RANGER 700²

Technical Specification
03275-3
2003-08-13

APPLICATION

Ranger 7002 is a hydraulic, self-propelled, self- Ranger 7002 has an ergonomic cabin to increase
contained, crawler based surface drilling rig operator's safety and visibility. The cabin is certified
equipped with a cabin (F.O.P.S. and R.O.P.S.) and for R.O.P.S. (ISO-3471 Roll-Over Protection Struc-
rod handling system. It drills vertical, inclined or hori- ture) and F.O.P.S. (ISO-3449 Falling Object Protec-
zontal holes with a diameter of 64 - 115 mm (2 ½" - tion Structure). Windows are laminated for added
4 ½") utilizing 38, 45 or 51 mm (1 ½", 1 ¾" or 2") safety. The noise level in the cabin is less than 80
extension rods. dB(A). To keep dust at a minimum, the cabin is fitted
Ranger 7002 is equipped with HL 700, hydraulic top with efficient filters for incoming fresh air. Adjustable
hammer rock drill. With high rotation torque, suffi- seat, good visibility, adequate lighting and an opti-
cient flushing and sophisticated ergonomic drilling mum working temperature are among the many
control system the rig is well suited also in very features ensuring a good operating environment.
fractured rock conditions. The rock drill and articu- Drilling functions are proportionally controlled by one
lated boom are mounted on the turnable super- hydraulic joy-stick. Several routine functions e.g. an-
structure giving a drilling coverage of 17,6 m2 (op- tijamming are executed automatically. There are
tionally 26,4 m2). fewer levers to make it easy to use. Driving, rear jack
and winch control can be done outside the cabin
The powerpack of Ranger 7002 consists of a Cater-
from the optional remote control box.
pillar diesel engine and a gearbox, which divides the
power for hydraulic pumps and flushing air compres- Typical applications for Ranger 7002 are road cut-
sor. The powerpack is mounted crosswise at the rear ting, pipe-line drilling and foundation drilling, as well
end of the superstructure to keep counterweight on as production drilling in medium size quarries.
the opposite side of the boom and feed regardless of Therefore Ranger 7002 is most often used by con-
the drilling direction. struction contractors, mines and quarries, and also
included in the equipment fleet of rental houses as
well.

1/3
 RANGER 700²
Technical Specification
03275-3
2003-08-13

DRILLING DIMENSIONS

90º

30º

Optional 90º

1m
1m

TRANSPORT DIMENSIONS

3600

7200

6540
3200

2590
10700

2/3
 RANGER 700²
Technical Specification
03275-3
2003-08-13

TRANSPORT DIMENSIONS
STANDARD COMPONENTS Weight (without options) 14 700 kg
1. Rock drill HL 700, hydraulic Width 2.5 m
2. Chain feed CF 145H Height 3.6 m / 3.2 m
3. Rod handler RH 714 incl. 1 set of jaws Total length 7.2 m / 10.7 m
4. Boom DB 800, articulated
5. Carrier Track mounted, turnable
THE JAWS FOR DRILL STEELS
superstructure
6. Powerpack Diesel driven, hydraulic Drill steel Drill steel Recommended
pumps and on-board com- type diameter hole diameter
pressor Extension 38 mm 64 - 70 mm
1.
7. Hydraulic system Load sensing and open rods 1 ½" 2 ½" - 2 ¾"
center 38 mm 64 - 70 mm
2. MF-rod
8. Control system THC 700 1 ½" 2 ½" - 2 ¾"
9. Operator's cabin F.O.P.S. and R.O.P.S. Extension 45 mm 76 - 89 mm
10. Dust collection DC 700 H, hydraulic 3.
rods 1 ¾" 3" - 3 ½"
system 45 mm
4. MF-rod 76 - 89 mm
11. Working lights 9 pcs
1 ¾" 3" - 3 ½"
12. Gauge set For accumulator pressure
checking 5. MF-rod 51 mm 89 - 115 mm
13. Reversing alarm 2" 3 ½" - 4 ½"
14. Manuals Service and spare
parts manuals: Note
2 x paper copy - not with 10' MF-rods
- with hose reel only 10' or 12' rods
2 x CD-ROM (Toolman)
- 51 mm (2") / 14’ steels only MF-type
15. EU-safety devices - if several jaws selected please specify jaws
assembled

SELECTION OF OPTIONS

1. Turnable superstructure 180º 18. Sanroc Mini H hydraulic bit grinder

5. Electric angle indicator TIM 2302 with aiming 21. Horizontal drilling kit
unit 22. Hose reel (not with 14' rods)
6. Measuring system TIM 2303 with aiming unit 23. Movable drill steel support
7. Laser based measuring system TIM 2305 24. Radio with CD player
8. Readyness for Power extractor 25. Central lubrication system
9. Electric filling pump for refuelling 26. Kit for alternative steels
10 Remote control box; for rear ground support, 27. Water injection system with tank
driving and oscillation
28. Water injection system w/o tank
11. Remote control box + hydraulic winch with cable
tightness automatics (replaces previous option) 29. Biogradeable hydraulic oil, Shell naturelle HFE
12. Hydraulic rear ground support 46 or HFE 68 (synthetic ester)
13. Three-bar grouser plates 30. Extra manuals

14. Guides for grousers 31. First service kit for Ranger 700²
32. Special tools for HL 700, field kit
15. Fuel operated heater for cabin, hydr. oil and en-
ID 150 734 88
gine
33. Special tools for HL 700, complete
16. Flushing control automatics
ID 150 730 78
17. Shut down of suction for water holes
www.tamrock.com
SANDVIK TAMROCK reserves the right to change this specification without further notice

SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND