5 (0.69) P32DA94SCNA3GN * Inlet pressure 91.3 psig (6.3 bar), inlet pressure and
1/2" 24VDC 30mm coil & cable plug incl. ‡ 2.0 (0.91) P32DA94SCNA2CN 14.5 psig (1 bar) pressure drop.
† Air supply must be dry enough to avoid ice formation at temperatures
1/2" External air pilot operated ‡ 1.9 (0.87) P32DA94PPN below 35.6°F (2°C). Snap pressure: Full flow when downstream
pressure reaches 50% of the inlet pressure.

‡ Includes exhaust silencer

Ordering Information:

Solenoid type only

P31DA 9 2 S G N C 2CN
Body Size Actuator Interface Solenoid Voltage
Dump Valve (1/4") P31DA 15mm Solenoid (P31 2CN 24VDC Non Locking Manual Override
G
Dump Valve (1/2") P32DA only) 3GN 120VAC Non Locking Manual Override
C 30mm Solenoid 120VAC Non Locking Manual Override
Thread Type 1FN
P Threaded Air Pilot (P31 series only)
BSPP 1
BSPT 2 Pilot Type Solenoid Type
NPT 9 External Air C 15mm (P31 series only)
P
Pilot A 30mm CNOMO Coil (P32 only)
Port Size S Solenoid Pilot 30mm CNOMO Coil
Note: Global Modular Mini (1/4") 2 D
P32 unit used for both
(M12 connection) (P32 only)
P32 & P33 series Global Modular Compact (1/2") 4

Most popular.

For inventory, lead

Catalog 0760P 60 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Dump Valves Air Preparation

Material Specifications Flow Charts

Body Aluminum
P31DA 1/4" Remote Dump Valve
Body cover Polyester
Inlet Pressure - 6.3 bar (91.3 psig)
Seals Nitrile NBR 8

100 7 10 bar

Secondary Pressure - (psig)

Secondary Pressure - (bar)

9.0 bar 145 psig
6 6.3 bar 8.0 bar 130.5 psig
80 91.4 psig
7 bar 116 psig
5 6.0 bar
101.5 psig
87 psig
Mounting Brackets 60 4 5.0 bar
4.0 bar 72.5 psig
3 58 psig
Part number 40 3.0 bar
43.5 psig
2
Description P31D 20
1
L-bracket mounting kit P3HKA00ML
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
P31
Flow - (dm 3/s)
n
Foot bracket mounting kit P3HKA00MC 0 20 40 60 80 100 120 140
Flow - (scfm)
P31

Note:
For solenoid operators and cable plugs (connectors) see pages 87 and 88.
P32DA 1/2" Remote Dump Valve
10 bar
Inlet Pressure - 6.3 bar (91.3 psig) 145 psig
8
9.0 bar
6.3 bar 130.5 psig
100 7 8.0 bar
91.4 psig

Secondary Pressure - (psig)

Secondary Pressure - (bar)

116 psig
7 bar
6 6.0 bar 101.5 psig
80 87 psig
5 5.0 bar
72.5 psig
60 4 4.0 bar
58 psig
3.0 bar
40 3 43.5 psig

2
20
1

0 0
0 20 40 60 80 100 120 140 150
Flow - (dm 3/s)
n

0 40 80 120 160 200 240 280 320

Flow - (scfm)

Dimensions inches (mm)

P31D P32D 2.87
(73)

5.35
(136) 1/8"
6.53 Gauge
3.30 6.87 1/4"
(166) Port
(84) (174.5) Gauge
Port
1.45 8.95
(37) 4.31
(227.3) (109.5)
1.20 2.53
(30.5) (64.5)
0.15
(4)

1.57 2.08
(40) (53)

0.94
(24)
2.24 0.23
(57) 2.25 (6)
(57.2)

1.02
2.95 (26)
Most popular. (75)

Catalog 0760P For inventory, lead

61 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Soft Start Valves Air Preparation

P31S & P32S Soft Start Valves

• Modular design with 1/4" or 1/2" integral ports
(NPT, BSPP & BSPT)
• The 2-way, 2-position function provides for the safe
introduction of pressure
• Adjustable slow start
• Solenoid or air pilot options
• High flow

Parker Global Series Soft Start Valves, provide for the safe
introduction of pressure to machines or systems. Soft Start
Valves, allow the pressure to gradually build to the set point
before fully opening to deliver full flow at line pressure.
The controlled introduction of pressure can be an important
Operating Information
safety factor and prevent damage to tooling when air pressure is
introduced at machine or system start up. Flow capacity*: P31S 36 scfm (17 dm3/s, ANR)
P32S 101 scfm (48 dm3/s, ANR)
Note: Soft Start Valves must be installed downstream of
Temperature range (max)†:
a 3/2 valve with exhaust capability
Solenoid operated 14°F to 122°F (-10°C to 50°C)
Port Weight Air pilot operated -4°F to 176°F (-20°C to 80°C)
Size Description Lbs (Kg) Part Number Pressure (max):
Solenoid operated 150 psig (10 bar)
1/4" 120VAC Solenoid & Cable Plug 0.8 (0.37) P31SA92SGNC1FN
Air pilot operated 250 psig (17 bar)
1/4" 24VDC Solenoid & Cable Plug 0.9 (0.41) P31SA92SGNC2CN Operating pressure (min): 44 psig (3 bar)
1/4" Internal Air Pilot Operated 0.8 (0.37) P31SA92Y0N Fluid: Compressed air
1/4" External Air Pilot (1/8" threaded) 0.8 (0.37) P31SA92PPN Ports: Air pilot 1/8
Gauge P31S - 1/8; P32S - 1/4
1/2" 120VAC 30mm Coil & Cable Plug incl. 1.5 (0.87) P32SA94SCNA3GN * Inlet pressure 91.3 psig (6.3 bar), inlet pressure and
1/2" 24VDC 30mm Coil & Cable Plug 2.0 (0.90) P32SA94SCNA2CN 14.5 psig (1 bar) pressure drop.
† Air supply must be dry enough to avoid ice formation at temperatures
1/2" Internal Air Pilot Operated 2.0 (0.90) P32SA94Y0N below 35.6°F (2°C). Snap pressure: Full flow when downstream
pressure reaches 50% of the inlet pressure.
1/2" External Air Pilot (1/8 threaded) 1.5 (0.87) P32SA94PPN

Ordering Information:

Solenoid type only

P31SA 9 2 S G N C 2CN
Body Size Actuator Interface Solenoid Voltage
Soft Start P31SA 0 Internal Pilot 2CN 24VDC Non Locking Manual Override
Soft Start P32SA G 15mm Solenoid (P31 Only) 3GN 120VAC Non Locking Manual Override
C 30mm Solenoid 120VAC Non Locking Manual Override
Thread Type 1FN
P Threaded Air Pilot (P31 series only)
BSPP 1
BSPT 2 Pilot Type Solenoid Type
NPT 9 P External Air Pilot C 15mm (P31 series only)
S Solenoid Pilot A 30mm CNOMO Coil (P32 only)
Port Size
Note:
Global Modular Mini (1/4") 2 Y Internal Air Pilot 30mm CNOMO Coil
P32 unit used for both D
(M12 connection) (P32 only)
P32 & P33 series Global Modular Compact (1/2") 4

Most popular.

For inventory, lead

Catalog 0760P 62 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Soft Start Valves Air Preparation

Material Specifications Flow Charts

Body Aluminum
P31SA 1/4" Soft Start Valve
Body cover Polyester Inlet Pressure - 6.3 bar (91.3 psig)
8
Seals Nitrile NBR
7 10 bar
100 9.0 bar 145 psig

Secondary Pressure - (psig)

Secondary Pressure - (bar)

6 6.3 bar 8.0 bar 130.5 psig
Service Kits 80
5
91.4 psig 7 bar 116 psig
6.0 bar
101.5 psig
87 psig
P31S L-bracket mounting kit P3HKA00ML 60 4
5.0 bar
72.5 psig
4.0 bar
Foot bracket mounting kit P3HKA00MC 40 3 3.0 bar 58 psig
43.5 psig
P32S L-bracket mounting kit P3KKA00ML 2
20
1
Foot bracket mounting kit P3KKA00MC
0
Note: 0 5 10 15 20 25 30 35 40 45 50 55 60 65
For solenoid operators and cable plugs (connectors) see pages 87 and 88. Flow - (dm 3/s)
n

0 20 40 60 80 100 120
Flow - (scfm)

P32SA 1/2" Soft Start Valve

10 bar
Inlet Pressure - 6.3 bar (91.3 psig) 145 psig
8 9.0 bar
6.3 bar 130.5 psig
100 7 91.4 psig
8.0 bar

Secondary Pressure - (psig)

116 psig

Secondary Pressure - (bar)

7 bar
6 6.0 bar 101.5 psig
80 87 psig
5 5.0 bar
72.5 psig
60 4 4.0 bar
58 psig

40 3 3.0 bar
43.5 psig
2
20
1

0 0
0 20 40 60 80 100 120 140
Flow - (dm 3/s)
n

0 40 80 120 160 200 240 280

Flow - (scfm)

Dimensions inches (mm)

P31S P32S
- + - + 2.87
5
5

(73)

6.53
(166) 1/8"
Gauge 1/4"
5.35 Port 6.87
(174.5) Gauge
(136) Port
1.45
(37) 4.31
(109.5)
2.53
(64.5)

Soft Start Function:

1.57
100% 4 (40)
Pressure (p)

90%
2.24 2.25
(57) (57.2)
3

1 0% 1 Start signal
2 2 Switching time delay 2.95
3 Gradual pressure build up (75)
Time (t) 4 Operating pressure p2 (=p1)

Catalog 0760P For inventory, lead

63 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Combined Soft Start / Dump Valves Air Preparation

P31T & P32T Combined Soft Start / Dump Valves

• Modular design with 1/4" or 1/2" integral ports
(NPT, BSPP & BSPT)
• Provides for the safe introduction of pressure
• The 3-way, 2-position function automatically dumps
downstream pressure on the loss of pilot signal
• Adjustable slow start
• Solenoid or air pilot options
• High flow & exhaust capability
• Silencer included
2

3 1

Parker Global Series Combined Soft Start / Dump Valves, provide for
the safe introduction of pressure to machines or systems. Soft Start / Operating Information
Dump Valves when set, allow the pressure to gradually build to the set Flow capacity*: P31T 36 scfm (17 dm3/s, ANR)
point before fully opening to deliver full flow at line pressure. P32T 97 scfm (46 dm3/s, ANR)
The controlled introduction of pressure can be an important safety Temperature range (max)†:
Solenoid operated 14°F to 122°F (-10°C to 50°C)
factor and prevent damage to tooling when air pressure is introduced at Air pilot operated -4°F to 176°F (-20°C to 80°C)
machine or system start up.
Pressure (max):
To maintain these units in the open position a pilot supply to the air Solenoid operated 150 psig (10 bar)
pilot operated version or an electrical signal to the solenoid operated Air pilot operated 250 psig (17 bar)
version must be maintained. The valve will automatically dump when Operating pressure (min): 44 psig (3 bar)
the holding signal is removed. Fluid: Compressed air
Ports: Air pilot 1/8
Port Weight Exhaust P31T - 1/4; P32T - 1/2
Size Description lbs (kg) Part Number
Gauge P31T - 1/8; P32T - 1/4
1/4" 120VAC Solenoid & cable plug 0.8 (0.37) P31TA92SGNC1FN * Inlet pressure 91.3 psig (6.3 bar), inlet pressure and
1/4" 24VDC Solenoid & cable plug 0.9 (0.41) P31TA92SGNC2CN 14.5 psig (1 bar) pressure drop.
† Air supply must be dry enough to avoid ice formation at temperatures
1/2" 120VAC 30mm coil & cable plug incl. 1.9 (0.87) P32TA94SCNA3GN below 35.6°F (2°C). Snap pressure: Full flow when downstream
1/2" 24VDC 30mm coil & cable plug incl. 2.0 (0.91) P32TA94SCNA2CN pressure reaches 50% of the inlet pressure.

1/2" External air pilot operated 1.9 (0.87) P32TA94PPN

Ordering Information:
Solenoid type only

P31TA 9 2 S G N C 2CN
Body Size Actuator Interface Solenoid Voltage
Soft Start / Dump Valve (1/4") P31TA 15mm Solenoid (P31 2CN 24VDC Non Locking Manual Override
G
Soft Start / Dump Valve (1/2") P32TA only) 3GN 120VAC Non Locking Manual Override
C 30mm Solenoid 120VAC Non Locking Manual Override
Thread Type 1FN
P Threaded Air Pilot (P31 series only)
BSPP 1
Pilot Type Solenoid Type
BSPT 2
External Air C 15mm (P31 series only)
NPT 9 P
Pilot A 30mm CNOMO Coil (P32 only)
Port Size S Solenoid Pilot
Note:
30mm CNOMO Coil
Global Modular Mini (1/4") 2 D
P32 unit used for both (M12 connection) (P32 only)
P32 & P33 series Global Modular Compact (1/2") 4

Most popular.

For inventory, lead

Catalog 0760P 64 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Combined Soft Start / Dump Valves Air Preparation

Material Specifications Flow Charts

Body Aluminum
P31TA 1/4" Soft Start & Dump Valve
Body cover Polyester
Inlet Pressure - 6.3 bar (91.3 psig)
Seals Nitrile NBR 8

100 7 10 bar

Secondary Pressure - (psig)

Secondary Pressure - (bar)

9.0 bar 145 psig
6.3 bar
6 8.0 bar 130.5 psig
Service Kits
91.4 psig
80 7 bar
116 psig
6.0 bar
5 87 psig 101.5 psig
P31T L-bracket mounting kit P3HKA00ML 60 4
5.0 bar
72.5 psig
4.0 bar
Foot bracket mounting kit P3HKA00MC 40 3 3.0 bar 58 psig
43.5 psig
P32T L-bracket mounting kit P3KKA00ML 2
20
Foot bracket mounting kit P3KKA00MC 1

0
Note: 0 5 10 15 20 25 30 35 40 45 50 55 60 65
For solenoid operators and cable plugs (connectors) see pages 87 and 88. Flow - (dm 3/s)
n

0 20 40 60 80 100 120
Flow - (scfm)

P32TA 1/2" Soft Start & Dump Valve

10 bar
Inlet Pressure - 6.3 bar (91.3 psig) 145 psig
8
9.0 bar
6.3 bar 130.5 psig
100 7 91.4 psig 8.0 bar

Secondary Pressure - (psig)

Secondary Pressure - (bar)

7 bar 116 psig
6 6.0 bar 101.5 psig
80 87 psig
5 5.0 bar
72.5 psig
60 4 4.0 bar
58 psig
3 3.0 bar
40 43.5 psig
2
20
1

0 0
0 20 40 60 80 100 120 140
Flow - (dm 3/s)
n

0 40 80 120 160 200 240 280

Flow - (scfm)

Dimensions inches (mm)

P31T P32T
- + - + 2.87
5

(73)
5

5.35
1/8" 6.87 1/4"
6.53 (136) Gauge
(166) Gauge (174.5)
3.30 Port
Port 8.95
(84) 4.31
(227.3)
1.45 (109.5)
(37) 2.53
(64.5)
1.20
(30.5)
0.15
(4)
2.08
(53)
Soft Start Function: 1.57
100% 4 (40)
Pressure (p)

0.94 0.23
90%
(24) 2.25 (6)
2.24
3 (57.2)
(57)
1 0%
1 Start signal
2
2 Switching time delay 1.02
Time (t)
3 Gradual pressure build up 2.95 (26)
4 Operating pressure p2 (=p1) (75)

Catalog 0760P For inventory, lead

65 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Safety Exhaust Valves Air Preparation

P33D & P33T Safety Exhaust Valves

• Easy electrical interface with M12 connectors to
safety circuit
• External monitoring provides a cost and space saving 1
3
2

advantage
• Solid state pressure sensors provide accurate, fast 1
3
2

fault detection
• Quick visual LED indicators on the front of the valve
• Superior seated seal design for longer life
• Safety exhaust outlet is no-maintenance and
non-clog by design
• Suitable for stand alone use or modular mounting to
P32 or P33 FRL assembly
• High B10 life value
• Fast exhaust times allow for smaller machine
footprint

(optional soft start)

Operating Information
Operating pressure: 30 to 150 PSIG (2 to 10 bar)
Minimum operating pressure: 30 PSIG (2 bar)
Ambient temperature: 40° to 120°F (4° to 50°C)
Recommended filtration: 40µ
Operating medium: Compressed air
Ingress protection class: IP65
B10 (mio): 10 million switching cycles
B10 d (mio): 20 million switching cycles
Allowable discordance: 150ms
Flow media: Compresses air to ISO 8573-1
Class 7:4:4
Weight lbs (kg): 6.5 (2.9) with soft start
4.2 (1.9) without soft start
The soft start opens to full flow at approximately 60% of input pressure.

