SERVICING TOOLS for AC systems

2008 Catalogue
PLICAT08UK

2008
Delphi offers a complete range of tools for AC system maintenance, diagnosis and repairing. Due to Delphis extensive knowledge and experience in vehicle AC systems, Delphi has designed and developed a specific line including service stations for refrigerant charging/ discharging, recovery and reclaim, leak detection systems, thermometers and humidity detectors and AC system repairing kits.

Service stations

A complete range of service stations for refrigerant charging/discharging, recovery and reclaim. Every model is in compliance with CE and PED regulations

Leak detection systems

A wide range of essential tooling for refrigerant leak detection on vehicle AC systems

Anti-bacterical treatment
These products have been chosen for treating the bacteria that forms in AC systems, that emits unpleasant odours

AC flushing

These kits are designed to remove oil and particles trapped in the system that could cause component damage and system malfunction

Others

All required to help the garages in AC system servicing

The right is reserved by Delphi to change design & specifications of the products and accessories illustrated in this publication at any time without notice

A C E G I

Temperature and humidity detectors

Accurate and reliable instruments for specialists and garages

Lubricants

A huge choice of lubricants for compressors and service stations

Pipes, hoses and O-Rings Kits

A vast range of tools for repairing and replacing pipe and hoses. Kits for replacing original O-Rings, valve caps and valve cores for the most important European car applications

Compressors maintenance
Kits for compressor maintenance

Spare parts for servicing tools

Spare parts for Delphi servicing tools.

B D F H L

SERVICING TOOLS FOR AC SYSTEMS SERVICING TOOLS FOR AC SYSTEMS

SERVICING TOOLS FOR AC SYSTEMS

2008

A1
Back

REFMATIC POWER - AT41500P

FULLY AUTO

Overview The Refmatic POWER is completely automatic, but the operator can choose the manual operating mode. The high performance vacuum pump and the powerful compressor have been included for the user who needs to maintain all AC systems including high capacity ones (example: Coaches). This model is provided with a wide display and a software, with all information on the charging cycle, selectable in 15 different languages, as well: UK - D - F - E - I - POR - NL - PL - GR - CZ - SF - SK - SLO - TK - HU. It's supplied with a memory card key, necessary to start the machine, that integrates a car's database (over 40 car makes and over 1000 car models) selectable per make, model, prod. year, engine, engine type, refrigerant type, compressor oil and refrigerant quantity needed. Customers can purchase an updated key on an annual basis, with additional vehicle applications. It is equipped with a customised graphic printer to produce all information of the charging cycle. General characteristics

Enlarged high definition manometers; the pressure gauge system is fitted with spherical valves to reduce the load loss. Refrigerant recovery and reclaim from AC system in one operation Recovered/reclaimed refrigerant stored in a rechargeable tank (provided with safety valves) Integrated dye injector, to detect possible leak. Air and humidity removal prior to recharging of the AC system AC system recharging with display of the charged gas quantity. Above functions are push-button activated and controlled by electronic scale; minimum operation required for ease and simplicity of use Highly absorbent de-humidifying filter, combined with a mechanical filter to eliminate possible impurity in the recovered refrigerant Sensor to allow controlled discharge of non-condensing gas remaining in the tank. Sturdy customised chassis design, with 4 wheels, two of which are braked.

Specific characteristics The Refmatic POWER is equipped with two mode software: Automatic Program, to enter to the car's database User Program, manual option Automatic Program. It's possible to select the car's model through the database or just filling in the refrigerant quantity to charge. It allows you to select recovering, reclaiming and recharging operations in a completely automatic way. The user can check on the display all information about each single step of the process (including the integrity of the AC system by means of the electronic vacuometer). The electronic vacuometer produces a warning sound if pressure leakages are detected, and stops any further processes. User Program. It allows control of all operations manually. All the modes are available (vacuum and charge capacity, electronic vacuometer, electronic weighing of the refrigerant, discharged oil and oil to be charged, etc.). Other important characteristics of the Refmatic POWER AT41500P: Printer The customised printer is able to produce a specific report for each working step with the following information: Recovered refrigerant quantity Discharged oil quantity Possible reintegrated oil quantity Possible reintegrated dye quantity Possible reintegrated refrigerant quantity Electronic scale The Refmatic POWER is equipped with 4 electronic scales: for the refrigerant (tank), for the dye, for the discharged oil and for the charged oil. Others Condenser with fan, for better efficiency Heating belt Automatic oil discharge Totally automatic oil charge Totally automatic dye charge For further information, see technical data.

SERVICE STATIONS

SERVICING TOOLS FOR AC SYSTEMS

2008

A2
Back

REFMATIC ACTIVE - AT41500A

Overview

FULLY AUTO

The Refmatic ACTIVE is completely automatic, but the operator can choose the manual operating mode. This model is provided with a wide display and a software, with all information on the charging cycle, selectable in 15 different languages, as well: UK - D - F - E - I - POR - NL - PL - GR - CZ - SF - SK - SLO - TK - HU. It's supplied with a memory card key, necessary to start the machine, that integrates a car's database (over 40 car makes and over 1000 car models) selectable per make, model, prod. year, engine, engine type, refrigerant type, compressor oil and refrigerant quantity needed. Customers can purchase an updated key on an annual basis, with additional vehicle applications. It is possible to provide this model with a graphic printer to produce all information of the charging cycle. General characteristics

Enlarged high definition manometers; the pressure gauge system is fitted with spherical valves to reduce the load loss Refrigerant recovery and reclaim from AC system in one operation Recovered/reclaimed refrigerant stored in a rechargeable tank (provided with safety valves) Integrated dye injector, to detect possible leak Air and humidity removal prior to recharging of the AC system AC system recharging with display of the charged gas quantity Above functions are push-button activated and controlled by electronic scale; minimum operation required for ease and simplicity of use Highly absorbent de-humidifying filter, combined with a mechanical filter to eliminate possible impurity in the recovered refrigerant Sensor to allow controlled discharge of non-condensing gas remaining in the tank Sturdy customised chassis design, with 4 wheels, two of which are braked.

Specific characteristics The Refmatic ACTIVE is equipped with two mode software:

Automatic Program, to enter to the car's database User Program, manual option

Automatic Program. It's possible to select the car's model through the database or just filling in the refrigerant quantity to charge. It allows you to select recovering, reclaiming and recharging operations in a completely automatic way. The user can check on the display all information about each single step of the process (including the integrity of the AC system by means of the electronic vacuometer). The electronic vacuometer produces a warning sound if pressure leakages are detected, and stops any further processes.

SERVICE STATIONS

User Program. It allows control of all operations manually. All the modes are available (vacuum and charge capacity, electronic vacuometer, electronic weighing of the refrigerant, discharged oil and oil to be charged, etc.). Other important characteristics of the Refmatic ACTIVE AT41500A: Printer (AT41573) The customised printer, offered as optional, is able to produce a specific report for each working step with the following information: Recovered refrigerant quantity Discharged oil quantity Possible reintegrated oil quantity Possible reintegrated dye quantity Possible reintegrated refrigerant quantity

Printer AT41573

Electronic scale The Refmatic ACTIVE is equipped with 4 electronic scales: for the refrigerant (tank), for the dye, for the discharged oil and for the charged oil. Others Automatic oil discharge Totally automatic oil charge Totally automatic dye charge For further information, see technical data.

SERVICING TOOLS FOR AC SYSTEMS

2008

A3
Back

REFMATIC PLUS - AT41502

Overview AT41502 is semiautomatic, provided with vacuum pump.

SEMI AUTO

This Refmatic is particularly suitable for AC systems which need a refrigerant quantity less than 1 Kg (usually, all cars and special agricultural machines, except for coaches). General characteristics (for all service stations)

Enlarged high definition manometers; the pressure gauge system is fitted with spherical valves to reduce the load loss Refrigerant recovery and reclaim from AC system in one operation Recovered/reclaimed refrigerant stored to a rechargeable tank (provided with safety valves) Air and humidity removal prior to recharging of the AC system AC system recharging with display of the charged gas quantity Above functions are push-button activated and controlled by electronic scale. Minimum operation required for ease and simplicity use Highly absorbent de-humidifying filter to eliminate possible impurity in the recovered refrigerant Oil injector fitted with non-return valve, to eliminate oil contamination Sensor to allow controlled discharge of non-condensing gas remaining in the tank. Supply / service hoses, leak resistant, provided with quick fitting couplings with patented valve system Sturdy customised chassis design, with 4 wheels, two of which are braked

Specific charateristics The Plus model is provided with a vacuum pump with automatic stop, and electronic guard for pressure return of the refrigerant; the pump is automatically activated, with a double valve security system. The pressure gauges manifold is provided with 2 metre hoses (from the manifold to the Refmatic) and 2 metre hose (from the manifold to the car) - total 4 metres from the car and the Refmatic. For further information, see technical data.

