SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Trade name or CONDACLEAN ALLMET
designation of the mixture
Registration number -
Synonyms None.
Product code C07953
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Cleaning agent
Uses advised against Not available.
1.3. Details of the supplier of the safety data sheet
Supplier
Company name CONDAT
Address 104 Avenue Frédéric Mistral - B.P. 16
38670 CHASSE SUR RHONE
FR
Division Products Regulatory Affairs Department
Telephone Tel.: 33 (0)4 78.07.38.38
Fax: 33 (0)4 78.07.38.00
e-mail arp@condat.fr
Contact person Products Regulatory Affairs Department
1.4. Emergency telephone Emergency telephone number:
number
24H/24H [China] : 86 4001 2001 74
24H/24H [Australia] : + 61 1 800 686 951
24H/24H [Asia-Pacific] : 1-760-476-3960
24H/24H [Europe] : 1-760-476-3961
24H/24H 1-866-519-4752
[USA-Canada-Mexico] :
24H/24H [Americas] : 1-760-476-3962
24H/24H [Middle East&Africa] 1-760-476-3959
:
Emergency phone (Access 333637
code):

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture
The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification
applies.
Classification according to Regulation (EC) No 1272/2008 as amended
Physical hazards
Corrosive to metals Category 1 H290 - May be corrosive to metals.
Health hazards
Acute toxicity, oral Category 4 H302 - Harmful if swallowed.
Skin corrosion/irritation Category 1 H314 - Causes severe skin burns
and eye damage.
Serious eye damage/eye irritation Category 1 H318 - Causes serious eye damage.

SDS UK 1 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

2.2. Label elements

Label according to Regulation (EC) No. 1272/2008 as amended
Contains: Alcohols, C9-11, ethoxylated, Phosphoric acid 20 - 30%
Hazard pictograms

Signal word Danger

Hazard statements
H290 May be corrosive to metals.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
Precautionary statements
Prevention
P260 Do not breathe vapour.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P310 Immediately call a POISON CENTRE/doctor.
Storage Store away from incompatible materials.
Disposal Not available.
Supplemental label None.
information
2.3. Other hazards This mixture does not meet vPvB / PBT criteria of Regulation (EC) No 1907/2006, Annex XIII.

SECTION 3: Composition/information on ingredients

3.2. Mixtures
General information
Chemical name % CAS-No. / EC REACH Registration No. Index No. Notes
No.
Phosphoric acid 20 - < 30 7664-38-2 - 015-011-00-6 #
231-633-2
Classification: Met. Corr. 1;H290, Acute Tox. 4;H302, Skin Corr. 1B;H314, Eye Dam. 1;H318 B
Alcohols, C9-11, ethoxylated 10 - < 20 68439-46-3 - -
-
Classification: Acute Tox. 4;H302, Eye Dam. 1;H318

SDS UK 2 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

List of abbreviations and symbols that may be used above

CLP: Regulation No. 1272/2008. "-" = Not available or this substance does not meet the criteria for classification according to
Regulation (EC) 1272/2008 as amended.
#: This substance has been assigned Union workplace exposure limit(s).
M: M-factor
PBT: persistent, bioaccumulative and toxic substance.
vPvB: very persistent and very bioaccumulative substance.
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
Composition comments Occupational Exposure Limits for constituents are listed in Section 8. The full text for all
H-statements is displayed in section 16.

SECTION 4: First aid measures

General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Show this safety data sheet to the doctor in attendance.
4.1. Description of first aid measures
Inhalation Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or
poison control centre immediately. Chemical burns must be treated by a physician. Wash
contaminated clothing before reuse.
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Call a physician or poison control centre immediately.
Ingestion Call a physician or poison control centre immediately. Rinse mouth. Do not induce vomiting.
4.2. Most important Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
symptoms and effects, both include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
acute and delayed blindness could result.
4.3. Indication of any Provide general supportive measures and treat symptomatically. Chemical burns: Flush with water
immediate medical attention immediately. While flushing, remove clothes which do not adhere to affected area. Call an
and special treatment ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under
needed observation. Symptoms may be delayed.

