ASME/ANSI B16.
15 - 1985 (R1994) - Cast Bronze Threaded Fittings
This Standard pertains primarily to cast Class 125and Class 250 bronze threaded pipe fittings.
Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps. This
Standard covers:
ASME/ANSI B16.12 - 1998 - Cast Iron Threaded Drainage Fittings
This Standard for cast iron threaded drainage fittings covers:
(a) size and method of designating openings in reducing fittings
(b) marking
(c) materials
(d) dimensions and tolerances
(e) threading
(f) ribs
(g) coatings
(h) face bevel discharge nozzles, input shafts, base plates, and foundation bolt holes
(see Tables 1 and 2).
ASME/ANSI B16.14 - 1991 - Ferrous Pipe Plugs, Bushings and Lock-nuts
with Pipe Threads
This Standard for Ferrous Pipe Plugs, Bushings, and Lock-nuts with Pipe Threads covers:
(a) pressure-temperature ratings:
(b) size;
(c) marking;
(d) materials;
(e) dimensions and tolerances;
(f) threading; and
(g) pattern taper.
ASME/ANSI B16.15 - 1985 (R1994) - Cast Bronze Threaded Fittings
This Standard pertains primarily to cast Class 125and Class 250 bronze threaded pipe fittings.
Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps. This
Standard covers:
ASME/ANSI B16.9 - 2001 - Factory-Made Wrought Steel Butt-welding
Fittings
This Standard covers overall dimensions, tolerances, ratings, testing, and markings for wrought
factory-made butt-welding fittings in sizes NPS 1/2 through 48 (DN 15 through 1200).
ASME/ANSI B16.10 - 2000 - Face-to-Face and End-to-End Dimensions of
Valves
This Standard covers face-to-face and end-to-end dimensions of straightway valves, and
center-to face and center-to-end dimensions of angle valves. Its purpose is to assure installation
interchangeability for valves of a given material, type size, rating class, and end connection
ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and
Threaded
This Standard covers ratings, dimensions, tolerances, marking and material requirements for
forged fittings, both socket-welding and threaded.
ASME/ANSI B16.12 - 1998 - Cast Iron Threaded Drainage Fittings
This Standard for cast iron threaded drainage fittings covers:
(a) size and method of designating openings in reducing fittings
(b) marking
(c) materials
(d) dimensions and tolerances
(e) threading
(f) ribs
(g) coatings
(h) face bevel discharge nozzles, input shafts, base plates, and foundation bolt holes
(see Tables 1 and 2).
ASME/ANSI B16.14 - 1991 - Ferrous Pipe Plugs, Bushings and Lock-nuts
with Pipe Threads
This Standard for Ferrous Pipe Plugs, Bushings, and Lock-nuts with Pipe Threads covers:
(a) pressure-temperature ratings:
(b) size;
(c) marking;
(d) materials;
(e) dimensions and tolerances;
(f) threading; and
(g) pattern taper.
ASME/ANSI B16.15 - 1985 (R1994) - Cast Bronze Threaded Fittings
This Standard pertains primarily to cast Class 125and Class 250 bronze threaded pipe fittings.
Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps. This
Standard covers:
(a) pressure-temperature ratings;
(b) size and method of designating openings of reducing pipe fittings;
(c) marking;
(d) minimum requirements for casting quality and materials;
(e) dimensions and tolerances in U.S. customary and metric (SI) units;
ASME/ANSI B16.15 - 1985 (R1994) - Cast Bronze Threaded Fittings
This Standard pertains primarily to cast Class 125and Class 250 bronze threaded pipe fittings.
Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps. This
Standard covers:
ASME/ANSI B16.12 - 1998 - Cast Iron Threaded Drainage Fittings
This Standard for cast iron threaded drainage fittings covers:
(a) size and method of designating openings in reducing fittings
(b) marking
(c) materials
(d) dimensions and tolerances
(e) threading
(f) ribs
(g) coatings
(h) face bevel discharge nozzles, input shafts, base plates, and foundation bolt holes
(see Tables 1 and 2).
ASME/ANSI B16.14 - 1991 - Ferrous Pipe Plugs, Bushings and Lock-nuts
with Pipe Threads
This Standard for Ferrous Pipe Plugs, Bushings, and Lock-nuts with Pipe Threads covers:
(a) pressure-temperature ratings:
(b) size;
(c) marking;
(d) materials;
(e) dimensions and tolerances;
(f) threading; and
(g) pattern taper.
ASME/ANSI B16.15 - 1985 (R1994) - Cast Bronze Threaded Fittings
This Standard pertains primarily to cast Class 125and Class 250 bronze threaded pipe fittings.
Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps. This
Standard covers:
ASME/ANSI B16.9 - 2001 - Factory-Made Wrought Steel Butt-welding
Fittings
This Standard covers overall dimensions, tolerances, ratings, testing, and markings for wrought
factory-made butt-welding fittings in sizes NPS 1/2 through 48 (DN 15 through 1200).
ASME/ANSI B16.10 - 2000 - Face-to-Face and End-to-End Dimensions of
Valves
This Standard covers face-to-face and end-to-end dimensions of straightway valves, and
center-to face and center-to-end dimensions of angle valves. Its purpose is to assure installation
interchangeability for valves of a given material, type size, rating class, and end connection
ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and
Threaded
This Standard covers ratings, dimensions, tolerances, marking and material requirements for
forged fittings, both socket-welding and threaded.
ASME/ANSI B16.12 - 1998 - Cast Iron Threaded Drainage Fittings
This Standard for cast iron threaded drainage fittings covers:
(a) size and method of designating openings in reducing fittings
(b) marking
(c) materials
(d) dimensions and tolerances
(e) threading
(f) ribs
(g) coatings
(h) face bevel discharge nozzles, input shafts, base plates, and foundation bolt holes
(see Tables 1 and 2).