Ordering Information:

P3 3 T B 1 6 A B E N
Global Design Port Size Sensor Gauge 2
Standard 3 Current B Monitoring No Gauge N
3/4" 1 6
External E Dial Gauge 3
Series Type Thread Type G
(standard)
Standard P3 Safety Redundant D
BSPP 1 Output for Solenoid, Output for Sensors, Digital
(no soft start) M12 Connector Pin M12 Connector Pin D
NPT 9 Gauge 3
Safety Redundant 2 & 4, Common 3 A 1 & 2, 1 & 4, Common 3 A MPS-P34
T
(c/w soft start) Pressure M
3&4 C 1 & 2, 5 & 4, Common 3 B
Sensor
2&4 D 5 & 2, 1 & 4, Common 3 C
Notes:
1. For 1/2" connections use 1/2" port blocks on standard 3/4" housing.
2. Safety valve supplied with 1/8" gauge port in either BSPP or NPT
threads as specified for ports. Gauges shipped loose. Note: Mounting hardware and port blocks are sold separately.
3. Dial or digital gauge not available on BSPP version.

Most popular.

For inventory, lead

Catalog 0760P 66 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Safety Exhaust Valves Air Preparation

General Technical Data Mounting Hardware

Valve type Externally monitored, redundant, dual poppet Body Connector P32KA00CB
Soft start Optional T-Bracket w / Body Connector P32KA00MT
Valve function 3/2 way, normally closed T-Bracket (fits to body connector or port block) P32KA00MB
Housing material Cast aluminum Port Block Kits (includes two) 1/2" NPT P32KA94CP
Seals NBR 1/2" BSPT P32KA24CP
1/2" BSPP P32KA14CP
Fasteners Stainless steel / brass
3/4" NPT P32KA96CP
Silencer Steel, non clog safety design
3/4" BSPT P32KA26CP
3/4" BSPP P32KA16CP
Electrical Specifications
Operating voltage 24V DC
Electrical connection Two M12 connectors
Switching time 1-2 (ms) 23.3
Solenoid M12 Pinouts
Switching time 2-3 (ms) 42.7 A C D
1 1 1
Sol B Sol A
Duty cycle (%) 100% Sol B +
2 5 4
+ Sol A
2 5 4
+ 2 5 4
+
Sol B Sol A

3 3 3
Operating voltage (DC) 21.6 to 26.4 - - -

Nominal power
per solenoid coil at 24V DC (W) +/- 10% 1.2 W
per pressure sensor at 24V DC 1.2 W
Pressure Sensor M12 Pinouts
In accordance with EN ISO 13849-1 this safety valve is suitable for use up to
A B C
Category 4, Ple, sil 3. Certified to cCSAus and bears the CE mark. + + + + +

A product Integration Guide is available to help connect your logic controller SW

1

4 SW SW 2
1

5 4 SW SW
1
SW
2 5 2 5 4
to the Parker Safety Exhaust Valve under the Product Support tab at www. A
3
B A
3
B A
3
B

parker.com/pdn/safetyvalve - - -

Externally Monitored (with Soft Start)

Externally Monitored (No Soft Start)

E A

D D
B C B C

Dimensions inches (mm)

Standard nominal flow rate
Ports 1 → 2 L/min (SCFM)* 2 → 3 L/min (SCFM)* A B C D E F
Externally Monitored 10.31 3.15 4.30 1.44 6.39 0.64
with soft start 3/4" 4,100 (145) 7,500 (265) (261.9) (80) (109.3) (36.5) (162.3) (16.3)
Externally Monitored 7.03 3.15 4.30 1.44 3.11 0.64
no soft start 3/4" 4,300 (152) 7,500 (265) (178.7) (80) (109.3) (36.5) (79.0) (16.3)
* Standard nominal flow rate is based on 6 bar input pressure with ∆P = 1 bar

Catalog 0760P For inventory, lead

67 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Safety Exhaust Valves Air Preparation
Safety Exhaust Valve Function
When applications demand a safe environment you can count on safety valves Cat 3, PL d
from Parker Hannifin. The P33 family of safety exhaust valves are 3/2 normally
closed valves designed to rapidly exhaust compressed air in the event of a fault
condition and to provided monitored coverage ensuring safe function. The P33
is available in two distinct styles, internally* or externally monitored. The valve
is suitable for use up to Category 4, performance level e. Monitoring is achieved
externally via a two channel system connected to a safety interface device. PLC for
Both valves are available with an adjustable soft start and high flow exhaust external
Safety
to shut your equipment down faster when needed. LED’s provide clear status relay
monitoring
of main solenoid operation, sensor power and fault condition for quick visual
reference.
Externally Monitored Valve, Faults and Resets Reset button

The externally monitored valve has the monitoring done via a PLC or relay
which offers a size and cost advantage over internally monitored valves. The
integration of a safety interface into the PLC or relay will help determined the Cat 4, PL e
achievable category and performance level of the control system. Customers
are required to provide the logic function via the safety device. The valve will
lock-out to the “safe state” if asynchronous movement of the valve elements
occur which will be detected by solid state pressure sensors. To achieve the
proper safety rating, the safety PLC or relay must monitor the solid state
pressure sensors to ensure they are not in different states for more than
Safety
150ms. If the sensors are in different states for longer than 150ms then the
relay
programming logic must shut off power to the solenoids and consider it a
fault condition. If during operation the externally monitored P33 enters a fault Safety
PLC
condition the valve will shut off. A separate reset signal must be incorporated
into the logic sequence to avoid automatic restart of the valve. The safety
exhaust valves are not for use with clutch or brake applications and are
designed for use in conjunction with a safety relay or safety PLC for safe Reset button
monitoring and fault detection.
Achieving Desired Performance Level **
The category and performance level (PLr) needed for your machine is
determined by a risk assessment of the machinery design and application * For information on internally monitored safety valves
based on EN ISO 13849-1. The Parker P33 safety valve is designed for those reference Bulletin 0700-B13.
applications requiring a PL of d or e. Please note these levels require other ** An integration guide is available to provide further
aspects of the system to meet these requirements. As a guide: you can achieve information on connecting the safety valve product to
a Cat 4 PL e system by integrating monitoring via a programmable safety rated achieve the desired performance level. Please consult
device. Because the P33 is a mechanical fail-safe device, the monitoring could Parker and the standard EN ISO 13849-1 for more infor-
also be done via a standard PLC and still attain as high as a PL d rating. mation.

Conditions at Start
B A The Safety exhaust valve starts with inlet 1 closed to outlet 2 by both valve elements A and B. Outlet 2 is open to exhaust 3.
Pressure signals at both sensors SA and SB are exhausted and contacts 1 and 2 of sensors SA and SB are connected. The
normally closed sensors both provide voltage feedback signals to the external monitoring system.
2
+ -
Output
1
+ -
Output
3 Normal Operation
SB SA
During normal operation the two solenoids are simultaneously energized which actuates both pilots and causes valve
elements A and B to shift. Inlet 1 is then connected to outlet 2 via crossflow passages C and D. Exhaust 3 is closed. Sensing
pressure signals go to each pressure sensor and become equal to inlet pressure. Both sensors contacts open and no
B A
CD voltage signals are provided to the external monitoring system. This indicates that both sides of the valve actuated as
expected.

+ - + - 3 Detecting a Malfunction
2 1
SB
Output
SA
Output
A malfunction in the system or the valve itself could cause one valve element to be open and the other closed. Air then
flows past the inlet poppet on valve element A, into crossflow passage D, but is substantially blocked by the spool portion
of element B. The large size of the open exhaust passage past element B keeps the pressure at the outlet port below 2%
B A of inlet pressure. Full sensing air pressure from side A goes to sensor SA, and a reduced pressure goes to sensor SB. This
CD
full pressure signal causes SA to open. Sensor SB, with a reduced pressure signal, does not open. An external monitoring
system can detect the malfunction by monitoring the outputs of the SA and SB sensors. The external monitor system must
+
then react accordingly by shutting down the power to the valve solenoids and any other components deemed necessary to
- + -
2
Output
1 Output
3
stop the machine.
SB SA

For inventory, lead

Catalog 0760P 68 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Safety Exhaust Valves Air Preparation

Machinery Directive - Overview

The Machinery Directives’ goal is to protect people and the environment from accidents caused from all types of machinery. Based on the standard EN
13849 [safety of machines; safety-related parts of control systems] these standards build the procedure to assess safety-related control systems.
Required Performance Level (PLr) based on a risk assessment are now commonly used to determine the safety level required for the controls system,
for the application of machinery.
Performance Level (PL) based on the original B, 1,2,3,4 safety categories, diagnostic capabilities, Mean time to dangerous failure (MTTFd), and common
cause failure (CCF), define safety levels of a given safety function. This ensures that safety is not just focused on component reliability, but instead in-
troduces common sense safety principles such as redundancy, diversity, and fail-safe behavior of safety related control parts.
The new EN 13849 standards of the Machinery Directive dictates the machine is safe when the Performance Level of the safety control circuit is equal
to or greater than the Required Performance Level of the application. When determining the required performance level, the greater the risk, the higher
the requirements of the control system.

PLr < PL

Determining PLr According to EN 13849-1 Determining PL According to EN 13849-1

The level of each hazardous situation is classified in five
Performance levels from a to e. With PL a the control functions
contribution to risk reduction is low, while at PL e it is high. The risk
graph above can be used as a guideline to determine the required
performance level PLr for safety function.

Categories Defined by EN 13849-1

Category Summary

Category B When a fault occurs it can lead to the loss of the

safety function.
Risk Parameters
Category 1 Same that Category B, but loss of the safety function
is less likely thanks to a good MTTFd of each channel.

Category 2 System behavior allow that the occurrence of a fault

can lead to the loss of the safety function between the
checks; the loss of the safety function is detected by
the check.

Category 3 A single fault in any of safety related parts does not

lead to the loss of the safety function. Whenever
reasonably possible the single fault shall be detected
at or before the next demand upon the safety function.
(Means redundancy)

Category 4 Same as Category 3, but if detection of single fault is

not possible on or before the next demand upon the
safety, an accumulation of these undetected faults
shall not lead to the loss of the safety function. (Means
redundancy & check)

Catalog 0760P For inventory, lead

69 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

Ball Valve / Lockout Valve

The Ball / Lockout Valve shuts off downstream line pressure
in the closed position with a 90° turn of the handle. In the
closed position, inlet air pressure is blocked and downstream
/ system air is exhausted through a threaded port. To prevent
unauthorized adjustment, the padlock slide may be assembled
on either side. It is recommended that this slide is installed after
final system assembly.

The Safety Lockout valves conform to OSHA #29 CFR part 1910
— control of hazardous energy source (lockout / tagout).

Note: This padlock slide is a permanent assembly and may not be

removed later, any unauthorized tampering will void any
warranty claims. The valve can only be locked in the closed
position.

Operating Information
Operating temperature: -40°C to 80°C (-40°F to 176°F)
Pressure supply (max): 250 psig (17 bar)
Port size:
Ordering Information BSPP / BSPT / NPT 1/4, 3/8, 1/2, 3/4
Modular Ball Weight: P31 0.33 lbs (0.15 kg)
Model Port Exhaust Thread Flow scfm Valve Flow from P32 0.79 lbs (0.36 kg)
Type Size Port Type (dm3/s, ANR) Left to Right P33 1.21 lbs (0.55 kg)
P31 1/4" 1/4" NPT 42.4 (20) P31VB92LBNN
P32 3/8" 1/4" NPT 190.7 (90) P32VB93LBNN
1/2" 1/4" NPT 258.5 (122) P32VB94LBNN
Material Specifications
P33 1/2" 1/2" NPT 561.5 (265) P33VB94LBNN Body Aluminum
Seals PTFE
3/4" 1/2" NPT 678 (320) P33VB96LBNN
Ball Stainless Steel
* Lockout tab and muffler supplied with unit.
For thread type: BSPP 1 Lockout Tab Zinc Plated Steel
BSPT 2 Screw Zinc Plated Steel
NPT 9

Dimensions inches (mm)

P31 P32 P33

2.87
2.36 (73)
(60) 1.43
1.18 (36.5)
(30)
1.65 1.43
(42) 1.18 (36.5)
(30) 2.87
0.78 (2.36 (73)
(20) (60)
1.57
(40)

3.25
2.87 (82.6)
0.82 1.96 (73)
(21) (50)

(
3.46 3.87
2.81 (88) (98.4)
(71.4)

1.00 1.44
0.84 (25.4) (36.5)
(21.4)
1/4 Thread 1/4 Thread 1/2 Thread
Port Port Port

Most popular.

For inventory, lead

Catalog 0760P 70 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

Manifold Blocks
• Available in 1/4" or 3/4" threaded inlet / outlet ports
• Two additional top and bottom auxiliary ports standard
• Can be mounted anywhere in the FRL system

Ordering Information
Operating Information
Auxiliary Auxilliary
Model In / Out Port Size Port Size Thread Operating temperature: -40°F to 150°F (-40°C to 65.5°C)
Type Port Size Top Bottom Type Part Number Pressure supply (max): 300 psig (20.7 bar)
P31 1/4" 1/4" 1/4" NPT P31MA92022N Weight: P31 0.26 lbs (0.12 kg)
P32 1/2" 1/4" 1/2" NPT P32MA94024N P32 0.45 lbs (0.20 kg)
P33 0.45 lbs (0.20 kg)
P33 3/4" 1/4" 1/2" NPT P33MA96024N
For thread type: BSPP 1
BSPT 2
NPT 9
Material Specifications
Body Aluminum

Dimensions inches (mm)

P31 P32 P33
Outlet Port
Top Port 3/4"
1/4"
Outlet Port
Top Port 1/2" Inlet Port 2.88
1/4" 3/4" (73)
Inlet Port
0.79 1.66 1/2" 2.36 1.44
(20) (42) (60) (36.5)

1.58 1.30
Top & 0.94 1.18 (33)
Inlet (40)
Outlet Bottom (23.9) 2.60
1.88 (30)
Port Port Aux. Ports (66)
1/4" 1/4" 0.74 1/4" (47.8)
FLOW
(19) 0.94
1.61 1.58 1.88 (23.9) 1.88
(41) (40) (47.8) (47.8)
0.94
(23.9)
Bottom Port
1/2"
Bottom Port
1/2"

Most popular.