SERVICE STATIONS

SERVICING TOOLS FOR AC SYSTEMS

2008

A4
R e f rige ra nt

R E F M A T IC P O WE R A T 4 15 0 0 P R1 34a auto matic (with auto matic o il injectio n) Electro nic scale +/- 1 g 0 Electro nic scale +/- 1g 3m auto matic 99 kg 63 x 1 x 63 cm 24 230 V 50/60 Hz 700 W 1 / 50C 0 HP - BP (pulse free) 1 cc 4 450 g/min 400cc 1 m/ h 4 0,05 mbar 560 W 800 cc 041 97/0 1 25 kg 1 48g CE P ED

R E F M A T IC A C T IV E A T 4 15 0 0 A R1 34a auto matic (with auto matic o il injectio n) Electro nic scale +/- 1 g 0 Electro nic scale +/- 1g 3m auto matic 99 kg 63 x 1 x 63 cm 24 230 V 50/60 Hz 700 W 1 / 50C 0 HP - B P (pulse free) 9 cc 250 g/min 300cc 6 m/ h 0,05 mbar 250 W 280 cc 041 97/0 1 1 kg 0 1 48g CE P ED

R E F M A T IC P LUS A T 4 15 0 2 R1 34a semi-auto matic (witho ut auto matic o il injectio n) Electro nic scale +/- 1 g 0 no 2 m +2 m auto matic 70 kg 52 x 1 x 62 cm 20 230 V 50/60 Hz 700 W 1 / 50C 0 HP - B P (pulse free) 9 cc 250 g/ min 300cc 6 m/ h 0,05 mbar 250 W 280 cc 041 97/0 1 1 kg 0 1 48g CE P ED

Back

C o nt ro ls R e f rige ra nt we ighing a c c ura c y O il we ighing a c c ura c y S e rv ic e ho s e s le ngt h A ir a nd inc o nde ns a ble ga s purge T o ta l we ight D im e ns io ns P o we r s upply P o we r c a pa c it y O pe ra ting t e m pe ra t ure ra nge M a no m e te rs ( pre s s ure ga uge s ) H e rm e t ic c o m pre s s o r dis pla c e m e nt R e c o v e ring re f rige ra nt c a pa c it y C o m pre s s o r o il qua nt it y V a c uum pum p c a pa c it y V a c uum m a x. V a c uum pum p po we r V a c uum pum p o il qua nt it y V a c uum pum p o il t ype T a nk c a pa c it y D e hydra t o r f ilt e r D e hydra t o r f ilt e r c a pa c it y ( hum idity a bs o rpt io n) R e gula t io ns c o m plia nc e

COVER FOR SERVICE STATIONS - AT41410

Simple and practical, protect the service stations when not used.

SERVICE STATIONS

HEATING BELT FOR REFRIGERANT TANK - AT41572

Suitable for keeping the refrigerant at the proper charging pressure.

SERVICING TOOLS FOR AC SYSTEMS

2008

A5
Back

REFMATIC FRIGO - AT41522

R404a - REFRIGERATION SYSTEMS

Overview Semi-automatic service station, provide with vacuum pump. This Refmatic is suitable for the maintenance and the charge of all AC systems containing R404a refrigerant. General characteristics

One-step refrigerant recovery and reclamation from chilling / freezing system. Refrigerant storage and display of the amount recovered Evacuation of air and moisture from the system before the recharging Automatic stop of the vacuum pump Automatic start-up of the vacuum pump (double solenoid valve) Automatic recharging of the system with high-precision display of the amount added The above functions are programmed via keyboard and controlled by an electronic scale

Technical data Refrigerant Controls Weighing accuracy - Refrigerant Weighing accuracy - Oil Hose length Air discharge Weight Dimension Power supply Power rating Temperature range Manometer Compressor displacement Vacuum pump Oil compressor capacity Vacuum pump capacity Maximum vacuum rate Power rating vacuum pump Oil vacuum pump capacity Vacuum pump oil Tank capacity Number of receiver driers Dehumidifying filter capacity Safety Standard R404a semi-automatic (without automatic oil injection) by electronic scale + / - 10 g no 2m + 2m automatic 70 Kg 65x54x120 cm 230 V 50/60 Hz 650 W 10 / 50C1 HP - BP (no glicerine) - Kl. 1.0 14 cms 250 g / min 330 cc 4.3 m3/h 0,1 mbar 350 W 350 cc 041197/0 12 kg 1 186 g CE - TUV - PED

SERVICE STATIONS

SERVICING TOOLS FOR AC SYSTEMS

2008

A6
Back

PORTABLE CHARGING STATION FOR R134a/R22/R407/R507 - AT41147

Main characteristics Portable charging unit for use in leak checks and pressure tests. Can evacuate air and moisture from AC systems and refill with refrigerant. Refrigerant can also be heated during charging. Can measure vacuum level and achieve - 0,8 bar. The unit has supply hoses with quick fit double connectors for R134a. Due to its light weight and small size, this unit is particularly recommended for out of workshop use (agricultural equipment, earthmoving equipment and domestic applications). This unit does not recover refrigerant. Technical data Safety requirements meet with CE standards Refrigerant Cylinder capacity Cylinder Scale Single stage vacuum pump Vacuum level attainable in AC systems Pump oil requirement Vacuum pump oil type Noise level Temperature range Storage temperature Power rating Input current Power supply Dimensions (cm) R134a / R22 / R407 / R507 2,2 kg R134a / R22 / R407 / R507 70 L/min 7x10-2 bar 210 cm3 041197/0 < 70dB (A) from 0 C to 40 C from -25 C to +55 C 220 W 1,8 A 220 V - 50 Hz 58x20x58

PORTABLE REFRIGERANT RECOVERY UNIT - AT41544

This portable unit is provided with a distiller this is to enable it to perform both recovery and recycling functions. The oil-less compressor inside the machine, can recover (in liquid and / or vapour) all CFC HCFC HFC refrigerants (R410a included). The recovered oil is discharged into a graduated bottle, so that it can be measured. The refrigerant recovery unit is provided with a dehydrator filter, which can easily be replaced. Technical data Recover capacity Vapour, up to 15 kg / hour Liquid, up to 45 kg / hour Special function, up to 200 kg / hour (*) up to 5 kg / hour 230 Volt / 50-60 Hz 525 W 17,6 kg

SERVICE STATIONS

Recycling capacity Power supply Power Weight

(*) This mode (high performance) requires tank with double suction device, and the AC system must have both ports (low pressure port and high pressure port)

SERVICING TOOLS FOR AC SYSTEMS

2008

B1
Back

THERMOMETER - AT41390
Main characteristics An inexpensive, reliable and accurate instrument for showing interior and exterior vehicle temperatures. LCD display in C and F. Technical data Temperature range Temperature reading accuracy Normal working conditions from -20 to +120 C 0,3 C between -20 and +120 C from 0 C to +50 C with max 95% RH.

INFRARED DIGITAL THERMOMETER - AT41562

Main characteristics This tooling permiits a quick temperature survey through a laser layer. Especially appropriate when the temperature to detect is in a very restricted area or not easily reachable or far from the operator.It is provided of a LCD display for temperature reading in C or F. The back lighting display permits a optimal reading in case of low illumination. Technical data Automatic switch off system Temperature range from -20 to +420 C 17 x 4,4 x 4 cm 200 g 0.1 C 500 m/s 1 x 9V battery 30 hours Dimensions Weight Resolution Response time Power supply Battery lenght

TEMPERATURE AND HUMIDITY

THERMOMETER-HYGROMETER - AT41404
Main characteristics This instrument is particularly suited for measuring temperature and humidity inside vehicles. LCD display of temperature in C and F in %RH. Temperature and humidity levels shown simultaneously. Automatic memory recall of max. and min. values of temperature and humidity. Handy pocket clip can also be used for fixing the instrument inside a vehicle. Battery life (LR-44 x 2) is approx. 4400 hours of continuous use. Technical data Temperature range Humidity range Temperature reading accuracy Humidity reading accuracy Power supply from 0 to +50 C from 2% RH to 98% RH 1 C from 0 to 40 C / 2 C fo other ranges 5% RH from 40%RH to 80% RH between +15 and +40 C 2 x LR-44 batteries

SERVICING TOOLS FOR AC SYSTEMS

2008

C1
Back

LEAKAGE DETECTION KIT - NITROGEN PRESSURE - AT41542 & AT41542UK ()

This kit is provided with a class 1 manometer. The kit can detect vary small leakages. This kit can also be used to verify the settings of the pressure switches and manometer units. Technical data Inlet pressure Outlet pressure Connections Manometer Adapter Flexible hose 20 MPa 0,5 4,8 MPa SAE 80 mm diameter, class 1.0 (defined sectors), provided with positioning indicator and calibration screw 5/16 SAE F x SAE M (connection for R410a systems) SAE - 1,5 meter

() AT41542UK is differentiated with a 7/8 14UNS adapter, only suitable for UK market (please check your nitrogen bottle connection type and order accordingly).

REFRIGERANT DETECTION KIT - AT41550

Provided with a complete friendly user and ergonomic injection gun, hose with R134a quick coupler, 12 V UV lamp, dye bottle, goggles and dye cleaner bottle.

LEAK DETECTION SYSTEMS

MANUAL INJECTION SYSTEM FOR DYES (GUN + DYE BOTTLE) - AT41551

This product injects a single dye dose into the AC system; the injection pressure is 11 bar (150 psi). This product prevents air from entering AC system by means of a built-in feature. Very easy to operate; a solid tool made of rugged materials to withstand the toughest workshop. The product components are: injection gun, hose with R134a quick coupler, dye bottle (64 doses), R12 adapter, purge valve. Case included.

SERVICING TOOLS FOR AC SYSTEMS

2008

C2
Back

FITTINGS FOR DYE INJECTION - AT41353

Main characteristics The kit has universal fittings and can be used on any type of R134a charging station. There is a calibrated container, which allows the introduction of exactly the right amountof liquid detector into the AC system and avoids the creation of air bubbles, which can damage the systems efficiency. The kit can also be used with single dose additive capsules for R134a through a 1/2" ACME connector.