SECTION 5: Firefighting measures

General fire hazards None known.
5.1. Extinguishing media
Suitable extinguishing Not applicable, non-combustible. Use extinguishing measures that are appropriate to local
media circumstances and the surrounding environment.
Unsuitable extinguishing Not applicable, non-combustible.
media
5.2. Special hazards arising None known. See also section 10.
from the substance or
mixture
5.3. Advice for firefighters
Special protective None (non-combustible).
equipment for
firefighters
Special fire fighting In case of fire and/or explosion do not breathe fumes.
procedures
Specific methods In the event of fire and/or explosion do not breathe fumes.

SDS UK 3 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
For non-emergency Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
personnel appropriate protective equipment and clothing during clean-up. Do not breathe mist/vapours. Do
not touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
For emergency Keep unnecessary personnel away. Use personal protection recommended in Section 8 of the SDS.
responders
6.2. Environmental Local authorities should be advised if significant spillages cannot be contained. Prevent further
precautions leakage or spillage if safe to do so. Do not contaminate water. Avoid discharge into drains, water
courses or onto the ground.
6.3. Methods and material for This product is miscible in water. Should not be released into the environment. Prevent entry into
containment and cleaning up waterways, sewer, basements or confined areas.

Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb spillage to prevent material damage. Use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Following product recovery, flush area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.

Never return spills to original containers for re-use.

6.4. Reference to other For personal protection, see section 8 of the SDS. For waste disposal, see section 13 of the SDS.
sections

SECTION 7: Handling and storage

7.1. Precautions for safe Do not breathe mist/vapours. Do not get in eyes, on skin, or on clothing. Do not taste or swallow.
handling Avoid prolonged exposure. When using, do not eat, drink or smoke. Wear appropriate personal
protective equipment. Wash hands thoroughly after handling. Observe good industrial hygiene
practices. Wash hands after handling. Handle in accordance with good industrial hygiene and safety
practices. Adequate ventilation should be provided so that exposure limits are not exceeded.
7.2. Conditions for safe Store locked up. Store in a cool, dry place out of direct sunlight. Store in corrosive resistant
storage, including any container with a resistant inner liner. Keep only in the original container. Store in closed original
incompatibilities container in a dry place. Store away from incompatible materials (see Section 10 of the SDS).
7.3. Specific end use(s) Not available.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters
Occupational exposure limits
UK. EH40 Workplace Exposure Limits (WELs)
Components Type Value
Phosphoric acid (CAS STEL 2 mg/m3
7664-38-2)
TWA 1 mg/m3

SDS UK 4 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

EU. Indicative Exposure Limit Values in Directives 91/322/EEC, 2000/39/EC, 2006/15/EC, 2009/161/EU,
2017/164/EU
Components Type Value
Phosphoric acid (CAS STEL 2 mg/m3
7664-38-2)
TWA 1 mg/m3
Biological limit values No biological exposure limits noted for the ingredient(s).
Recommended monitoring Follow standard monitoring procedures.
procedures
Derived no effect levels Not available.
(DNELs)
Predicted no effect Not available.
concentrations (PNECs)
8.2. Exposure controls
Appropriate engineering Good general ventilation should be used. Ventilation rates should be matched to conditions. If
controls applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Ensure adequate ventilation, especially
in confined areas. Eye wash facilities and emergency shower must be available when handling this
product.
Individual protection measures, such as personal protective equipment
General information Use personal protective equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the personal protective
equipment.
Eye/face protection Wear safety glasses with side shields (or goggles) and a face shield.
Skin protection
- Hand protection Use protective gloves made of: Nitrile. Polyvinyl chloride (PVC).
- Other Wear appropriate chemical resistant clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
Hygiene measures Keep away from food and drink. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
Environmental exposure Emissions from ventilation or work process equipment should be checked to ensure they comply
controls with the requirements of environmental protection legislation. Fume scrubbers, filters or
engineering modifications to the process equipment may be necessary to reduce emissions to
acceptable levels.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Appearance
Physical state Liquid.
Form Liquid.
Colour Colourless.
Odour Not available.
Odour threshold Not available.
pH <= 1

SDS UK 5 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

Melting point/freezing point Not available.

