Flanged Valve 7032

DN 15 up to DN 50 PN 40

Pneumatically operated flanged valves for the control

of neutral, lightly and highly aggressive fluids.
• Compact design
• Uneffected by lightly contaminated media
• For temperatures from -30°C up to +200°C
• Working pressures up to 40 bars
• Versatile actuator

Technical Information
Nominal sizes DN 15 up to DN 50
Body material 1.4408 and 1.4436 (CF8M)
Connection Flanges acc. DIN EN 1092-1
Flanges acc. ANSI #150
Dimensions acc. DIN EN 558-1 Row 1
acc. ANSI/ISA-75.08.01
Nominal pressure PN 40, ANSI #150
Max. fluid temperature*:
with metal bonnet -30°C up to +170°C, opt. +200°C
with plastic bonnet -30°C up to +135°C
diaphragm act. stainless steel -30°C up to +200°C
Ambient temperature* -30°C up to +60°C
Viskosity of media maximum 600 mm²/s (600cSt, 80°E)
Vakuum maximum 0,001 bar abs
See tables and diagramms,limitation for Options
dangerous gases acc. Pressure equipment e.g.:
working pressure
directive 2014/68/EU (category I): - Limit switches
PS x DN < 1000 • inductive proximity switch
Working pressure for • electrical contact switch
maximum 12 bar
packing underneath • pneumatical switch
Leakage acc. EN 12266-1 leakage class A - Solenoid valve
*: Please consider further temperature versions and limits in - AS-I control head
technical bulletin 32 - Additional manual operation
- Oil and grease free version
Unscrewable
position indicator
Bonnet brass plated
(actuator Ø 50 mm, Ø 80 mm)
Versatile bonnet aluminium, corrosion protected
(Pilot pressure connection!) (actuator Ø 125 mm)
optional plastic
Directly pressure actuated (with (actuator Ø 50 mm,Ø 80 mm)
solenoid valve if desired), Actu-
ation with air, water, mineral oil
Exterior lip sealing
and other media possible

Piston stainless Packing made of filled PTFE,

steel 1.4571, roller- Special version for cavity-free
polished mounting (packing underneath)

Seating seal PTFE

and other materials

Body

Schubert & Salzer Control Systems GmbH, Bunsenstr. 38, 85051 Ingolstadt, Tel: +49 (0)841-9654 0, Fax: +49 (0)841 9654 590
info.cs@schubert-salzer.com, www.schubert-salzer.com
Flanged Valve 7032
standard design

Spring closes NC (closing with flow) Spring opens NO (closing against flow)
Flanged valves, closing with flow, NO, preferred usage with Normally open flanged valves, closing against the flow.
gaseous media, with liquids closure strokes may occur.

Actuator diameter 50 mm Actuator diameter 50 mm

DN15 DN20
DN15 40

Working pressure [bar]

D50
40
DN20
Working pressure [bar]

35
D50 35

30 30 DN25

25 25

20 DN25 20
DN32
15 15

DN32 DN40
10 10
DN40
5 5

0
0
0 1 2 3 4 5 6
0 1 2 3 4 5 6 7 8 9 10
TYPE 7032-NC-with flow Pilot pressure [bar] Pilot pressure [bar]
TYPE 7032-NO-against flow

maximum pilot pressure 1 bar more than pilot pressure for working pressure

Actuator diameter 80 mm Actuator diameter 80 mm

40
Working pressure [bar]

D80
40
Working pressure [bar]

35
D80 DN32
35 DN25 DN32
DN25

30 30

25 25 DN40
DN40
20 20

15 DN50 15 DN50

10 10

5 5

0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6 7 8 9 10
TYPE 7032-NC-with flow Pilot pressure [bar] Pilot pressure [bar]
TYPE 7032-NO-against flow

maximum pilot pressure 0,8 bar more than pilot pressure for working pressure

Actuator diameter 125 mm Actuator diameter 125 mm

40 40
Working pressure [bar]

D125 D125
Working pressure [bar]

DN32 DN32
35 35

30 30

25
DN40 25 DN40

20
20
DN50
15 DN50
15

10
10

5
5
0
0 1 2 3 4 5 6
0
TYPE 7032-NC-with flow Pilot pressure [bar] 0 1 2 3 4 5 6 7 8 9 10
TYPE 7032-NO-against flow Pilot pressure [bar]

maximum pilot pressure 0,5 bar more than pilot pressure for working pressure
Flanged Valve 7032
standard design

Spring to closed (closing against the flow)

flanged valve, normally closed - closing against the flow, fur use
with liquid and gaseous media

