Sandvik LH203
TECHNICAL SPECIFICATION LH203-08 (12.11.2010)
1/3
Sandvik Mining and Construction reserves the right to change this specification without further notice
ISO 9001
ISO 14001
Sandvik Mining and Construction Oy P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130 www.smc.sandvik.com
CERTIFICATED FIRM
CERTIFICATED FIRM
Sandvik LH203
Main dimensions
Total length Width without bucket Maximum width Height without safety canopy Height with safety canopy 7 040 mm (277") 1 420 mm (56") 1 480 mm (58") 1 595 mm (63) 1 840 mm (72") Size and type
TECHNICAL SPECIFICATION LH203-08 (12.11.2010)
2/3
Standard tyres
12.00x20 L5S, 20ply Brand and type subject to availability Air pressure, front 600 kPa (6,0 bar) (87.1 psi) Air pressure, rear 350 kPa (3,5 bar) (50.8 psi) Other type of tyres available to users choice. In certain applications the productive capabilities of the loader may exceed the TKPH value given by tyre manufacturer. Sandvik Mining and Construction Oy recommends that the user consult their tyre supplier to evaluate conditions and to find the best solution for application.
Weights
Operating weight 8700 kg (19 180 lb) Total loaded weight 12 200 kg (26 897 lb) Shipping weight 8500 kg (18 739 lb) Axle weights without load: front axle 3700 kg (8 157 lb) rear axle 5000 kg (11 023 lb) Axle weights with load: front axle 9050 kg (19 952 lb) rear axle 3150 kg (6 945 lb) Unit weight is dependent on the selected options
Standard Canopy
ROPS/FOPS certified safety canopy. Height 1840 mm (72) power steering with controlled by stick. 40 2740 mm (108) 4685 mm (184")
Steering hydraulics
Full hydraulic, centre-point articulation, one double acting cylinder. Steering Emergency steering is optional. Turning angle Turning radius (with std bucket): inner outer Main components in steering system: Main valve Servo control valve Steering cylinder Steering and servo hydraulic pumps Pressure settings: Steering hydraulics Shock load valves
Capacities
Tramming capacity Breakout force, lift Breakout force, tilt Tipping load Bucket std. 3500 kg (7 716 lb) 61 kN (6 220 kg) (13 710 lb) 55 kN (5 600 kg) (12 360 lb) 8300 kg (18 298 lb) 1,5 m (2.0yd), HB500/400 5.5 s 2.9 s 3.0 s 5.0 km/h (3.1 mph) 9.3 km/h (5.8 mph) 24.0 km/h (14.9 mph) Welded steel construction Box constructed, adjustable Engine DEUTZ BF6L914 71,5 kW/2300 r/min (95 hp) 400 Nm 1650 r/min 6 6472 cm Air cooled Turbo charged, direct injection, four stroke 24V Donaldson Double wall exhaust pipe with catalytic purifier / muffler 130 l (43 gal.)
Bucket motion times
Raising time Lowering time Tipping time
100 mm (3,9")
Driving speeds forward and reverse
1st gear 2nd gear 3rd gear
15.0 MPa (150 bar) 20.0 MPa (200 bar)
Bucket hydraulics
Dual stick bucket and boom control. Full hydraulic, mechanically controlled system, equipped with one gear type pump. Oil flows to bucket hydraulic system from the main pump and from the steering hydraulics. Main components: Boom system Direct dump Lift cylinder 180 mm (7.1") Tilt cylinder 140 mm (5.5") Servo control valve Main valve Pump for bucket hydraulics Fittings JIC Pressure setting for: Bucket hydraulics 21.0 MPa (210 bar) Relief valves 24.0 MPa (240 bar) Piston side of the cylinder 6.0 MPa (60 bar) Hydraulic oil tank capacity appr. 120 l (32 gal)
Frame
Rear and front frame Central hinge
Standard engine
Diesel engine Output Torque Number of cylinders Displacement Cooling system Combustion principle Electric system Air filtering Exhaust system Fuel tank capacity
Standard converter
Dana SOH, C2122
Standard brakes
Service brakes are hydraulically operated multi-disc brakes on all wheels with two separate circuits for the front and rear axle. Parking brake is spring applied, hydraulically released dry disk brake affecting on the front axles drive line. In case of a sudden pressure drop in brake hydraulics the parking brake functions also as an emergency brake. Main components in the brake system: Pressure accumulator Brake pedal valve Parking brake Charging valve
Gearbox
Dana SOH, RT20324 Power shift (mechanical gear shift control) transmission, three gears forward and reverse Dana 14D1441 LCB, No-Spin differential, fixed Dana 14D1441 LCB, oscillating 10
Standard axles
Front axle Rear axle Oscillation stabilizer
Standard Lubrication system
Centralized manual lubrication
Sandvik Mining and Construction reserves the right to change this specification without further notice
ISO 9001
ISO 14001
Sandvik Mining and Construction Oy P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130 www.smc.sandvik.com
CERTIFICATED FIRM
CERTIFICATED FIRM
Sandvik LH203
Electrical equipment
Alternator Batteries Starter Driving and working lights: 24 V 55 A, Bosch 2 x 12 V 70 Ah 4 kW, 24 V, Bosch 2 pcs in front, 65 W Nordic lights 2 pcs in rear, 65 W Nordic lights 2 pcs in front, 5W LED lights 2 pcs in rear 5 W LED lights
TECHNICAL SPECIFICATION LH203-08 (12.11.2010)
3/3
Main options:
* replaces standard equipment 3 3 * Bucket size 1.5 m (2.0yd ), width 1690 mm (67), HB500/400. 3 3 * Bucket size 1.75 m (2.3yd ), width 1690 mm (67), HB500/400. 3 3 * Ejector bucket 1.5 m (2.0yd ). Air filtering: oil bath and zyclone * Electrical gear shifter. * Automatic central lubrication. Oil cooler for hydraulic RRC HBC complete RRC HBC interface RRC recovery kit, hook included. Fire suppression system ANSUL, 6 nozzles. Sandvik FS1000 fire suppression system Fire extinguisher 6 kg. Accordance with CE-norms (CEN) Emergency steering (CEN). Disassembly needed shaft dim: TBA. Rotating beacon (CEN with RRC) Wiggins fuel fill system Arctic package (preheater for engine- and hydraulic oil) CatBase/LinkOne spare part manuals and additional Instructions, Workshop, Spare part manuals, ToolMan CDs are available.
Parking and brake lights
Electrical gauges Reverse alarm Lockable main switch
Safety equipment
Seat belt Lockable main switch Reverse alarm
Others
Decal language EU-languages
Standard manuals Instructions Manual -Operator's Manual -Maintenance Manual Parts Manual Service and Repair Manual
ToolMan CD, (2 pcs)
EU-languages EU-languages English English In pdf format
- Instructions Manual -Operator's Manual -Maintenance Manual - Parts Manual - Service and Repair Manual
Sandvik Mining and Construction reserves the right to change this specification without further notice
ISO 9001
ISO 14001
Sandvik Mining and Construction Oy P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130 www.smc.sandvik.com
CERTIFICATED FIRM
CERTIFICATED FIRM
