2N5086 / MMBT5086 / 2N5087 / MMBT5087

2N5086 2N5087

MMBT5086 MMBT5087
C

E C B

TO-92
E

SOT-23
Mark: 2P / 2Q

PNP General Purpose Amplifier

This device is designed for low level, high gain, low noise general purpose amplifier applications at collector currents to 50 mA.

Absolute Maximum Ratings*

Symbol
VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous

TA = 25C unless otherwise noted

Parameter

Value
50 50 5.0 100 -55 to +150

Units
V V V mA C

Operating and Storage Junction Temperature Range

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors.

Thermal Characteristics
Symbol

TA= 25C unless otherwise noted

Characteristic
2N5086 2N5087 625 5.0 83.3 200

Max
*MMBT5086 *MMBT5087 350 2.8 357

Units

PD RJC RJA

Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient

mW mW/C C/W C/W

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."

2001 Fairchild Semiconductor Corporation

2N5086/2N5087/MMBT5086/MMBT5087, Rev A

2N5086 / MMBT5086 / 2N5087 / MMBT5087

PNP General Purpose Amplifier

(continued)

Electrical Characteristics
Symbol Parameter

TA= 25C unless otherwise noted

Test Conditions

Min

Max

Units

OFF CHARACTERISTICS
V(BR)CEO V(BR)CBO ICBO IEBO Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current IC = 1.0 mA, IB = 0 IC = 100 A, IE = 0 VCB = 10 V, IE = 0 VCB = 35 V, IE = 0 VEB = 3.0 V, IC = 0 50 50 10 50 50 V V nA nA nA

ON CHARACTERISTICS
hFE DC Current Gain IC = 100 A, VCE = 5.0 V IC = 1.0 mA, VCE = 5.0 V IC = 10 mA, VCE = 5.0 V VCE(sat) VBE(on) Collector-Emitter Saturation Voltage Base-Emitter On Voltage IC = 10 mA, IB = 1.0 mA IC = 1.0 mA, VCE = 5.0 V 5086 5087 5086 5087 5086 5087 150 250 150 250 150 250 500 800

0.3 0.85

V V

SMALL SIGNAL CHARACTERISTICS

fT Ccb hfe NF Current Gain - Bandwidth Product Collector-Base Capacitance Small-Signal Current Gain Noise Figure IC = 500 A,VCE= 5.0 V,f= 20 MHz VCB = 5.0 V, IE = 0, f = 100 kHz IC = 1.0 mA, VCE = 5.0, f = 1.0 kHz IC = 100 A, VCE = 5.0 V, RS = 3.0 k , f = 1.0 kHz IC = 20 A, VCE = 5.0 V, RS = 10 k , f = 10 Hz to 15.7 kHz 5086 5087 5086 5087 5086 5087 40 4.0 150 250 600 900 3.0 2.0 3.0 2.0 MHz pF

dB dB dB dB

*Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%

NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.

Spice Model
PNP (Is=6.734f Xti=3 Eg=1.11 Vaf=45.7 Bf=254.1 Ne=1.741 Ise=6.734f Ikf=.1962 Xtb=1.5 Br=2.683 Nc=2 Isc=0 Ikr=0 Rc=1.67 Cjc=6.2p Mjc=.301 Vjc=.75 Fc=.5 Cje=7.5p Mje=.2861 Vje=.75 Tr=10.1n Tf=467.8p Itf=.17 Vtf=5 Xtf=8 Rb=10)

2N5086 / MMBT5086 / 2N5087 / MMBT5087

PNP General Purpose Amplifier

(continued)

Typical Characteristics

350
V CB = 5V

VCESAT - COLLECTOR EMITTER VOLTAGE (V)

h F E- TYPICAL PULSED CURRENT GAIN

Typical Pulsed Current Gain vs Collector Current

300 250 200 150 100
- 40 C 25 C 125 C

Collector-Emitter Saturation Voltage vs Collector Current

0.3 0.25 0.2 0.15
25 C

= 10

0.1 0.05 0 0.1

125 C - 40 C

50 0.01 0.03

0.1 0.3 1 3 10 30 I C - COLLECTOR CURRENT (mA)

100

1 10 I C - COLLECTOR CURRENT (mA)

V BEON - BAS E EMITTER ON VOLTAGE (V)

Base-Emitter Saturation Voltage vs Collector Current

V BESAT - BASE EMITTE R VOLTAGE (V) 1 0.8
- 40 C

Base Emitter ON Voltage vs Collector Current

1

0.8
- 40 C 25 C 125 C

0.6 0.4 0.2 0 0.1

25 C 125 C

0.6 0.4 0.2 0 0.1

V CE = 5V

= 10

1 10 I C - COLLECTOR CURRENT (mA)

