Product Information
MICRODUR MIC 10 - Portable hardness tester (UCI)
Range of application
Advantages and features
Rapid hardness tests, simple handling and a high degree
of test safety.
Light, transportable hardness tester with a digital
display for hardness tests with Vickers diamonds to
the UCI method
The MIC 10 works to the UCI method of measurement
(Ultrasonic Contact Impedance). The UCI method
enables rapid and comfortable measurements: Apply the
probe Read off the test data. The Vickers diamonds
indentation in the material surface is measured
electronically and is immediately displayed digitally as a
hardness value. Without, for example, having to make
optical evaluation via a microscope.
Hardness testing with the MIC 10 returns information on
mechanical properties and wear resistance of steel, as
well as on aging processes on metallic parts such as
cutting tools.
The tensile strength is determined for material selection
and identification tests in structural steel engineering and
distribution. Applications include evaluation of welding
seams for containers and pipelines, numerous
components and parts, such as ball bearings, shafts,
bolts, extrusion parts, toothed wheels, etc., are tested in
mechanical engineering.
Simple operation and practical functions
You can select whether a single measurement or the
actual arithmetic average is to be displayed at the
touch of a button
Suspect single results can be corrected without any
problems without having to cancel the measurement
row
Adjustable alarm threshold settings indicate critical
measured values both optically and acoustically
Functions that arent required are simply locked,
either the different hardness scales or the adjustment
possibilities
The MIC 10 can be adapted precisely to the
respective application
Background lighting can be switched on and off
PI 453 2.0504
Measurement probes with different weights are available
for different material surfaces: For finished surfaces as
well as for coarse grained or rough surfaces.
The adjustment parameters for measurements on low
alloy and non-alloyed steel are already pre-programmed
in the MIC 10. The MIC 10 can be quickly and easily
readjusted for other materials.
Measurement range to Vickers: 20 HV - 1740 HV
Automatic conversion to DIN 50150 and ASTM E 40
in HV (Vickers), HB (Brinell), HRC (Rockwell C), and
HRB (Rockwell B)
Wide range of accessories, e.g. manual
measurement probes for test loads from
10 N to 98 N
Product Information
MICRODUR MIC 10 - Portable hardness tester (UCI)
Order item
Measurement range
Weight
Dimensions
Temperature range
Test method
Conversion scale
Display
Current supply
Duration of operation
Interface
Statistics
H07.MIC10.00
Value
Unit
20 - 1740
HV (Vickers)
approx. 300
g
approx. 160 x 70 x 45 (W x H x D)
mm
Operation: - 15 ... + 55
C
Storage: - 20 ... + 60
C
Hardness test with Vickers indenter (136 pyramid diamant).
Analysis of test indentation using UCI method under load.
HV, HB, HRC, and HRB, referring to DIN 50150, ASTM E 140
N/mm2 (only at 98 N probe)
4-digit LCD with background illumination
2x 1.5 V Mignon
approx. 15 h without illumination
RS232 C bidirectional
Display of mean value
Accessories
Description
50 N (load force)
10 N, 98 N
Carry and setup device
Standard hand probe
Hand probes
(also elongated or shortened)
With shoulder strap and holder
for a manual measurement probe
Further accessories on request
All data at ambient temperature.
All rights reserved.
Order item
H07.MIC10.205A
On request
H07.MIC10.1040
