Scribd
Upload
46 views4 pages

Compensation Components en

This document provides technical specifications for accessories used in vacuum technology, including height compensators and angle compensators. Height compensators gently handle workpieces by compensating for excess stroke or thickness tolerances, and come in sizes of 5, 10, or 20 mm with vacuum ports of M5, Gx, or G1/4. Angle compensators provide a ±15 degree swivel angle between suction cups and holders and are available in sizes of 3, 4, or 5 with threaded connections. Both accessories have operating temperatures of 0-60 degrees Celsius and housings made of aluminum with nitrile rubber seals.

Uploaded by

Bernadus Pranata
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views4 pages

Compensation Components en

This document provides technical specifications for accessories used in vacuum technology, including height compensators and angle compensators. Height compensators gently handle workpieces by compensating for excess stroke or thickness tolerances, and come in sizes of 5, 10, or 20 mm with vacuum ports of M5, Gx, or G1/4. Angle compensators provide a ±15 degree swivel angle between suction cups and holders and are available in sizes of 3, 4, or 5 with threaded connections. Both accessories have operating temperatures of 0-60 degrees Celsius and housings made of aluminum with nitrile rubber seals.

Uploaded by

Bernadus Pranata
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Accessories for vacuum technology

Accessories for vacuum technology


Technical data Height compensator VAL

-Q-

-H-

Note

Temperature range 10 +60 C

For suction cup VAS/VASB Internet: vas

General technical data Size Design Operating medium Mounting position Type of mounting Vacuum port Operating pressure Ambient conditions Size Housing Seals Note on material Ambient temperature

10

20

[bar]

Vacuum port on top Atmospheric air Any Mounting on the male thread or via the female air connection thread of the housing M5 Gx G 0.95 8

5 Aluminium Nitrile rubber Free of copper, PTFE and silicone 10 +60

10

20

[C]

Gentle handling of the workpieces by compensating for any excess stroke of the handling device or tolerance differences in the workpiece thickness.

1 2 4 5

Vacuum generator Distributor Suction cup Height compensator

2009/09 Subject to change

Internet: www.festo.com/catalogue/...

Accessories for vacuum technology


Technical data Dimensions

1 Spring travel for height compensator Type VAL-M5-5 VAL- x-10 VAL--20 B 5 6 8 D

2 Suction cup connector

D1 M5 Gx G

D2 8 13 17

D3 2 3 4

L 46 66 100

L1 35 50 73

L2 25.5 39 60

L3 2 2.5 2.5

L4 4.5 5.5 6.5

L5 5 10 20

19 27 32

1 7 12 16

M16x1 M22x1.5 M26x1.5

Ordering data Height compensator [mm] 5 10 20


1)

Vacuum port M5 Gx G

Part No. 151 209 151 210 151 211

Type VAL-M5-51) VAL-x-101) VAL--201)

Free of copper, PTFE and silicone

Internet: www.festo.com/catalogue/...

Subject to change 2009/09

Accessories for vacuum technology


Technical data Angle compensator ESWA

-Q-

-H-

Note

Temperature range 0 +60 C

For suction gripper ESG, between suction cup and suction cup holder Internet: esg

General technical data Holder size Design Operating medium Mounting position Type of mounting Ambient conditions Holder size Housing Seals Ambient temperature Corrosion resistance
1)

3 Ball joint with 15 swivel angle Atmospheric air Any With threaded connection

3 Aluminium Nitrile rubber 0 +60 1

[C] CRC1)

Corrosion resistance class 1 according to Festo standard 940 070 Components requiring low corrosion resistance. Transport and storage protection. Parts that do not have primarily decorative surface requirements, e.g. in internal areas that are not visible or behind covers.

Weights [g] Holder size ESWA- Dimensions

3 9

4 19

5 57

Type ESWA-3 ESWA-4 ESWA-5 Ordering data Holder size 3 4 5

D1 15 20 28

D2 M4x0.7 M6x1 M10x1.5

L1 23 28.5 40.5

L2 4 6 10

Part No. 191 205 191 206 191 207

Type ESWA-3 ESWA-4 ESWA-5

2009/09 Subject to change

Internet: www.festo.com/catalogue/...

You might also like