50

1 10 I C - COLLECTOR CURRE NT (mA)

25

Collector-Cutoff Current vs Ambient Temperature

I CBO - COLLECTOR CURRENT (nA) 100
V CB = 40V

Input and Output Capacitance vs Reverse Bias Voltage

20 f = 1 MHz CAPACITANCE (pF) 16 12 8
C ibo

10

0.1

4 0

C obo

0.01 25

50 75 100 TA - AMBIENT TEMP ERATURE ( C)

125

8 12 16 REVERSE BIAS VOLTAGE (V)

20

2N5086 / MMBT5086 / 2N5087 / MMBT5087

PNP General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

- GAIN BANDWIDTH PRODUCT (MHz)

Gain Bandwidth Product vs Collector Current

350 300 250 200 150 100 50 0 0.1 1 10 I C - COLLECTOR CURRENT (mA) 100 V CE = 5V NF - NOISE FIGURE (dB)

Noise Figure vs Frequency

5 V CE = 5V 4

3 I C = - 250 A, R S = 5.0 k 2 I C = - 500 A, R S = 1.0 k

I C = - 20 A, R S = 10 k 1000 10000 f - FREQUENCY (Hz) 1000000

0 100

Wideband Noise Frequency vs Source Resistance

V CE = 5V NF - NOISE FIGURE (dB)
BANDWIDTH = 15.7 kHz

Power Dissipation vs Ambient Temperature

625 P D - POWER DISSIPATION (mW)

TO-92
500 375 250 125 0

6 I C = 10 A 4 I C = 100 A

SOT-23

1,000

2,000

5,000

10,000

20,000

50,000

100,000

25

R S - SOURCE RESISTANCE ( )

50 75 100 TEMPERATURE ( o C)

125

150

2 n - EQUIVALENT INPUT NOISE CURRENT (pA/ Hz)

- EQUIVALENT INPUT NOISE VOLTAGE ( V/ Hz)

Equivalent Input Noise Current vs Collector Current

10 5 2 1 0.5 0.2 0.1 0.001 0.01 0.1 I C - COLLECTOR CURRENT (mA) 1 V CE = - 5.0V
,f= H 1 00 z

Equivalent Input Noise Voltage vs Collector Current

0.1 0.05 0.02 0.01 0.005
e n , f = 1.0 kHz e n , f = 100 Hz

V CE = - 5.0V

in

i n

,f= , i n

z kH 1.0 z kH 10 f=

0.002 0.001 0.001

e n , f = 10 kHz

2 n

0.01 0.1 I C - COLLECTOR CURRENT (mA)

2N5086 / MMBT5086 / 2N5087 / MMBT5087

PNP General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

Contours of Constant Narrow Band Noise Figure

R S - SOURCE RESISTANCE ( ) R S - SOURCE RESISTANCE ( )
1,000,000 1,000,000

Contours of Constant Narrow Band Noise Figure

12 dB 8.0 dB 5.0 dB 3.0 dB
5.0 dB 8.0 dB 12 dB
V CE = - 5V f = 100 Hz BANDWIDTH = 15 Hz

100,000

1.0 dB
10,000

10 dB 6.0 dB 4.0 dB 2.0 dB

100,000

4.0 dB 6.0 dB 10 dB
V CE = - 5V f = 10 kHz BANDWIDTH = 1.5 kHz

10,000

1,000

1,000

100

100

0.001

0.01 0.1 I C - COLLECTOR CURRENT (mA)

0.001

0.01 0.1 I C - COLLECTOR CURRENT (mA)

Contours of Constant Narrow Band Noise Figure

R S - SOURCE RESISTANCE ( )
10
6.0 dB 4.0 dB

Contours of Constant Narrow Band Noise Figure

R S - SOURCE RESISTANCE ( )
10,000

1,000,000

dB

V CE = - 5V f = 1.0 kHz BANDWIDTH = 150 Hz

0 6. dB
0 4.

5,000

dB

100,000

0 2. dB

2,000 1,000 500

4. 0
6.0 dB

10,000

4.0

dB

dB
6.0 dB 10 dB

1,000

V CE = - 5V f = 10 MHz 200 BANDWIDTH = - 2 kHz

100

100

0.001

0.01 0.1 I C - COLLECTOR CURRENT (mA)

0.01

0.1 1 I C - COLLECTOR CURRENT (mA)

10

2N5086 / MMBT5086 / 2N5087 / MMBT5087

PNP General Purpose Amplifier

(continued)

Typical Common Emitter Characteristics

(f = 1.0 kHz)