Catalog 0760P For inventory, lead

71 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

PPS1 Pressure Switch

• Long life elastomer diaphragm
3 (Normally Open)
• High quality snap action switch



1
• Field adjustable

(Common) 2 (Normally Closed)

• Compact design
• Easily customized
• Quick delivery
• NEMA 4, 13
Definitions and Terminology
Repeatability — Accuracy is the maximum allowable set point
deviation of a single pressure or temperature switch under one
given set of environmental and operational conditions. Operating Information
Single Pole Double Throw (SPDT) Switching element — Temperature range: -40°F to 105°F (-40°C to 220°C)
A SPDT switching element has one normally open, one normally Operating pressure range: 1, 2, 3 - 250 PSI (17.2 bar)
closed and one common terminal. Three terminals mean that the 4 - 2000 PSI (137.9 bar)
switch can be wired with the circuit either normally open (NO), or Set point tolerance ±1 PSI or 5% (.07 bar)
normally closed (NC), or both. Deadband 10 - 20% of set pressure
Dead Band — The dead band, sometimes referred to as Current rating 3A @ 125 VAC
2A @ 30 VDC (Resistive)
“differential” or “hysteresis”, is the change in pressure between
actuation and deactuation set points. Circuit form SPDT Standard
Cycle life 1 Million

Ordering Information:

PPS1 - 1 C 3 - R HM
Thread Set Point Direction Electrical Connection
1/4" NPT Male 1 R Rising HM DIN 9.4mm
1/8" NPT Male 2 WL Wire Leads 18"
1/4" BSPP Male 17 Range*
1/8" BSPP Male 18 * Factory setting for calibration purposes
1 3-10 PSI
Range 1 = 6 PSI
2 6-30 PSI
Circuit Range 2 = 18 PSI
3 20-120 PSI Range 3 = 70 PSI
SPDT C
4† 100-400 PSI Range 4 = 250 PSI
†
Only available in 1/4" NPT
Note: Switch is field adjustable.

Material Specifications
Adjustment knob Anodized aluminum
Wire Configuration
Body Brass Top View DIN Pin 1 - Common (Black)
Pin 2 - N.C. (Blue)
Diaphragm Nitrile 3 Pin 3 - N.O. (Red)
1.50 2 1 1.20 Ø
(38.1)
GND
(30.5)
Operation Pin Configuration 18" Leads
Pin 1 - Common (Black)
The pressure switch monitors Pin 2 - N.C. (Blue)
the air pressure in your Pin 3 - N.O. (Red)
2.50
pneumatic system. When the (63.5) 2.30
(58.4)
pressure in your system either Max.
Max.
drops below or exceeds the set
point pressure, an electrical
1-1/8 Hex 1-1/8 Hex
output is given.
1/8-27 NPT 1/4-18 NPTF

For inventory, lead

Catalog 0760P 72 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

P31 Accessories
C-Bracket T-Bracket w/ Body Connector
(Fits to filter and lubricator body) (O-ring not shown)
P31KA00MW 2.68 P31KA00MT
0.28
(68) (7)
1.67 0.39
(42.5) 0.26 (10) 0.22
0.39 (6.6) (5.5)
(10)
1.40
(35.5)
0.76 Dia
(19.3) 3.54
2.44 (90)
0.08
(62) (2)

2.36 1.57 0.63

(60) (40) (16)
1.57
(40) 0.39
(10)

Body Connector Port Block Kit

(O-ring not shown) (O-ring not shown)
P31KA00CB 1/8 NPT.......................... P31KA91CP 1/8 BSPT...................... P31KA21CP
1/4 NPT ......................... P31KA92CP 1/4 BSPT .................... P31KA22CP
3/8 NPT.......................... P31KA93CP 3/8 BSPT...................... P31KA23CP
1/8 BSPP....................... P31KA11CP
0.39
1/4 BSPP....................... P31KA12CP
(10) 3/8 BSPP....................... P31KA13CP

1.42
(36)

0.94
(24)

Port Block Kit w/ T-Bracket Angle Bracket

(O-ring not shown) (Fits to regulator and filter/regulator body)
1/8 NPT........................ P31KA91CN 1/8 BSPT......................P31KA21CN P31KB00MR
1/4 NPT ....................... P31KA92CN 1/4 BSPT ....................P31KA22CN
3/8 NPT........................ P31KA93CN 3/8 BSPT......................P31KA23CN 2.67
1/8 BSPP..................... P31KA11CN (68) 0.27
1/4 BSPP .................... P31KA12CN 1.73 (7)
(44)
3/8 BSPP..................... P31KA13CN
0.67
(17) 1.20 Dia.
0.98 (30.4)
(25)
1.57
(40)
2.40
(61)

Catalog 0760P For inventory, lead

73 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

P32 Accessories
T-Bracket w/ Body Connector Body Connector
P32KA00MT P32KA00CB

0.35
0.35 (8.9)
(8.9)
O-Ring
O-Ring

O-Ring
O-Ring 0.87 Dia.
(22.1)
0.87 Dia.
(22.1)

Port Block Kit Angle Bracket

1/4 NPT............................P32KA92CP 1/4 BSPT........................ P32KA22CP (Fits to regulator and filter/regulator bonnet)
3/8 NPT............................P32KA93CP 3/8 BSPT........................ P32KA23CP
P32KB00MR
1/2 NPT............................P32KA94CP 1/2 BSPT........................ P32KA24CP
3/4 NPT............................P32KA96CP 3/4 BSPT........................ P32KA26CP 2.74
1/4 BSPP ........................P32KA12CP (69.6)
3/8 BSPP.........................P32KA13CP 1.66
(42.2)
1/2 BSPP.........................P32KA14CP
0.54 0.28
3/4 BSPP.........................P32KA16CP (13.7) (7.15)
0.37
(9.5) 1.91 Dia
1.11 (48.5)
(28.3)

2.83
(72)
1.57 1.57
(40) (39.9)

L-Bracket T-Bracket
(Fits to filter and lubricator body) (fits to body connector or port block)
P32KA00ML P32KA00MB
2.74
0.75 0.29 (Typ.)
(69.5)
(19) (7.5)
0.54 0.28
(14) 1.66
(42) (7.1)
0.38
(9.6) 2.25
(57) Dia
1.10 1.00
(28)
4.53 (25.4)
0.88 (115)
2.84 (22)
(72) 0.28
1.26 (7.0)
(32)

0.79
(20)

For inventory, lead

Catalog 0760P 74 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

P33 Accessories
T-Bracket w/ Body Connector Body Connector
P32KA00MT P32KA00CB

0.35
0.35 (8.9)
(8.9)
O-Ring
O-Ring

O-Ring
O-Ring 0.87 Dia.
(22.1)
0.87 Dia.
(22.1)

Port Block Kit Angle Bracket

1/4 BSPT........................ P32KA22CP (Fits to regulator and filter/regulator bonnet)
1/4 NPT............................P32KA92CP
3/8 NPT............................P32KA93CP 3/8 BSPT........................ P32KA23CP P33KA00MR
1/2 NPT............................P32KA94CP 1/2 BSPT........................ P32KA24CP
2.99
3/4 NPT............................P32KA96CP 3/4 BSPT........................ P32KA26CP (76)
1/4 BSPP ........................P32KA12CP 1.89
3/8 BSPP.........................P32KA13CP (48)
1/2 BSPP.........................P32KA14CP 0.55
(14) 2.40
3/4 BSPP.........................P32KA16CP (61)
0.43
(11) 2.40 Dia
0.98 (61)
(25)

3.33
(84.5)
1.92
1.57 (49)
(40)

L-Bracket T-Bracket
(Fits to filter and lubricator body) (fits to body connector or port block)
P33KA00ML P32KA00MB
76
(3.00) 0.75 0.29 (Typ.)
14 48 7.1 (19) (7.5)
(.56) (1.88) (.28)
9.6
(.38)
67.5 Dia
28 (2.66)
(1.10)
1.00
28 4.53 (25.4)
87 (1.10) (115)
(3.44)
38
(1.49) 0.28
(7.0)

0.79
(20)

Catalog 0760P For inventory, lead

75 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

Series Description Part Number

P31 P31KA00MP
P32 Panel Mount Nut (Plastic) P32KA00MP
P33 P33KA00MP

P31 P31KA00MM
P32 Panel Mount Nut (Aluminum) P32KA00MM
P33 P33KA00MM

P31 P31KA00ESE
P32 5µ Element Kit P32KA00ESE
P33 P33KA00ESE

P31 P31KA00ES9
P32 1µ Element Kit P32KA00ES9
P33 P33KA00ES9

P31 P31KA00ESC
P32 0.01µ Element Kit P32KA00ESC
P33 P33KA00ESC

P31 P31KA00ESA
P32 Adsorber Element Kit P32KA00ESA
P33 P33KA00ESA

P32 / P33 Auto Drain Kit P32KA00DA

P31 P31KB00RQ
Differential Pressure Indicator Kit
P32 / P33 P32KA00RQ

P31 / P32 / P33 Drip Control Assembly Kit P32KA00PH

P31 P31KA00PL
Fill Plug Kit
P32 / P33 P32KA00PL

P31 P31KB00BGN
P32 Lubricator - Plastic Bowl w/ Bowl Guard No Drain P32KB00BGN
P33 P33KA00BGN

For inventory, lead

Catalog 0760P 76 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

Series Description Part Number

P31 P31KB00BMN
P32 Lubricator - Metal Bowl w/o Sight Gauge No Drain P32KB00BMN
P33 P33KA00BMN

P32 P32KB00BSN
Lubricator - Metal Bowl w/ Sight Gauge No Drain
P33 P33KA00BSN

P31 P31KB00BMM
P32 Metal Bowl w/o Sight Gauge & Manual Drain P32KB00BMM
P33 P33KA00BMM

P31 Metal Bowl w/o Sight Gauge & Pulse Drain P31KB00BMB

P32 P32KB00BMA
Metal Bowl w/o Sight Gauge & Auto Drain
P33 P33KA00BMA

P32 P32KB00BSM
Metal Bowl w/ Sight Gauge & Manual Drain
P33 P33KA00BSM

P32 P32KB00BSA
Metal Bowl w/ Sight Gauge & Auto Drain
P33 P33KA00BSA

P31 P31KB00BGM
P32 Plastic Bowl w/ Bowl Guard & Manual Drain P32KB00BGM
P33 P33KA00BGM

P31 Plastic Bowl w/ Bowl Guard & Pulse Drain P31KB00BGB

P32 P32KB00BGA
Plastic Bowl w/ Bowl Guard & Auto Drain
P33 P33KA00BGA

P33 Regulator - Relieving Repair Kit P33KA00RB

P33 Regulator - Non-Relieving Repair Kit P33KA00RC

Catalog 0760P For inventory, lead

77 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

Series Description Connection Part Number

P33 Regulator - Main Adjusting Spring 0-30 psig (0-2 bar) Kit P33KA00PR

P33 Regulator - Main Adjusting Spring 0-60 psig (0-4.1 bar) Kit P33KA00PS

P33 Regulator - Main Adjusting Spring 0-125 psig (0-8.6 bar) Kit P33KA00PT

P33 Regulator - Main Adjusting Spring 0-250 psig (0-17 bar) Kit P33KA00PV

0-60 psig P31KA060XB

0-160 psig P31KA160XB
0.59
0-290 psig P31KA290XB (15)

0-4 bar P31KA04BXB 1.06

(27)

P31 Square Guage 0-11 bar P31KA11BXB

0-20 bar P31KA20BXB 1.06
(27)

0-0.4 MPa P31KA04MXB

0-1.1 MPa P31KA11MXB
0-2.0 MPa P31KA20MXB

0.59
0-60 psig K4511SCR060 (15)

Square Flush 0-160 psig K4511SCR160 1.06

P31 (27)

Mounting Gauge Kit 0-4 bar K4511SCR04B

0-11 bar K4511SCR11B 1.06
(27)

0-60 psig P6G-PR90060

Square Mounting Gauge 0-160 psig P6G-PR90160
P31 / P32
with Adapter Kit 0-4 bar P6G-PR10040
0-11 bar P6G-PR10110

0-60 psig / 0-4.1 bar 1/8" K4510N18060 0.63

1.25
P31 1" Round Gauge (16)
(32)

0-160 psig / 0-10 bar 1/8" K4510N18160 0.75

(19)

0-30 psig / 0-2 bar 1/8" K4515N18030

40mm Round Gauge 1.57
K4515N18060
0.63
P31 0-60 psig / 0-4.1 bar 1/8" (16)
0.98
(40)

K4515N18160
(25)
0-160 psig / 0-10 bar 1/8"

0-30 psig / 0-2 bar 0-60 1/4" K4520N14030

psig / 0-4.1 bar 1/4" K4520N14060 0.71
1.97

P32 / P33 50mm Round Gauge (18)

(50)

0-160 psig / 0-10 bar 1/4" K4520N14160 0.94

(24)

0-300 psig / 0-20 bar 1/4" K4520N14300

P31 Body Connector O-ring (Replacement kit) P31KA00CY

P32 / P33 (Pack of 10) P32KA00CY

P31 P31KB00AL
Tamperproof Lockable Kit
P32 P32KB00AL

For inventory, lead

Catalog 0760P 78 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation

Solenoid Operators - CNOMO

Solenoid Operators, Coil Combinations Transients
NC Normal Operator NC Normal Operator Interrupting the current through the solenoid coil produces
with 22 x 30 with 30 x 30 momentary voltage peaks which, under unfavorable conditions,
standard coil standard coil
can amount to several hundred times the rated operating
Working pressure 0 to 10 bar 0 to 10 bar voltage. Normally, these transients do not cause problems, but to
Ambient temperature -10°C to 60°C * -10°C to 60°C * achieve the Maximum life of relays in the circuit (and particularly
of transistors, thyristors and integrated circuits) it is desirable
Power (DC) 4.8W 2.7W
to provide protection by means of voltage-dependent resistors
Power (AC) 8.5VA 4.9VA (varistors). All connectors/cable plugs EN175301-803 with LED’s
Voltage tolerance +/-10% +/-10% include this type of circuit protection.
Duty cycle 100% 100%
Insulation class F F
Electric connection B Industrial DIN 43650A
Materials
Protection IP65 IP65
Pilot Valve
Approval UL/CSA
Body: Polyamide
Working media All neutral media such as compressed air
Armature tube: Brass
* Limited to 50°C if use with 100% duty cycle
Plunger & core: Corrosion resistant Cr-Ni steel
Seals: Fluorocarbon
Screws: Stainless steel
P31 Series only - Solenoid coils 15mm NC Coil
Order code Encapsulation material: Thermoplastic as standard
Override, blue, Duroplast for M12 connection
Non-Locking Weight
Voltage Flush (kg)
‰
1
0

‰
1

24VDC PS2982B49P 0.038

115VAC 50Hz / PS2982B53P 0.038

Spare Base Solenoid Pilot Operator
120VAC 60Hz CNOMO NC
Part Number
Non-Lock
Manual Weight
Solenoid Coils with M12 Connection Description Override (kg)
Standard Duty P2FP23N4B 0.065
Weight
No Override P2FP23N4A 0.065
Voltage Part Number (kg)
Note: Solenoid pilot operators are fitted to the Global range. Order the above
Direct current part numbers for spares. The operators are supplied with mounting
24VDC P2FC6449 0.065 screws and interface ‘O’ rings. Coils and connectors must be ordered
separately.

Solenoid Coils with DIN A or Industrial B Connection

22mm x 30mm 30mm x 30mm
Part Number Part Number
B Industrial Weight DIN 43650A Weight
Voltage Standard (kg) Standard (kg)
Direct current
24VDC P2FCB449 0.093 P2FCA449 0.105
Alternative current
110V 50Hz, 120V 60Hz P2FCB453 0.093 P2FCA453 0.105

Most popular.