Nominal Working pressure max. Pilot Piston Springs Nominal Working pressure max. Pilot Piston Springs
size (differential pressure) pressure Ø size (differential pressure) pressure Ø
bar bar mm bar bar mm
DN15 15 3,5 - 10 50 1 DN40 1,9 4,5 - 10 50 2
DN15 27 4,5 - 10 50 2 DN40 3,4 5,7 - 10 50 3
DN20 5,1 3,5 - 10 50 1 DN40 6,8 3,5 - 10 80 1
DN20 10 4,5 - 10 50 2 DN40 9,6 4,4 - 10 80 2
DN20 16 5,7 - 10 50 3 DN40 12 5,6 - 10 80 3
DN25 2,3 3,5 - 10 50 1 DN40 6,3 1,3 - 10 125 1
DN25 5,6 4,5 - 10 50 2 DN40 14 2,2 - 10 125 2
DN25 8,9 5,7 - 10 50 3 DN40 20 3,1 - 10 125 3
DN25 20 3,5 - 10 80 1 DN50 4 3,5 - 10 80 1
DN32 3,1 4,5 - 10 50 2 DN50 5,9 4,4 - 10 80 2
DN32 5,1 5,7 - 10 50 3 DN50 7,7 5,6 - 10 80 3
DN32 11 3,5 - 10 80 1 DN50 8,7 2,2 - 10 125 2
DN32 16 4,4 - 10 80 2 DN50 12 3,1 - 10 125 3
DN32 21 5,6 - 10 80 3
DN32 10 1,3 - 10 125 1
DN32 22 2,2 - 10 125 2 Standard (2 Springs)

Flanged Valve 7032, reinforced design

stainless steel DN40 and DN50 PN40

diaphragm actuator,
stainless steel
rolling diaphragm

piston actuator

columne

head section,
reinforced

piston rod reinforced,

stainless steel 1.4571
Flanged Valve 7032
reinforced design
Spring closes NC (closing with flow) Spring opens NO (closing against flow)

Flanged valves, closing with flow, NO, preferred usage with Normally open flanged valves, closing against the flow.
gaseous media, with liquids closure strokes may occur.

Actuator diameter D125 mm Actuator diameter D125 mm

40 40

working pressure [bar]

Working pressure [bar]

D 125 D125
35 35

30 30

DN40 DN50 DN40 DN50

25 25

20 20

15 15

10 10

5 5

0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6 7 8 9 10
TYPE 7032-NC-with flow reinforced Pilot pressure [bar] TYP 7032-NO-against flow reinforced pilot pressure [bar]

maximum pilot pressure 0,5 bar more than pilot pressure for working pressure

Actuator diameter D125 mm PEEK seating seal

40
working pressure [bar]

35
D125
PEEK
30

DN40 DN50
25

20

15

10

0
0 1 2 3 4 5 6 7 8 9 10
TYP 7032-NO-against flow reinforced pilot pressure [bar]

maximum pilot pressure 0,5 bar more than pilot pressure for working pressure

Spring to closed (closing against the flow)

Nominal Working pressure max. Pilot Piston Springs
size (differential pressure) pressure D
bar bar mm
DN40 20 3,1 - 10 125 3
DN40 25 2,8 - 6 250 8
DN50 12 3,1 - 10 125 3
DN50 15 2,2 - 6 250 6
DN50 19 2,8 - 6 250 8
DN50 25 3,7 - 6 250 12
Standard

higher pressures on request

Flanged Valve 7032

Ordering Number System

1 2 3 4 5 6 7 8 9 10 11 12
7 0 3 2 / V S 1 - 6 : Please quote all 6 sections.
7 - 12: Quote only if required.
Symbol: "V": Valve
Type Size "A": Actuator (valve without body)
"R": Repair kit (sealings)

1. Body type 2. Connection 3. Body 4. Seating seal 5. Pilot function 6. Actuator

material
9 flanged 1 flange acc. 2 stainless 0 PTFE (Teflon) 0 NC (closing with flow) 0 piston Ø 50mm
valve DIN EN 1092-1 steel 1 piston Ø 80mm
1 FKM (Viton) 1 NO (closing against flow) 2 piston Ø 125mm
2 flange C diamphragm D250mm
ANSI #150 2 EPDM 2 NC (closing against flow) K piston Ø 50mm with
lenght acc. plastic bonnet
ANSI/ISA 3 NBR (standard 3 Universal, double acting M piston Ø 80mm with
75.08.01 quality) plastic bonnet
7. Springs 8. 9. Packing 10. Temperature version 11. Accessories 12. Special versions
- standard - - standard - standard - no accessories S Special versions
1 electrical position indicator
with one switch
1 1 spring 2 packing H high temperature 2 as above but with two switches M Position indicator
underneath version +200°C 3 manual emergency operation with cable bushing
2 2 springs B high temperature 4 additional manual operation
HT220 5 stroke limitation N Position indicator
3 3 springs U low temperature 6 pilot valve DN 2, 230 V AC with plug connection
T 6 springs version down to 7 pilot valve DN 2, 24 V DC
(D250) -50°C fluid temp. K electr. position indicator compact
W 8 springs W low temperature M position indicator with two ind.
(D250) version down to switches 10 - 36 V DC (PNP)
Y 12 springs -40°C ambient P position indicator with one ind.
(D250) temperarature switches 10 - 36 V DC (PNP)
T position indicator compact,
inductive 10 - 30 V DC (PNP)

