Scribd
Upload
45 views4 pages

VGC Troubleshooting

The document provides troubleshooting instructions for the VGC and BSE modules in Draeger Medical equipment. It includes diagrams showing measuring points and test LEDs on various PCBs, as well as components related to the loudspeaker and power supply. Specific LEDs indicate operational statuses such as inspiration and voltage presence.

Uploaded by

Cabinet JOCH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views4 pages

VGC Troubleshooting

The document provides troubleshooting instructions for the VGC and BSE modules in Draeger Medical equipment. It includes diagrams showing measuring points and test LEDs on various PCBs, as well as components related to the loudspeaker and power supply. Specific LEDs indicate operational statuses such as inspiration and voltage presence.

Uploaded by

Cabinet JOCH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Draeger Medical Page 1 of 4

Apollo Repair instructions 1.0

1 VGC troubleshooting
1.1 BSE module troubleshooting.

1 VGC troubleshooting

The measuring points and the test LEDs on the individual PCBs are presented in the following.

Fig.1 Measuring points and test LEDs on ANALOG PCB (for component replacement see VGC).

encrypted-file:///C:/ProgramData/Draeger/ServiceConnect Documents/Doku/EN/5132.50... 12/19/2021


Draeger Medical Page 2 of 4

Fig.2 Measuring points and fuses on the VGC POWER PCB (for component replacement see VGC).

1.1 BSE module troubleshooting.

encrypted-file:///C:/ProgramData/Draeger/ServiceConnect Documents/Doku/EN/5132.50... 12/19/2021


Draeger Medical Page 3 of 4

Fig.3 BSE and loudspeaker (without headphone output socket)

Item Component
1 Loudspeaker.
2 BSE PCB.
3 LED A (lit during inspiration).
4 LED B (lit during communication).
5 LED 3V3 (lit when 3.3 V is present).
6 LED 5V (lit when 5 V is present).

encrypted-file:///C:/ProgramData/Draeger/ServiceConnect Documents/Doku/EN/5132.50... 12/19/2021


Draeger Medical Page 4 of 4

Fig.4 BSE and loudspeaker (with headphone output socket)

Item Component
1 Loudspeaker.
2 BSE PCB.
3 LED A (lit during inspiration).
4 LED B (lit during communication).
5 LED 3V3 (lit when 3.3 V is present).
6 LED 5V (lit when 5 V is present).
7 Jumper X13 (if no headphone output socket is
connected to the "Headphones" connector,
jumper X13 must be installed).
Copyright reserved© - For service personnel use only - Printed by Draeger Medical

encrypted-file:///C:/ProgramData/Draeger/ServiceConnect Documents/Doku/EN/5132.50... 12/19/2021

You might also like