HARACTERIS TICS REL. TO VALUE, VCE=-5.0V

HARACTERISTICS REL. TO VALUE , I C =1.0mA

Typical Common Emitter Characteristics

1.6 1.4 1.2 1 h oe 0.8 f = 1.0 kHz 0.6 I C = 1.0 mA TA = -25C 0.4 0 -5 -10 -15 -20 V CE- COLLECTOR-EMITTE R VOLTAGE (V) -25 h fe and h ie

Typical Common Emitter Characteristics

100 h oe 10 h fe 1

0.1

f = 1.0 kHz VCE = -5.0V TA = -25C

h ie

0.01 0.1

0.2 0.5 1 2 5 I C - COLLECTOR CURRE NT (mA)

10

CHARACTERIS TICS REL. TO VALUE, TA= 25C

Typical Common Emitter Characteristics

2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 -60 -40 h ie -20 0 20 40 60 80 T A - AMBIE NT TEMP ERATURE ( C) 100 h fe and h oe h oe h fe VCE = -5.0V I C = 1.0 mA f = 1.0 kHz h ie

TO-92 Tape and Reel Data

TO-92 Packaging Configuration: Figure 1.0

TAPE and REEL OPTION
FSCINT Label sample
FAIRCHILD SEMICONDUCTOR CORPORATION LOT:

CBVK741B019

HTB:B QTY: 10000

See Fig 2.0 for various Reeling Styles

NSID:

PN2222N

SPEC:

D/C1:

D9842

SPEC REV: QA REV:

B2

FSCINT Label
(FSCINT)

5 Reels per Intermediate Box F63TNR Label Customized Label 375mm x 267mm x 375mm Intermediate Box

F63TNR Label sample

LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: QTY1: QTY2: QTY: 2000 SPEC: SPEC REV: CPN: N/F: F

Customized Label

(F63TNR)3

TO-92 TNR/AMMO PACKING INFROMATION

Packing Reel Style A E Ammo M P Quantity 2,000 2,000 2,000 2,000 EOL code D26Z D27Z D74Z D75Z

AMMO PACK OPTION

See Fig 3.0 for 2 Ammo Pack Options

Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units

FSCINT Label 327mm x 158mm x 135mm Immediate Box Customized Label 5 Ammo boxes per Intermediate Box F63TNR Label 333mm x 231mm x 183mm Intermediate Box

Customized Label

(TO-92) BULK PACKING INFORMATION

EOL CODE J18Z J05Z NO EOL CODE DESCRIPTION TO-18 OPTION STD TO-5 OPTION STD TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 LEADCLIP DIMENSION NO LEAD CLIP NO LEAD CLIP NO LEADCLIP QUANTITY 2.0 K / BOX 1.5 K / BOX 2.0 K / BOX

BULK OPTION
See Bulk Packing Information table Anti-static Bubble Sheets

FSCINT Label

L34Z

NO LEADCLIP

2.0 K / BOX

2000 units per EO70 box for std option

114mm x 102mm x 51mm Immediate Box

5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label

FSCINT Label 10,000 units maximum per intermediate box for std option

2001 Fairchild Semiconductor Corporation

March 2001, Rev. B1

TO-92 Tape and Reel Data, continued

TO-92 Reeling Style Configuration: Figure 2.0

Machine Option A (H) Machine Option E (J)

Style A, D26Z, D70Z (s/h)

Style E, D27Z, D71Z (s/h)

TO-92 Radial Ammo Packaging Configuration: Figure 3.0

FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE D74Z (M)

ORDER STYLE D75Z (P)

FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM

FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP

September 1999, Rev. B

TO-92 Tape and Reel Data, continued

TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0

Hd P Pd

b Ha H1 HO d L L1 W1 S WO W2 W

t1 P1 F1 P2 DO ITEM DESCRIPTION PO Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Length Taped Lead Length Taped Lead Thickness Carrier Tape Thickness SYMBOL b Ha HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S DIMENSION 0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (+0.009, -0.010) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.018 (+0.002, -0.003) 0.429 (max) 0.209 (+0.051, -0.052) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.708 (+0.020, -0.019) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (+0.008, -0.007) 0.004 (max)

User Direction of Feed

TO-92 Reel Configuration: Figure 5.0

Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out

Note : All dimensions are in inches.