Catalog 0760P For inventory, lead

79 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories Air Preparation
Solenoid Connectors / Cable Plugs EN175301-803
Part Number Part Number
22mm Form B 30mm Form A
Description Industrial DIN 43650A
With standard screw Standard IP65 without flying lead PS2429BP PS2028BP
With LED and protection 24VAC/DC PS243079BP PS203279BP
With LED and protection 110VAC PS243083BP PS203283BP

With cable Standard with 2m cable IP65 PS2429JBP PS2028JCP

24VAC/DC, 2m cable LED and protection IP65 PS2430J79BP PS2032J79CP
110VAC/DC, 2m cable LED and protection IP65 PS2430J83BP PS2032J83CP

Solenoid Coil Dimensions inches (mm) Electrical Schematics

15mm 22 x 30mm
0.93
(23.62)
1.18 0.86
0.59
1

(30) (22)
0

(15)
1

0.13 1.61
1.00 (3.4)
(25.4) 1.77 (41) 1.30 PS2028BP PS243079BP PS203279BP
(45) 1.22 (33)
(31) PS2028JBP PS2430J79BP PS2032J79CP
1.57
(40) PS2429BP PS243083BP PS203283BP
0.87
2.01 (22) PS2429JBP PS2430J83BP PS2032J83CP
30 x 30mm 2.36 (51)
(60) PS2932BP PS294679BP PS294683BP

1.18
PS2932JBP PS2946J79BP PS2946J83BP
(30)

1.89
(48)
1.42 1.22
(36) (31)

0.87
2.05 (22)
2.36 (52)
(60)

Cable Plug Dimensions inches (mm)

22mm Form B Industrial 30mm DIN 43650A
PS2429BP PS2028BP
Cable plugs Cable plugs

1.57
(40)
1.22
(31)
1.18
(30)
1.65
1.87 (42)
(47.5)
0.22 1.22
(5.5) (31)
1.18
0.82 (30) 1.26
(32)
(20.8)

M3 1.22 0.20
(31) (5)
Most popular.

For inventory, lead

Catalog 0760P 80 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Features P3Y Series

P3Y System
The P3Y system allows units to be connected together The P3Y regulators are designed to provide quick response
without the use of pipe connectors. This saves space, and accurate pressure regulation for the most demanding
provides constant mounting centers, and maintains a modern hi-flow industrial applications.
aesthetically pleasing appearance. The rolling diaphragm was designed for long trouble-free
The P3Y filters are specially designed to efficiently filter out operation and will not rupture or tear under high cycle
rust, dirt, moisture and other impurities from compressed or demanding applications. The P3Y mist lubricators are
air lines. Operation is fully automatic with a minimum of designed to provide lubrication for many general purpose
pressure drop. Coalescing filters and adsorber filters for high applications.
purity air are also included in the P3Y series.

Neck mounting nut

Neck mounting bracket

Non rising con-

trol knob
5 micron filter
element as Regulator
standard All units body ported Constant density
lubrication
Nitrile ‘O’
ring seal Wall mounting
bracket

Wall mounting
bracket

Body Lubricator can

Flow connector
directional be filled under
kit pressure to
arrows Metal bowl with eliminate down-
chemical resistant time
sight glass

Combined manual /
semi-auto drain &
auto drain options

Catalog 0760P For inventory, lead

81 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Particulate Filter P3Y Series

P3Y Particulate Filter

• Integral 3/4" or 1" ports (NPT & BSPP)

• High efficiency particulate element as standard

• Excellent water removal efficiency

• Robust but lightweight aluminium construction

• Low temperature -40°C (-40°F) with combined manual / semi-
auto drain as standard

1 2 1 2

Operating Information
Manual drain Auto drain
Supply pressure (max)*: 254 psig (17.5 bar)
Operating temperature:
Auto drain 14°F to 140°F (-10°C to 60°C)
Combined drain -40°F to 140°F (-40°C to 60°C)
Standard filtration 5 micron
Port
Manual / semi-auto drain: Closed at 11.6 psig (0.8 bar)
Size Description Part Number
G1/8 thread male
3/4" Combined Manual /Semi-Auto Drain P3YFA96ESCN Auto drain bowl pressure: Closed at 11.6 psig (0.8 bar)
3/4" Auto Drain P3YFA96ESAN Bowl capacity: 4.4 US oz. (130 cm3)
1" Combined Manual /Semi Auto Drain P3YFA98ESCN Standard filtration: 5 micron
1" Auto Drain P3YFA98ESAN Flow capacity : †
3/4" 170 scfm (80.2 dm3/s, ANR)
1" 170 scfm (80.2 dm3/s, ANR)
Fluid: Compressed air
Weight: 1.98 lb (0.9 kg)
†
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar)
pressure drop.
* Air supply must be dry enough to avoid ice formation at temperatures below
35.6°F (2°C).

Air quality:
Within ISO 8573-1: 1991 Class 3 and 5 (Particulates)
Within ISO 8573-1: 2001 Class 6 and 7 (Particulates)

Ordering Information:

P3YFA 9 6 E SC N
Basic Series Thread Type* Port Size Element Drain Type
Filter P3YFA BSPP 1 3/4 6 E 5 micron Combined
NPT 9 1 8 SC Manual / Semi-
Auto Drain
* Note: For 1-1/2" ported unit, please order P3YKA*BCP port block kit SA Auto drain
separately.

Most popular.

For inventory, lead

Catalog 0760P 82 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Particulate Filter P3Y Series

Material Specifications Flow Characteristics

Body Aluminium
Sight glass and bowl Polypropylene (3/4") Filter
Body cover ABS Primary Pressure - bar 2.5 6.3 10
Primary Pressure - psig 36.2 91.4 145
12
Element Sintered P.E. 0.75

10
Seals Nitrile NBR 0.60

Pressure Drop - (bar)

Pressure Drop - (psig)
8
Manual / semi-auto drain Acetal 0.45
6
Automatic drain PA / Ø 10mm
0.30
brass connection 4

2 0.15

Repair and Service Kits 0 0

0 10 20 30 40 50 60 70 80 90 100 120 140 160 180 200
Flow - (dm 3/s)
5 micron element kit P3YKA00ESE n

50 100 150 200 250 300

40 micron element kit P3YKA00ESG 0
Flow - (scfm)

Bowl kit with combined manual / semi auto drain P3YKA00BSC

Bowl kit with auto drain P3YKA00BSA
(1") Filter
Primary Pressure - bar 2.5 6.3 10
Primary Pressure - psig 36.2 91.4 145
12 0.75
10
0.60

Pressure Drop - (bar)

Pressure Drop - (psig)
8
0.45
6

0.30
4

2 0.15

0 0
0 10 20 30 40 50 60 70 80 90 100 120 140 160 180 200
Flow - (dm 3/s)
n

0 50 100 150 200 250 300

Flow - (scfm)

6.69
(170)

2.40 1.85 5.51

(61) (47) (140)

0.01 3.54 0.35

(2.5) (90) (9)

1.57
(40) 1.97
(50)

9.92 0.39
(252) (10)
8.45
(212)

Min. 3.15 (80mm)

for filter changing G1/8 male

Inches (mm)

Catalog 0760P For inventory, lead

83 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Coalescing Filter P3Y Series

P3Y Coalescing Filter

• Extended high efficiency filter element provides greater
filtration surface area.
• Integral 3/4" or 1" ports (BSPP & NPT)
• Removes liquid aerosols and sub micron particles
• Oil free air for critical applications, such as air gauging,
pneumatic instrumentation and control
• Adsorber activated carbon element removes oil vapors and
most hydrocarbons
• Robust but lightweight aluminum construction

Notes: To optimize the life of the coalescing element, it is advisable to

install a P3YFA pre-filter with a 5 micron element upstream of the
coalescing filter.
To optimize the life of the adsorber element, it is advisable to
install a P3Y coalescing 0.01 micron filter upstream of the Operating Information
adsorber filter.
Supply pressure (max)*: 254 psig (17.5 bar)
Operating temperature: 14°F to 140°F (-10°C to 60°C)
Manual / auto drain: Closed at 11.6 psig (0.8 bar)
G1/8 thread male
Media specifications:
Adsorber, max oil carryover 0.008 mg/m3 (PPM w/w)
Port
Size Description Part Number Bowl capacity: 4.4 US oz. (130 cm3)

Coalescing Filter 0.01 micron, Standard filtration: 0.01 micron

3/4"
Combined Manual / Semi-Auto Drain
P3YFA96DSCN
Flow capacity†: 3/4" 275 scfm (176.9 dm3/s, ANR)
1" 307 scfm (144.8 dm3/s, ANR)
Coalescing Filter 0.01 micron,
3/4"
Auto Drain
P3YFA96DSAN Fluid: Compressed air
Coalescing Filter 0.01 micron, Weight: 3.5 lb (1.6 kg)
1"
Combined Manual / Semi-Auto Drain
P3YFA98DSCN †
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar)
pressure.
Coalescing Filter 0.01 micron,
1"
Auto Drain
P3YFA98DSAN * Air supply must be dry enough to avoid ice formation at temperatures below
35.6°F (2°C).

Ordering Information:

P3YFA 9 6 D SC N
Basic Series Thread Type* Port Size Element Drain Type
Coalescing BSPP 1 3/4 6 0.01 micron Combined
P3YFA
Filter NPT 9 1 8 D Element with DPI SC Manual / Semi
Standard Auto Drain
A Adsorber SA Auto Drain

* Note: For 1-1/2" ported unit, please order P3YKA*BCP port block kit
separately.

Most popular.

For inventory, lead

Catalog 0760P 84 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Coalescing Filter P3Y Series

Material Specifications Flow Characteristics

Body Aluminium
Sight glass and bowl Polypropylene (3/4") 0.01 Micron Coalescing Filter Saturated
Primary Pressure - bar 2.5 6.3 10
Filter cover ABS Primary Pressure - psig 36.2 91.4 145
12
0.75
Coalescing element Borosilicate &
10
nano fibers 0.60

Pressure Drop - (psig)

Pressure Drop - (bar)

8
Top & bottom end cap (coalescing) Aluminium
0.45
6
Adsorber element Activated carbon
0.30
4
Top & bottom end cap (adsorber) Glass filled nylon
0.15
Support cylinders Grade 430 2

stainless steel 0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Support media Polypropylene Flow - (dm 3/s)
n

Anti re-entrainment barrier Polyester 0 100 200 300 400 500 600
Flow - (scfm)
Encapsulation Epoxy resin /
hardener
Seals Nitrile NBR (1") 0.01 Micron Coalescing Filter Saturated
Manual / semi-auto drain Acetal Primary Pressure - bar 2.5 6.3 10
Primary Pressure - psig 36.2 91.4 145
12
Auto drain PA / Ø 10mm 0.75

brass connection 10
0.60

Pressure Drop - (psig)

Pressure Drop - (bar)

Differential pressure indicator, body Acetal 8
0.45
Differential pressure indicator, internal parts Acetal 6

0.30
Differential pressure indicator, spring Stainless steel 4

Differential pressure indicator, seals Nitrile NBR 2 0.15

Differential pressure indicator, support plate ABS 0 0

0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Differential pressure indicator, screws Steel / zinc Flow - (dm 3/s)
n

plated 0 100 200 300 400 500 600

Flow - (scfm)

Repair and Service Kits

0.01 micron element kit P3YKA00ESC
Adsorber element kit P3YKA00ESA
Bowl kit with combined manual / semi auto drain P3YKA00BSC
Bowl kit with auto drain P3YKA00BSA 6.69
(170)
Differential pressure indicator kit P3YKA00RQ
5.51
1.85 (140)
2.40
(61) (47) 1.57 3.54 0.35
(40) (90) (9)
0.01
(2.5)

1.97
(50)

Coalescing
13.38
0.39
(340)
(10)
Adsorber
12.59
(320)

11.22
(285)

Min. 3.15 (80mm)

for filter changing G1/8 male

Inches (mm)

Catalog 0760P For inventory, lead

85 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Regulators P3Y Series

P3Y Regulators
• Integral 3/4" or 1" ports (BSPP and NPT)
• Robust but lightweight aluminium construction
• Secondary pressure ranges 12 and 16 bar
• Rolling diaphragm for extended life
• Secondary aspiration plus rolling diaphragm provides quick
response and accurate pressure regulation
• Optional tamperproof regulator padlock
• Reverse flow / relieving option
• Low temperature -40°C (-40°F)

3 3
1 2 1 2

Operating Information
Self relieving Reverse flow Non-relieving
regulator with gauge relieving regulator regulator Supply pressure (max)*: 254 psig (17.5 bar)
Operating temperature: -40°F to 140°F (-40°C to 60°C)
Flow capacity :†
3/4" 380 scfm (179.3 dm3/s, ANR)
1" 550 scfm (259.6 dm3/s, ANR)
Port Fluid: Compressed air
Size Description Part Number Gauge port (x2): 1/4"
3/4" 174 psig relieving P3YRA96BNEN Weight: 2.4 lb (1.08 kg)
P3YRA96BNFN Inlet pressure 145 psig (10 bar) inlet pressure, 91.4 psig (6.3 bar) set pressure
†
3/4" 174 psig relieving + pressure gauge
and 7.3 psig (0.5 bar) pressure drop.
1" 174 psig relieving P3YRA98BNEN * Air supply must be dry enough to avoid ice formation at temperatures below
35.6°F (2°C).
1" 174 psig relieving + pressure gauge P3YRA98BNFN

Ordering Information

P3YRA  9 6 B N E N
Basic Series Thread Type* Port Size Relief Lockable Adjustment Range
Regulator P3YRA BSPP 1 3/4 6 B Relieving N Standard 0 to 174 psi (0 to 12 bar), No
E
NPT 9 1 8 Reverse Flow / A† Lockable Gauge
R
Relieving 0 to 232 psi (0 to 16 bar), No
H
Gauge
Notes:
* For 1-1/2" ported unit, please order P3YKA*BCP port block kit separately. F 0 to 174 psi (0 to 12 bar), Gauge
† Not field convertible. J 0 to 232 psi (0 to 16 bar), Gauge

Most popular.

For inventory, lead

Catalog 0760P 86 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Regulators P3Y Series

Material Specifications Flow Characteristics

Body Aluminium
Bonnet Glass filled (3/4") Regulator
polyamide
9.0
Regulator cover ABS 120

Secondary Pressure - (bar)

7.5

Secondary Pressure - (psig)

8.0 bar
Control knob Glass filled 100
116 psig
6.0
polyamide 80
4.5 6.3 bar
Valve Brass / NBR 60 91.4 psig
3.0 4.0 bar
Seals Nitrile NBR 40
58 psig
1.5 2.5 bar
Screws Steel / zinc 20
36.3 psig
plated 0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340
Flow - (dm 3/s)
n

0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 600 640 680 720
Repair and Service Kits Flow - (scfm)

Angle bracket + metal lock ring P3YKA00MS

Panel mounting nut P3YKA00MM (1") Regulator
Diaphragm kit (relieving type) P3YKA00RR 9.0

Diaphragm kit (non-relieving type) P3YKA00RN 120 8.0 bar

Secondary Pressure - (bar)

7.5

Secondary Pressure - (psig)

116 psig
100
0 to 160 psig (0 to 10 bar), gauge 1/4" port K4520N14160 6.0
80 6.3 bar
0 to 300 psig (0 to 20 bar), gauge 1/4" port K4520N14300 4.5
91.4 psig
60
3.0
40 4.0 bar
1.5 2.5 bar 58 psig
20
36.3 psig
0 0
WARNING 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340
Flow - (dm 3/s)
n

Product rupture can cause serious injury. 0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 600 640 680 720
Do not connect regulator to bottled gas. Flow - (scfm)
Do not exceed Maximum primary pressure rating.

CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

3.54
(90)
2.17
(55) M64x2
0.39
2.40 3.11
(10)
(61) (79)

5.24 0.35
(133) (9) 2.36 0.32
(60) (5)
7.17 2.74
(182) (69.5)

1.93 1.34 1.56

(49) (34) (39.5)

1/4" gauge port 1/4" gauge port

Inches (mm)

Catalog 0760P For inventory, lead

87 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Pilot Operated Regulators P3Y Series

P3Y Pilot Operated Regulator

• Integral 3/4" or 1" ports (BSPP & NPT)
• Pilot controlled regulators can be mounted “out of reach”
with pilot regulator installed in a convenient location
• Constant pilot bleed control for accurate pressure control
• Balanced poppet provides quick response
• High flow

Operating Information
Supply pressure (max): 254 psig (17.5 bar)
Operating temperature: -40°F to 140°F (-40°C to 60°C)
Flow capacity : †
3/4" 550 scfm (259.6 dm3/s, ANR)
1" 550 scfm (259.6 dm3/s, ANR)
Port Fluid: Compressed air
Size Description Part Number
Weight: 2.6 lb (1.2 kg)
3/4" Pilot operated regulator P3YRA96BPPN †
Inlet pressure 145 psig (10 bar) inlet pressure, 91.4 psig (6.3 bar) set pressure
and 7.3 psig (0.5 bar) pressure drop.
1" Pilot operated regulator P3YRA98BPPN

Ordering Information

P3YRA 9 6 BPPN
Basic Series Thread Type* Port Size
Pilot Operated BSPP 1 3/4 6
P3YRA
Regulator NPT 9 1 8

* Note: For 1-1/2" ported unit, please order

P3YKA*BCP port block kit separately.

Most popular.

For inventory, lead

Catalog 0760P 88 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Pilot Operated Regulators P3Y Series

Material Specifications Flow Characteristics

Body Aluminium
Body cover ABS 3/4" and 1" Pilot Regulator
Valve Brass / NBR 9.0
composite 120 8.0 bar

Secondary Pressure - (bar)

7.5

Secondary Pressure - (psig)

116 psig
Pilot valve booster Aluminum 100
6.0
Seals Nitrile NBR 80
4.5 6.3 bar
60
Screws Zinc plated steel 3.0
91.4 psig
40
4.0 bar
20 1.5 2.5 bar 58 psig
36.3 psig
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340
Flow - (dm 3/s)
n

WARNING 0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 600 640 680 720
Flow - (scfm)

Product rupture can cause serious injury.

Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

1/8
0.75
(19)

pst
G1/8

3.54
(170)
5.52
(140)
2.40 ~3.11 3.54
(61) (79) (90)
0.35
2.22 (9)
(56.5)
1.95
(49.5)
4.15 1.97
(105.5) (50)
1.93
(49)
0.39
(10)

Inches (mm)

Catalog 0760P For inventory, lead

89 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Pressure Regulators P3Y Series

P3Y Proportional Pressure Regulator

• Integral 3/4" or 1" ports (BSPP & NPT)
• Accurate output pressure
• Very fast response times
• Robust but lightweight design

Port
Size Description Part Number
Normally Closed,
3/4" P3YPA96BD2VA2A
0 - 10 bar (0 to 145 psig)
Normally Closed,
1" P3YPA98BD2VA2A
0 - 10 bar (0 to 145 psig)

Operating Information
Operating pressure: P1 min 14.5 psig (1 bar) Power consumption: IBmax 0.15 A
Inlet pressure 1: P1 max 232 psig (16 bar) Set value input: Uw V 0-10
Operating pressure: P2 min 2.9 psig (0.2 bar) I mA 0-20
Outlet pressure P2 max 145 psig (10 bar) mA 4-20
Operating temperature: 32°F to 122°F (0°C to 50°C) Input resistance: Re 243 K Ω
Flow capacity†: 706 scfm (332 dm3/s, ANR) Actual valve output: Ux 0 - 10 V
l/min 20000 Output current: IAmax 10 mA
m3/h 1200
Degree of protection: IP65 to DIN 40050, EN 60529
Hysteresis: P2 max < 1%
Fluid: Compressed air
Repeatability: P2 max < 0.5%
Weight: 1.2 lb (2.7 kg)
Sensitivity: P2 max < 0.5% 1
) p1 > p2 + 10% p2
Linearity: P2 max < 1% 2
) at p1 - 10 bar to p2 - 6.3 bar
Nominal voltage: Un V DC 24 V = ± 10% †
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar)
Residual ripple: 10% pressure drop.

Ordering Information

P3YPA 9 6 B D 2 A A 2 A
Basic Series Thread Type* Version Control Signal Input Connector
Proportional Pressure BSPP 1 Side Exhaust, NC B A 4-20 mA 2 M12 (5-pin)
P3YPA
Regulator NPT 9 (Normally closed) V 0-10 V
Side Exhaust, NO C
Port Size (Normally open)
Power Supply Output Signal
3/4 6 2 24 volts A Analog 0-10 V
Pressure Range
1 8
0-10 bar (0-145 psig) D
* Note: For 1-1/2" ported unit, please order
P3YKA*BCP port block kit separately.

Most popular.

For inventory, lead

Catalog 0760P 90 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Proportional Pressure Regulators P3Y Series

Material Specifications Flow Characteristics

Housing Aluminium
Pilot valve booster Brass / NBR 8
composite aluminium
Standard seals NBR 7
10 6.3
Body cover screws Steel / zinc plated 6
8 6.3

Cables 5

8 4

P2 (bar)
Type Part Number 4

M12, 5-pin female to flying lead cable,

TPE; 2m (6.6 ft)
RKC 4.5T-2/S1587 3

8 2
2

Connection Diagram 1

0
5 2000 4000 6000 8000 10000 12000 14000 16000 18000
Q (l/min)

1 4
2 3

Connector M12 x 1
Pin No. Function
1 24 V Supply
2 0V Reference & mass capacity
3 0 - 10 V Set value input
4 0V Signal
5 0 - 10 V Analog output

170
(3.54)
140
(5.52)
Ø 64 Secondary pressure relief 1/8
(Ø 2.52) Exhaust pilot air M5
Max. 14
(.67) M12x1 **

140
(5.52) 40
(1.57)
50 G1
(1.97) (3/4)
49
(1.93)
10
(.39)
90 9 94
(3.54) (.35) (3.70)
2.5
(.10) 61 52
(2.40) (2.05)

* Two opposite gauge ports 1/4, plug screw mounted

** Connection for 5-pin plug M12 x 1

Catalog 0760P For inventory, lead

91 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Filter / Regulators P3Y Series

P3Y Filter / Regulator

• Integral 3/4" or 1" ports (BSPP or NPT)
• High efficiency element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminium construction
• Secondary pressure ranges 12 and 16 bar
• Rolling diaphragm for extended life
• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation.
• Reverse flow / relieving option
• Low temperature -40°C (-40°F) with combined manual / semi-
auto drain as standard
Operating Information
1 2 1 2 Supply pressure (max)*: 254 psig (17.5 bar)
Operating temperature:
Auto drain 14°F to 140°F (-10°C to 60°C)
Combined drain -40°F to 140°F (-40°C to 60°C)
Port Description Standard filtration: 5 micron
Size (0 to 174 psi) Part Number
Manual / semi-auto drain: Closed at 11.6 psig (0.8 bar)
Relieving, COmbined Manual / G1/8 thread male
3/4" P3YEA96ESCBNEN
Semi-Auto Drain
Auto drain bowl pressure: Closed at 11.6 psig (0.8 bar)
3/4" Relieving, Auto Drain P3YEA96ESABNEN Bowl capacity: 4.4 US oz. (130 cm3)

Relieving, Gauge, COmbined Manual / Standard filtration: 5 micron

3/4" P3YEA96ESCBNFN
Semi-Auto Drain Flow capacity†: 3/4" 335 scfm (158.1 dm3/s, ANR)
1" 465 scfm (219.5 dm3/s, ANR)
3/4" Relieving, Gauge, Auto Drain P3YEA96ESABNFN
Fluid: Compressed air
Relieving, COmbined Manual / Gauge port (x2): 1/4"
1" P3YEA98ESCBNEN
Semi-Auto Drain Weight: 3.3 lb (1.5 kg)
1" Relieving, Auto Drain P3YEA98ESABNEN
†
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar)
pressure drop.
Relieving, Gauge, COmbined Manual / * Air supply must be dry enough to avoid ice formation at temperatures below
1" P3YEA98ESCBNFN 35.6°F (2°C).
Semi-Auto Drain

1" Relieving, Gauge, Auto Drain P3YEA98ESABNFN Air quality:

Within ISO 8573-1: 1991 Class 3 and 5 (Particulates)
Within ISO 8573-1: 2001 Class 6 and 7 (Particulates)

Ordering Information

P3YEA 9 6 E SA B N E N
Basic Series Thread Type* Drain Type Relief Lockable Adjustment Range
Filter / BSPP 1 Combined Manual B Relieving N Standard 0 to 174 psi
P3YEA
Regulator NPT 9 Sc / Semi-Auto Reverse Flow A† Lockable E (0 to 12 bar), No
Drain R Gauge
/ Relieving
Port Size Sa Auto Drain 0 to 232 psi
3/4 6 H (0 to 16 bar), No
Notes: Element Gauge
* For 1-1/2" ported unit, please order 1 8
E 5 micron 0 to 174 psi
P3YKA*BCP port block kit separately. F
† Not field convertible. (0 to 12 bar), Gauge
0 to 232 psi
J
(0 to 16 bar), Gauge

Most popular.

For inventory, lead

Catalog 0760P 92 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Filter / Regulators P3Y Series

Material Specifications Flow Characteristics

Body Aluminium
(3/4") 5 Micron Filter / Regulator
Sight glass and bowl Polypropylene
Body cover ABS 9.0

120

Secondary Pressure - (bar)

Element Sintered 7.5

Secondary Pressure - (psig)

100
polypropylene 6.0
80 8.0 bar
Seals Nitrile NBR 4.5 116 psig
60
Manual / semi-auto drain Acetal 3.0 6.3 bar
40
Auto drain PA / Ø 10mm 4.0 bar 91.4 psig
20 1.5 2.5 bar 58 psig
brass connection 36.3 psig
0 0
Bonnet Glass filled 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
polyamide Flow - (dm 3/s)
n

Control Knob Glass filled 0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 600 640 680
Flow - (scfm)
polyamide
Valve Brass / NBR
Screws Steel / zinc
plated (1") 5 Micron Filter / Regulator
9.0
Repair and Service Kits 120

Secondary Pressure - (bar)

7.5

Secondary Pressure - (psig)

5 micron element kit P3YKA00ESE 100 8.0 bar
6.0 116 psig
Bowl kit with combined manual/semi auto drain P3YKA00BSC 80
4.5 6.3 bar
60
Bowl kit with auto drain P3YKA00BSA 91.4 psig
3.0
40
Key lock kit P3XKA00AS
20 1.5 2.5 bar 4.0 bar
Diaphragm kit (relieving type) P3YKA00RR 36.3 psig 58 psig
0 0
Diaphragm kit (non-relieving type) P3YKA00RN 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
Flow - (dm 3/s)
Angle bracket + metal lock ring P3YKA00MS n

0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 600 640 680
Panel mount nut P3YKA00MM Flow - (scfm)

WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION: 3.54
(90)
REGULATOR PRESSURE ADJUSTMENT – The working range of knob 2.17
adjustment is designed to permit outlet pressures within their full range. M64x2
(55)
Pressure adjustment beyond this range is also possible because the knob 3.11 0.39
2.40
is not a limiting device. This is a common characteristic of most industrial (61) (79) (10)
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting. 0.35
2.36 5.24 (9)
0.32
(60) (5) (133)
2.74
(69.5)
1.34
13.58 (34)
(345)
Gauge
port 1/4 Gauge
8.45 port 1/4
(212)

Min. 3.15 (80mm) G1/8 male

for filter changing

Inches (mm)

Catalog 0760P For inventory, lead

93 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Lubricators P3Y Series

P3Y Lubricator
• Integral 3/4" or 1" ports (BSPP and NPT)
• Robust but lightweight aluminium construction
• Proportional oil delivery over a wide range of air flows
• Possible to fill under system pressure eliminating
down time
• Large oil reservoir

1 2

Lubricator
with drain

Operating Information
Supply pressure (max)*: 254 psig (17.5 bar)
Operating temperature*: 14°F to 140°F (-10°C to 60°C)
Flow capacity†: 3/4" 315 scfm (148.2 dm3/s, ANR)
1" 390 scfm (184.1 dm3/s, ANR)
Port Fluid: Compressed air
Size Description Part Number
Weight: 1.8 lb (0.8 kg)
3/4" Oil Mist, Fill Under Pressure P3YLA96LSNN †
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar) pressure
drop.
1" Oil Mist, Fill Under Pressure P3YLA98LSNN
* Air supply must be dry enough to avoid ice formation at temperatures below
35.6°F (2°C).
Low flow start point (lubrication pick-up): at 6.3 bar (91.4 psig) inlet pressure
0.5 dm3/s (1.1 scfm).

Ordering Information

P3YLA 9 6 LSNN
Basic Series Thread Type* Port Size
Lubricator P3YLA BSPP 1 3/4 6
NPT 9 1 8

* Note: For 1-1/2" ported unit, please order P3YKA*BCP port block kit
separately.

Most popular.

For inventory, lead

Catalog 0760P 94 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Lubricators P3Y Series

Material Specifications Flow Characteristics

Body Aluminium
(3/4") Lubricator
Sight glass and bowl Polypropylene
Primary Pressure - bar 2.5 6.3 10
Sight dome Polyamide Primary Pressure - psig 36.2 91.4 145
0.90
Lubricator cover ABS
12 0.75
Top & bottom end cap Glass filled nylon

Pressure Drop - (bar)

Pressure Drop - (psig)
10
0.60
Bayonet support Nylon 8
0.45
Seals Nitrile NBR 6
0.30
4

2 0.15

0 0
Repair and Service Kits 0 20 40 60 80 100 120 140 160 180
Flow - (dm 3/s)
200 220 240 260 280 300

P3YKA00BSN
n
Bowl kit
0 100 200 300 400 500 600
Refill plug P3YKA00PL Flow - (scfm)

Oil (1 quart) F442001

Oil (1 galllon) F442002
(1") Lubricator
Oil (12 quart case) F442003
Primary Pressure - bar 2.5 6.3 10
Oil (4 gallon case) F442005 Primary Pressure - psig 36.2 91.4 145
0.90

12 0.75

Pressure Drop - (bar)

Pressure Drop - (psig)
10
0.60
8
0.45
6
0.30
4

2 0.15

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Flow - (dm 3/s)
n

0 100 200 300 400 500 600

Flow - (scfm)

6.69
(170)
2.40 1.57 5.51
(61) (47) (140)
3.54
.098 (90)
(2.5) 0.39
(10)
1.85
(40)
1.97
(55)

9.72 0.35
(247) (9)
7.48
(190)

Inches (mm)

Catalog 0760P For inventory, lead

95 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Combination Units P3Y Series

P3Y Combinations

Filter + Regulator + Lubricator Combinations

5 micron element, 12 bar (174 psig) regulator + gauge and wall mounting bracket
‡
Port Flow Weight Combined Manual /
Size scfm lb (kg) Semi-Auto Drain† Auto Drain†
3/4" 170 7.3 (3.3) P3YCB96SECNFLNF P3YCB96SEANFLNF
1" 170 7.3 (3.3) P3YCB98SECNFLNF P3YCB98SEANFLNF
† Standard part numbers shown in bold. For other models refer to Options chart below.
‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.4 psig) set pressure and 1 bar (14.5 psig) pressure drop.

