Helicoil tap chart, helicoil tapping chart , helicoil tap size, helicoil tapping size, helicoil
Page 1 of 2
Download Product Catalogues
Helicoil Tapping Chart
The minimum tapping depths shown below (Dimension H) are the MINIMUM for countersunk
holes and insert set-down of 1-1/2 pitch maximum. The calculation for Dimension H is:
H is equal to insert nominal length +1 Pitch.
The tapped hole must be held within the stated pitch diameter limits for the required class of
fit for the installed Heli-Coil insert.
HeliCoil Technical
Catalogue
HeliCoil Professional Kits
HeliCoil After Market Kits
When anodize, Iridite or other finishes are used, all tapped hole dimensions must be met
after the finishes are applied.
Helicoil Tapping Data - Metric
Heli-Coil taps in various types and styles produce holes for Tolerance Classes 4H5H or 3B and 5H or 2B for use in the general range of
aluminums, magnesiums, mild steels, free machining stainless steels and other free machining materials. Conventional shop practice and
production procedures, speeds, feeds and lubricants should be used in combination with proper fixturing and good tapping machines or tapping
heads. The tapped hole must be held within the stated pitch diameter limits for the required Tolerance Class of fit for the installed Heli-Coil
insert. For Standard (free running inserts), a tolerance class 5H or 2B is recommended. For Screw- Lock inserts, a tolerance class 4H5H or 3B is
recommended in order to develop higher locking torques.
http://www.noblefix.com/helicoil/HeliCoil-Tapping-Chart.html
8/30/2013
Helicoil tap chart, helicoil tapping chart , helicoil tap size, helicoil tapping size, helicoil
Page 2 of 2
helicoil, helicoil insert, helicoil inserts, heli-coil, helicoil tap, helicoil insertion tool, helicoil removal tool, helicoil thread chart, helicoil drill chart,
helicoil thread gauge, helicoil kit, helicoil tool kit, helicoil thread repair kit, NASM21209,MS21209 ,NASM33537,MS33537 ,MS122076 to
MS124831,NAS1130, LN9039,LN9039A, LN9499 ,LN9499A,DIN8140, MS122076 to
MS124831,MA3279 ,MA3280 ,MA3281 ,MA3329 ,MA3330 ,MA3331, SAE8879, BACi12AE,AGS3600, AGS3700, AGS4677, AS6733, AS6734 ,
AS8455 ,AS8456 ,AS3094 AS3095,AS3096, AS3097, GE N926, N926A ,N926B ,N926C, helicoil tool holder,helicoil tool set ,wire thread insert,
self locking insert, screw locking insert
Helicoil
Helicoil Thread Repair Kit - Metric
Helicoil Thread Repair Kit - Inch
Helicoil Tool Kit
Helicoil Kit
Helicoil Metric Kit
Helicoil Inch Kit
Helicoil Aerospace
Helicoil Insert
Helicoil Inserts
Helicoil Size Chart
Helicoil Drill Chart
Helicoil Tapping Chart
Helicoil Thread Gauge
Heli-coil Aerospace
Helicoil Tangless Insert
Helicoil Aerospace Part
Helicoil Insertion Tool
Helicoil STI Tap
Helicoil Tang Breack off Tool
Helicoil Extraction Tool
Helicoils Aerospace
Disclaimer | Privacy Policy | Terms | Sitemap
Noble Aerospace Private Limited. 2010 | Privacy policy
http://www.noblefix.com/helicoil/HeliCoil-Tapping-Chart.html
Designed & Developed by Satya Web Solutions
8/30/2013
