The Display Specialists
2000 Bloomingdale Road Phone: (630) 893-1720
Units 245-250 FAX: (630) 893-9991
Glendale Heights, IL 60139 Web: www.omnivisionusa.com
Email: info@omnivisionusa.com
5”
Monochrome CRT
Open Frame, Box or Kit
Monitor
LP05… series product
See table below for model numbers
This Omni Vision monitor is offered in an open frame chassis or as a kit version product for applications
where a small display is required and the input signal can be composite video or TTL or analog video with
TTL sync. This low power CRT module is a great solution. The 5” CRT provides great viewing angles
and higher brightness levels. The main circuit board is made of industrial grade epoxy/fiber glass
reinforced material with an FR4 rating.
Detail Specification:
CRT size 5" Horizontal frequency 15 to 35 kHz +/- 500 Hz
Vertical frequency 50 or 60 Hz
Phosphor White P4 Video Response From 20 to 26 MHz
Viewing Area 15 sq in maximum Max Resolution 800x600 @ 60 Hz
Scanning Interlaced & non-interlaced Display Color Unlimited Gray Scale
Agency Approvals UL, cUL, TUV Agency Compliance FDA, CE, FCC
Dimensions See mechanical drawing Net Weight (lbs.) depends on product
(HxWxD) Low profile 94-005 version kit or chassis
Box 94-006
General Information:
On board service controls Brightness, Contrast, Focus, Horizontal (Size, Centering, Hold), Vertical
(Size, Centering, and Linearity)
Optional remote brightness and contrast interface available
Input signal type standard - Analog Video - 0 to 0.7 volts
Horizontal & Vertical Sync Signals - TTL level 0 to 5 volts
Signal Connectors - Standard card edge connector
Input Power - Standard +12 vdc @ 1.5 A (typical)
Input Power Connector - Standard card edge connection
Temperature - Operating from 0 to +55 degrees C
Storage from -20 to +65 degrees C
Model numbering - LP05xxyzz-?
Options
xx Is for frequency Horizontal (kHz) Typically 15, 18, 21, 31, or 35
y Chassis Composite video Equals "G" for NTSC or PAL or unique
TTL Equals "E" for std TTL or analog video w/TTL sync
zz OVI assigned Alpha numeric 1-9, A-Z, or combination of alpha number
? Phosphor P4 for white, P31 for green, or LA for amber
1 of 3
The Display Specialists
2000 Bloomingdale Road Phone: (630) 893-1720
Units 245-250 FAX: (630) 893-9991
Glendale Heights, IL 60139 Web: www.omnivisionusa.com
Email: info@omnivisionusa.com
Features -
All circuitry is on a single, double sided, plated through PCB.
All controls are easily accessible from the top of monitor.
The video display is stabilized through the use of a voltage controlled, temperature compensated
feedback to synchronized free run oscillator.
Electronic horizontal video centering.
Geometric distortion - within 2 % EIS Standard Dot/Ball Chart or variation between adjacent
characters not more than 10 % in alpha numeric display applications
High Voltage - Over 8 kV at 50 microamperes of beam current with no more than 0.5 kV variation
from zero beam to 100 microamperes beam current.
Additional detail specifications -
TTL signals
Signal Positive polarity + 2.5 v to 5.0 v
Video Input Impedance 470 ohms
Bandwidth Within 3 db from 10 Hz to 26 kHz
Vertical Input Impedance Greater than 1k Ohms
Typical Signal 180 micro seconds
Horizontal Input Impedance Greater than 6k Ohms
Typical Signal 2.5 to 8 micro seconds
Composite video
Signal Positive video - negative sync 0.7 v to 1.8 v peak to peak composite
Input Impedance 75 Ohms
Bandwidth Within 3 db from 10 Hz to 26 kHz
Drawing 94-005
2 of 3
The Display Specialists
2000 Bloomingdale Road Phone: (630) 893-1720
Units 245-250 FAX: (630) 893-9991
Glendale Heights, IL 60139 Web: www.omnivisionusa.com
Email: info@omnivisionusa.com
Box chassis model -
Drawing 94-006
3 of 3