UV DYES FOR LEAK DETECTION

Suitable for leak detection tools, are available in different bottle sizes, for every necessity.

AT41555 AT41552 AT41553 AT41554

1 bottle (32 doses, provided with one dose measurer) 1 bottle (64 doses) 4 bottles (32 doses each) 6 bottles (16 doses each)

LEAK DETECTION SYSTEMS

UV LAMP WITHOUT SUPPLY CABLE, WITH BATTERY CHARGER - AT41556

Main characteristics This product is a cordless rechargeable UV lamp, can be used when the other lamps are limited by their cord. The battery charger and goggles are included.

UV LAMP WITH SUPPLY CABLE (12V) AND GOGGLES - AT41549

Main characteristics Indispensable when searching for refrigerant leaks from car AC systems. The UV lamp runs on a 12V supply and can be connected directly to the car battery. Power rating 50W. The 4-meter cable allows for the inspection of almost any type of vehicle. The lamp requires no pre-heating, is extremely light and sturdy and can be used in even the most difficult conditions. Other characteristics The liquid detector particles show up in the fluorescent UV light. The bulb life is about 3000 hours of intermittent use. The special goggles (supplied) not only protect the operators eyes but also enhance the fluorescence of the liquid detector (dye).

SERVICING TOOLS FOR AC SYSTEMS

2008

C3
Back

SAFETY GOGGLES - AT41559

These goggles are designed for providing essential impact protection to the wearers eyes, so as not to get hurt from recoiling or ejecting objects. It protects from the impact equivalent to the power caused by a steel ball of 44 g at a velocity of 50 m/s.

UV DYE CLEANER
Essential to remove UV dye residues. Available in two different sizes.

AT41557 AT41558

6 bottles (240 ml each) 6 bottles (123 ml each)

ELECTRONIC LEAK DETECTOR - AT41570

Main characteristics This refrigerant leak detector has an electro-chemical sensor made of ceramic substrate covered with a reagent. The sensor is kept at a high temperature by an in-built mechanism. It is sensitive to all CFCs (R12, R11), HFCs (R134a) and HCFCs (R22, R123). When one of these halogen gases comes in contact with the hot surface, the chlorine, fluorine and bromine atoms separate from their molecules and ionise. This produces an electrical current that, passing through the ceramic material, reaches an electrode in the centre of the sensor. The detector is automatic and does not have to be set for a particular type of refrigerant. It compensates automatically for variations in background contamination and humidity. An audible variable pitch signal pinpoints the exact source of the leak. Technical data Sensitivity to CFC, HFC, HCFC (3 way) Contamination adjustment Power source Weight with batteries Temperature range in working conditions Dimensions Certifications 3 g per year automatic 2 type C alkaline batteries 700 g from -27 to +50 C 21,5x8,8x5,7 cm UL - CE

LEAK DETECTION SYSTEMS

SERVICING TOOLS FOR AC SYSTEMS

2008

D1
Back

PAG OIL FOR AC COMPRESSORS AT41245

ISO 46 Ford (FX15, FS10) - Harrison, GM, Delco (CVC) - Honda (Hadsys), Matsushita (Scroff) - Mitsubishi (Scroll) Nippondenso (10P,10PA, CA, SC, SB, SE) - Panasonic (Scroll) Sanden (SD7H Type C, SD7B10, SD7V, TR Scroll) Diesel Kiki (CD17, DCW17, 13CH, 15CH) - Tama Seiskusyo (16CH, 17CH, DKS26, TM31) Unicla (Z145, Z150, Z170) York/CCI (206, 209, 210) (250cc tin)

AT41238

ISO 100 Nippondenso (TV) - Sanden (SD5H, SD7H Type A&B) Seiko Seiki (SS Rotary) - Seltec (DKV-14C&D.,KC45&50) Zexel (All piston compressor) (250cc tin) ISO 150 Harrison, GM, Delco (A6, R4, HR6, V5, HR17) (250cc tin)

AT41244

ESTER OIL FOR AC COMPRESSORS AT41384 AT41385 AT41391

ISO 100 Supply of RL100S R12-R134a Ester oil (1 litre tin) ISO 100 Supply of RL100S R12-R134a Ester Oil (12x1litre tins) ISO 150 Supply of RL150S R12-R134a Ester Oil (1 litre tin)

OIL FOR SERVICE STATIONS 041197/0

Oil for vacuum pump

LUBRICANTS

SERVICING TOOLS FOR AC SYSTEMS

2008

E1
Back

ANTI-BACTERIAL
Two anti-bacterial treatments have been chosen for treating the bacteria that forms in the ducting, heat exchangers and evaporating system and emits unpleasant odours. The treatments meet very restrictive toxicological and working condition requirements.

AT41428 AT41434 AT41567

ACAT 30 - HEAVY DUTY anti-bacterial treatment - 400 ml - Foam Supplied in cartons of 12 units ACAT 40 - STANDARD anti-bacterial treatment - 400 ml - Spray Supplied in cartons of 12 units ACAT 40 - STANDARD anti-bacterial treatment (Grenade type application) Single-dose Kit for bus and camper - 200 ml - Spray Supplied in cartons of 12 units ACAT 30 & ACAT 40 (Grenade type application) - Single-dose Kit - 50 ml Supplied in cartons of 28 units (14 of each)

AT41566

AIR SANITIZER - AT41532

The sanitizer is a professional ozone generator of high capacity which, thanks to the ozone strong oxidizing power, fights against bacteria, moulds and mites and dissolves bad smells, such as smoke of cigarette, pet odours, etc.... Perfect to sanitize the following places:

ANTI-BACTERIAL TREATMENT

vehicles air conditioning and ventilation systems driver and passenger compartment and drivers cabins campers and caravans trains carriages boats

Equipped with 230V power and 12V car adapter. Technical data Capacity Power supply Timer Working temperature Weight Dimension 100 mg/h 230V - 50 Hz 5 selectable programmes (5 - 15 - 30 - 45 - 60) from 0 to 50 C 1,2 kg 175 x 125 x 115 mm

SERVICING TOOLS FOR AC SYSTEMS

2008

F1
Back

CRIMPER - AT41397
Meets with CE safety requirements. The tool is very light, sturdy and easy to use. It is in high resistance light alloy with high-grade steel stud-bolts and the main screw is on bearings. Quick change crimping elements according to the size required. Can be transformed into a manual hydraulic or semi-automatic crimper with the attachment shown in photos 2/3/4. The crimper without accessories is key operated with a vice support. Approx. weight: 2 Kg Possible combinations 1+2 = crimper used manually 1+3+4 = crimper used with pneumatic/hydraulic assistance

1
MANUAL POWER UNIT FOR CRIMPER - AT41396
Meets with CE safety requirements. Can be used with other types of crimpers. This hydraulic pump allows the operation of the crimper practically anywhere without the need for an electrical or compressed air supply. Technical data Weight: 1,1 kg Crimping power: approx. 5,6 t at 700 bar Crimp holding strength: up to 140 bar

PIPE AND HOSES REPAIRING

HYDRAULIC ADAPTER - AT41395

This accessory is for use with power unit AT41374. Technical data Crimping power: approx. 5,6 t at 700 bar Crimp holding strength: up to 140 bar Flexible extension: 1,8 m

PNEUMO-HYDRAULIC POWER UNIT FOR CRIMPER - AT41374

Meets with CE safety requirements. The unit is pneumatically operated and is activated by a built-in pedal. The unit is connected to a compressed air line using standard couplings and allows work to be carried out at the workbench with no physical effort required. Technical data Working pressure of compressed air line: from 5 to 8 bar Weight: 10 kg Dimensions: 30 x 15 x 27 cm Working pressure: 700 bar

SERVICING TOOLS FOR AC SYSTEMS

2008

F2
Back

CRIMPING MACHINE WITH 8 DIES

A new crimping machine with 8 dies, to crimp hoses of A/C and cooling systems in different sectors. The system with 8 dies allows elimination of pressure leak from the fittings. The crimper can be open thus allowing the crimping of special and difficult elbows. Two versions available: Manual pump and integrated piston -

AT41571

With hydraulic handle in titanium alloy, hose and adapter to be matched to the pneumo-hydraulic power unit AT41374

AT41574,

RUBBER HOSE CUTTER - AT41097

Tool for precision cuts in rubber refrigerant hoses.

PIPE AND HOSES REPAIRING

METAL PIPE CUTTER - AT41424

Tool for precision cuts in metal refrigerant pipes of 3-16 mm.

PLIERS FOR FRIGOCLIC AND REFRIMASTER - AT41546

For an easily clamping/ releasing of Frigoclic / Refrimaster hose clamps.

