Command Line Management

All commands will tack effect only after reboot [Mode] Wireless Mode sys operation <0:AP|1:Client|2:Bridge|3: WDS niversal Repeater|7:Gateway> [Mode] wlan alias active chid essid rssid band mode clone encrypt wds peer disp add [mac] delete [id] clearall encrypt [off] wep [64|128] <ascii|hex> <key> wpa wpa2 stp isolation [on|off] [on|off] [tkip|aes] [mixed|aes] <pass|hex> <key> [gklt] <pass|hex> <key> [gklt] [string] [on|off] [channel_id|auto] [essid] [rssid] [b|g|bg] [client <infrastructure|adhoc>] [mac_addr|auto|manual] [both|wlan|wan] Basic Settings Repeater|4:Universal Repeater|5:WISP|6:WISP+U

wlan alias [Mode] wlan survey connect [id] (only support in Client, WISP, Universal Repeater Mode, WISP + Universal Repeater Mode ) [Mode] wlan auth security encrypt [off] wep [64|128] <ascii|hex> <1:key1|2:key2|3:key3|4 :key4> <key> wpa wpa2 [tkip|aes] [mixed|aes] <pass|hex> <key> [gklt] <pass|hex> <key> [gklt] [off|on <port> <ip_addr> <password> 1x [64|128]|wpa [tkip|aes]|wpa2 [mixed|aes]>] preauth account [Mode] wlan preamble bssid iapp protect11g fragment rts [long|short] [on|off] [on|off] [on|off] <256~2346> <0~2347> Advanced Settings wlan [on|off] [off|on <port> <ip_addr> <password>] <wep [open|share|auto] Security Site Survey [string]

beacon inactivity datarate txpower watchdog [Mode] wlan acl Access Control

<20~1024> <100~60480000> <0~12> <1~10> [off|on <host>] <interval:1~60>

disp off allow deny add [mac] delete [id] clearall [Mode] Wan Port wan clone dns static dhcp [mac_addr] [auto|manual] [ip_addr <gateway>] [on|release|renew] <username> [svname <service_name>] pppoe <auth_type> <mtu_value> dynpppoe <ip [server_url]> <password> pptp <mppe> [static <netmask> <gateway>|dynamic] l2tp <ip [server_ip]|url <timeout>|2] [server_ip]|url <username> <auth_type> <mtu_value> <ip_addr> <mppe> dynwan 0|1 [connect <password> 0|1 <netmask>

[server_url]> <password> <mppe> [static <netmask>

<username> <auth_type> <mtu_value> <ip_addr>

<gateway>|dynamic] <timeout> auth_type: 0. PAP 1. CHAP 2. MSCHAP 3. MSCHAP2 mppe: 0. none 1. 40bits 2. 56bits 3. 128bits link protocol sys server passthruvpn passthruvpn passthruvpn [Mode] ip nat server disp delete [id] clearall add <ser_ip> <server> <from_port [proto [to_port]>] server: 0. Customize 1. Web, 2. FTP, 3. POP3, 4. SMTP, 5. DNS, 6. Telnet proto: 1. TCP+UDP, 2. TCP, 3. UDP [Mode] ip nat Special Applications Virtual Servers [status|set <mode>] status access ipsec <0:disabled|1:enabled> pptp <0:disabled|1:enabled> l2tp <0:disabled|1:enabled> icmp <0:disabled|1:enabled>

service disp sap1 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] sap2 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] sap3 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] sap4 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] sap5 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] sap6 [on|off|clear|edit [on|off|clear|edit <in_proto> [on|off|clear|edit <in_proto> [on|off|clear|edit <in_proto> [on|off|clear|edit <in_proto> [on|off|clear|edit <in_proto>

<in_from_port>

<in_from_port>

<in_from_port>

<in_from_port>

<in_from_port>

<name> <in_to_port> <trig_proto>

<in_proto>

<in_from_port>

<trig_from_port> <trig_to_port>] sap7 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] sap8 <name> <in_to_port> <trig_proto> <trig_from_port> <trig_to_port>] proto: 1. TCP+UDP, 2. TCP, 3. UDP [Mode] sys server access port access [Mode] ip urlfilter customize disp add [string] delete [id] clearall [Mode] MAC Filtering URL Filtering web <0:disabled|1:enabled> web <portnum> telnet <0:disabled|1:enabled> Remote Management [on|off|clear|edit <in_proto> [on|off|clear|edit <in_proto>

<in_from_port>

<in_from_port>

ip macfilter customize disp add [mac_addr] delete [id] clearall [Mode] ip ipfilter customize disp add delete [id] clearall [Mode] qos disableif enableif lanoutput [output rate] wanoutput [output rate] [Policy addpolicytab disableip enableip addiptab disablemac enablemac addmactab show [PolicyName][MAC][[Comme nt]] policytab iptab mactab delallpolicy delallip [PolicyName][IP][[Comment ]] Name][LAN Out Out Rate][WAN Rate][[Comment]] Traffic Control(Qos) [ip_addr] <1:tcp+udp|2:tcp|3:udp> IP Filtering

delallmac delpolicy delip delmac [Mode] dos disabledos enabledos <clearall>[Packets/Second] <selectall>[Packets/Second] <sysfloodsyn>[Packets/Seco nd]<sysfloodfin>[Packets/Se cond]<sysfloodudp>[Packet s/Second]<sysfloodicmp>[P ackets/Second]<persrcipfloo dsyn>[Packets/Second]<per enable srcipfloodfin>[Packets/Secon d]<persrcipfloodudp>[Packe ts/Second]<persrcipfloodicm p><tcpudpportscan ><icmpsmurf><ipland><ips poof><ipteardrop><pingofd eath><tcpscan><tcpsynwit hdata><udpbomb><udpech ochargen><srcipblocktime >[sec] DoS Setting [Policy] [IP] [MAC]

<sysfloodsyn><sysfloodfin> <sysfloodudp><sysfloodicm p><persrcipfloodsyn><pers rcipfloodfin><persrcipfloodu disable dp><persrcipfloodicmp><tc pudpportscan ><icmpsmurf><ipland><ips poof><ipteardrop><pingofd eath><tcpscan><tcpsynwit

hdata><udpbomb><udpech ochargen><srcipblocktime > [Mode] Dynamic DNS ddns <Domain enabledyndns y> <Domain enabletzo disableddns result [Status] ip status [Status] wlan association [TCP/IP] LAN Interface Setup ip address subnetmask gateway dhcp [addr] [netmask] [addr] on off client [start_ip <end_ip>] status dns server [ip1 <ip2> <ip3>] status [Reboot] Reboot System reboot [Other] Password sys password [pw] (if [pw] is empty, then [client|server|relay <server_ip>] Active Wireless Client Table Statistics y> Name><User Name/Email><Password/Ke Name><User Name/Email><Password/Ke

clear the password) [Other] Save / Reload Setting save factorydefault [Other] NTP sys ntp showcurrenttime setcurrenttime enablentp timezoneselect ntpserver disablentp [Other] System Log sys log disable enablesysall enablewlanonly clear [showsysall] [showwlanonly] <zone num> <servernum> manualipsetting <ip> <yyyy/mm/dd/hh/MM/ss>