Filter / Regulator + Lubricator Combinations

5 micron element, 12 bar (174 psig) regulator + gauge and wall mounting bracket
Port Flow‡ Weight Combined Manual /
Size scfm lb (kg) Semi-Auto Drain† Auto Drain†
3/4" 315 6.2 (2.8) P3YCA96SECNFLNF P3YCA96SEANFLNF
1" 340 6.2 (2.8) P3YCA98SECNFLNF P3YCA98SEANFLNF
† Standard part numbers shown in bold. For other models refer to Options chart below.
‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.4 psig) set pressure and 1 bar (14.5 psig) pressure drop.

Ordering Information:

P3YCA 9 6 SE C N F LNF
Basic Series Thread Type* Port Size Drain Type Adjustment Range
Filter / Regulator + BSPP 1 3/4 6 Combined Manual / 0-12 bar (0 to 174 psi)
P3YCA C F
Lubricator NPT 9 1 8 Semi-Auto Drain with Gauge
Filter + Regulator + A Auto Drain 0-16 bar (0 to 232 psi)
P3YCB J
Lubricator with Gauge

* Note: For 1-1/2" ported unit, please order P3YKA*BCP port block kit
separately.

WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION:
REGULATOR PRESSURE ADJUSTMENT –
The working range of knob adjustment is designed to permit outlet pressures within
their full range. Pressure adjustment beyond this range is also possible because
the knob is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For best
performance, regulated pressure should always be set by increasing the pressure up
to the desired setting.

Most popular.

For inventory, lead

Catalog 0760P 96 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Combination Units P3Y Series

P3Y Combinations
10.63
(270)
3.54
(90)
2.17
M64x2
(55)
2.40 3.11 0.39
(61) (79) (10)

0.35
2.36 0.32 1.33 (9)
(60) (5) (5.24)
2.74
(69.5)
1.34
13.58 (34)
Gauge (345)
port 1/4
8.45
(212)

Min. 3.15 (80mm) G1/8 Gauge

for filter changing male port 1/4

7.09
(180)
3.54
(90)
2.17
M64x2
(55)
2.40 3.11 0.39
(61) (79) (10)

0.35
2.36 0.32 5.24 (9)
(60) (5) (133)
2.74
(69.5)
1.34
13.58 (34)
(345) Gauge
Gauge port
port 1/4 1/4
8.45
(212)

Min. 3.15 (80mm) G1/8 male

for filter changing

6.69
(170)
2.40 1.85 5.51
(61) (47) (140)
0.01 3.54 0.35
(2.5) (90) (9)
1.57
(40) 1.97
(50)

9.92 0.39
(252) 8.45 (10)
(212)

Min. 3.15 (80mm)

for filter changing G1/8 male

Catalog 0760P For inventory, lead

97 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Soft Start / Dump Valve P3Y Series

P3Y Combined Soft Start / Dump Valve

• Modular design with 3/4" & 1" integral ports
(BSPP or NPT)
• Provides for the safe introduction of pressure
• Automatically dumps downstream pressure on the
loss of pilot signal
• Adjustable slow start
• Solenoid or air pilot options
• High flow & exhaust capability

P3Y Series Combined Soft Start / Dump Valves, provide for the
safe introduction of pressure to machines or systems. Soft Start
/ Dump Valves when set, allow the pressure to gradually build
to the set point before fully opening to deliver full flow at line
pressure.
The controlled introduction of pressure can be an important Operating Information
safety factor and prevent damage to tooling when air pressure is Operating pressure (max):
introduced at machine or system start up. 30mm coil 232 psig (16 bar)
Operating pressure (min): 2.9 psig (0.2 bar)
Operating temperature*:
Solenoid operated 14°F to 140°F (-10°C to 60°C)
2 Air pilot operated 14°F to 140°F (-10°C to 60°C)
Air pilot port: 1/8"
Exhaust port: NPT 3/4"
BSPP 1"
3 1 Gauge port: 1/4"
Flow capacity†: 3/4" 371 scfm (175.1 dm3/s, ANR)
Port 1" 424 scfm (200.1 dm3/s, ANR)
Size Description Part Number Fluid: Compressed air
3/4" Air pilot operated P3YTA96PPN Weight: Air pilot 3.1 lb (1.4 kg)
30mm coil 3.5 lb (1.6 kg)
3/4" 24VDC 30mm coil P3YTA96SCNA2CN
1" Air pilot operated P3YTA98PPN
†
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar) pressure
drop.
1" 24VDC 30mm coil P3YTA98SCNA2CN * Air supply must be dry enough to avoid ice formation at temperatures
below 35.6°F (2°C).
Snap pressure: Full flow when downstream pressure reaches 50% of the
inlet pressure.

Ordering Information

Solenoid type only

P3YTA 9 6 P C N A 2 C N
Basic Series Thread Type* Pilot Type Solenoid Voltage
Soft Start / BSPP 1 External Air Pilot P 2CN 24VDC
P3YTA
Dump Valve NPT 9 Solenoid Pilot S

Port Size Actuator Interface Solenoid Type

3/4 6 30mm Operator C A 30mm CNOMO Coil
1 8 Threaded Air P 30mm CNOMO Coil (M12
D
* Note: For 1-1/2" ported unit, please order Pilot connection)
P3YKA*BCP port block kit separately.

Most popular.

For inventory, lead

Catalog 0760P 98 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Soft Start / Dump Valve P3Y Series

Material Specifications Combined start / stop function

Body Aluminium
Body cover ABS
Valve Brass / NBR
composite
Pilot valve booster Aluminum
Seals Nitrile NBR
Note: For solenoid coil and cable plug options see solenoid operator pages.

Flow Characteristics
100% 4
Combined start / stop function with acknowledgement
Pressure (p)

90%

1 0%
2

Time (t)
1 Start signal
2 Switching time delay
3 Gradual pressure build up
4 Operating pressure p2 (= p1)

SW3 23
SW3 0.98
(25) Allen key
25
(.98) adjustment

0.98
(25)
25 0.63
1/8 1A (16) 12
(.98)
0.6
15.25 (15.25)
(.6)
3.50
89 (89)
(3.50) Ø 1.18
0.59
(15) (30)

61 17 3/4
(2.40) (.67) (G1)

G1 3.19
(3/4) (81) 2.20
(56)
81
(3.19) 56
(2.20) 1.93
(49)

49 3/4 3.54
(1.93 (G1) (90)
3.70
(94)
G1 90 4.09
(3/4) (3.54) (104)
94
(3.70)
104
(409)
Catalog 0760P For inventory, lead
99 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Soft Start Valve P3Y Series

P3Y Soft Start Valve

• Integral 3/4" or 1" ports
• Smooth start-up of pneumatic system
• Air pilot operation
• Adjustable slow start
• High flow

Operating Information
Port Operating pressure (max): 254 psig (17.5 bar)
Size Description Part Number Operating pressure (min): 29 psig (2 bar)
3/4" Soft Start Valve P3YSA96Y0N Operating temperature*:
Solenoid operated 14°F to 140°F (-10°C to 60°C)
1" Soft Start Valve P3YSA98Y0N Air pilot operated 14°F to 140°F (-10°C to 60°C)
Flow capacity †: 3/4" 324 scfm (152.9 dm3/s, ANR)
Material Specifications 1" 324 scfm (152.9 dm3/s, ANR)
Fluid: Compressed air
Body Aluminium
Weight: 1.8 lb (0.8 kg)
Body cover ABS
†
Inlet pressure 91.4 psig (6.3 bar) inlet pressure and 7.3 psig (0.5 bar) pressure
Valve Brass / NBR drop.
composite * Air supply must be dry enough to avoid ice formation at temperatures
below 35.6°F (2°C).
Pilot valve booster Aluminum
Snap pressure: Full flow when downstream pressure reaches 50% of the
Seals Nitrile NBR inlet pressure.

Ordering Information

P3YSA 9 6 Y 0 N
Basic Series Thread Type* Port Size
Soft Start Valve P3YSA BSPP 1 3/4 6
NPT 9 1 8
* Note: For 1-1/2" ported unit, please order
P3YKA*BCP port block kit separately.

Flow Characteristics

4 1.97 1.85
100%
(50) (47)
SW3
Pressure (p)

34
90% (1.34)

3
51
1 0% (2.01)
2

1 Start signal Time (t) 3/4 3.54

2 Switching time delay (G1) (90)
3 Gradual pressure build up
Inches (mm)
4 Operating pressure p2 (= p1)

Most popular.

For inventory, lead

Catalog 0760P 100 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Modular Ball Valve P3Y Series

P3Y Modular Ball Valve

• Positive bubble tight shut-off
• 90° turn handle to prevent unauthorized adjustment
• Pad lockable (up to 6 times)
• When the inlet pressure is turned off the downstream vents
through the exhaust port

Ball / Lockout Valve shuts off downstream line pressure in

the closed position with a 90° turn of the handle. In the closed Operating Information
position, inlet air pressure is blocked and downstream / system Operating pressure (max): 254 psig (17.5 bar)
air is exhausted through a threaded port. To prevent unauthorized
Operating pressure (min): 29 psig (2 bar)
adjustment, the padlock slide may be assembled on either side.
It is recommended that this slide is installed after final system Operating temperature: 14°F to 140°F (-10°C to 60°C)
assembly. Flow capacity †: 3/4" 705.6 scfm (333 dm3/s, ANR)
1" 705.6 scfm (333 dm3/s, ANR)
The Safety Lockout valves conform to OSHA #29 CFR part 1910 –
Weight: 3/4" 2.4 lb (1.1 kg)
control of hazardous energy source (lockout / tagout). 1" 2.4 lb (1.1 kg)

Ordering Information

P3YVA 9 6 LBN
Basic Series Thread Type* Port Size
Modular Ball Valve P3YVA BSPP 1 3/4 6
NPT 9 1 8
* Note: For 1-1/2" ported unit, please order
P3YKA*BCP port block kit separately.

3.15
Material Specifications (80)

Body Aluminium
Valve ball Brass / nickle
plated 3.54
(90)
Handle Aluminum
Seals Nitrile NBR
Exhaust silencer Sintered 0.35
bronze (9)
Ø 1.73 3.54
(44) (90)
0.40
(10.2)

3.19
(81) 2.34
5.31 (59.2)
(135)
3/4 2.60
(G1) (66)
Ø 2.74
(69.5)
1/4
NPT
2.60
(66)
Inches (mm)

Catalog 0760P For inventory, lead

101 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories P3Y Series

Modular Manifold Material Specifications

Body Aluminium
Weight 0.7 kg (1.5 lb)

3.15
(80)
1/4"

1" 3/4"

P3Y Series Manifolds provide up to 4 extra outlet ports. They

may be assembled at any position in a combination e.g. before
1/4"
the lubricator to provide oil free take off or at the end of a
combination to provide extra outlet ports. 79
(20)
1/8" M5
Thread Type Part Number
3/4
BSPP P3YMA1V0N (G1)

NPT P3YMA9V0N 2.60

(66)

Port sizes Ø 2.74

(Ø 69.5)
2.60 1"
Inlet Port Top Bottom Front and Back
(66)
3/4" 1/8” 1” 1/4”
Inches (mm)
1" 1/8” 1” 1/4”

Optional Port Block Kits

• To change port sizes Port Block Kits are available, they are
attached to any unit utilizing the connecting kit.
• Allows assemblies to be removed from a hard piped system.

Material Specifications
Body Aluminium
Weight 0.65 kg (1.43 lb)

45
(1.77)
Ordering Information

P3YKA 9 B CP Ø 69.5
(Ø 2.74)

Basic Series Thread Type Port Size

Port Blocks P3YKA BSPP 1 1-1/2 B
NPT 9

Inches (mm)

For inventory, lead

Catalog 0760P 102 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories P3Y Series
Solenoid Operators - CNOMO

Technical Data - Transients

Solenoid operators, coil combinations Interrupting the current through the solenoid coil produces
NC Normal Operator NC Normal Operator momentary voltage peaks which, under unfavorable conditions,
with 22 x 30 with 30 x 30 can amount to several hundred times the rated operating
standard coil standard coil voltage. Normally, these transients do not cause problems, but to
Working pressure 0 to 10 bar 0 to 10 bar achieve the Maximum life of relays in the circuit (and particularly
Ambient temperature -10°C to 60°C * -10°C to 60°C * of transistors, thyristors and integrated circuits) it is desirable
to provide protection by means of voltage-dependent resistors
Power (DC) 4.8W 2.7W (varistors). All connectors/cable plugs EN175301-803 with LED’s
Power (AC) 8.5VA 4.9VA include this type of circuit protection.
Voltage tolerance +/-10% +/-10%
Duty cycle 100% 100%
Insulation class F F
Materials
Electric connection B Industrial DIN 43650A
Protection IP65 IP65 Pilot Valve
Approval UL/CSA Body: Polyamide

Working media All neutral media such as compressed air Armature tube: Brass

* Limited to 50°C if use with 100% duty cycle Plunger & core: Corrosion resistant Cr-Ni steel
Seals: Fluorocarbon
Screws: Stainless steel

Solenoid Coils with M12 Connection Coil

Encapsulation material: Thermoplastic as standard
Weight Duroplast for M12 connection
Voltage Part Number (Kg)
Direct current
24VDC P2FC6449 0.065
Spare Base Solenoid Pilot Operator
CNOMO NC
Weight
Description Part Number (Kg)
Non-lock
P2FP23N4B 0.065
Manual Override
No Override P2FP23N4A 0.065
Note: Solenoid pilot operators are fitted to the Global range. Order the above
part numbers for spares. The operators are supplied with mounting
screws and interface ‘O’ rings. Coils and connectors must be ordered
separately.

Solenoid Coils with DIN A or Industrial B Connection

30mm x 30mm
22mm x 30mm Part Number
Part Number B Weight DIN 43650A Weight
Voltage Industrial Standard (Kg) Standard (Kg)
Direct current
24VDC P2FCB449 0.093 P2FCA449 0.105
Alternative current
110V 50Hz, 120V 60Hz P2FCB453 0.093 P2FCA453 0.105

Most popular.

Catalog 0760P For inventory, lead

103 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories P3Y Series
Solenoid Connectors / Cable Plugs EN175301-803
Part Number Part Number
22mm Form B 30mm Form A
Description Industrial DIN 43650A
With standard screw Standard IP65 without flying lead PS2429BP PS2028BP
With LED and protection 24VAC/DC PS243079BP PS203279BP
With LED and protection 110VAC PS243083BP PS203283BP

With cable Standard with 2m cable IP65 PS2429JBP PS2028JCP

24VAC/DC, 2m cable LED and protection IP65 PS2430J79BP PS2032J79CP
110VAC/DC, 2m cable LED and protection IP65 PS2430J83BP PS2032J83CP

Solenoid Coil Dimensions mm (inches) Electrical Schematics

22 x 30mm 30 x 30mm

1.18 0.86 1.18

(30) (22) (30)

1.61 1.89
1.77 (41) 1.30 (48)
(45) 1.22 (33)
1.42 1.22 PS243079BP PS203279BP
(36) (31)
(31)
PS2430J79BP PS2032J79CP
0.87 0.87
PS243083BP PS203283BP
2.01 (22) 2.05 (22)
2.36 (51) 2.36 (52) PS2430J83BP PS2032J83CP
(60) (60)
PS294679BP PS294683BP
PS2946J79BP PS2946J83BP

Cable Plug Dimensions mm (inches)

22mm Form B industrial cable plugs 30mm DIN 43650A cable plugs

PS2429BP PS2028BP

1.57
(40)
1.22
(31)
1.18
(30)
1.65
(42)
1.87
0.22 1.22 (47.5)
(5.5) (31)

0.82 1.18
(20.8) (30) 1.26
(32)

M3 1.22 0.50
(31) (5)

Most popular.