SERVICING TOOLS FOR AC SYSTEMS

2008

F3
Back

RUBBER HOSES Specific hose for R134a

Code SSP90006G2G20 SSP90006G2G SSP90008G2G20 SSP90008G2G SSP90010G2G20 SSP90010G2G SSP90012G2G20 SSP90012G2G Type small size (06) small size (06) medium size (08) medium size (08) large size (10) large size (10) large size (12) large size (12) Refrigerant R134a R134a R134a R134a R134a R134a R134a R134a Length 20 m 50 m 20 m 50 m 20 m 50 m 20 m 50 m

Reduced diameter for R134a

Code 90006GN1 90008GN1 90010GN1 90012GN1 Type small size (06) medium size (08) large size (10) large size (12) Refrigerant R134a R134a R134a R134a Length 20 m 20 m 20 m 20 m

Refrimaster for R134a and R404

Code 90006G2GRFR 90008G2GRFR 90010G2GRFR 90012G2GRFR Type small size (06) medium size (08) large size (10) large size (12) Refrigerant R134a and R404 R134a and R404 R134a and R404 R134a and R404

PIPE AND HOSES REPAIRING

CLAMPS FOR REFRIMASTER HOSES 0361778/0 0361779/0 0361780/0 0361781/0

for small hose (06) for medium hose (08) for large hose (10) for large hose (12)

SERVICING TOOLS FOR AC SYSTEMS

2008

F4
Back

REPAIRING TOOL FOR PRE-FORMED AIR CONDITIONING METAL PIPES - AT41379

Characteristics The Lokring joint is composed of two special bushes on a calibrated manifold tube. The tube passes over the ends of the two pipes to be joined creating a joint. Repair of any type of metal AC piping can be carried out in minutes using a Lokring joint, thus avoiding the replacement of entire piping systems and dangerous brazing or welding. A Lokring joint guarantees a perfect repair. The equipment is also ideal for designing a piping system of any shape or size by combining straight lengths with the assorted joints available (straight, at 30, etc.). The complete list of joints are included in the kit. The joints can be purchased individually. The cost of this equipment can easily be recovered after only 3 or 4 repairs. Making a Lokring joint The joint is made using a special ratchet crimping hand tool that has four pairs of gripping jaws. Used in combination with a small quantity of Lokprep (supplied), a perfect seal can be made even when the tubes to be jointed are not perfect (Fig. 5). Illustrated example - Clean the ends of the tubes to joined (Fig. 1) - Apply Lokprep sealant to both ends (Fig. 2) - Insert both ends inside the correct Lokring joint (Fig. 3) - Seal with the crimping hand tool as shown (Fig. 4) Lokring joint technical data Highly resistant joints with a nominal working pressure of 50 bar. Safety factor 1:4 (200 bar) Wide temperature working range: -50 > + 150 C High reliability: burst tests have shown that the burst point of the joint is higher than the burst point of the pipes. No special preparation required, simply remove dirt, grease or paint from the ends to be jointed. Fig. 1

PIPE AND HOSES REPAIRING

Other characteristics Lokring connectors come in either aluminium or brass. Where one of the tubes to be jointed is aluminium, use an aluminium connector. Use a brass connector with other metals. Different size joints are available for the different tube diameters. Tubes from 8 - 19 mm outside diameter can be repaired.

Fig. 2

Fig. 3

Fig. 4

SERVICING TOOLS FOR AC SYSTEMS

2008

F5
Back

FITTINGS FOR ORIGINAL PIPES REPLACEMENT

This equipment allows fast and economical replacement of any original tubing without having to wait for the arrival of original spare parts. The kit consists of two special adapters and a standard Delphi tube and connectors which, when put together, form an alternative to the original tubing. The flexibility of the tube makes for easy replacement and considerably cuts down installation times. There are numerous advantages to this system: - cheaper than original parts - reduced installation times - no waiting for spare parts - highly flexible use - single items of the kit can be ordered The following kits are available:

AT41440 AT41470 AT41480 AT41497 AT41512 AT41513 AT41514 AT41515 AT41516

for Alfa Romeo, Fiat and Lancia for Audi for Volkswagen for Alhambra, Galaxy and Sharan Adapter + flange kit compressor/evaporator Fiat 15 Adapter + flange kit compressor/evaporator Fiat 18 Flange kit for Sanden compressor Adapter kit for Sanden compressor (G10) Adapter kit for Sanden compressor (G8)

Original pipe

PIPE AND HOSES REPAIRING

Delphi pipe

SPRING-LOCK TOOLS
Kit for rapid, safe removal of OE refrigerant pipes.

AT41419

For all pipe sizes (3/8, 1/2, 5/8, 3/4) Ford, Volvo, Hyundai

AT41419

AT41429

For Opel and Volkswagen.

AT41429

SERVICING TOOLS FOR AC SYSTEMS

2008

F6
Back

TOYOTAS SPECIAL CLAMPS - AT41565

These clamps allow accurate connection on Toyota AC systems.

SPRINGLOCK RELEASERS AT41563

This single special tooling allow easy clamp releasing of the MB W211 hoses.

AT41564

This kit contains two HP and LP springlock releasers essential and user friendly to release the high and low pressure clamps on Smart vehicles.

THREAD RESTORATION TOOLS - AT41394 and AT41518

With these two kits all damaged threads can be easily repaired thus avoiding replacement of parts, for example the condenser or compressor due to simple thread damage.

PIPE AND HOSES REPAIRING

AT41394 AT41518
AT41394 5/8 18 UNF 3/4 16 UNF 7/8 14 UNF 1 14 UNF 1 1/16 UNF

for re-threading in inches (male / female) for re-threading in metric (male / female)

AT41518 M14x1,5 M16x1,5 M18x1,5 M20x1,5 M22x1,5 M24x1,5 M27x1,5 M28x1,5

AT41394

AT41518

SERVICING TOOLS FOR AC SYSTEMS

2008

F7
Back

ORIGINAL O-RING KITS, VALVE CAPS, VALVE CORE

Delphi has created kits for OE O-Rings and other parts like caps, valve cores, etc. that are suitable to replace most parts of the original air conditioning system for all automotive applications. TSP0695001 TSP0695002 TSP0695003 TSP0695004 TSP0695005 TSP0695006 TSP0695007 TSP0695008 TSP0695009 TSP0695010 TSP0695011 TSP0695012 TSP0695013 TSP0695015 TSP0695016 TSP0695017 TSP0695018 TSP0695019 TSP0695020 TSP0695023 TSP0695024 TSP0695025 TSP0695026 TSP0695027 TSP0695028 O-Ring kit Alfa Romeo O-Ring kit Audi-Volkswagen O-Ring kit BMW O-Ring kit Citron-Peugeot O-Ring kit Ford (1) O-Ring kit Ford (2) O-Ring kit Fiat O-Ring kit Mercedes O-Ring kit Opel (1) O-Ring kit Opel (2) O-Ring kit Renault O-Ring kit Rover O-Ring kit Volvo/Saab Valve core kit O-Ring kit for compressors O-Ring universal kit (1) Caps for service valves kit Washer kit for GM compressors Double O-Ring kit Service kit for Ford pipes Complete service kit O-Ring kit Suzuki-Mitsubishi O-Ring kit Honda-Nissan O-Ring kit Subaru-Toyota O-Ring kit Hyundai Set of Asian car kits, with holder (compounded of TSP0695025, TSP0695026, TSP0695027 and TSP0695028) O-Ring universal kit (2)

PIPE AND HOSES REPAIRING

TSP0695029 TSP0695030

The showed holder can contain up to 4 kits and can be ordered as TSP0695021.

SERVICING TOOLS FOR AC SYSTEMS

2008

G1
Back

AC FLUSHING KIT - AT41415/1

This kit consists of a 400 cc sturdy alloy bottle (with valve), hose, adapters kit, pistol, clamp and a container for flushing liquid recovery. It can be used with any suitable cleansing fluid (R141b, etc.) though we recommend AT41425. The flushing liquid is pressurised in the alloy bottle using compressed air or nitrogen through the inlet valve. The kit comes in a handy crate, which keeps all the contents together and also keeps the flushing liquid recovery container upright when receiving liquid under pressure. Flushing fluid not included.

AC FLUSHING FLUID - AT41425

This environmentally friendly solvent is non-toxic and contains no polluting substances such as surface-active agents, ether glycol or halogen hydrocarbons. It does not destroy or deform elastomer (rubber) and/or synthetic materials. Its flash point of 70C makes it much safer to use than benzene based solvents. It allows for the evacuation of oil and oil particles in suspension from the heat exchanger tubes (evaporator and condenser). The solvent drying time is compatible with the normal servicing requirements for AC systems. It is an ideal replacement for CFC-R113 and has excellent cleansing properties and rapid evaporation time. It is compatible with all refrigerants (CFC, HCFC, HFC). Supplied in a 5 litre container.

