Belec Compact Port
Mobile Spectrometer for Metal Analysis
PrA4_Belec-BCP-1008-DE+GB-K1.indd 3
11.08.2010 12:04:55 Uhr
Specifications
easy handling
mobility by trolley
easy transportation
user friendly Software Belec Win 21
analysis of P and S with Special Sparking Probe
quick mix-up checking with Air Sparking Probe
high accuracy grade (C < 0,01%)
connectable measuring stand
adapters for the most different sample shapes
installation and instruction by qualified personnel
The Smallest of its Kind
High performance combined with easy handling makes
the spectrometer a reliable analysis instrument for quality
assurance.
The Belec Compact Port spectrometer offers a variety of
application possibilities. Whether it is used for measurings in
production areas, on pipes in construction sites or on scrap yards
- moving from one application to another is no problem for the
instrument with its heat-stabilised climatic chamber.
The double spectrometer enables the use of the most ideal
spectral lines. This small instrument can be configured for
several bases (e.g. Fe, Ni, Al, Cu, Co, Ti).
High Standard Mobile Metal Analysis
Within only a few seconds you can detect and analyze up to 70
elements in metals.
With accurate sample preparation, mobile spectrometers show
the same exact analysis results as the stationary instruments.
They are all-purpose and there is hardly no analytical task which
cant be resolved no matter where or what sample shape.
More Flexibility: The Belec Probe Connector
The special Belec probe connector permits a very fast exchange of the different probes. Together
with the possibility to connect a special measuring stand, the instrument grants a high versatility.
PrA4_Belec-BCP-1008-DE+GB-K1.indd 4
11.08.2010 12:05:05 Uhr
Belec Compact Port
Mobile Spectrometer for Metal Analysis
argon-flushed sparking probe incl. C-analysis
argon-flushed sparking probe incl. P+S-analysis
Unique Option:
probe connector system
quick mix-up checking
multi fibre quartz optics, 3m + 5m
adapters for tubes, wires + small parts
Make the best use of the characteristics of a stationary instrument even
with the Belec Compact Port. Ready for
use in no time!
non-destructive material testing
More Flexibility, Constant Quality
It offers versatile opportunities for the most different areas. Measurings are made
with our special sparking probes and the results are displayed on the screen
immediately.
In addition to other elements, the carbon content can be analyzed less than
0,01%. The Argon Special Probe allows the analysis of short wavelengths of
Phosphor and Sulphur by a small spectrometer which is integrated in the probe.
The air probe comes into operation for quick mix-up checking and achieves
inspection cycles of less than three seconds.
PrA4_Belec-BCP-1008-DE+GB-K1.indd 5
11.08.2010 12:05:15 Uhr
Documentation Made Easy
Belec Compact Port
Our software Belec WIN 21 convinces its users: easy
to handle, always up-to-date and best operation
conditions by clear arrangements. Measuring
values and statistics are displayed at the touch of a
button and can then be printed out or archived.
Mobile Spectrometer for Metal Analysis
Precise Material Analysis and Quick Mix-Up Checking with
the Mobile Spectrometer Belec Compact Port
Laboratory-like results and maximum flexibility by versatile possibilities
for different application areas.
The smallest spectrometer of its kind combines high performance
with easy handling the reliable system for quality assurance.
This is mobile metal analysis at the highest level, not depending on the
place of analysis or shape of sample.
The analysis values can be easily filed in a local
network via Ethernet connection.
Technical Data
Optics
double spectrometer in Paschen-Runge mounting
Rowland circle diameter 300 mm
usable wavelengths 190-410 nm, 220-430 nm
groove 3600 lines/mm
reciprocal dispersion 0,9 nm/mm (1st order)
shock resistance
temperature stabilised photoelectric cells
Probes
argon-flushed sparking probe for exact analysis,
including carbon
argon flow 0,1 l / min in standby and 2,5 l / min when
analysing
argon control on cable socket
air probe for quick mix-up checking
adapters for wires, pipes and small parts available for
all probes
lightweight shockproof plastic probe housing
start and clear buttons easily hand-operated
signal on mix-up identification: visual display for
repeat and reject, start button is blocked until
confirm button is pressed
multi fibre quartz optics, standard lengths 3m or 5m
low-wear tungsten electrode
silver electrode for air probe
probe connector system
Source
sparking generator with maximum 400 Hz frequency
unipolar discharge
separate parameter for pre-sparking and integration
selectable via software
ignition frequency program specifically selectable
via software
discharge power program specifically selectable
via software
arc source for air probe, optional
ignition voltage 20 kV
Connectable Measuring Stand
argon-flushed measuring stand for exact analysis
argon flow 0,1 l / min in stand-by and 2,5 l / min
when analysing
connector system incl. argon control on cable socket,
device-independent
sparking stand grounded with 10mm analysis
opening, optionally with ceramic insert
for samples of 4mm minimum
adapters for wires, pipes and small parts available
low-wear tungsten electrode
pneumatic sample clamping
Electronics
stabilised high voltage
zero-stabilised analogue amplifier
6-decade dynamic A-D converter for each channel
36 channels with digital integration, configurable for
several bases
Dimensions
width
height
depth
14.2 in. (360 mm)
7.9 in. (200 mm)
16.5 in. (420 mm)
Weight
analysis unit
special probe
argon probe
air probe
measuring stand
37.5 lbs. (17,00 kg)
2.9 lbs. ( 1,30 kg)
2.1 lbs. ( 0,95 kg)
1.8 lbs. ( 0,80 kg)
20.0 lbs. ( 9,50 kg)
Power Supply
230V/50Hz or 110V/60Hz
100W in stand-by mode
600W during analysis
Computer Hardware
system-integrated industrial computer system
Intel Celeron M 1.0 GHz with real time clock
1 GB RAM minimum
2.5 hard disk 60 GB minimum
10.4TFT colour display
touch screen
special dust and moisture protected keyboard integrated in hinged lid
USB 2.0 ports
Ethernet interface RJ45*
Belec Spektrometie
Opto-Elektronik GmbH
Hamburger Str. 12
49124 Georgsmarienhtte
Deutschland / Germany
Fon +49 5401 8709-0
Fax +49 5401 8709-28
info@belec.de
www.belec.de
Belec WIN 21 Analysis and
Quality Control Program
Software
arbitrary operating system,
e.g. MS Windows XP
Remote-Service-System
display of analysis values at each
measurement
as many analysis programs to customer
specifications as required
individual analysis parameters
for each program
automatic program selection (APF)
analysis computation with: background correction, curve position correction, additive
and multiplicative inter-element correction
automatic correction with standard types
easy and simultaneous recalibration of
several programs
mix-up checking by comparison with
reference measurement
grade checking by comparison with analysis
regulations
type calibration and type measurement
tolerances for every analysis program and
element in absolute and relative weight
percentages, individually adjustable
average and standard deviation from chosen
measurements
warning signal, when calibration curve is
exceeded
automatic reminder of regular recalibration
automatic display of quality description or
material number
alloy data bank, 100.000 qualities and more
storable (only limited by computer storage
capacity)
text size on monitor variable for optimum
legibility
protocol storage function
report memory function for later analysis,
printing and archiving
several statistic functions with graphical
representation
08.2010 / BCP-GB1a / Subject to technical modifications
PrA4_Belec-BCP-1008-DE+GB-K1.indd 7
11.08.2010 12:05:33 Uhr