For inventory, lead

Catalog 0760P 104 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Accessories P3Y Series

Weight
Description Connection lb (kg) Part Number
0.01 micron Element Kit P3YKA00ESC

5 micron Element Kit P3YKA00ESE

Adsorber Element Kit P3YKA00ESA

Angle Bracket + Metal Lock Ring P3YKA00MS

Bowl Kit With Combined Manual / Semi-Auto Drain P3YKA00BSC

Bowl Kit With Auto Drain P3YKA00BSA

Bowl Kit P3YKA00BSN

Connector O-Ring Kit Qty: 5 P3YKA08CY

Differential Pressure Indicator Kit P3YKA00RQ

Diaphragm Kit (Relieving Type) P3YKA00RR

Diaphragm Kit (Non-Relieving Type) P3YKA00RN

Key Lock (Replacement) P3XKA00AS

F442001 - 1 Qt. F442001

2.03
Lubricator Oil
(0.92)
F442002 - 1 Gal F442002

Neck Mounting Bracket Kit 8.27 (3.75) P3YKA00MS

0.11
P3y Connecting Kit P3YKA00CB
(0.05)

1.54
Panel Mounting Nut (Aluminium) P3YKA00MM
(0.70)

0 to 160 psig 0.13

1/4” K4520N14160
(0 to 10 bar) (0.06)
Pressure Gauge
0 to 300 psig 0.13
1/4” K4520N14300
(0 to 20 bar) (0.06)
Refill Plug P3YKA00PL

0.44
Wall Mounting Brackets P3YKA00CW
(0.2)

Most popular.

Catalog 0760P For inventory, lead

105 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Parker Pneumatic Safety Guide

Safety Guide For Selecting And Using Pneumatic Division

Products And Related Accessories
WARNING:
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF PNEUMATIC DIVISION PRODUCTS, ASSEMBLIES OR RELATED
ITEMS (“PRODUCTS”) CAN CAUSE DEATH, PERSONAL INJURY, AND PROPERTY DAMAGE. POSSIBLE CONSEQUENCES OF
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THESE PRODUCTS INCLUDE BUT ARE NOT LIMITED TO:
• Unintended or mistimed cycling or motion of machine members or failure to cycle
• Work pieces or component parts being thrown off at high speeds.
• Failure of a device to function properly for example, failure to clamp or unclamp an associated item or device.
• Explosion
• Suddenly moving or falling objects.
• Release of toxic or otherwise injurious liquids or gasses.
Before selecting or using any of these Products, it is important that you read and follow the instructions below.

1. GENERAL INSTRUCTIONS
1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division
Valves, FRLs (Filters, Pressure Regulators, and Lubricators), Vacuum products and related accessory components.
1.2. Fail-Safe: Valves, FRLs, Vacuum products and their related components can and do fail without warning for many reasons. Design all
systems and equipment in a fail-safe mode, so that failure of associated valves, FRLs or Vacuum products will not endanger persons
or property.
1.3 Relevant International Standards: For a good guide to the application of a broad spectrum of pneumatic fluid power devices see:
ISO 4414:1998, Pneumatic Fluid Power – General Rules Relating to Systems. See www.iso.org for ordering information.
1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs
or Vacuum products. Do not select, or use Parker valves, FRLs or vacuum products without thoroughly reading and understanding this
safety guide as well as the specific Parker publications for the products considered or selected.
1.5. User Responsibility: Due to the wide variety of operating conditions and applications for valves, FRLs, and vacuum products Parker
and its distributors do not represent or warrant that any particular valve, FRL or vacuum product is suitable for any specific end use
system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through
its own analysis and testing, is solely responsible for:
• Making the final selection of the appropriate valve, FRL, Vacuum component, or accessory.
• Assuring that all user’s performance, endurance, maintenance, safety, and warning requirements are met and that the application
presents no health or safety hazards.
• Complying with all existing warning labels and / or providing all appropriate health and safety warnings on the equipment on which
the valves, FRLs or Vacuum products are used; and,
• Assuring compliance with all applicable government and industry standards.
1.6. Safety Devices: Safety devices should not be removed, or defeated.
1.7. Warning Labels: Warning labels should not be removed, painted over or otherwise obscured.
1.8. Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional
information. See the Parker publication for the product being considered or used, or call 1-800-CPARKER, or go to www.parker.com,
for telephone numbers of the appropriate technical service department.
2. PRODUCT SELECTION INSTRUCTIONS
2.1. Flow Rate: The flow rate requirements of a system are frequently the primary consideration when designing any pneumatic system.
System components need to be able to provide adequate flow and pressure for the desired application.
2.2. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the
instruction sheets supplied for maximum pressure ratings.
2.3. Temperature Rating: Never exceed the temperature rating of a product. Excessive heat can shorten the life expectancy of a product
and result in complete product failure.
2.4. Environment: Many environmental conditions can affect the integrity and suitability of a product for a given application. Pneumatic
Division products are designed for use in general purpose industrial applications. If these products are to be used in unusual
circumstances such as direct sunlight and/or corrosive or caustic environments, such use can shorten the useful life and lead to
premature failure of a product.
2.5. Lubrication and Compressor Carryover: Some modern synthetic oils can and will attack nitrile seals. If there is any possibility of
synthetic oils or greases migrating into the pneumatic components check for compatibility with the seal materials used. Consult the
factory or product literature for materials of construction.
2.6. Polycarbonate Bowls and Sight Glasses: To avoid potential polycarbonate bowl failures:
• Do not locate polycarbonate bowls or sight glasses in areas where they could be subject to direct sunlight, impact blow, or
temperatures outside of the rated range.
• Do not expose or clean polycarbonate bowls with detergents, chlorinated hydro-carbons, keytones, esters or certain alcohols.
• Do not use polycarbonate bowls or sight glasses in air systems where compressors are lubricated with fire resistant fluids such as
phosphate ester and di-ester lubricants.
For inventory, lead
Catalog 0760P 106 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 Air Preparation Products
Parker Pneumatic Safety Guide
2.7. Chemical Compatibility: For more information on plastic component chemical compatibility see Pneumatic Division technical bulletins
Tec-3, Tec-4, and Tec-5
2.8. Product Rupture: Product rupture can cause death, serious personal injury, and property damage.
• Do not connect pressure regulators or other Pneumatic Division products to bottled gas cylinders.
• Do not exceed the maximum primary pressure rating of any pressure regulator or any system component.
• Consult product labeling or product literature for pressure rating limitations.
3. PRODUCT ASSEMBLY AND INSTALLATION INSTRUCTIONS
3.1. Component Inspection: Prior to assembly or installation a careful examination of the valves, FRLs or vacuum products must be
performed. All components must be checked for correct style, size, and catalog number. DO NOT use any component that displays any
signs of nonconformance.
3.2. Installation Instructions: Parker published Installation Instructions must be followed for installation of Parker valves, FRLs and
vacuum components. These instructions are provided with every Parker valve or FRL sold, or by calling 1-800-CPARKER, or at
www.parker.com.
3.3. Air Supply: The air supply or control medium supplied to Valves, FRLs and Vacuum components must be moisture-free if ambient
temperature can drop below freezing
4. VALVE AND FRL MAINTENANCE AND REPLACEMENT INSTRUCTIONS
4.1. Maintenance: Even with proper selection and installation, valve, FRL and vacuum products service life may be significantly reduced
without a continuing maintenance program. The severity of the application, risk potential from a component failure, and experience
with any known failures in the application or in similar applications should determine the frequency of inspections and the servicing or
replacement of Pneumatic Division products so that products are replaced before any failure occurs. A maintenance program must
be established and followed by the user and, at minimum, must include instructions 4.2 through 4.9.
4.2. Installation and Service Instructions: Before attempting to service or replace any worn or damaged parts consult the appropriate
Service Bulletin for the valve or FRL in question for the appropriate practices to service the unit in question. These Service and
Installation Instructions are provided with every Parker valve and FRL sold, or are available by calling 1-800-CPARKER, or by accessing
the Parker web site at www.parker.com.
4.3. Lockout / Tagout Procedures: Be sure to follow all required lockout and tagout procedures when servicing equipment. For more
information see: OSHA Standard – 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy – (Lockout / Tagout)
4.4. Visual Inspection: Any of the following conditions requires immediate system shut down and replacement of worn or damaged
components:
• Air leakage: Look and listen to see if there are any signs of visual damage to any of the components in the system. Leakage is an
indication of worn or damaged components.
• Damaged or degraded components: Look to see if there are any visible signs of wear or component degradation.
• Kinked, crushed, or damaged hoses. Kinked hoses can result in restricted air flow and lead to unpredictable system behavior.
• Any observed improper system or component function: Immediately shut down the system and correct malfunction.
• Excessive dirt build-up: Dirt and clutter can mask potentially hazardous situations.
Caution: Leak detection solutions should be rinsed off after use.
4.5. Routine Maintenance Issues:
• Remove excessive dirt, grime and clutter from work areas.
• Make sure all required guards and shields are in place.
4.6. Functional Test: Before initiating automatic operation, operate the system manually to make sure all required functions operate
properly and safely.
4.7. Service or Replacement Intervals: It is the user’s responsibility to establish appropriate service intervals. Valves, FRLs and vacuum
products contain components that age, harden, wear, and otherwise deteriorate over time. Environmental conditions can significantly
accelerate this process. Valves, FRLs and vacuum components need to be serviced or replaced on routine intervals. Service intervals
need to be established based on:
• Previous performance experiences.
• Government and / or industrial standards.
• When failures could result in unacceptable down time, equipment damage or personal injury risk.
4.8. Servicing or Replacing of any Worn or Damaged Parts: To avoid unpredictable system behavior that can cause death, personal
injury and property damage:
• Follow all government, state and local safety and servicing practices prior to service including but not limited to all OSHA Lockout
Tagout procedures (OSHA Standard – 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy – Lockout / Tagout).
• Disconnect electrical supply (when necessary) before installation, servicing, or conversion.
• Disconnect air supply and depressurize all air lines connected to system and Pneumatic Division products before installation, service,
or conversion.
• Installation, servicing, and / or conversion of these products must be performed by knowledgeable personnel who understand how
pneumatic products are to be applied.
• After installation, servicing, or conversions air and electrical supplies (when necessary) should be connected and the product tested
for proper function and leakage. If audible leakage is present, or if the product does not operate properly, do not put product or
system into use.
• Warnings and specifications on the product should not be covered or painted over. If masking is not possible, contact your local
representative for replacement labels.
4.9. Putting Serviced System Back into Operation: Follow the guidelines above and all relevant Installation and Maintenance Instructions
supplied with the valve FRL or vacuum component to insure proper function of the system.

Catalog 0760P For inventory, lead

107 Pneumatic Division | Richland, Michigan
times, and kit lookup,
Air Preparation Products visit www.pdnplu.com www.parker.com/pneumatics
 PARKER-HANNIFIN CORPORATION
OFFER OF SALE
1. Definitions. As used herein, the following terms have the meanings addition to any other or further rights and remedies available at law or in
indicated. equity. No waiver by Seller of any breach by Buyer of any provision of these
“Buyer” means any customer receiving a Quote for Products. terms will constitute a waiver by Seller of any other breach of such provision.
“Buyer’s Property” means any tools, patterns, plans, drawings, designs, 4. Shipment; Delivery; Title and Risk of Loss. All delivery dates are
specifications materials, equipment, or information furnished by Buyer, or approximate, and Seller is not responsible for damages or additional costs
which are or become Buyer's property. resulting from any delay. All deliveries are subject to our ability to procure
“Confidential Information” means any technical, commercial, or other materials from our suppliers. Regardless of the manner of shipment, delivery
proprietary information of Seller, including, without limitation, pricing, technical occurs and title and risk of loss or damage pass to Buyer, upon placement of
drawings or prints and/or part lists, which has been or will be disclosed, the Products with the carrier at Seller's facility. Unless otherwise agreed prior
delivered, or made available, whether directly or indirectly, to Buyer. to shipment and for domestic delivery locations only, Seller will select and
“Goods” means any tangible part, system or component to be supplied by arrange, at Buyer’s sole expense, the carrier and means of delivery. When
Seller. Seller selects and arranges the carrier and means of delivery, freight and
“Intellectual Property Rights” means any patents, trademarks, copyrights, insurance costs for shipment to the designated delivery location will be
trade dress, trade secrets or similar rights. prepaid by Seller and added as a separate line item to the invoice. Buyer shall
“Products” means the Goods, Services and/or Software as described in a be responsible for any additional shipping charges incurred by Seller due to
Quote. Buyer’s acts or omissions. Buyer shall not return or repackage any Products
“Quote” means the offer or proposal made by Seller to Buyer for the supply of without the prior written authorization from Seller, and any return shall be at
Products. the sole cost and expense of Buyer.
“Seller” means Parker-Hannifin Corporation, including all divisions,
subsidiaries and businesses selling Products under these Terms. 5. Warranty. The warranty for the Products is as follows:
“Seller’s IP” means patents, trademarks, copyrights, or other intellectual (i) Goods are warranted against defects in material or workmanship for a
property rights relating to the Products, including without limitation, names, period of twelve (12) months from the date of delivery or 2,000 hours of use,
designs, images, drawings, models, software, templates, information, any whichever occurs first; (ii) Services shall be performed in accordance with
improvements or creations or other intellectual property developed prior to or generally accepted practices and using the degree of care and skill that is
during the relationship contemplated herein. ordinarily exercised and customary in the field to which the Services pertain
“Services” means any services to be provided by Seller. and are warranted for a period of six (6) months from the date of completion of
“Software” means any software related to the Goods, whether embedded or the Services; and (iii) Software is only warranted to perform in accordance with
separately downloaded. applicable specifications provided by Seller to Buyer for ninety (90) days from
“Special Tooling” means equipment acquired by Seller or otherwise owned by the date of delivery or, when downloaded by a Buyer or end-user, from the
Seller necessary to manufacture Goods, including but not limited to tools, jigs, date of the initial download. All prices are based upon the exclusive limited
and fixtures. warranty stated above, and upon the following disclaimer: EXEMPTION
“Terms” means the terms and conditions of this Offer of Sale. CLAUSE; DISCLAIMER OF WARRANTY, CONDITIONS,
REPRESENTATIONS: THIS WARRANTY IS THE SOLE AND ENTIRE
2. Terms. All sales of Products by Seller will be governed by, and are WARRANTY, CONDITION, AND REPRESENTATION, PERTAINING TO
expressly conditioned upon Buyer’s assent to, these Terms. These Terms are PRODUCTS. SELLER DISCLAIMS ALL OTHER WARRANTIES,
incorporated into any Quote provided by Seller to Buyer. Buyer’s order for any CONDITIONS, AND REPRESENTATIONS, WHETHER STATUTORY,
Products whether communicated to Seller verbally, in writing, by electronic EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THOSE
data interface or other electronic commerce, shall constitute acceptance of RELATING TO DESIGN, NONINFRINGEMENT, MERCHANTABILITY, AND
these Terms. Seller objects to any contrary or additional terms or conditions of FITNESS FOR A PARTICULAR PURPOSE. SELLER DOES NOT
Buyer. Reference in Seller's order acknowledgement to Buyer's purchase WARRANT THAT THE SOFTWARE IS ERROR-FREE OR FAULT-
order or purchase order number shall in no way constitute an acceptance of TOLERANT, OR THAT BUYER’S USE THEREOF WILL BE SECURE OR
any of Buyer's terms or conditions of purchase. Any Quote made by Seller to UNINTERRUPTED, UNLESS OTHERWISE AUTHORIZED IN WRITING BY
Buyer shall be considered a firm and definite offer and shall not be deemed to SELLER, THE SOFTWARE SHALL NOT BE USED IN CONNECTION WITH
be otherwise despite any language on the face of the Quote. Seller reserves HAZARDOUS OR HIGH-RISK ACTIVITIES OR ENVIRONMENTS. EXCEPT
all rights to accept or reject any purported acceptance by Buyer to Seller’s AS EXPRESSLY STATED HEREIN, ALL PRODUCTS ARE PROVIDED “AS
Quote if such purported acceptance attempts to vary the terms of the Quote. IS”.
If Seller ships Products after Buyer issues an acceptance to the Quote, any
additional or different terms proposed by Buyer will not become part of the 6. Claims; Commencement of Actions. Buyer shall promptly inspect all
parties’ business relationship unless agreed to in a writing that is signed by an Products upon receipt. No claims for shortages will be allowed unless reported
authorized representative of Seller, excluding email correspondence. If the to Seller within ten (10) days of delivery. Buyer shall notify Seller of any
transaction proceeds without such agreement on the part of Seller, the alleged breach of warranty within thirty (30) days after the date the non-
business relationship will be governed solely by these Terms and the specific conformance is or should have been discovered by Buyer. Any claim or action
terms in Seller’s Quote. against Seller based upon breach of contract or any other theory, including
tort, negligence, or otherwise must be commenced within twelve (12) months
3. Price; Payment. The Products set forth in the Quote are offered for sale from the date of the alleged breach or other alleged event, without regard to
at the prices indicated in the Quote. Unless otherwise specifically stated in the the date of discovery.
Quote, prices are valid for thirty (30) days and do not include any sales, use,
or other taxes or duties. Seller reserves the right to modify prices for any 7. LIMITATION OF LIABILITY. IN THE EVENT OF A BREACH OF
reason and at any time by giving ten (10) days prior written notice. Unless WARRANTY, SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE THE
otherwise specified by Seller, all prices are F.C.A. Seller's facility NON-CONFORMING PRODUCTS, RE-PERFORM THE SERVICES, OR
(INCOTERMS 2020). All sales are contingent upon credit approval and full REFUND THE PURCHASE PRICE PAID WITHIN A REASONABLE
payment for all purchases is due thirty (30) days from the date of invoice (or PERIOD OF TIME. IN NO EVENT IS SELLER LIABLE FOR ANY SPECIAL,
such date as may be specified in the Quote). Under any circumstances, Buyer INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING
may not withhold or suspend payment of any amounts due and payable as a ANY LOSS OF REVENUE OR PROFITS, WHETHER BASED IN
deduction, set-off or recoupment of any amount, claim or dispute with Seller. CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL
Unpaid invoices beyond the specified payment date incur interest at the rate of SELLER'S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED
1.5% per month or the maximum allowable rate under applicable law. Seller THE PURCHASE PRICE PAID FOR THE PRODUCTS.
reserves the right to require advance payment or provision of securities for first 8. Confidential Information. Buyer acknowledges and agrees that
and subsequent deliveries if there is any doubt, in Seller’s sole determination, Confidential Information has been and will be received in confidence and will
regarding the Buyer’s creditworthiness or for other business reasons. If the remain the property of Seller. Buyer further agrees that it will not use Seller’s
requested advance payment or securities are not provided to Seller’s Confidential Information for any purpose other than for the benefit of Seller
satisfaction, Seller reserves the right to suspend performance or reject the and shall return all such Confidential Information to Seller within thirty (30)
purchase order, in whole or in part, without prejudice to Seller’s other rights or days upon request.
remedies, including the right to full compensation. Seller may revoke or
shorten any payment periods previously granted in Seller’s sole determination. 9. Loss to Buyer's Property. Buyer’s Property will be considered obsolete
The rights and remedies herein reserved to Seller are cumulative and in and may be destroyed by Seller after two (2) consecutive years have elapsed
without Buyer ordering the Products manufactured using Buyer’s Property.

