Scribd
Upload
632 views1 page

Mewp Pre-Use Inspection Checklist: Machine: Week Commencing

This document contains: 1) A pre-use inspection checklist for MEWP equipment that includes checking documentation, wheels/tyres, engine/power source, hydraulics, hoses/cables, outriggers/stabilizers, and performing visual and function checks. 2) A table to record inspection results for each day of the week. 3) A statement that any faults or defects should be reported immediately to a supervisor and that only trained operators should use the equipment.

Uploaded by

jillianix
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
632 views1 page

Mewp Pre-Use Inspection Checklist: Machine: Week Commencing

This document contains: 1) A pre-use inspection checklist for MEWP equipment that includes checking documentation, wheels/tyres, engine/power source, hydraulics, hoses/cables, outriggers/stabilizers, and performing visual and function checks. 2) A table to record inspection results for each day of the week. 3) A statement that any faults or defects should be reported immediately to a supervisor and that only trained operators should use the equipment.

Uploaded by

jillianix
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MEWP PRE-USE INSPECTION CHECKLIST

All checks should be conducted in accordance with the manufacturer's manual 1 Current thorough examination certificate (within last six months) Manufacturer's operator manual Rescue plan Wheel security (nuts, retainers: loose, damaged, missing) Tyre pressure (pneumatic, foam filled or solid) Cuts, splits, exposed braiding, damaged rims Fluid levels (engine oil, coolant, fuel) Fluid leakage on ground and around engine Battery (electrolyte, security and charging plug condition)

MACHINE:
MONDAY TUESDAY WEDNESDAY

WEEK COMMENCING:
THURSDAY FRIDAY SATURDAY SUNDAY

Documentation

2 3 4

Wheels/tyres

5 6 7 8 9

Engine/power source Hydraulics Hoses and cables Outriggers, stabilisers

VISUAL CHECKS

10 Hydraulic fluid level 11 Leaks (hoses, pipe connections, rams, cylinders) 12 Security and condition (cuts, chaffing, bulges) 13 Power track cable trays (free from damage and debris) 14 General condition, pins/retainers, footplate 15 Spreader plates (present, condition, secure for travel) 16 Interlocks (functioning, engaged) 17 General condition (damage, misalignment, corrosion)

Chassis, boom 18 Cracks in weld and scissor pack 19 Pins, retainers and chains (security, signs of wear)
20 Canopies, guards, engine covers (security and condition) 21 Steps for access/egress (secure, undamaged, clear) 22 Entrance gate, guard rails and retaining pins 23 Harness anchor points 24 Clear of rubbish, debris and obstructions 25 ID plate, safety, warning and information decals (legible) 26 Controls (identification decals, directional arrows) 27 Platform loads (SWL, max. wind speed, max. number of persons)

Platform or cage

Decals and signage

G
28 Security device (power isolator, keypad, smart card) 29 Function enable (ignition key, foot switch, hold to run device)

FUNCTION CHECKS

30 Emergency stops and emergency lowering system 31 All switches, function controls (move freely, do not stick)

Using Ground (G) and Platform(P) controls

32 Lifting functions (raise, lower, slew, tele-out, tele-in) 33 Travel functions (forward, reverse, steer, brakes) 34 Elevated drive speed (reduced or prevented) 35 Lights, beacons, warning devices 36 Alarms (tilt, descent and travel) 37 Limit switches (e.g. descent, load, outreach, rotation) 38 Pothole protection device (fully deploys and retracts) 39 Oscillating axle locks, extending axles 40 Accessories, power to platform, extending decks 41 Jacks-legs, stabilisers, outriggers, levelling devices

ALL FAULTS AND DEFECTS TO BE REPORTED IMMEDIATELY TO YOUR SUPERVISOR Only persons who are trained and authorised by their employer should operate this equipment.

Initialled:

Initialled:

Initialled:

Initialled:

Initialled:

Initialled:

Initialled:

OPERATOR NAME(S) AND PAL CARD NUMBER(S):

You might also like