Initial boiling point and Not available.
boiling range
Flash point Not applicable.
Evaporation rate Not available.
Flammability (solid, gas) Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower Not available.
(%)
Flammability limit - Not available.
upper (%)
Vapour pressure Not available.
Vapour density Not available.
Relative density 1.147
Relative density temperature 20 °C (68 °F)
Solubility(ies)
Solubility (water) Soluble
Partition coefficient Not available.
(n-octanol/water)
Auto-ignition temperature Not available.
Decomposition temperature Not available.
Viscosity Not available.
Explosive properties Not available.
Oxidising properties Not oxidising.
9.2. Other information
Kinematic viscosity Not applicable
pH in aqueous solution <= 1 @5-12%

SECTION 10: Stability and reactivity

10.1. Reactivity Reacts violently with strong alkaline substances. This product may react with reducing agents. May
be corrosive to metals.
10.2. Chemical stability Material is stable under normal conditions.
10.3. Possibility of hazardous No dangerous reaction known under conditions of normal use.
reactions
10.4. Conditions to avoid Avoid temperatures exceeding the decomposition temperature. Contact with incompatible materials.
Do not mix with other chemicals.
10.5. Incompatible materials Bases. Strong oxidising agents. Reducing Agents. Metals.
10.6. Hazardous Phosphorus compounds.
decomposition products

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Acute toxicity Harmful if swallowed.

Skin corrosion/irritation Causes severe skin burns and eye damage. Under normal conditions of intended use: May produce
corrosive solutions on contact with water.

SDS UK 6 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

Serious eye damage/eye Causes serious eye damage. Under normal conditions of intended use: May produce corrosive
irritation solutions on contact with water.
Respiratory sensitisation Not classified.
Skin sensitisation Not classified.
Germ cell mutagenicity Not classified.
Carcinogenicity Not classified.
Reproductive toxicity Not classified.
Specific target organ toxicity Not classified.
- single exposure
Specific target organ toxicity Not classified.
- repeated exposure
Aspiration hazard Not classified.
Mixture versus substance No information available.
information
Other information Not available.

SECTION 12: Ecological information

12.1. Toxicity Because of the low pH of this product, it would be expected to produce significant ecotoxicity upon
exposure to aquatic organisms and aquatic systems. Based on available data, the classification
criteria are not met for hazardous to the aquatic environment.
12.2. Persistence and No data is available on the degradability of this product.
degradability
12.3. Bioaccumulative No data available.
potential
Partition coefficient Not available.
n-octanol/water (log Kow)
Bioconcentration factor (BCF) Not available.
12.4. Mobility in soil No data available.
Mobility in general This product is miscible in water.
12.5. Results of PBT and This mixture does not meet vPvB / PBT criteria of Regulation (EC) No 1907/2006, Annex XIII.
vPvB assessment
12.6. Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.

SECTION 13: Disposal considerations

13.1. Waste treatment methods
Residual waste Dispose of in accordance with local regulations. Empty containers or liners may retain some product
residues. This material and its container must be disposed of in a safe manner (see: Disposal
instructions).
Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal.
EU waste code Waste codes should be assigned by the user based on the application for which the product was
used.
Unused product : 16 03 05*
Disposal Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not discharge
methods/information into drains, water courses or onto the ground. Dispose of contents/container in accordance with
local/regional/national/international regulations.

SDS UK 7 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

Special precautions Dispose in accordance with all applicable regulations.