09/22
Also, Seller shall not be responsible for any loss or damage to Buyer’s financial distress, insolvency, bankruptcy, or other similar conditions affecting
Property while it is in Seller's possession or control. one of the parties, affiliates and/or subcontractors. An event of force majeure
10. Special Tooling. Seller may impose a tooling charge for any Special in the meaning of these Terms means any circumstances beyond Seller’s
Tooling. Special Tooling shall be and remain Seller's property. In no event will control that permanently or temporarily hinders performance, even where that
Buyer acquire any interest in the Special Tooling, even if such Special Tooling circumstance was already foreseen. Buyer shall not be entitled to cancel any
has been specially converted or adapted for manufacture of Goods for Buyer orders following its claim of an event of force majeure.
and notwithstanding any charges paid by Buyer. Unless otherwise agreed, 17. Waiver and Severability. Failure to enforce any provision of these
Seller has the right to alter, discard or otherwise dispose of any Special Terms will not invalidate that provision; nor will any such failure prejudice
Tooling or other property owned by Seller in its sole determination at any time. either party’s right to enforce that provision in the future. Invalidation of any
11. Security Interest. To secure payment of all sums due from Buyer, provision of these Terms shall not invalidate any other provision herein and,
Seller retains a security interest in all Products delivered to Buyer and, Buyer’s the remaining provisions will remain in full force and effect.
acceptance of these Terms is deemed to be a Security Agreement under the 18. Duration. Unless otherwise stated in the Quote, any agreement
Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute governed by or arising from these Terms shall: (a) be for an initial duration of
and file on Buyer's behalf all documents Seller deems necessary to perfect one (1) year; and (b) shall automatically renew for successive one-year terms
Seller’s security interest. unless terminated by Buyer with at least 180-days written notice to Seller or if
12. User Responsibility. Buyer, through its own analysis and testing, is Seller terminates the agreement pursuant to Section 19 of these Terms.
solely responsible for making the final selection of the Products and assuring 19. Termination. Seller may, without liability to Buyer, terminate any
that all performance, endurance, maintenance, safety and warning agreement governed by or arising from these Terms for any reason and at any
requirements of the application of the Products are met. Buyer must analyze time by giving Buyer thirty (30) days prior written notice. Seller may
all aspects of the application and follow applicable industry standards, immediately terminate, in writing, if Buyer: (a) breaches any provision of these
specifications, and any technical information provided with the Quote or the Terms, (b) becomes or is deemed insolvent, (c) appoints or has appointed a
Products, such as Seller’s instructions, guides and specifications. If Seller trustee, receiver or custodian for all or any part of Buyer’s property,(d) files a
provides options of or for Products based upon data or specifications provided petition for relief in bankruptcy on its own behalf, or one is filed against
by Buyer, Buyer is responsible for determining that such data and Buyer by a third party, (e) makes an assignment for the benefit of creditors;
specifications are suitable and sufficient for all applications and reasonably or (f) dissolves its business or liquidates all or a majority of its assets.
foreseeable uses of the Products. In the event Buyer is not the end-user of the 20. Ownership of Rights. Buyer agrees that (a) Seller (and/or its affiliates)
Products, Buyer will ensure such end-user complies with this paragraph. owns or is the valid licensee of Seller’s IP and (b) the furnishing of information,
13. Use of Products, Indemnity by Buyer. Buyer shall comply with all related documents or other materials by Seller to Buyer does not grant or
instructions, guides and specifications provided by Seller with the Quote or the transfer any ownership interest or license in or to Seller’s IP to Buyer, unless
Products. If Buyer uses or resells the Products in any way prohibited by expressly agreed in writing. Without limiting the foregoing, Seller retains
Seller’s instructions, guides or specifications, or Buyer otherwise fails to ownership of all Software supplied to Buyer. In no event shall Buyer obtain
comply with Seller’s instructions, guides and specifications, Buyer any greater right in and to the Software than a right in a license limited to the
acknowledges that any such use, resale, or non-compliance is at Buyer's sole use thereof and subject to compliance with any other terms provided with the
risk. Further, Buyer shall indemnify, defend, and hold Seller harmless from any Software. Buyer further agrees that it will not, directly or through
losses, claims, liabilities, damages, lawsuits, judgments and costs (including intermediaries, reverse engineer, decompile, or disassemble any Software
attorney fees and defense costs), whether for personal injury, property (including firmware) comprising or contained within a Product, except and only
damage, intellectual property infringement or any other claim, arising out of or to the extent that such activity may be expressly permitted, either by
in connection with: (a) improper selection, design, specification, application, or applicable law or, in the case of open source software, the applicable open
any misuse of Products; (b) any act or omission, negligent or otherwise, of source license.
Buyer; (c) Seller’s use of Buyer’s Property; (d) damage to the Products from 21. Indemnity for Infringement of Intellectual Property Rights. Seller
an external cause, repair or attempted repair by anyone other than Seller, is not liable for infringement of any Intellectual Property Rights except as
failure to follow instructions, guides and specifications provided by Seller, use provided in this Section. Seller will defend at its expense and will pay the cost
with goods not provided by Seller, or opening, modifying, deconstructing, of any settlement or damages awarded in an action brought against Buyer
tampering with or repackaging the Products; or (e) Buyer’s failure to comply based on a third-party claim that one or more of the Products infringes the
with these Terms, including any legal or administrative proceedings, collection Intellectual Property Rights of a third party in the country of delivery of the
efforts, or other actions arising from or relating to such failure to comply. Seller Products by Seller to Buyer. Seller's obligation to defend and indemnify Buyer
shall not indemnify Buyer under any circumstance except as otherwise is contingent on Buyer notifying Seller within ten (10) days after Buyer
provided in these Terms. becomes aware of any such claim, and Seller having sole control over the
14. Cancellations and Changes. Buyer may not cancel or modify, defense of the claim including all negotiations for settlement or compromise. If
including but not limited to movement of delivery dates for the Products, any one or more Products is subject to such a claim, Seller may, at its sole
order for any reason except with Seller's written consent and upon terms that expense and option, procure for Buyer the right to continue using the
will indemnify, defend and hold Seller harmless against all direct, incidental Products, replace or modify the Products to render them non-infringing, or
and consequential loss or damage and any additional expense. Seller, at any offer to accept return of the Products and refund the purchase price less a
time, may change features, specifications, designs and availability of reasonable allowance for depreciation. Seller has no obligation or liability for
Products. any claim of infringement: (i) arising from information provided by Buyer
(including Seller’s use of Buyer’s Property); or (ii) directed to any Products for
15. Assignment. Buyer may not assign its rights or obligations without the
which the designs are specified in whole or part by Buyer; or (iii) resulting from
prior written consent of Seller.
the modification, combination or use in a system of any Products. The
16. Force Majeure. Seller is not liable for delay or failure to perform any of its foregoing provisions of this Section constitute Seller's sole and exclusive
obligations by reason of any events or circumstances beyond its reasonable liability and Buyer's sole and exclusive remedy for claims of infringement of
control. Such circumstances include without limitation: accidents, labor Intellectual Property Rights.
disputes or stoppages, government acts or orders, acts of nature, pandemics,
22. Governing Law. These Terms, the terms of any Quote, and the sale and
epidemics, other widespread illness, or public health emergency, cyber related
delivery of all Products are deemed to have taken place in, and shall be
disruptions, cyber-attacks, ransomware sabotage, delays or failures in delivery
governed and construed in accordance with, the laws of the State of Ohio, as
from carriers or suppliers, shortages of materials, sudden increases in the
applicable to contracts executed and wholly performed therein and without
price of raw material or components, shutdowns or slowdowns affecting the
regard to conflicts of laws principles. Buyer irrevocably agrees and consents to
supply of raw materials or components, or the transportation thereof, oil
the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio
shortages or oil price increases, energy crisis, energy or fuel interruption, war
with respect to any dispute, controversy or claim arising out of or relating to
(whether declared or not) or the serious threat of same, riots, rebellions, acts
the sale and delivery of the Products.
of terrorism, embargoes, fire or any reason whether similar to the foregoing or
otherwise. Seller will resume performance as soon as practicable after the 23. Entire Agreement. These Terms, along with the terms set forth in the
event of force majeure has been removed. All delivery dates affected by an Quote, forms the entire agreement between the Buyer and Seller and
event of force majeure shall be tolled for the duration of such event of force constitutes the final, complete and exclusive expression of the terms of sale
majeure and rescheduled for mutually agreed dates as soon as practicable and purchase. In the event of a conflict between any term set forth in the
after the event of force majeure ceases to exist. The right to allocate capacity Quote and these Terms, the terms set forth in the Quote shall prevail. All
is in the Seller’s sole discretion. An event of force majeure shall not include prior or contemporaneous written or oral agreements or negotiations with

09/22
respect to the subject matter shall have no effect. No modification to these
Terms will be binding on Seller unless agreed to in a writing that is signed
by an authorized representative of Seller, excluding email correspondence,
'clickwrap' or other purported electronic assent to different or additional
terms. Sections 2-25 of these Terms shall survive termination or
cancellation of any agreement governed by or arising from these Terms.
24. No ‘Wrap’ Agreements/No Authority to Bind. Seller’s clicking any
buttons or any similar action, such as clicking “I Agree” or “Confirm,” to utilize
Buyer’s software or webpage for the placement of orders, is NOT an
agreement to Buyer’s Terms and Conditions. NO EMPLOYEE, AGENT OR
REPRESENTATIVE OF SELLER HAS THE AUTHORITY TO BIND SELLER
BY THE ACT OF CLICKING ANY BUTTON OR SIMILAR ACTION ON
BUYER’S WEBSITE OR PORTAL.
25. Compliance with Laws. Buyer agrees to comply with all applicable
laws, regulations, and industry and professional standards, including those of
the United States of America, and the country or countries in which Buyer may
operate, including without limitation the U.S. Foreign Corrupt Practices Act
(“FCPA”), the U.S. Anti-Kickback Act (“Anti-Kickback Act”), U.S. and E.U.
export control and sanctions laws (“Export Laws”), the U.S. Food Drug and
Cosmetic Act (“FDCA”), and the rules and regulations promulgated by the U.S.
Food and Drug Administration (“FDA”), each as currently amended. Buyer
agrees to indemnify, defend, and hold harmless Seller from the consequences
of any violation of such laws, regulations and standards by Buyer, its
employees or agents. Buyer represents that it is familiar with all applicable
provisions of the FCPA, the Anti-Kickback Act, Export Laws, the FDCA and
the FDA and certifies that Buyer will adhere to the requirements thereof and
not take any action that would make Seller violate such requirements. Buyer
represents and agrees that Buyer will not make any payment or give anything
of value, directly or indirectly, to any governmental official, foreign political
party or official thereof, candidate for foreign political office, or commercial
entity or person, for any improper purpose, including the purpose of
influencing such person to purchase Products or otherwise benefit the
business of Seller. Buyer further represents and agrees that it will not receive,
use, service, transfer or ship any Products from Seller in a manner or for a
purpose that violates Export Laws or would cause Seller to be in violation of
Export Laws. Buyer agrees to promptly and reliably provide Seller all
requested information or documents, including end-user statements and other
written assurances, concerning Buyer’s ongoing compliance with Export Law.

09/22
Parker Hannifin Corporation
Pneumatic Division
8676 E. M89
Richland, MI 49083 USA
phone 269 629 5000

Applications Engineering: pdn.technical@support.parker.com

Customer Support: pdn.support@support.parker.com
www.parker.com/pneumatics

Catalog: 0760P 02/2025

© 2025 Parker Hannifin Corporation