BGD712C

750 MHz, 18 dB gain push-pull amplier

1. Product prole
1.1 General description
Hybrid high dynamic range amplier module in SOT115J package operating at a supply voltage of 24 V (DC).
CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

1.2 Features
I I I I I I Excellent linearity Extremely low noise Excellent return loss properties Silicon nitride passivation Rugged construction Gold metallization ensures excellent reliability

1.3 Applications
I CATV systems operating in the 40 MHz to 750 MHz frequency range.

1.4 Quick reference data

Quick reference data Parameter power gain total current Conditions f = 45 MHz f = 750 MHz VB = 24 V
[1]

Min 18.2 19 380

Typ -

Max 18.8 20 410

Unit dB dB mA

The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.

Philips Semiconductors

BGD712C
750 MHz, 18 dB gain push-pull amplier

2. Pinning information
Table 2: Pin 1 2 3 5 7 8 9 Pinning Description input common common +VB common common output
1 3 5 7 9 1 5 9

Simplied outline

Symbol

2 3 7 8
sym095

3. Ordering information
Table 3: Ordering information Package Name BGD712C Description rectangular single-ended package; aluminium ange; 2 vertical mounting holes; 2 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads Version SOT115J Type number

4. Limiting values
Table 4: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VB Vi Tstg Tmb Parameter supply voltage input voltage storage temperature mounting base temperature Conditions Min 40 20 Max 30 70 +100 +100 Unit V dBmV C C

BGD712C_1

Koninklijke Philips Electronics N.V. 2006. All rights reserved.

Product data sheet

Rev. 01 2 May 2006

2 of 7

Philips Semiconductors

BGD712C
750 MHz, 18 dB gain push-pull amplier

5. Characteristics
Table 5: Characteristics Bandwidth 40 MHz to 750 MHz; VB = 24 V; Tmb = 35 C; ZS = ZL = 75 . Symbol Gp SL FL Parameter power gain slope cable equivalent atness of frequency response Conditions f = 45 MHz f = 750 MHz f = 45 MHz to 750 MHz f = 45 MHz to 100 MHz f = 100 MHz to 700 MHz f = 700 MHz to 750 MHz S11 S22 s21 CTB input return losses output return losses phase response composite triple beat f = 45 MHz to 790 MHz f = 45 MHz to 790 MHz f = 50 MHz 112 channels at; Vo = 44 dBmV; measured at 745.25 MHz 60 channels at; Vo = 44 dBmV measured at 745.25 MHz 79 channels at; Vo = 44 dBmV measured at 547.25 MHz CSO composite second-order distortion 112 channels at; Vo = 44 dBmV; measured at 746.5 MHz 60 channels at; Vo = 44 dBmV measured at 746.5 MHz 79 channels at; Vo = 44 dBmV measured at 548.5 MHz NF Itot
[1]

Min 18.2 19.0 0.5 17 17 135 -

Typ -

Max 18.8 20.0 1.5 0.35 0.5 0.15 225 62

Unit dB dB dB dB dB dB dB dB deg dB

67

dB

68

dB

63

dB

70

dB

68

dB

noise gure total current

f = 50 MHz f = 750 MHz

380

7 7 410

dB dB mA

The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.

BGD712C_1

Koninklijke Philips Electronics N.V. 2006. All rights reserved.

Product data sheet

Rev. 01 2 May 2006

3 of 7

Philips Semiconductors

BGD712C
750 MHz, 18 dB gain push-pull amplier

6. Package outline
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads

SOT115J

D E Z p

A2 1 A L F S W d U2 B y M B p Q e e1 q2 q1 y M B x M B b w M 2 3 5 7 8 9

U1

5 scale

10 mm

DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. 9.1 b c d D E max. max. max. e e1 F L min. p Q max. q q1 q2 S U1 U2 W w x y 0.1 Z max. 3.8

mm 20.8

4.15 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 3.85 0.38

2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7 44.25 7.8 UNC

OUTLINE VERSION SOT115J

REFERENCES IEC JEDEC JEITA

EUROPEAN PROJECTION

ISSUE DATE 99-02-06 04-02-04

Fig 1. Package outline SOT115J

Product data sheet

Rev. 01 2 May 2006

4 of 7

Philips Semiconductors

BGD712C
750 MHz, 18 dB gain push-pull amplier

7. Revision history
Table 6: Revision history Release date 20060502 Data sheet status Product data sheet Change notice Supersedes Document ID BGD712C_1

BGD712C_1

Koninklijke Philips Electronics N.V. 2006. All rights reserved.

Product data sheet

Rev. 01 2 May 2006

5 of 7

Philips Semiconductors

BGD712C
750 MHz, 18 dB gain push-pull amplier

8. Legal information
8.1 Data sheet status
Product status[3] Development Qualication Production Denition This document contains data from the objective specication for product development. This document contains data from the preliminary specication. This document contains the product specication.

Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]

Please consult the most recently issued document before initiating or completing a design. The term short data sheet is explained in section Denitions. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.semiconductors.philips.com.

8.2

Denitions

Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modications or additions. Philips Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Philips Semiconductors sales ofce. In case of any inconsistency or conict with the short data sheet, the full data sheet shall prevail.

malfunction of a Philips Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Philips Semiconductors accepts no liability for inclusion and/or use of Philips Semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the customers own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specied use without further testing or modication. Limiting values Stress above one or more limiting values (as dened in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale Philips Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.semiconductors.philips.com/prole/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Philips Semiconductors. In case of any inconsistency or conict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

8.3

Disclaimers

General Information in this document is believed to be accurate and reliable. However, Philips Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes Philips Semiconductors reserves the right to make changes to information published in this document, including without limitation specications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use Philips Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or

8.4

Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.

9. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales ofce addresses, send an email to: sales.addresses@www.semiconductors.philips.com

BGD712C_1

Koninklijke Philips Electronics N.V. 2006. All rights reserved.

Product data sheet

Rev. 01 2 May 2006

6 of 7

Philips Semiconductors

BGD712C
750 MHz, 18 dB gain push-pull amplier

10. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 8.2 8.3 8.4 9 10 Product prole . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Denitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 4 5 6 6 6 6 6 6 7

Please be aware that important notices concerning this document and the product(s) described herein, have been included in section Legal information.

Koninklijke Philips Electronics N.V. 2006.

All rights reserved.

For more information, please visit: http://www.semiconductors.philips.com. For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com. Date of release: 2 May 2006 Document identifier: BGD712C_1