SECTION 14: Transport information

ADR
14.1. UN number UN1805
14.2. UN proper shipping PHOSPHORIC ACID, SOLUTION
name
14.3. Transport hazard class(es)
Class 8
Subsidiary risk -
Label(s) 8
Hazard No. (ADR) 80
Tunnel restriction E
code
14.4. Packing group III
14.5. Environmental No.
hazards
14.6. Special precautions Read safety instructions, SDS and emergency procedures before handling.
for user
IATA
14.1. UN number UN1805
14.2. UN proper shipping Phosphoric acid, solution (PHOSPHORIC ACID)
name
14.3. Transport hazard class(es)
Class 8
Subsidiary risk -
14.4. Packing group III
14.5. Environmental No.
hazards
ERG Code 8L
14.6. Special precautions Read safety instructions, SDS and emergency procedures before handling.
for user
Other information
Passenger and cargo Allowed with restrictions.
aircraft
Cargo aircraft only Allowed with restrictions.
IMDG
14.1. UN number UN1805
14.2. UN proper shipping PHOSPHORIC ACID SOLUTION (PHOSPHORIC ACID)
name
14.3. Transport hazard class(es)
Class 8
Subsidiary risk -
14.4. Packing group III
14.5. Environmental hazards
Marine pollutant No.
EmS F-A, S-B
14.6. Special precautions Read safety instructions, SDS and emergency procedures before handling.
for user
14.7. Transport in bulk Not applicable.
according to Annex II of
MARPOL 73/78 and the IBC
Code

SDS UK 8 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

ADR; IATA; IMDG

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU regulations
Regulation (EC) No. 1005/2009 on substances that deplete the ozone layer, Annex I and II, as amended
Not listed.
Regulation (EC) No. 850/2004 On persistent organic pollutants, Annex I as amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 1 as
amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 2 as
amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 3 as
amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex V as amended
Not listed.
Regulation (EC) No. 166/2006 Annex II Pollutant Release and Transfer Registry, as amended
Not listed.
Regulation (EC) No. 1907/2006, REACH Article 59(10) Candidate List as currently published by ECHA
Not listed.
Authorisations
Regulation (EC) No. 1907/2006, REACH Annex XIV Substances subject to authorization, as amended
Not listed.
Restrictions on use
Regulation (EC) No. 1907/2006, REACH Annex XVII Substances subject to restriction on marketing and use as
amended
Not listed.
Directive 2004/37/EC: on the protection of workers from the risks related to exposure to carcinogens and
mutagens at work, as amended.
Not listed.
Other EU regulations
Directive 2012/18/EU on major accident hazards involving dangerous substances, as amended
Not listed.

SDS UK 9 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48
 SAFETY DATA SHEET

Product : CONDACLEAN ALLMET

Code : C07953 Version : 3.0 Revision : 08-December-2021

Other regulations The product is classified and labelled in accordance with Regulation (EC) 1272/2008 (CLP
Regulation) as amended. This Safety Data Sheet complies with the requirements of Regulation (EC)
No 1907/2006, as amended.
National regulations Young people under 18 years old are not allowed to work with this product according to EU
Directive 94/33/EC on the protection of young people at work, as amended. Follow national
regulation for work with chemical agents in accordance with Directive 98/24/EC, as amended.
15.2. Chemical safety No Chemical Safety Assessment has been carried out.
assessment

SECTION 16: Other information

List of abbreviations
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland
Waterways.
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road.
CAS: Chemical Abstract Service.
CEN: European Committee for Standardization.
IATA: International Air Transport Association.
IBC: Intermediate Bulk Container.
IMDG: International Maritime Dangerous Goods.
MARPOL: International Convention for the Prevention of Pollution from Ships.
PBT: Persistent, bioaccumulative, toxic.
RID: Regulations concerning the International Carriage of Dangerous Goods by Rail.
STEL: Short term exposure limit.
TWA: Time Weighted Average.
vPvB: Very persistent and very bioaccumulative.
References Not available.
Information on evaluation The classification for health and environmental hazards is derived by a combination of calculation
method leading to the methods and test data, if available.
classification of mixture
Full text of any H-statements
not written out in full under
Sections 2 to 15 H290 May be corrosive to metals.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
Revision information None.
Training information Follow training instructions when handling this material.

CONDAT cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its
product, may be used. It is the user’s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability
for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience
currently available. This document complements the technical sheets but does not replace them. The information contained herein is based on our
knowledge of the concerned product on the date indicated. It is offered in good faith. Furthermore, the regulatory requirements referred to must not
be considered as exhaustive. They do not exempt in any form the user from knowing and applying all regulations related to the possession and use of
the product. The user takes as their sole responsibility the implementation of precautions relating to storage and their use of the product.
SDS UK 10 / 10
Quick-FDS [20098-49008-09278-014273] - 2023-01-09 - 13:36:48