RANGER 680²

Technical Specification
06268-1
2006-01-01

APPLICATION

Ranger 6802 is a hydraulic, self-propelled, self- Ranger 6802 has an ergonomic cabin to increase
contained, crawler based surface drilling rig operator's safety and visibility. The cabin is certified
equipped with a cabin (F.O.P.S. and R.O.P.S.) and for R.O.P.S. (ISO-3471 Roll-Over Protection Struc-
rod handling system. It drills vertical, inclined or hori- ture) and F.O.P.S. (ISO-3449 Falling Object Protec-
zontal holes with a diameter of 64 - 102 mm (2 ½" - tion Structure). Windows are laminated for added
4") utilizing 38, 45 or 51 mm (1 ½", 1 ¾", or 2") ex- safety. The noise level in the cabin is less than 80
tension rods. dB(A). To keep dust at a minimum, the cabin is fitted
Ranger 6802 is equipped with HL 650, hydraulic top with efficient filters for incoming fresh air. Adjustable
hammer rock drill. With high rotation torque, suffi- seat, good visibility, adequate lighting and an opti-
cient flushing and sophisticated ergonomic drilling mum working temperature are among the many fea-
control system the rig is well suited also in very frac- tures ensuring a good operating environment. Drilling
tured rock conditions. The rock drill and articulated functions are proportionally controlled by one hy-
boom are mounted on the turnable superstructure draulic joystick. Several routine functions e.g. anti-
giving a drilling coverage of over 17 m2 (optionally jamming are executed automatically. There are
26,4 m2). fewer levers to make it easy to use. Driving, rear jack
and winch control can be done outside the cabin
The powerpack of Ranger 6802 consists of a Cater-
from the optional remote control box.
pillar diesel engine and a gearbox, which divides the
power for hydraulic pumps and flushing air compres- Typical applications for Ranger 6802 are road cut-
sor. The powerpack is mounted crosswise at the rear ting, pipeline drilling and foundation drilling, as well
end of the superstructure to keep counterweight on as production drilling in medium size quarries. There-
the opposite side of the boom and feed regardless of fore Ranger 6802 is most often used by construction
the drilling direction. contractors, mines and quarries, and also included in
the equipment fleet of rental houses as well.

1/3
 RANGER 680²
Technical Specification
06268-1
2006-01-01

DRILLING DIMENSIONS

90º

30º

Optional 90º

1m
1m

TRANSPORT DIMENSIONS

3600

7200

7700
3200

2590
10700

2/3
 RANGER 680²
Technical Specification
06268-1
2006-01-01

STANDARD COMPONENTS TRANSPORT DIMENSIONS

1. Rock drill HL 650, hydraulic Weight (without options) 14 500 kg
2. Chain feed CF 145H Width 2.5 m
3. Rod handler RH 714 incl. 1 set of jaws Height 3.6 m / 3.2 m
4. Boom DB 800, articulated Total length 7.2 m / 10.7 m
5. Carrier Track mounted, turnable
superstructure THE JAWS FOR DRILL STEELS
6. Powerpack Diesel driven, hydraulic
pumps and on-board com- Drill steel Drill steel Recommended
pressor type diameter hole diameter
7. Hydraulic system Load sensing and open Extension 38 mm 64 - 70 mm
1.
center rods 1 ½" 2 ½" - 2 ¾"
8. Control system THC 700 38 mm 64 - 70 mm
2. MF-rod
9. Operator's cabin F.O.P.S. and R.O.P.S. 1 ½" 2 ½" - 2 ¾"
10. Dust collection DC 700 H, hydraulic Extension 45 mm 76 - 89 mm
system 3.
rods 1 ¾" 3" - 3 ½"
11. Working lights 7 pcs 45 mm 76 - 89 mm
12. Gauge set For accumulator pressure 4. MF-rod
1 ¾" 3" - 3 ½"
checking
51 mm 89 - 102 mm
13. Reversing alarm 5. MF-rod
2" 3 ½" - 4"
14. Manuals Service and spare
parts manuals:
2 x paper copy Note
2 x CD-ROM (Toolman) - not with 10' MF-rods
- with hose reel only 10’ or 12’ rods
15. EU-safety devices
- 51 mm (2”) steels only MF-type
- if several jaws selected please specify jaws
assembled

SELECTION OF OPTIONS

1. Turnable superstructure 180° 19. Movable drill steel support

2. Air conditioning 20. Primary separator PE 50
3. Rod greasing system
4. P&Q electric vertical angle indicator (± 6 deg.) 21. Horizontal drilling kit

5. Electric angle indicator TIM 2302 with aiming 22. Hose reel (not with 14’ rods)
unit 23. Radio with CD player
6. Measuring system TIM 2303 with aiming unit 24. Central lubrication system
7. Laser based measuring system TIM 2305 25. Kit for alternative steels
8. Electric filling pump for refuelling 26. Water injection system with tank
9. Remote control box; for rear ground support, 27. Water injection system w/o tank
driving and oscillation
10 Remote control box + hydraulic winch with cable 28. Biogradeable hydraulic oil, Shell naturelle HFE
tightness automatics (replaces previous option) 46 or HFE 68 (synthetic ester)
11. Hydraulic rear ground support 29. Extra manuals

12. Three-bar grouser plates 30. First service kit for Ranger 680²
31. Special tools for HL 650, field kit
13. Towing hook
ID 150 734 88
14. Guides for grousers 32. Special tools for HL 650, complete
15. Fuel operated heater for cabin, hydr. oil and en- ID 150 730 78
gine 33. Antifreeze for air lines
16. Flushing control automatics
17. Shut down of suction for water holes
18. Sanrock Mini H hydraulic bit grinder www.tamrock.sandvik.com
SANDVIK TAMROCK reserves the right to change this specification without further notice

SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND 3/3

Tel.int. +358 205 44 121, Telefax int. +358 205 44 120