AC FLUSHING

SERVICING TOOLS FOR AC SYSTEMS

2008

G2
Back

DIAVIA CLEANER - AT41560

Cleaning station with solvent, designed for maintenance and cleaning of CAR AC systems. Process consists in the circulation of solvent in a pulsating way for loosening and removing impurities. Main characteristics Works with compressed air Additional pump to purge the solvent Suitable for every type of fitting, thanks to the universal cone attachment system 20 lt solvent tank with level gauge User friendly and effective, thanks to the additional nitrogen circuit, that permits: - to push out possible residue of solvent and humidity after the purge phase - to check for possible leaks Eyeglass to check the solvent cleaness Quick coupling on solvent/nitrogen circuits Pressure release safety system High quality nitrogen and air pressure gauge 180 cm hoses High capacity and easy-to-replace filter

Technical data Working pressure, cleaning circuit Working pressure, nitrogen circuit Liquid circulation max. pressure Filtering system Nitrogen circuit gauge Cleaning circuit gauge Dimensions Weight Min.-Max. 6-8 bar Min.-Max. 8-12 bar 17,4 litri/min external filter 25 bar (360 psi) 10 bar (144 psi) 120 x 55 x 54,5 cm 46 kg

DIAVIA CLEANER PLUS - AT41568

Cleaning station with solvent, designed for maintenance and cleaning of COACHES and BUS AC systems. Process consists in the circulation of solvent in a pulsating way for loosening and removing impurities. Main characteristics Works with compressed air Additional pump to purge the solvent Suitable for every type of fitting, thanks to the universal cone attachment system 20 lt solvent tank with level gauge User friendly and effective, thanks to the additional nitrogen circuit, that permits: - to push out possible residue of solvent and humidity after the purge phase - to check for possible leaks Eyeglass to check the solvent cleaness Quick coupling on solvent/nitrogen circuits Pressure release safety system High quality nitrogen and air pressure gauge 4 mt hoses. High capacity and easy-to-replace filter

AC FLUSHING

Technical data Working pressure, cleaning circuit Working pressure, nitrogen circuit Liquid circulation max. pressure Filtering system Nitrogen circuit gauge Cleaning circuit gauge Dimensions Weight Min.-Max. 6-8 bar Min.-Max. 8-12 bar 49,2 litri/min external filter 25 bar (360 psi) 10 bar (144 psi) 120 x 55 x 54,5 cm 48 kg

SERVICING TOOLS FOR AC SYSTEMS

2008

H1
Back

COMPRESSOR MAINTENANCE KIT - AT41520

The following electromagnetic compressor clutch assemblies may be changed using this equipment: Harrison: Sanden: Denso: Others: V5, HDA6, R4, A6. SD505, SD507, SD508, SD510, SD575, SD708, SD709, SD7H15, Various FS6, C171, 6P148 SD5H13

COMPRESSOR GUARD KIT - AT41569

This kit permits the fitting of a filter on the compressor suction inlet, to avoid the entrance of harmful material that can circulate into the AC system (metallic slags, rubber drosses,etc). The kit contains the tooling and some filters, available also as spare parts.

COMPRESSORS MAINTENANCE

SERVICING TOOLS FOR AC SYSTEMS

2008

I 1
Back

REFRIGERANT GAS ANALYSER - AT41543

This analyser is designed to enable you to avoid contamination of the refrigerant in your machines storage tank, when you recover refrigerant from an AC system. When contamination is detected, this information can be used, to help diagnose performance problems with the AC system. This unit can also be used to test new refrigerant quality Very easy to use: only one control (push button). Takes less than 1 minute to analyse the refrigerant and give you the results. This is a very easily maintained machine requiring the periodic changing of the filter on the front panel. The gauge meets the SAE J 1771 regulations. The analyser has an audible and visual alarm, produced when flammable hydrocarbons > 2% are detected. It is also provided with a 25 pins port for the connection to an external printer. Technical data Refrigerant Other substances Accuracy Resolution Repeatability Measurement time Operating temperatures Storage temperatures Power supply (cable for connection to the vehicle battery) Power supply adapter for 220 Volt (optional) Dimensions (cm) Weight R12, R134a, R22, HC (hydrocarbons) Hydrocarbons, Air 98% for the gas above, with system presence of R124 or R142b +/- 0,1 % by weight +/- 0,25% by weight Complete test cycle: less than 60 seconds from +10C to +49 C from -20 C to +70 C from 12 to 16 Vdc 1,5 A 10 w 220 Volt 50/60 Hz 20 x 13 x 7 2 Kg

AIR OPERATED HACKSAW - AT41066

Meets with CE requirements. An extremely versatile hacksaw for precise cutting of laminates and synthetic materials. Air connector: 1/4 GAS

FIN COMB - AT41409

Combs for re-aligning heat exchanger (condenser, evaporator).

OTHERS

SERVICING TOOLS FOR AC SYSTEMS

2008

I 2
Back

ORIFICE TUBES REPLACEMENT TOOL - AT41548

This kit was designed to allow easy removal of even seriously damaged expansion tubes and also assists in the replacement of new tubing.

VALVE CORE REMOVERS

For service valve maintenance and replacement. Two kinds of tool are available.

AT41521 AT41298

for Ford / Renault valves for standard valves

AT41298

AT41521

SPECIAL VALVE CORE REMOVERS

These tools (PURGE-MATE system) allow the replacement of defective valve cores, without discharging the AC system (valve blocked closed). AT41539

AT41540 AT41539

Service LP valve core Service HP valve core

AT41540

OTHERS

SERVICING TOOLS FOR AC SYSTEMS

2008

I 3
Back

SERVICE TOOLS - RETROFIT KIT

Retrofit extension hose - AT41416 This kit is for connecting a modified R12 system to R134a charging unit service valves. The restricted space does not usually permit direct connection to the valves so the extension hoses are connected to the AC unit and then to the R134a recharging unit.

Retrofit kit with standard adapter - AT41417 This kit contains all the necessary materials to convert an R12 system to an R134a. It contains all the O-rings, service valve adapter, labels and instructions. N.B.: You will also require Ester Oil for this conversion.

RETROFIT ADAPTERS
Standard

043141/0

Retrofit 1/4 - Straight

Special

043141/0 Retrofit 1/4" - 90 Retrofit 3/16"

AT41421 AT41422

AT41421

AT41422

Retrofit kit - TSP0695022 Contains all adapters necessary for Retrofit.

OTHERS

SERVICING TOOLS FOR AC SYSTEMS

2008

I 4
Back

CHARGING ADAPTER EXTENSION - AT41561

This extension allows AC charging on vehicles like: BMW 5 E60/E61 - Ford Galaxy 2006 - Ford S-Max - Volvo S3 - Mercedes SLK R171

RENAULT LAGUNA SERVICE PORT ADAPTER - AT41517

Allows the connection of a tube with standard fittings to the AC system service valves of pre-2001 Renault Lagunas.

EXTENSION COUPLING KITS

Suitable for reaching service valves, that in some engine compartment are accessible with difficulty.

AT41575 AT41576

90 1/4M quick coupling kit 180 1/4M quick coupling kit AT41575

AT41576

SERVICING MATERIALS 0701407R 070054R

Anti-condensation (9,25 m) Sealant (10x2 - Length = 6 m)

039001D Assortment of general fixtures, washers,

cable ties, screws

OTHERS

SERVICING TOOLS FOR AC SYSTEMS

2008

L1
Back

AT41066 - AIR OPERATED HACKSAW

041067/0 041068/0 Set 5 blades for laminates Set 5 blades for synthetic materials

AT41147 - PORTABLE CHARGING STATION FOR R134a/R22/R407/R507

041146.16 041147.6 041147.7 041147.10 041147.12 041406.19 041501.5 041501.6 041501.7 041501.8 Plexiglass cylinder + scale Vacuometer LP quick coupling Resistor Cylinder safety valve Vacuum pump HP pressure gauge LP pressure gauge LP blue hose 2000 mm HP red hose 2000 mm

AT41353 - FITTINGS FOR DYE INJECTION

041354.1 12 single dose additive capsules

AT41379 - REPAIRING TOOL FOR PRE-FORMED AIR CONDITIONING METAL PIPES

SPARE PARTS FOR SERVICING TOOLS

041379.3 041379.5 041379.6 041379.7 041379.8 041379.9 600STD8 600STD9 600STD10 600STD12 600STD13 600STD16 600ALD8 600ALD9 600ALD10 600ALD12 600ALD13 600ALD15 600ALD16 600ALD18 600ALD19 600STC9 600STC10 600STC12 600STC13 600STC16 600STVA9 600STVP9 600STVA10 600STVP10 600STVA12 600STVA13 600STVA16 600ALVA9 600ALVA10 600ALVA12 600ALVA13 600ALVA16 600STR10.9 600STR12.10 600STR13.9 600STR13.10 600STR13.12 600STR16.12 600STR16.13 600ALR12.10 600ALR13.9 600ALR13.10 600ALR16.13 600AL9 600AL13 600AL16 600AL19

Lokprep sealant Pair of gripping jaws 8 mm Pair of gripping jaws 9,5 - 10 mm Pair of gripping jaws 12 - 13 mm Pair of gripping jaws 14,5 - 16 mm Pair of gripping jaws 18 - 19 mm Straight Lokring joint - Brass 8 Straight Lokring joint - Brass 9,53 Straight Lokring joint - Brass 10 Straight Lokring joint - Brass 12 Straight Lokring joint - Brass 13 Straight Lokring joint - Brass 16 Straight Lokring joint - Aluminium 8 Straight Lokring joint - Aluminium 9,53 Straight Lokring joint - Aluminium 10 Straight Lokring joint - Aluminium 12 Straight Lokring joint - Aluminium 13 Straight Lokring joint - Aluminium 15 Straight Lokring joint - Aluminium 16 Straight Lokring joint - Aluminium 18 Straight Lokring joint - Aluminium 19 90 Lokring joint - Brass 9,53 90 Lokring joint - Brass 10 90 Lokring joint - Brass 12 90 Lokring joint - Brass 13 90 Lokring joint - Brass 16 Lokring joint with R134a valve - Brass 9,53 Lokring joint with R134a valve - Brass 9,53 Lokring joint with R134a valve - Brass 10 Lokring joint with R134a valve - Brass 10 Lokring joint with R134a valve - Brass 12 Lokring joint with R134a valve - Brass 13 Lokring joint with R134a valve - Brass 16 Lokring joint with R134a valve - Aluminium 9,53 Lokring joint with R134a valve - Aluminium 10 Lokring joint with R134a valve - Aluminium 12 Lokring joint with R134a valve - Aluminium 13 Lokring joint with R134a valve - Aluminium 16 Reduction - Brass 10-9,53 Reduction - Brass 12-10 Reduction - Brass 12,7-9,53 Reduction - Brass 12,7-10 Reduction - Brass 12,7-12 Reduction - Brass 15,8/16-12 Reduction - Brass 15,8/16-12,7 Reduction - Aluminium 12-10 Reduction - Aluminium 12,7-9,53 Reduction - Aluminium 12,7-10 Reduction - Aluminium 15,8/16-12,7 Lokring joint with sleeve - Aluminium 9,53 Lokring joint with sleeve - Aluminium 13 Lokring joint with sleeve - Aluminium 16 Lokring joint with sleeve - Aluminium 19

SERVICING TOOLS FOR AC SYSTEMS

2008

L2
Back

AT41397 - CRIMPER
041396.1 041396.2 041397.1 041397.2 041397.3 041397.4 041397.5 041397.6 041397.7 041397.8 041397.10 041397.12 041397.13 041519.1 041519.2 041519.3 041519.4 Threaded adapter Fixing key 5/16 -06 jaw couple -yellow 13/32 - 08 jaw couple - red 1/2 - 10 jaw couple - green 3/4 - 12 jaw couple - blue 5/16 - 06 rubber for jaws - yellow 13/32 - 08 rubber for jaws - red 1/2 -10 rubber for jaws 3/4 - 12 rubber for jaws Special oil Bracket cover Guide bracket kit 5/16 - 06 rid. jaw couple - white 1/2 - 10 rid. jaw couple - black 5/16 - 06 rid. rubber for jaws - white 1/2 - 10 rid. rubber for jaws - black

AT41415/1 - AC FLUSHING KIT

041415/1.1 041415/1.2 041415/1.3 041415/1.4 041415/1.5 041415/1.6 041415/1.7 041415/1.8 Aluminium bottle Flushing control Yellow connection hose Joint for small hose Joint for medium hose Joint for large hose Hose for recovered flushing liquid Recovery liquid hose with fittings

SPARE PARTS FOR SERVICING TOOLS

AT41440 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - ALFA ROMEO, FIAT and LANCIA
AT41441 AT41442 AT41443 AT41444 AT41445 AT41446 AT41447 AT41448 AT41449 AT41450 AT41451 AT41452 180 G06 adapter + flange 180 G08 adapter + flange 180 G10 adapter + flange 180 G06 adapter + flange 90 G06 adapter 90 G08 adapter 90 G10 adapter 90 G06 receiver drier adapter 90 G06 evaporator adapter 90 G10 evaporator adapter Evaporator flange Screws TBEI 6x25

AT41470 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - AUDI

AT41457 AT41458 AT41486 AT41487 AT41488 AT41489 AT41490 AT41491 AT41492 AT41493 AT41494 180 adapter + flange 90 G08 adapter + flange 90 G10 compressor adapter 90 G10 receiver drier/compressor adapter 180 G10 receiver drier/compressor adapter 90 G08 compressor adapter 90 G08 compressor/condenser adapter 180 G08 compressor/condenser adapter 180 G08 condenser/evaporator adapter 90 G10 receiver drier/compressor adapter 180 G10 evaporator/receiver drier adapter

SERVICING TOOLS FOR AC SYSTEMS

2008

L3
Back

AT41480 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - VOLKSWAGEN

AT41453 AT41454 AT41455 AT41456 AT41457 AT41458 AT41459 AT41467 AT41468 AT41469 AT41471 AT41472 AT41473 AT41474 AT41475 AT41476 AT41477 AT41478 AT41479 AT41481 AT41482 180 G10 adapter + flange 90 G10 adapter 90 G10 adapter 90 G08 adapter 180 adapter + flange 90 G08 adapter + flange 180 G06 expansion valve adapter 180 G10 expansion valve adapter 90 G10 adapter Expansion valve flange 3/8 receiver drier adapter 180 adapter + flange 180 adapter + flange 90 G06 expansion valve adapter 90 G06 adapter 180 G06 adapter 90 adapter 90 adapter 180 G10 compressor adapter 180 G08 compressor adapter Compressor flange

SPARE PARTS FOR SERVICING TOOLS

AT41497 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - ALHAMBRA, GALAXY E SHARAN

AT41459 AT41467 AT41469 AT41474 AT41479 AT41481 AT41482 AT41495 AT41496 AT41498 AT41499 AT41503 AT41504 AT41505 AT41506 AT41507 AT41508 AT41509 AT41510 180 G06 expansion valve adapter 180 G10 expansion valve adapter Expansion valve flange 90 G06 expansion valve adapter 180 G10 Compressor adapter 180 G08 compressor adapter Compressor flange 90 G10 compressor adapter 90 G08 compressor adapter G06 F Spring-Lock adapter G08 F Spring-Lock adapter G08 M Spring-Lock adapter G10 M Spring-Lock adapter G10 F Spring-Lock adapter 90 G08 condenser adapter 90 G06 VW condenser adapter VW Receiver drier flange Clamps G06 M Spring-Lock adapter

SERVICING TOOLS FOR AC SYSTEMS

2008

L4
Back

AT41500 - REFMATIC TOP

041197/0 041406.13 041406.27 041408UK.3 041430.11 041500.1 041500.2 041500.4 041500.5 041500.8 041500.10 041500.11 041500.14 041500.15 041500.19 041500.21 041500.22 041500.27 041501.1 041501.5 041501.6 041501.20 041501.21 041501.24 041501.25 041501.26 041501.31 041501.32 041501.39 041501.40 041501.43 041501.44 041501.45 041501.46 041501.49 041501.50 041501.51 041501.53 041501.54 041501.55 041501.56 Oil for vacuum pump Scale assembly 60 kg Hose car 900 90+straight check valve Valve coil Inlet filter Main circuit board Switch Scale assembly 15 kg Vacuum pump Expansion valve Condenser Hose 300 90+straight 1/4 Pressur sensor -1/10 bar Check valve kit Heating belt kit for 20 kg tank HP red hose - 2,5 m LP blue hose - 2,5 m 58 mm paper rolls pack for printer (4 pcs) Filter HP pressure gauge (male) LP pressure gauge (male) Whell with brake Big wheel HP quick coupling LP quick coupling R134a Tank fittings kit Bottle storage for oil draining Plastic cover 4,5 mm valve piston 2,5/3 mm valve piston LP pressure gauge (female) HP pressure gauge (female) Non-condensibles purging valve 16,8 bar Safety valve 20 bar Hose 600 90+straight 1/4 with valve Red plate kit - Small lever (10 pcs) Blue plate kit - Small lever (10 pcs) Small lever kit for faucet (10 pcs) Large lever kit for faucet (10 pcs) Red plate kit - Large lever (10 pcs) Blue plate kit - Large lever (10 pcs)

SPARE PARTS FOR SERVICING TOOLS

AT41500A - REFMATIC ACTIVE

041197/0 041406.1 041406.9 041406.13 041406.25 041430.1 041430.11 041500.4 041500.8 041500.11 041500.15 041500.25 041500.27 041500.28 041500.30 041500.31 041500.32 041500.33 041500.34 041500.35 041500.36 041500.37 041500P/08 041501.4 041501.5 041501.6 041501.21 041501.24 041501.25 041501.26 041501.27 041501.39 041501.40 041501.45 041501.46 041501.50 041501.51 041501.53 Oil for vacuum pump Compressor Refrigerant tank 12,4 l 20 bar Scale assembly 60 kg Solenoid valve Gasket for 1/4 hose (50 pcs) Inlet filter Scale assembly 15 kg Expansion valve Tubo 300 90+d 1/4 Check valve kit Main circuit board 58 mm paper rolls pack for printer (4 pcs) PC type change switch 2.5 m feeding cable LP blue hose 3 m HP red hose 3 m Hose 500 straight+straight with valve and check valve Front panel Upper panel Oil bottle (2 pcs.) Bottle storage for draining oil Memory card Pressure gauge (0/25 bar + psi D50 1/4SAE) HP pressure gauge (male) LA pressure gauge (male) Wheel HP quick coupling LP quick coupling Fitting kit for refrigerant tank Hose 500 straight+straight 1/4 with valve 4,5 mm valve piston 2,5/3 mm valve piston Non-condensibles purging valve 16,8 bar Safety valve 20 bar Red plate kit - Small lever (10 pcs) Blue plate kit - Small lever (10 pcs) Small lever kit for faucet (10 pcs)