ELECT ROSTATIC SEN SITIVE D EVICES

D4

D1 ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM

F63TNR Label Customized Label

D2

Reel Diameter Arbor Hole Diameter (Standard) (Small Hole) Core Diameter Hub Recess Inner Diameter Hub Recess Depth Flange to Flange Inner Width W1 Hub to Hub Center Width W3 Note: All dimensions are inches

D1 D2 D2 D3 D4 W1 W2 W3

13.975 1.160 0.650 3.100 2.700 0.370 1.630

14.025 1.200 0.700 3.300 3.100 0.570 1.690 2.090

W2

D3

July 1999, Rev. A

TO-92 Package Dimensions

TO-92 (FS PKG Code 92, 94, 96)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]

Part Weight per unit (gram): 0.1977

2000 Fairchild Semiconductor International

January 2000, Rev. B

SOT-23 Tape and Reel Data

SOT-23 Packaging Configuration: Figure 1. 0
Customized La bel
Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a m ultilayer film (Heat Activated Adhesive in na ture) primarily composed of polyester film, adhesive layer, sealan t, and an ti-static sprayed agent. These reeled pa rts in stan da rd option are shippe d with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color an d is made of polystyrene plastic (antistatic coated ). Othe r option comes in 10,000 units per 13" or 330cm diameter reel. This and s ome other options are describe d in the P ackaging Information table. These full reels are individua lly labele d an d placed inside a s tanda rd intermediate made of recyclable corrugated brown pap er with a Fairchil d logo printing. One pizza box contains eight reels maximum. And thes e intermed iate boxes are placed inside a labeled shipping box which comes in different sizes depending on t he nu mber of parts shippe d.

Antistatic Cover Tape

Human Readable Label

Embossed Carrier Tape

3P
SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code ) TNR 3,000 7" Dia 187x107x183 24,000 0.0082 0.1175 D87Z TNR 10,000 13" 343x343x64 30,000 0.0082 0.4006

3P

3P

3P

SOT-23 Unit Orientation

343mm x 342mm x 64mm Intermediate box for L87Z Option Human Readable Label

Human Readable Label sample

H uman readable Label

SOT-23 Tape Leader and Trailer Configuration: Figure 2. 0

187mm x 107mm x 183mm Intermediate Box for Stand ard Option

Carrier Tape Cover Tape

Components Trailer Tape 300mm minimum or 75 empt y poc kets Leader Tape 500mm minimum or 125 empty pockets

2000 Fairchild Semiconductor International

September 1999, Rev. C

SOT-23 Tape and Reel Data, continued

SOT-23 Embossed Carrier Tape Configuration: Figure 3.0
P0 T E1 P2 D0 D1

F E2 B0 Wc

Tc K0

P1

A0

User Direction of Feed

Dimensions are in millimeter Pkg type SOT-23 (8mm)

A0
3.15 +/-0.10

B0
2.77 +/-0.10

W
8.0 +/-0.3

D0
1.55 +/-0.05

D1
1.125 +/-0.125

E1
1.75 +/-0.10

E2
6.25 min

F
3.50 +/-0.05

P1
4.0 +/-0.1

P0
4.0 +/-0.1

K0
1.30 +/-0.10

T
0.228 +/-0.013

Wc
5.2 +/-0.3

Tc
0.06 +/-0.02

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line

0.5mm maximum

B0 20 deg maximum component rotation

0.5mm maximum

Sketch A (Side or Front Sectional View)

Component Rotation

A0 Sketch B (Top View)

Typical component center line

Sketch C (Top View)

Component lateral movement

SOT-23 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A Max

Dim A max

Dim N

See detail AA

7" Diameter Option

B Min Dim C See detail AA W3

Dim D min

13" Diameter Option

W2 max Measured at Hub DETAIL AA

Dimensions are in inches and millimeters

Tape Size
8mm

Reel Option
7" Dia

Dim A
7.00 177.8 13.00 330

Dim B
0.059 1.5 0.059 1.5

Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2

Dim D
0.795 20.2 0.795 20.2

Dim N
2.165 55 4.00 100

Dim W1
0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0

Dim W2
0.567 14.4 0.567 14.4

Dim W3 (LSL-USL)
0.311 0.429 7.9 10.9 0.311 0.429 7.9 10.9

8mm

13" Dia

September 1999, Rev. C

SOT-23 Package Dimensions

SOT-23 (FS PKG Code 49)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]

Part Weight per unit (gram): 0.0082

2000 Fairchild Semiconductor International

September 1998, Rev. A1

TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx Bottomless CoolFET CROSSVOLT DOME E2CMOSTM EnSignaTM FACT FACT Quiet Series FAST
DISCLAIMER

FASTr GlobalOptoisolator GTO HiSeC ISOPLANAR MICROWIRE OPTOLOGIC OPTOPLANAR PACMAN POP

PowerTrench QFET QS QT Optoelectronics Quiet Series SILENT SWITCHER SMART START SuperSOT-3 SuperSOT-6 SuperSOT-8

SyncFET TinyLogic UHC VCX

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

Preliminary

First Production

No Identification Needed

Full Production

Obsolete

Not In Production

This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.

Rev. G

This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.