US5GMeUS5GM
ENABLING NEXT GENERATION CARRIER NETWORK SYNCHRONIZATION ...
FEI, with a 40-year legacy in precision oscillator technologies and more than 15 years of experience designing and manufacturing SSUs for major international carriers, has created an SSU of unprecedented.
TOTAL SOFTWARE MANAGEMENT
For the first time NO dedicated hardware assemblies, jumpers, or switches are used to configure common telecom signal formats in the US5GMe - inbound or outbound.
Reliability Durability Survivability Adaptability Cost efficiency
REMOTE MANAGEMENT
All software management interfaces are remotely accessible via TCP/IP LAN allowing full utilization of Centralized Network Operations Center (CNOC) for monitoring and management.
System Software Control Features
Standard compliant TL-1 Command Line Interface Auto-provisioning of all modules during installation and initialization Upon insertion of a replacement module :
Automated Hardware and Software compatibility checks Automated Software download of current module software Auto-provisioning from current provisioning
database Inventory in software:
Input reference source Output port assignment
Inventory CLEI and Mfg Serial Number in software to help in field servicing and PCN administration
Mont Saint-Martin 58B-4000 LIEGEBELGIUM Tel.: +32 (0) 4 232 95 95Fax : +32 (0) 4 223 42 76 Email : info@gillam-fei.beinternet : www.gillam-fei.be
US5GMe PRODUCT SPECIFICATIONS US5GMe PRODUCT SPECIFICATIONS
Modular Redundancy in Hardware
Dual Power Inputs & Power Supplies Up to 5 References Inputs Inputs bridge to both IOP Modules Dual IOPs (ST-2 or ST-3E) Paired Output Modules for 1 to 1 Protection
Microprocessor Control & Memory Features
Top level IntelTM microprocessors on COM and System Databases stored on the COM module Output Module on-board microprocessors enable management to each output port are backed up on BOTH IOPs both IOP modules
Oscillator Options
Standard Quartz ST-3E & Rubidium ST-2 Optional Stratum 2 High Precision Double Oven Quartz Oscillator (DOCXO) - ST- 2 performance at lower cost
System Communications Interfaces
Local craft interfaces2 ( 1 front panel) TCP / IP Local Area Network interface via RJ-45
Integrated GPS Receiver
The US5GMe is designed to integrate GPS receiver. This arrangement optimizes rack bay utilization by eliminating separately mounted GPS unit. The GPS reference is independent of other input capacity meaning all other inputs are still available for selection or for monitor only operation.
Alarm Reporting Modes
Module Status and Alarm LEDs 6 Contact Closure RelaysLocal & Remote TL-1 Autonomous Output Messaging 16 Discrete Alarm Input Relays
Mont Saint-Martin 58B-4000 LIEGEBELGIUM Tel.: +32 (0) 4 232 95 95Fax : +32 (0) 4 223 42 76 Email : info@gillam-fei.beinternet : www.gillam-fei.be
US5GMe PRODUCT SPECIFICATIONS US5GMe PRODUCT SPECIFICATIONS
Architecture Main shelf module : 2 clocks with maximum 3 inputs each, GPS, 4 output cards (80 1+1 max output ports) Fast interface bus for inter-cards communication Local and remote management; software download for all active module (IOP modules, COM card, Output Cards) Safe Data Base management; duplication of Data base on COM card and on both clock modules Power supply modules Dual load sharing Each receives power from dedicated back panel power input Automatic redundancy in case of module failure Dual -35 to -72VDC Communication Module (COM card) System Communications Controller -BOTH external and internal processes Provides system TL-1 Agent Manages all system security processes Manages all DB storage, access & synchronisation with IOP back up Powerful CPU with real time kernel. 2 RS232: CRAFT 1,2 1 ETHERNET RJ45: 4x TELNET + 6x TCP/IP sessions EVENT LOG (1000) EVENT AO LOG (400) SECU LOG (100) DBCHG LOG (400) Performance measurement : buffering, log and alarm for Clock module PM data Clock modules (IOP modules) Based on Rubidium or quartz oscillator, possibility of mixed configuration Dual redundant clock modules Clock performance : ITU-T G.812 type 1 & 2 or ANSI T1.101 type ST2 or ST3E 5 Universal input modules : E1, 2048 kHz, 1-5-10 MHz, (option 1544 kHz, DS1, 64 kHz CC) Maximum 5 input modules per clock module (input impedance 75 and 120 Ohm) Each input can be used as reference or measurement input SSM: full compliant (ITU-T G.704, Telcordia GR-378), possibility of QL assignment for no SSM capable inputs Full software manageable: diagnostic alarms, automates for clock state administration Powerful CPU with real time kernel Performance Measurement : TIE, MRTIE, TDEV, FFOFF for several time intervals (1s to 10000s) GPS
Two plug-in GPS receivers Optionally, antenna converter allowing to use 300m of RG59 cable to connect the antenna
Output 40 or 20 outputs per module, paired for 1+1 protection E1 2MHz-2Mbit/s programmable or T1-CC programmable Main shelf: 80 outputs max (1+1 protected) Environmental Operating temperature: -5 to 50c Humidity: 5 to 95% Dimensions: H=270mm(10.5"); W=430mm(17"); D=280mm(11") NEBS level 3
Mont Saint-Martin 58B-4000 LIEGEBELGIUM Tel.: +32 (0) 4 232 95 95Fax : +32 (0) 4 223 42 76 Email : info@gillam-fei.beinternet : www.gillam-fei.be
