H18JAN/01
Reflector Compass
SR-165
SAURA
Navigation Instruments
Class A Magnetic Compass to meet with ISO 449
Saura SR-165 is a Reflector Magnetic Compass designed for sea navigation, complying with the relevant IMO and other major Authority requirements such as; ISO-449(1997), ISO-694(2000), ISO-1069(1973), ISO-2269(1992) and IEC-609452002. COMPASS BOWL Precision directional system design; Card dia. 165mm Pivot bearings: iridium and sapphire Long lasting inner paint finish, without blister, cracks or discolouring over a long period of time Unique bowl design to absorb liquid expansion for leakage and air bubble free operation BINNACLE STAND Full deviation correcting facility including; B, C & Heeling error compensation, Quadrantal correctors and Flinders bars Illumination of compass card with dimmer control Dual power supply; 100, 110, 200, or 220VAC & 24VDC Light in weight for ease of shipyard installation PERISCOPE Telescopic with vertical length of 720mm as standard. Longer telescopic length available on request INTL TYPE APPROVAL CERTIFICATE: being applied for MED and other Maritime Authorities
Standard accessories Reflector compass bowl Periscope/optics
Optional Accessories
Card dia 165mm Length 680mm as standard (Longer length available; 820mm, 960mm and 1100mm) Dimmer control; 24VDC, 10w and dual current 100, 110, 200 or 220VAC Cover sheet Canvas w/Tie down strings Installation materials Gasket, bolts & nuts Shadow pins 140mm length, 2 pcs (supplied with Azimuth 100mm length, 1 pce Device AD-02) Pin stand, 1 pce Deviation adjusting Correcting magnets; accessories Strong 10 x 140mm, 10 pcs Weak 10 x 140mm, 6 pcs D Correcting plates, 10 pcs Flinderss bars, 5 pcs Spare parts Electric bulb, 4 pcs Optional accessories Azimuth device AD-02 Spare bowl in wooden box TMC sensor w/NMEA output
Spare bowl
SCP-NT Sensor for transmitting compass capability
Azimuth device AD-02
Distributed by:
SAURA KEIKI SEISAKU-SHO CO., LTD.
TOP NAME IN RELIABILITY SINCE 1916
Saitama, Japan
Overseas enquiries to:
TEL:+81 33256 8549 FAX:+81 33256 8540
H18JAN/01
Accessories for
SR-165
SCP-NT Smart Sensor
Some of the outstanding features are; NMEA Serial data output for direct input to navigational instruments SCP-NT provides heading reference output in NMEA compatible serial sentence format. No interface or junction box is required. A choice of HDM and HDT sentences With inner short-pin arrangements, you can select either HDM or HDT output. Fine adjustment capability SCP-NT is fitted with a trim adjustment control, which makes it possible to adjust its output for trim outset of +/ 10 degrees if necessary. Small and light in weight Precision detector/sensing unit and modern electronics for processing the signal all contained in a small low profile enclosure, ensuring the clear visibility of compass card. Acrylic mounting base for simple and easy attachment on to Saura range of magnetic compasses SCP-NT will be mounted over the top surface glass of a magnetic compass, thus it is always free from interference which may caused by deviation correcting magnets beneath the compass bowl.
SAURA
Navigation Instruments
SCP-NT is a pick-off sensor/detector which directly mounts on Saura range of magnetic compasses and provides the magnetic heading reference output to offer TMC capability.
Specifications Power supply 12VDC 15VDC Current drain 120mA typical (under no load) Output data NMEA-HDM or NMEA-HDT; selectable by inner-short pins Output cycle 200mS average (fixed) Azimuth 1 deg average at 12 cardinal accuracy points, max 2 deg Resolution min. 0.3 deg Follow-up speed max. 45 deg/sec Ambient 10 to +50 deg Celcius temperature Dimensions & 88mm , 25mm height, 200 grs weight (mounting plate not included)
49 6 1
0.4 A +/-
20
15 DEG
34 (2-2.6DIA)
* 2 - 3.4 DIA
COMPASS TOP SURFACE
REMOVE SCREWS UNDER THIS HOLE
COMPASS MODEL SR-165/MR-165C T-150 MR-150/T-180 T-150 T-130 T-130
189mm 209mm 149mm 189mm 149mm
15 5.7
M3 Terminal 6P
SECURING SCREW WIRING DIAGRAM
25
SENSOR SCP-NT 1 2 3 4 5 6
M3 Terminal 6P GRN HDM (C) WHT HDM (H) RED +12V BLK GND (C) YLW (NOT USED) SHIELD
COMPASS BOWL REMOVE SCREWS BEHIND THE HOLES OF MOUNTING PLATES AND FIX THE SENSOR WITH THE SCREWS PROVIDED.
MAG.COMPASS
NO.3,4 & 2,(1) WIRES TO BE CONNECTED TO NAV.EQUIPMENT
Specifications to change without prior notice.
