chippo
Mobile drum chippers
ActivE feed system Efficient chipping Blower or Conveyor discharge Three Sizes And Many options
application
Highlights
eveloped to give the D highest chip quality with the lowest operating costs
A ctive feed, large, open chipping drum and high-performance discharge systems for high throughput nnovative chipping blade I mounting system arefully designed for high C stability and reliability he right machine for the T job: Three sizes and many options
CHippo On the job
The Chippo is a new generation of mobile chipping machines from Komptech. Choosing a Chippo means choosing the highest level of wood chip quality at the lowest operating costs. Numerous features improve throughput and keep wear, maintenance and energy costs low, including active feed, efficient blade geometry, and conveyor belt discharge. The series extends from the 510 C, one of the most powerful tractor-driven drum chippers, to the medium-upper performance truck-powered 5010 Cd, to the high-performance 8010 C with 780 hp engine.
02
01
Logs energy wood
The Chippo processes logs up to 750 mm diameter. A long, wide feed table helps load logs. Two horizontal feed rollers securely grab even thick logs and pull them into the chipping area, while preventing smaller pieces from turning sideways and getting chipped against the grain. The low drum speed and optional discharge conveyor maximize chipping performance and boost product quality.
02
Forestry residue
On materials that are inherently wearintensive due to their origin, the blade mounting design brings advantages by allowing fast changes and exact positioning. A blade protection system minimizes damage from massive contraries. The movable counter blade has a simple adjustment mechanism for fast, precise cutting gap adjustment after sharpening or blade replacement. If the input material has a large amount of contraries, we recommend low-cost replaceable blades that can simply be scrapped after use.
03
Pruning, tree tops
The vertical feed rollers on the sides help pull in bulky material. The rollers precompress the material as they feed it in, for precise chipping. A higher drum speed boosts the cut frequency and keeps throughput high, in combination with the optional load-dependent feed control. For wet, heavy material, the optional higher fan speed prevents blockages.
Mobile drum chippers
03
inside the machine
Active feed
Innovative Technology for perfect chips.
All Chippo models have the efficient Series 10 feed and chipping system. This arrangement provides sure material capture and active feed to the drum. The open drum configuration and optimum placement of the counter-cutter make chipping extremely efficient. The large 1050 mm drum diameter allows a 750 x 1000 mm intake opening. The adjustable blade advance and different screen baskets let the operator precisely adjust the chip size and obtain a consistent chip shape with minimal fines. Drum drive is by belt pulley and power band with soft start. If desired, a second speed is available, either by a second belt pulley or a planetary gear. Discharge is by a blower (optional with 2 fixed speeds or steplessly adjustable), or a swivelling rear conveyor to save energy and minimize chip damage.
Large tilt hopper with up to 3300 mm loading length eed system consisting of sectional steel F belt, transfer roller, and 2 horizontal and 2 vertical feed rollers ntegrated collection system for leakage I material
01
Variable-speed blower*
01
02
Two-speed chipping drum*
03
Swivelling discharge conveyor*
03
04
Feed with horizontal and verical feed drums
05
Wood splitter*
Option* 04
Chipping blade
Disposable blade
Efficient chipping Large, open drum, optimized for low-friction material discharge xact cutting gap adjustment through E movable counter blade carrier Low-wear screen basket with large screening area, hydraulic run-out for basket changes
Sharp tools 12 tool positions with contrary protection ount takes chipping blade (40 mm M sharpening reserve) or disposable blades Blade change in 20 min Blade advance adjustable from 13-25 mm
Drum drive Chipping drum drive with hydraulic belt clutch econd speed by planetary gear (5010/8010) S or second belt pulley (510) -belt drive for discharge blower and V hydraulic power for additional functions
Discharge systems Material transfer with 3 discharge screws onnectable blower, optional 2-speed or C steplessly adjustable Optional folding and swivelling conveyor (corrugated sidewall belt)
02
04
05
Control raphic control panel with logical menu G guidance Feed stop when discharge is overloaded Load-dependent feed control (option)
Maintenance friendly Wide-opening side panels and doors Easy screen basket change Optional remote control for servicing, central lubrication
Mobile drum chippers
05
Chippo 5010 Cd
Highlights fficient chipping by special E gearing from truck engine xternal cooling E for continuous high performance ctive feed with preA compression by two horizontal and two vertical feed rollers rum speed as desired: D 440 rpm for trunks or 400 & 560 for multipurpose use Options: Truck or crane cab, 3 or 4-axle truck, wood splitter, XL discharge pipe, discharge conveyor and more
5010 Cd
The Chippo 5010 Cd is a mounted variant powered directly from the truck by a purpose-designed drive train. The power (540 PS/397 kW) is supplied by the MAN truck. The operator sits in the comfortable cab on a converted passenger seat and can concentrate fully on working with the powerful machine. The loading crane variant with integrated crane cab offers a perfect view from above.