Ordering example: 7032/050V912021- - - - 5

Flanged valve type 7032, DN 50, connection DIN flange, body material stainless steel,
seating seal PTFE, NC closing against flow, actuator 80 mm, stroke limitation.

reinforced design (from DN40):

Ordering example: 7032/050V912022-----S--K

Flanged valve type 7032, DN 50, connection DIN-flange, body material stainless steel,
seating seal PTFE, NC closing against flow, actuator D125, reinforced design
„K“ reinforced design
Flanged Valve 7032

Dimensions and Weights, DIN-flanges

I
D

H
G
E

45°

d2

d1
k
d

DN Actuator L D d d1 d2 k E G Stroke I Kvs-Value Weight

(kg)
15 50 130 62 95 45 14 65 147 1/8" 12 34,5 3,1 2,5
20 50 150 62 105 58 14 75 152 1/8" 15,5 34,5 6,5 3,3
25 50 160 62 115 68 14 85 169 1/8" 15,5 34,5 12 3,9
25 80 160 98 115 68 14 85 208 1/4" 20 55 12 5,5
32 50 180 62 140 78 18 100 173 1/8" 15,5 34,5 17 5,5
32 80 180 98 140 78 18 100 212 1/4" 23 55 17,5 7
32 125 180 144 140 78 18 100 236 1/4" 23 80 17,5 9,2
40 50 200 62 150 88 18 110 179 1/8" 15,5 34,5 25 6,6
40 80 200 98 150 88 18 110 218 1/4" 28,5 55 25 8,1
40 125 200 144 150 88 18 110 242 1/4" 28,5 80 25 10,3
50 80 230 98 165 102 18 125 241 1/4" 30 55 40 10,1
50 125 230 144 165 102 18 125 266 1/4" 30 80 40 12,3
Dimensions in mm
Flanged Valve 7032

Dimensions and Weights, flanges ANSI #150

I
D

H
G
E

45°
d2

CF8M
d1

d
k

body ANSI 150 flanges, dimensions acc. ANSI/ISA - 75.08.01

DN Actuator L D d d1 d2 k E G Stroke I Kvs-Value Weight

(kg)
15 50 184 62 88,9 35,1 15,7 60,5 148 1/8" 12 34,5 3,1 2,5
20 50 184 62 98,6 42,9 15,7 69,9 152 1/8" 15,5 34,5 6,5 3,3
25 50 184 62 108 50,8 15,7 79,2 169 1/8" 15,5 34,5 12 3,9
25 80 184 98 108 50,8 15,7 79,2 208 1/4" 20 55 12 5,5
32 50 200 62 117,3 63,5 15,7 88,9 173 1/8" 15,5 34,5 17 5,5
32 80 200 98 117,3 63,5 15,7 88,9 212 1/4" 23 55 17,5 7
32 125 200 144 117,3 63,5 15,7 88,9 236 1/4" 23 80 17,5 9,2
40 50 222 62 127 73,2 15,7 98,6 179 1/8" 15,5 34,5 25 6,6
40 80 222 98 127 73,2 15,7 98,6 217 1/4" 28,5 55 25 8,1
40 125 222 144 127 73,2 15,7 98,6 242 1/4" 28,5 80 25 10,3
50 80 254 98 152,4 91,9 19,1 120,7 241 1/4" 30 55 40 10,1
50 125 254 144 152,4 91,9 19,1 120,7 266 1/4" 30 80 40 12,3
Dimensions in mm
Flanged Valve 7032
reinforced design

Dimensions and Weights, DIN-flanges

G
E

45°

1.4408
d4

d1
k

d2

DN Actuator L d1 d2 d4 k D E G Stroke Kvs-value Weight

(kg)
40 250 200 150 18 88 110 238 389 G1/4" 25 25 17
50 250 230 165 18 102 125 238 385 G1/4" 25 40 19,2
Dimensions in mm
 Flanged Valve 7032
reinforced design
Dimensions and Weights, flanges ANSI #150

G
E

2"
ANSI 150
d4

d1
k
Text and pictures are not binding. We reserve the right, to alter the equipment.

d2
L

body ANSI 150 flanges, dimensions acc. ANSI/ISA - 75.08.01

DN Actuator L d1 d2 d4 k D E G Stroke Kvs-value Weight

(kg)
40 250 222 127 15,7 73,2 98,6 238 389 G 1/4" 25 25 16,1
50 250 254 152,4 19,1 91,9 102,7 238 385 G 1/4" 25 40 19
Dimensions in mm

Data sheet 7032e /Version: 18.05.2017