SERVICING TOOLS FOR AC SYSTEMS

2008

L5
Back

AT41500E - REFMATIC EVO

041197/0 041406.9 041406.13 041406.19 041406.21 041406.27 041408UK.3 041430.11 041500.1 041500.2 041500.4 041500.8 041500.10 041500.11 041500.15 041500.20 041500.21 041500.22 041500.27 041501.1 041501.5 041501.6 041501.20 041501.21 041501.24 041501.25 041501.26 041501.31 041501.32 041501.35 041501.39 041501.40 041501.43 041501.44 041501.49 041501.50 041501.51 041501.53 041501.54 041501.55 041501.56 Oil for vacuum pump Refrigerant tank. 10 kg/12,7 l Scale assembly 60 kg Vacuum pump Safety valve 16 bar Hose 900 90+straight with check valve Valve coil Inlet filter Main circuit board Switch Scale assembly 15 kg Expansion valve Condenser Hose 300 90+straight 1/4 Check valve kit Heating belt kit for 10 kg tank HP red hose - 2500 mm LP blue hose - 2500 mm 58 mm paper rolls pack for printer (4 pcs) Filter HP pressure gauge (male) LP pressure gauge (male) Wheel with brake Big wheel HP quick coupling LP quick coupling Tank fittings kit Bottle for oil draining Plastic cover Non-condensibles purging valve 4,5 mm valve piston 2,5/3 mm valve piston LP pressure gauge (female) HP pressure gauge (female) Hose 600 90+straight 1/4 with valve Red plate kit - Small lever (10 pcs) Blue plate kit - Small lever (10 pcs) Small lever kit for faucet (10 pcs) Large lever kit for faucet (10 pcs) Red plate kit - Large lever (10 pcs) Blue plate kit - Large lever (10 pcs)

SPARE PARTS FOR SERVICING TOOLS

AT41500P - REFMATIC POWER

041197/0 041406.13 041406.25 041430.1 041430.11 041500.4 041500.8 041500.11 041500.15 041500.19 041500.25 041500.27 041500.28 041500.30 041500.31 041500.32 041500.33 041500.34 041500.35 041500.36 041500.37 041500P/08 041501.4 041501.5 041501.6 041501.21 041501.24 041501.25 041501.26 041501.27 041501.39 041501.40 041501.45 041501.46 041501.50 041501.51 041501.53 Oil for vacuum pump Scale assembly 60 kg Solenoid valve Gasket for 1/4 hose (50 pcs) Inlet filter Scale assembly 15 kg Expansion valve Hose 300 90+straight 1/4 Check valve kit Heating belt kit for 20 kg refrigerant tank Main circuit board 58 mm paper rolls pack for printer (4 pcs) PC type change switch 2.5 m feeding cable LP blue hose 3 m HP red hose 3 m Hose 500 straight+straight with valve and check valve Front panel Upper panel Oil bottle (2 pcs) Bottle storage for draining oil Memory card Pressure gauge (0/25 bar + psi D50 1/4SAE) HP pressure gauge (male) LP pressure gauge (male) Wheel HP quick coupling LP quick coupling Fitting kit for refrigerant tank Hose 500 straight+straight 1/4 with valve 4,5 mm valve piston 2,5/3 mm valve piston Non-condensibles purging valve 16,8 bar Safety valve 20 bar Red plate kit - Small lever (10 pcs) Blue plate kit - Small lever (10 pcs) Blue plate kit - Large lever (10 pcs)

SERVICING TOOLS FOR AC SYSTEMS

2008

L6
Back

AT41502 - REFMATIC PLUS

041197/0 041406.9 041406.13 041406.19 041406.21 041408UK.3 041408UK.5 041501.57 041430.18 041500.2 041500.11 041501.1 041501.2 041501.43 041501.6 041501.44 041501.5 041501.7 041501.8 041501.9 041501.12 041501.14 041501.20 041501.21 041501.24 041501.25 041501.26 041501.27 041501.29 041501.30 041501.31 041501.32 041501.35 041501.37 041501.39 041501.40 041501.41 041501.42 041501.48 041501.49 041501.50 041501.51 041501.52 041501.53 041501.54 041501.55 041501.56 041502.2 041502.3 Oil for vacuum pump Refrigerant tank 10 kg / 12,7 l Scale assembly 60 kg Vacuum pump Safety valve Valve coil Main circuit board (until a S/N A2 240090) Main circuit board (from S/N A1 154001 and A2 155163) Check valve 2F 1/4"SAE Switch Hose 300 90+straight 1/4 Filter Recovery system assembly LP pressure gauge (until S/N A1 240090 and A2 25531) LP pressure gauge (from S/N A1154001 and A2 23124) HP pressure gauge (until S/N A1 240090 and A2 25531) HP pressure gauge (from S/N A1154001 and A2 23124) LP blue hose 2 m HP red hose 2 m Manifold gauge hose 2 m Manifold gauges assembly (until S/N A1 240090 and A2 25531) Check valve M/F 1/8NBR Wheel with brake Big wheel HP quick coupling LP quick coupling Tank fittings kit Hose 500 straight+straight 1/4 with valve Ball faucet 6300 1/8 red Ball faucer 6450 1/8 yellow Bottle for draining oil Plastic cover Non-condensibles purging valve Oil injection system 4,5 mm valve piston 2,5/3 mm valve piston Hose 600 90+straight with check valve Polycarbonate panel board (until S/N A2 240090) Polycarbonate panel board (from S/N A1154001 and A2 23124) Hose 600 90+straight 1/4 with valve Red plate kit - Small lever (10 pcs) Blue plate kit - Small lever (10 pcs) Yellow plate kit - Small lever (10 pcs) Small lever kit for faucet (10 pcs) Large lever kit for faucet (10 pcs) Red plate kit - Large lever (10 pcs) Blue plate kit - Large lever (10 pcs) Solenoid valves assembly Vacuum pump protection switch

SPARE PARTS FOR SERVICING TOOLS

AT41522 - REFMATIC FRIGO

041522.1 041522.2 041522.3 041522.4 041522.5 041522.6 041522.7 Pressure gauge R404 suction unit Pressure switch 25/31 bar Solenoid valves assembly R404 Safety valve 31 bar Progressive breather valve 25 bar Tank R404 12,5 L 31 Bbar

AT41532 - AIR SANITIZER

041532.1 Chip

AT41543 - REFRIGERANT GAS ANALYSER

041543.1 041543.2 041543.3 041543.4 041543.5 041543.6 Filter Hose for R134a Hose for R12 Cable for 12V supply Adapter for 220V Adapter for 220V UK

SERVICING TOOLS FOR AC SYSTEMS

2008

L7
Back

AT41544 - PORTABLE REFRIGERANT RECOVERY UNIT

041544.1 041544.3 Filter Hoses Kit

AT41549 - UV LAMP WITH SUPPLY CABLE AND GOGGLES

041532.1 041532.2 Lamp Lens

AT41550 - COMPLETE KIT UV LAMP + FITTING FOR DYE INJECTION

041537.1 041537.2 041537.3 041537.4 041537.5 R134a adapter Hose R12 adapter Purge valve Dye bottle (64 doses)

AT41551 - MANUAL INJECTION SYSTEM FOR DYES (GUN + DYE BOTTLE)

041537.1 041537.2 041537.3 041537.4 041537.5 R134a adapter Hose R12 adapter Purge valve Dye bottle (64 doses)

SPARE PARTS FOR SERVICING TOOLS

AT41560 - DIAVIA CLEANER

041550/0 041551/0 041552/0 HDF296 Universal cone Hoses set 4 m Hoses set 1,80 m Filter

AT41568 - DIAVIA CLEANER PLUS

041550/0 041551/0 HDF296 Universal cone Hoses set 4 m Filter

AT41569 - COMPRESSOR GUARD KIT

041569.1 041569.2 041569.3 041569.4 041569.5 041569.6 041569.7 041569.8 041569.9 041569.10 041569.11 041569.12 041569.13 041569.14 041569.15 041569.16 041569.17 041569.18 041569.19 041569.20 Compressor guard 10,03mm Compressor guard 10,26mm Compressor guard 11,07mm Compressor guard 11,76mm Compressor guard 11,96mm Compressor guard 12,50mm Compressor guard 12,70mm Compressor guard 12,95mm Compressor guard 13,23mm Compressor guard 13,49mm Compressor guard 13,67mm Compressor guard 14,02mm Compressor guard 14,25mm Compressor guard 14,70mm Compressor guard 14,93mm Compressor guard 15,11mm Compressor guard 15,24mm Compressor guard 15,70mm Compressor guard 16,48mm Compressor guard 20,85mm

AT41570 - ELECTRONIC LEAK DETECTOR

041533.1 Sensor

AT41573 - PRINTER
041500.27 58 mm paper rolls pack for printer (4 pcs)

SERVICING TOOLS FOR AC SYSTEMS

2008

L8
Back

TSP0695001 - O-RING KIT ALFA ROMEO

0695106/0 0695113/0 0695117/0 0695120/0 0695125/0 0695131/0 0695138/0 0695103/0 0695105/0 0695111/0 0695146/0 0695147/0 0695149/0 0695155/0 0695172/0 0695165/0 0695168/0 0695169/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring valve cap cap cap

TSP0695002 - O-RING KIT AUDI - VOLKSWAGEN

0695106/0 0695107/0 0695108/0 0695117/0 0695125/0 0695127/0 0695131/0 0695134/0 0695135/0 0695138/0 0695139/0 0695141/0 0695152/0 0695155/0 0695165/0 0695166/0 0695167/0 0695170/0 0695171/0 0695172/0 0695173/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap cap cap valve valve

SPARE PARTS FOR SERVICING TOOLS

TSP0695003 - O-RING KIT BMW

0695117/0 0695120/0 0695125/0 0695130/0 0695131/0 0695138/0 0695144/0 0695145/0 0695147/0 0695152/0 0695161/0 0695165/0 0695168/0 0695169/0 0695172/0 0695186/0 0695188/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve O-ring O-ring

SERVICING TOOLS FOR AC SYSTEMS

2008

L9
Back

TSP0695004 - O-RING KIT CITROEN-PEUGEOT

0695106/0 0695108/0 0695117/0 0695125/0 0695131/0 0695138/0 0695155/0 0695165/0 0695168/0 0695169/0 0695172/0 0695185/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve valve

TSP0695005 - O-RING KIT FORD (1)

0695138/0 0695143/0 0695155/0 0695165/0 0695168/0 0695169/0 0695170/0 0695171/0 0695172/0 0695173/0 0695175/0 0695176/0 0695177/0 0695178/0 O-ring O-ring O-ring cap cap cap cap cap valve valve O-ring O-ring O-ring O-ring

SPARE PARTS FOR SERVICING TOOLS

TSP0695006 - O-RING KIT FORD (2)

0695103/0 0695106/0 0695107/0 0695110/0 0695111/0 0695113/0 0695115/0 0695117/0 0695120/0 0695122/0 0695123/0 0695125/0 0695131/0 0695133/0 0695138/0 0695144/0 0695162/0 0695163/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

TSP0695007 - O-RING KIT FIAT

0695101/0 0695103/0 0695106/0 0695107/0 0695117/0 0695120/0 0695123/0 0695125/0 0695131/0 0695138/0 0695147/0 0695148/0 0695149/0 0695150/0 0695165/0 0695166/0 0695167/0 0695172/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve

SERVICING TOOLS FOR AC SYSTEMS

2008

L 10
Back

TSP0695008 - O-RING KIT MERCEDES

0695104/0 0695108/0 0695116/0 0695117/0 0695125/0 0695128/0 0695131/0 0695138/0 0695139/0 0695149/0 0695156/0 0695157/0 0695165/0 0695168/0 0695169/0 0695172/0 0695186/0 0695187/0 0695189/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve O-ring O-ring O-ring

TSP0695009 - O-RING KIT OPEL (1)

0695106/0 0695109/0 0695112/0 0695114/0 0695115/0 0695117/0 0695120/0 0695125/0 0695131/0 0695138/0 0695144/0 0695145/0 0695146/0 0695153/0 0695154/0 0695158/0 0695159/0 0695164/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

SPARE PARTS FOR SERVICING TOOLS

TSP0695010 - O-RING KIT OPEL (2)

0695136/0 0695148/0 0695149/0 0695151/0 0695152/0 0695155/0 0695156/0 0695157/0 0695163/0 0695165/0 0695166/0 0695167/0 0695172/0 0695174/0 0695179/0 0695180/0 0695181/0 0695182/0 0695183/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve valve O-ring O-ring O-ring nipple nipple

SERVICING TOOLS FOR AC SYSTEMS

2008

L 11
Back

TSP0695011 - O-RING KIT RENAULT

0695101/0 0695106/0 0695113/0 0695117/0 0695120/0 0695125/0 0695131/0 0695138/0 0695147/0 0695148/0 0695149/0 0695160/0 0695161/0 0695165/0 0695166/0 0695167/0 0695172/0 0695184/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve valve

TSP0695012 - O-RING KIT ROVER

0695103/0 0695106/0 0695109/0 0695111/0 0695112/0 0695113/0 0695117/0 0695118/0 0695120/0 0695124/0 0695125/0 0695130/0 0695131/0 0695138/0 0695155/0 0695160/0 0695165/0 0695168/0 0695169/0 0695172/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve

SPARE PARTS FOR SERVICING TOOLS

TSP0695013 - O-RING KIT VOLVO/SAAB

0695102/0 0695106/0 0695108/0 0695119/0 0695121/0 0695126/0 0695129/0 0695132/0 0695137/0 0695140/0 0695142/0 0695144/0 0695151/0 0695153/0 0695155/0 0695165/0 0695168/0 0695169/0 0695172/0 0695185/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap cap valve valve

TSP0695015 - VALVE CORE KIT

0695172/0 0695173/0 0695185/0 0695204/0 0695205/0 0695206/0 valve valve valve valve valve valve

SERVICING TOOLS FOR AC SYSTEMS

2008

L 12
Back

TSP0695016 - O-RING KIT FOR COMPRESSORS

0695214/0 0695215/0 0695216/0 0695217/0 0695218/0 0695219/0 0695220/0 0695221/0 0695222/0 0695223/0 0695224/0 0695225/0 0695226/0 0695227/0 0695228/0 0695229/0 0695230/0 0695231/0 0695232/0 0695233/0 0695234/0 0695235/0 0695236/0 0695237/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

SPARE PARTS FOR SERVICING TOOLS

TSP0695017 - O-RING UNIVERSAL KIT

0695101/0 0695102/0 0695103/0 0695104/0 0695105/0 0695106/0 0695108/0 0695111/0 0695113/0 0695116/0 0695121/0 0695125/0 0695130/0 0695136/0 0695138/0 0695139/0 0695142/0 0695144/0 0695145/0 0695147/0 0695149/0 0695155/0 0695240/0 0695276/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

TSP0695018 - CAPS FOR SERVICE VALVES KIT

0695165/0 0695166/0 0695167/0 0695168/0 0695169/0 0695170/0 0695171/0 0695207/0 0695208/0 0695209/0 0695285/0 0695286/0 cap cap cap cap cap cap cap cap cap cap cap cap

SERVICING TOOLS FOR AC SYSTEMS

2008

L 13
Back

TSP0695019 - WASHER KIT FOR GM COMPRESSORS

0695179/0 0695180/0 0695181/0 0695182/0 0695183/0 0695201/0 0695202/0 0695203/0 0695277/0 0695278/0 0695279/0 0695280/0 O-ring O-ring O-ring nipple nipple O-ring O-ring O-ring O-ring O-ring O-ring O-ring

TSP0695020 - DOUBLE O-RING KIT

0695260/0 0695261/0 0695262/0 0695263/0 0695264/0 0695265/0 0695266/0 0695267/0 0695291/0 0695292/0 0695293/0 0695294/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

SPARE PARTS FOR SERVICING TOOLS

TSP0695022 - RETROFIT KIT

0695257/0 0695258/0 0695259/0 0695268/0 0695269/0 0695270/0 0695271/0 0695272/0 Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter

TSP0695023 - SERVICE KIT FOR FORD PIPES

0695104/0 0695116/0 0695125/0 0695138/0 0695175/0 0695176/0 0695177/0 0695178/0 0695281/0 0695282/0 0695283/0 0695284/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring springlock springlock springlock springlock

SERVICING TOOLS FOR AC SYSTEMS

2008

L 14
Back

TSP0695024 - COMPLETE SERVICE KIT

0695165/0 0695166/0 0695167/0 0695168/0 0695169/0 0695170/0 0695171/0 0695172/0 0695173/0 0695174/0 0695185/0 0695205/0 0695206/0 0695207/0 0695208/0 0695285/0 0695286/0 0695287/0 0695288/0 0695289/0 0695290/0 cap cap cap cap cap cap cap valve valve valve valve valve valve cap cap cap cap HP valve BP valve HP valve BP valve

TSP0695025 - O-RING KIT SUZUKI-MITSUBISHI

SPARE PARTS FOR SERVICING TOOLS

0695101/0 0695104/0 0695106/0 0695112/0 0695113/0 0695116/0 0695121/0 0695123/0 0695125/0 0695129/0 0695137/0 0695138/0 0695145/0 0695147/0 0695155/0 0695166/0 0695167/0 0695172/0 0695173/0 0695177/0 0695253/0 0695285/0 0695286/0

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap valve valve O-ring O-ring cap cap

TSP0695026 - O-RING KIT HONDA-NISSAN

0695103/0 0695104/0 0695106/0 0695112/0 0695113/0 0695116/0 0695121/0 0695125/0 0695128/0 0695137/0 0695138/0 0695145/0 0695147/0 0695148/0 0695150/0 0695160/0 0695166/0 0695167/0 0695172/0 0695173/0 0695276/0 0695285/0 0695286/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap valve valve O-ring cap cap

SERVICING TOOLS FOR AC SYSTEMS

2008

L 15
Back

TSP0695027 - O-RING KIT SUBARU-TOYOTA

0695101/0 0695104/0 0695105/0 0695106/0 0695112/0 0695113/0 0695116/0 0695124/0 0695125/0 0695127/0 0695129/0 0695137/0 0695138/0 0695145/0 0695147/0 0695155/0 0695166/0 0695167/0 0695172/0 0695173/0 0695185/0 0695274/0 0695276/0 0695285/0 0695286/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring cap cap valve valve valve O-ring O-ring cap cap

SPARE PARTS FOR SERVICING TOOLS

TSP0695028 - O-RING KIT HYUNDAI

0695104/0 0695106/0 0695107/0 0695116/0 0695117/0 0695123/0 0695125/0 0695133/0 0695137/0 0695138/0 0695147/0 0695148/0 0695155/0 0695172/0 0695177/0 0695178/0 0695273/0 0695275/0 0695285/0 0695286/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring valve O-ring O-ring O-ring O-ring cap cap

TSP0695030 - O-RING UNIVERSAL KIT

0695223/0 0695230/0 0695231/0 0695233/0 0695238/0 0695239/0 0695240/0 0695241/0 0695242/0 0695243/0 0695244/0 0695245/0 0695246/0 0695247/0 0695248/0 0695249/0 0695250/0 0695251/0 0695252/0 0695253/0 0695254/0 0695255/0 O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

DELPHI Product & Service Solutions Via Nobili, 2 - 40062 Molinella (BO) - Italy Tel. +39 051 6906111 - Fax +39 051 6906314 www.delphidiavia.it