Efficient working
The Chippo 5010 Cdt (t for turnable) is a new version. The chipping unit is mounted on a solid turntable and swivels hydraulically through 260. With several versions and numerous options, the Chippo 5010 Cd direct can be configured exactly for its task. Feature overview: 3 or 4-axle truck, if desired with Hydrodrive, operation from the truck or crane cab, external cooling system, fold-out wood splitter and more.
06
01
Stay cool with the external radiator
An external cooling system keeps the full engine power available for chipping at all times. Performance drop-off due to overheating is virtually eliminated. The radiator is positioned under the truck cabin, where it cant pick up anything from the ground. A purpose-designed control system provides automatic selfcleaning.
02
Efficient and material-saving - conveyor discharge
The operator can switch to conveyor discharge at the press of a button. The material is discharged by a swivel conveyor from the back of a machine to a height of over 4.7 meters. There is no chip size reduction as there is with a blower. At the same time, due to the lower energy consumption of the conveyor more power is available for chipping.
03
Variable blower power
This discharge blower is available in 2-speed or steplessly adjustable versions. With the latter, the discharge distance can be set exactly, and no power is wasted through excess blowing force. The discharge pipe comes in three lengths, and like the blower, it has easilyreplaceable wear elements in high-load areas.
01
04
The right speed for the job
The basic version of the Chippo 5010 Cd comes with a drum speed of 440 rpm for chipping logs. For all-purpose work, an optional gearbox allows the operator to switch between 400 and 560 rpm (560 rpm for chipping pruning).
05
Wood splitter for the big logs
For logs over 750 mm diameter, a foldout wood splitter can be mounted on the truck. Conveniently located next to the machine, at ground level and well within the crane operators viewing area, the log is placed in the holder and split by a hydraulic wedge.
06
Always at the right side
With this version, the chipping unit is mounted on a solid turntable and swivels hydraulically through 260. Since its powered by the truck engine, the chipping unit remains compact and can turn even on narrow forest roads. Material on both sides of the road can be worked efficiently, without timeconsuming machine turnarounds.
Mobile drum chippers
07
chippo 8010 C & 510 C
Highlights obile high performance M machine with 780 HP auxiliary engine ell-equipped: Tough W carrier truck (MAN) and strong loading crane (Epsilon) with comfortable cab Large drum diameter (1050 mm) allows feeder height of 750 mm hoice of discharge: C -material-friendly and energy-saving discharge via conveyor - flexible and precise via blower with variable rotation speed
Chippo 8010 C
The Chippo 8010 C is the most powerful machine in the Chippo series. Powered by a 780 HP CAT auxiliary engine, the 8010 C produces up to 320 stacked cubic metres per hour. No chipper is more efficient: Its aggressive feed system, large, open two-speed drum, speedadjustable blower and energy-saving discharge conveyor add up to topquality chippings, in high volume, at very low cost.
For professionals
It is mounted on a tough MAN 4-axle truck, with 480 hp engine and optional Hydrodrive (shiftable all wheel drive) to negotiate steep slopes. A powerful Epsilon loading crane with crane cabin and over 10 meter range gives a good action radius and a good view. Coming soon - the Chippo 8010 C in five-axle and tracked versions.
08
Highlights ractor driven chipper T designed for drive rating up to 500 HP ough 2-axle chassis with T tyre options
Chippo 510 C A strong entry
The Chippo 510 C is a tractor-powered chipper, ideal for landscaping and forestry companies, and for anyone planning to get into the chipping business. The machine is designed for a drive rating of up to 500 HP, making it one of the most powerful chippers in this class. In the base configuration, the Chippo 510 C has a sturdy chassis with tandem axle. Numerous options for the tyres, the towing mechanism and the support simplify tailoring to customer requirements. The frame and body are designed for high stability, and doors and panels simplify access for servicing.
Drum speed to customer specification: 400 or 560 rpm or 400 & 560 rpm (2 pulley drives) Options for best working comfort: Remote control for discharge systems, camera on discharge pipe, reversing camera, foot switch etc.
Mobile drum chippers
09
TECHNICAL SPECIFICATIONS
CHIPPO 510 C Drive Type: Power: Material feeding Feed table L x W (mm): Feed table height (mm): Feeder opening H x W (mm): Chipping unit Drum diameter (mm): Drum width (mm): Number of blades: Drum rotation speed standard rpm: Material discharge Blower: max. blower height (mm): Blower: max. discharge range (m): Conveyor belt: max. discharge height (m): Dimensions Transport dimensions L x W x H (mm): without conveyor belt Weight, dependent on equipment (t): Throughput (dependent on material) Throughput performance (m3/h): Options up to 180 6911 x 2550 x 3872 ~ 18.0 5370 20 ~ 4.5 1050 1023 12 400 or 560 2180 x 1680 1600 via PTO tractor tractor up to 370 kW / 500 HP
CHIPPO 5010 Cd
CHIPPO 5010 Cdt
CHIPPO 8010 C
via truck (MAN) 397 kW / 540 HP
via truck (MAN) 397 kW / 540 HP
CAT C18 571 kW / 780 HP
2180 x 1680 1870
1900 x 1680 2230
2180 x 1680 1870
750 x 1000 (with vertical feed drums 1610)
1050 1023 12 440
1050 1023 12 440
1050 1023 12 560
5600 20 ~ 4.7
5600 20
5600 20 ~ 4.7
3 axle: 8031 x 2550 x 4000 4 axle: 8252 x 2550 x 4000 3 axle: ~ 26.0 4 axle: ~ 31.5
4 axle: 8424 x 2550 x 4000 ~ 32.0
4 axle: 9012 x 2550 x 4000 ~ 33.5
up to 220
up to 220
up to 320
Two drum speeds, Screen basket 45, 60, 80 mm, Hopper extension, Automatic regulation of feed speed, Blower discharge pipe (L, XL), Variable blower speed, Preparation conveyor belt discharge, Discharge conveyor belt, Central lubrication, Lorry MAN (3-axle/4-axle), Epsilon wood-loading crane (with cabin/without cabin), Wood gripper, Remote control, Wood splitter and more
10
Chippo 510 C
4510 mm
5131 mm
7210 mm 12904 mm
Chippo 5010 Cd - 3-axle-truck
4783 mm
5404 mm
8031 mm 13725 mm
Chippo 5010 Cd - 4-axle-truck
4783 mm
5404 mm
8252 mm 13946 mm
Chippo 8010 C
4706 mm
5327 mm
9012 mm 14706 mm
figures with options
1870 mm
1870 mm
1870 mm Mobile drum chippers 11
1600 mm
Technology for a better environment
Komptech GmbH Khau 37, A-8130 Frohnleiten [t] +43 3126 505-0 [f] +43 3126 505-505 [e] info@komptech.com Komptech UK Ltd. Forge End, Lodge Farm Kineton Warwickshire, CV35 0JH [t] +44 1926 64 29 72 [f] +44 1926 64 29 71 [e] info.uk@komptech.com
www.komptech.com
We reserve the right to make technical changes due to ongoing development. E2012
